E. M. Greitzer, C. S. Tan, M. B. Graf, Internal Flow: Concepts and Applications, Cambridge University Press, 2004.
Greitzer, E.M., Abernathy, F.H., "Film Boiling on Vertical Surfaces," Int. J. Heat & Mass Transfer, Vol. 15, pp. 475-491, March 1972.
Greitzer, E.M., Technical Comment on "Attenuation of Inlet Flow Distortion Upstream of Axial Flow Compressors," J. Aircraft, Vol. 9, pp. 511-512, July 1972.
Greitzer, E.M., "Upstream Attenuation and Quasi-Steady Rotor Lift Fluctuations in Asymmetric Flows in Axial Compressors," ASME Paper 73-GT-30, April 1973.
Greitzer, E.M., "A New Exact Solution for Compressible Swirling Flow," Aeronautical Quarterly, Vol. 26, pp. 297-304, November 1975.
Greitzer, E.M., Griswold, H.R., "Compressor-Diffuser Interaction with Circumferential Flow Distortion," J. Mech. Eng. Sci., Vol. 18, pp. 25-38, February 1976.
Greitzer, E.M., "Surge and Rotating Stall in Axial Flow Compressors, Part I: Theoretical Compression System Model," ASME J. Eng. for Power, Vol. 98, pp. 190-198, April 1976.
Greitzer, E.M., "Surge and Rotating Stall in Axial Flow Compressors, Part II: Experimental Results and Comparison with Theory," ASME J. Eng. for Power, Vol. 98, pp. 199-217, April 1976.
Horlock, J.H., Greitzer, E.M., Henderson, R.E., “The Response of Turbomachine Blades to Low Frequency Inlet Distortions," ASME J. Eng. for Power, Vol. 99, April 1977, pp. 195-203.
Greitzer, E.M., “Coupled Compressor-Diffuser Flow Instability," J. Aircraft, Vol. 14, March 1977, pp. 233-238.
Day, I.J., Greitzer, E.M., Cumpsty, N.A., “Prediction of Compressor Performance in Rotating Stall," ASME J. Eng. for Power, Vol. 100, January 1978, pp. 1-14.
Greitzer, E.M., Fulkerson, D.A., Mazzawy, R.S., “Flow Field Coupling Between Compression System Components in Asymmetric Flow," ASME J. Eng. for Power, Vol. 100, January 1978, pp. 66-72.
Greitzer, E.M., Strand, T., “Asymmetric Swirling Flows in Turbomachine Annuli," ASME J. Eng. for Power, Vol. 100, October 1978, pp. 618-629.
Greitzer, E.M., Nikkanen, J.P., Haddad, D.H., Joslyn, H.D., Mazzawy, R.S., “A Fundamental Criterion for the Application of Rotor Casing Treatment," ASME J. Fluids Eng., Vol. 101, June 1979, pp. 237-243.
Greitzer, E.M., Hawthorne, W.R., “Generation of Streamwise Vorticity in an Asymmetric Swirling Flow," J. Mech. Eng. Science, Vol. 22, February 1980, pp. 41-42.
Greitzer, E.M., “Review - Axial Compressor Stall Phenomena," ASME J. Fluids Eng., Vol. 102, June 1980, pp. 134-152.
Greitzer, E.M., “A Note on the Non-Existence of Secondary Flows," ISME J. Thermal Eng., Vol. 1, No. 1, January-March 1980, pp. 1-7.
Greitzer, E.M., “The Stability of Pumping Systems - The 1980 Freeman Scholar Lecture," ASME J. Fluids Eng., Vol. 103, June 1981, pp. 193-242.
Cumpsty, N.A., Greitzer, E.M., “A Simple Model for Compressor Stall Cell Propagation,"ASME J. Eng. Power, Vol. 104, January 1982, pp. 170-176.
DeSiervi, F., Viguier, H.C., Greitzer, E.M., Tan, C.S., "Mechanisms of Inlet-Vortex Formation," J. Fluid Mechanics, Vol. 124, pp. 173-207, November 1982.
Horlock, J.H., Greitzer, E.M., “Non-Uniform Flows in Axial Compressors Due to Tip Clearance Variations," J. Mech. Eng. Science, 197C, September 1983, pp. 173-178.
Cheng, P., Prell, M.E., Greitzer, E.M., Tan, C.S., “Effects of Compressor Hub Treatment on Stator Stall Margin and Performance," J. Aircraft, Vol. 21, 1984, pp. 409-476.
Liu, W., Greitzer, E.M., Tan, C.S., “Surface Static Pressures in an Inlet Vortex Flow Field," ASME J. Eng. for Power, Vol. 107, April 1985, pp. 387-394.
Greitzer, E.M., Paterson, R.W., Tan, C.S., “An Approximate Substitution Principle for Viscous, Heat Conducting Flows," Proc. Roy. Soc. London, Series A, Vol. 401, 1985, pp. 163-193.
Tan, C.S., Greitzer, E.M., "Non-Axisymmetric Compressible Swirling Flow in Turbomachine Annuli," AIAA J., Vol. 24, No. 1, pp. 92-100, January 1986.
Moore, F.K., Greitzer, E.M., “A Theory of Post-Stall Transients in Axial Compression Systems, Part I: Development of Equations," ASME J. Eng. for Gas Turbines and Power, Vol. 108, January 1986, pp. 68-76.
Greitzer, E.M., Moore, F.K., “A Theory of Post-Stall Transients in Axial Compression Systems, Part II: Applications," ASME J. Eng. for Gas Turbines and Power, Vol. 108, April 1986, pp. 231-240.
Shin, H.W., Greitzer, E.M., Cheng, M.K., Tan, C.S., Shippee, C.L., “Circulation Measurements and Vortical Structure in an Inlet Vortex Flow Field," J. Fluid Mechanics, Vol. 162, January 1986, pp. 463-487.
Shin, H.W., Cheng, W.K., Greitzer, E.M., Tan, C.S., “Inlet Vortex Formation Due to Intensification of Ambient Vorticity," AIAA Journal, Vol. 24, No. 4, April 1986, pp. 687-689.
Koff, S.G., Greitzer, E.M., “Axisymmetrically Stalled Flow Performance for Multistage Axial Compressors," ASME J. Turbomachinery, Vol. 108, 1986, pp. 216-223.
Hynes, T.P., Greitzer, E.M., “A Method for Assessing Effects of Circumferential Flow Distortion on Compressor Stability," ASME J. Eng. for Gas Turbines and Power, Vol. 109, July 1987, pp. 371-379.
Johnson, M.C., Greitzer, E.M., “Effects of Slotted Hub and Casing Treatments on Compressor Endwall Flow Fields," ASME J. Turbomachinery, Vol. 109, July 1987, pp. 380-387.
Epstein, A.H., Ffowcs Williams, J.E., Greitzer, E.M., “Active Suppression of Aerodynamic Instabilities in Turbomachines," J. of Propulsion and Power, Vol. 5, No. 2, March-April 1989, pp. 204-211.
Chue, R., Hynes, T.P., Greitzer, E.M., Tan, C.S., Longley, J.P., “Calculations of Inlet Distortion Induced Compressor Flowfield Instability," Int. J. Heat and Fluid Flow, Vol. 10, No. 3, September 1989, pp. 211-223.
Lee, N.K.W., Greitzer, E.M., “Effects of Endwall Suction and Blowing on Compressor Stability Enhancement," ASME J. Turbomachinery, Vol. 112, January 1990, pp. 133-144.
Simonich, J., Amiet, R.K., Schlinker, R.A., Greitzer, E.M., “Rotor Noise Due to Atmospheric Turbulence Ingestion: Part I - Fluid Mechanics," J. Aircraft, Vol. 27, No. 1, Jan. 1990, pp. 7-14.
Gamache, R.N., Greitzer, E.M., “Reverse Flow in Multistage Compressors," J. Propulsion and Power, Vol. 6, No. 4, July-August 1990, pp. 461-474.
Gysling, D.L., Dugundji, J., Greitzer, E.M., Epstein, A.H., “Dynamic Control of Centrifugal Compressor Surge Using Tailored Structure," ASME J. Turbomachinery, Vol. 113, October 1991, pp. 710-722.
Garnier, V.H., Epstein, A.H., Greitzer, E.M., “Rotating Waves as a Stall Inception Indication in Axial Compressors," ASME J. Turbomachinery, Vol. 113, April 1991, pp. 290-302.
Chen, G.T., Greitzer, E.M., Tan, C.S., Marble, F.E., “Similarity Analysis of Compressor Tip Clearance Flow Structures," ASME J. Turbomachinery, Vol. 113, April 1991, pp. 260-271.
Pinsley, J.E., Guenette, G.R., Epstein, A.H., Greitzer, E.M., “Active Stabilization of Centrifugal Compressor Surge," ASME J. Turbomachinery, Vol. 113, October 1991, pp. 723-732.
Fink, D.A., Cumpsty, N.A., Greitzer, E.M., “Surge Dynamics in a Free-Spool Centrifugal Compressor System," ASME J. Turbomachinery, Vol. 114, April 1992, pp. 321-332.
Paduano, J.D., Greitzer, E.M., Epstein, A.H., Guenette, G.R., Gysling, D.L., Haynes, J., Hendricks, G.J., Simon, J.S., Valavani, L., "Smart Engines: Concepts and Applications," Integrated Computer-Aided Engineering, Vol. 1, No. 1, 1993, pp. 3-29.
Longley, J.P., Greitzer, E.M., "Inlet Distortion Effects in Aircraft Propulsion System Integration", AGARD Lecture Series 183 on "Steady and Transient Performance Prediction of Gas Turbine Engines", June 1992.
Adamczyk, J.J., Celestina, M., Greitzer, E.M., “The Role of Tip Clearance in High Speed Fan Stall," ASME J. Turbomachinery, Vol. 115, No. 1, January 1993, pp. 28-39.
Paduano, J., Epstein, A.H., Valavani, L., Longley, J.P., Greitzer, E.M., Guenette, G.R., “Active Control of Rotating Stall in a Low Speed Axial Compressor," ASME J. Turbomachinery, Vol. 115, No. 1, January 1993, pp. 48-56.
Simon, J.S., Valavani, L., Epstein, A.H., Greitzer, E.M., “Evaluation of Approaches to Active Compressor Surge Stabilization," ASME J. Turbomachinery, Vol. 115, No. 1, January 1993, pp. 57-67.
Crook, A.J., Greitzer, E.M., Tan, C.S., Adamczyk, J.J., "Numerical Simulation of Compressor Endwall and Casing Treatment Flow Phenomena", ASME J. Turbomachinery, Vol. 115, No. 3, July 1993, pp. 501-512.
Crawley, E.F., Greitzer, E.M., Widnall, S.E., Hall, S.R., McManus, H.L., Hansman, J.R., Shea, J.F., Landahl, M., “Reform of the Aeronautics and Astronautics Curriculum at MIT,” Journal of Engineering Education, Vol. 83, No. 1, January 1994, pp. 47-56.
Paduano, J., Valavani, L., Epstein, A.H., Greitzer, E.M., Guenette, G.R., “Modeling for Control of Rotating Stall,” Automatica, Vol. 30, No. 9, September 1994.
Greitzer, E.M., Tan, C.S., Wisler, D.C., Adamczyk, J.J., Strazisar, A.J., “Unsteady Flow in Turbomachines: Where’s the Beef?," presented at 1994 ASME Winter Annual Meeting, November 1994.
Greitzer, E.M., “Stability in Pumps and Compressors," section in Handbook of Fluids and Fluid Machinery, J. Schetz and A. Fuhs, Eds., John Wiley and Sons, 1996.
Waitz, I.A., Greitzer, E.M., Tan, C.S., “Vortices in Aero-Propulsion Systems,” Chapter XI in Fluid Vortices, S.I. Green, Ed., Kluwer Academic Publishers, 1995.
Gysling, D.L., Greitzer, E.M., “Dynamic Control Of Rotating Stall In Axial Flow Compressors Using Aeromechanical Feedback," ASME J. Turbomachinery, Vol. 117, 1995, pp. 307-319.
Longley, J.P., Shin, H-W, Plumley, R.E., Silkowski, P.D., Day, I.J., Greitzer, E.M., Tan, C.S., Wisler, D.C., “Effects of Rotating Inlet Distortion on Multistage Compressor Stability," ASME J. Turbomachinery, Vol. 118, No. 2, April 1996.
O’Sullivan, M.N., Waitz, I.A., Greitzer, E.M., Tan, C.S., Dawes, W.N., “A Computational Study of Viscous Effects on Lobed Mixer Flow Features and Performance,” AIAA Journal of Propulsion and Power, Vol. 12, No. 3, 1996, pp. 449-456.
Waitz, I.A., Qiu, Y.J., Manning, T.A., Fung, A.K.S., Elliot, J.K., Kerwin, J.M., Krasnodebski, J.K., O’Sullivan, M.N., Tew, D.E., Greitzer, E.M., Marble, F.E., Tan, C.S., Tillman, T.G., “Enhanced Mixing with Streamwise Vorticity,” Progress in Aerospace Science, Vol. 33, No. 5-6, pp. 323-351, 1997.
Greitzer, E.M., "Smart Jet Engines: Case History of a Multidisciplinary Research Program," JSME International Journal, Series B., Vol. 41, No. 1, pp. 90-102, 1998.
Graf, M.B., Wong, T.S., Greitzer, E.M., Marble, F.E., Tan, C.S., Shin, H.-W., Wisler, D.C., "Effects of Non-Axisymmetric Tip Clearance on Axial Compressor Performance and Stability," ASME J. Turbomachinery, Vol. 120, No. 4, pp. 648-661, 1998.
van Schalkwyk, C.M., Paduano, J.D., Greitzer, E.M., Epstein, A.H., "Active Stabilization of Axial Compressors with Circumferential Inlet Distortion," ASME J. Turbomachinery, Vol. 120, No. 3, pp. 491-439, 1998.
Weigl, H.J., Paduano, J.D., Frechette, L.G., Epstein, A.H., Greitzer, E.M., Bright, M.M., Strazisar, A.J., "Active Stabilization of Rotating Stall and Surge in a Transonic Single Stage Axial Compressor," ASME J. Turbomachinery, Vol.120, No. 4, pp. 625-636, 1998.
Hoying, D., Tan, C.S., Vo, H.D., Greitzer, E.M., "Role of Blade Passage Flow Structures in Axial Compressor Rotating Stall Inception," to appear in ASME J. Turbomachinery.
Khalid, S.A., Khalsa, A.S., Waitz, I.A., Tan, C.S., Greitzer, E.M., Cumpsty, N.A., Adamczyk, J., Marble, F.E., "Endwall Blockage in Axial Compressors, " ASME J. Turbomachinery, Vol. 121, No. 3, pp. 499-509, 1999.
Gong, Y., Tan, C.S., Gordon, K. A., Greitzer, E.M., "A Computational Model for Short Wavelength Stall Inception and Development in Multi-stage Compressors," ASME J. Turbomachinery, Vol. 121, No. 4 pp. 726-734, 1999.
Filipenco, V.G., Deniz, S., Johnston, J.M., Greitzer, E.M., Cumpsty, N.A., "Effects of Inlet Flow Field Conditions on the Performance of Centrifugal Compressor Diffusers Part 1: Discrete-Passage Diffuser," ASME J. Turbomachinery, Vol. 122, No. 1, pp. 1-10, January 2000.
Deniz, S., Greitzer, E.M., Cumpsty, N.A., "Effects of Inlet Flow Field Conditions on the Performance of Centrifugal Compressor Diffusers Part 2: Straight-Channel Diffuser," ASME J. Turbomachinery, Vol. 122, No. 1, pp. 11-21, January 2000.
Spakovsky, Z.S., Gertz, J.B., Sharma, O.P., Paduano, J.D., Epstein, A.H., and Greitzer, E.M., "Influence of Compressor Deterioration on Engine Dynamic Behaviors and Transient Surge Margin", ASME J. Turbomachinery, Vol. 122, No. 3, pp. 477-484, 2000.
Underwood, D.S., Waitz, I.A., and Greitzer, E.M., "Confined Swirling Flows with Heat Release and Mixing", J. Propulsion and Power, Vol. 16, No. 2, pp. 169-177, 2000.
Paduano, J. D., Greitzer, E. M., Epstein, A. H., “Compression System Stability and Active Control," Annual Rev. Fluid Mech., 33, pp. 491-517, 2001
Darmofal, D. L., Khan, R., Greitzer, E. M., Tan, C. S., “Vortex core behaviour in confined and unconfined geometries: a quasi-one-dimensional model," J. Fluid Mech. 449, pp. 61-84, 2001
Frey, D. D., Engelhardt, F., Greitzer, E. M., “A Role for One-Factor-at-a-Time Experimentation in Parameter Design," Research in Engineering Design, 2003
Cumpsty, N. A., Greitzer, E. M. “Ideas and Methods of Turbomachinery Aerodynamics: A Historical Review” invited survey paper in AIAA J. Propulsion and Power, 20, pp. 15-26, Jan-Feb 2004
Frey, D. D., and Greitzer, E. M., “One Step at a Time," ASME Mechanical Engineering, 126, July 2004, pp. 36-38
