 |
 |
|
|
 |
 |
 |
 |
---------------------------------------------------------------------------------------------
S. Mark Spearing
Professor of Aeronautics and Astronautics
Publications
Books
Papers in Refereed Journals
Conference Papers
Other Major Publications
| 1. |
2000 FALL MEETING PROCEEDINGS, Symposium EE, Materials Science of Microelectromechanical Systems (MEMS) Devices III, Editors: M. deBoer, M. Judy, H. Kahn, S.M. Spearing, MRS Proceedings, Volume 657, MRS Publishing, Philadelphia, PA., 2001
|
| 2. |
2001 FALL MEETING PROCEEDINGS, Symposium EE, Materials Science of Microelectromechanical Systems (MEMS) Devices IV, Editors: A. Ayon, T. Bucheit, H. Kahn, S.M. Spearing, MRS Proceedings, Volume 7XX, MRS Publishing, Philadelphia, PA., 2002
|
| 1. |
S. M. Spearing, P. W. R. Beaumont and M. F. Ashby, "Fatigue Damage Mechanics of Notched Graphite - Epoxy Laminates," Composite Materials: Fatigue and Fracture, Edited by T. K. O'Brien. ASTM STP 1110, 596-616, 1991.
|
| 2. |
S. M. Spearing and P. W. R. Beaumont, "Fatigue Damage Mechanics of Composite Materials I: Experimental Measurement of Damage and Post-Fatigue Properties," Composite Science and Technology, 44, 159-168, 1992.
|
| 3. |
S. M. Spearing, P. W. R. Beaumont and M. F. Ashby, "Fatigue Damage Mechanics of Composite Materials II: A Damage Growth Model," Composite Science and. Technology, 44, 169-177, 1992.
|
| 4. |
S. M. Spearing and P. W. R. Beaumont, "Fatigue Damage Mechanics of Composite Materials III: Prediction of Post-Fatigue Strength," Composite Science and. Technology, 44, 299-307, 1992 .
|
| 5. |
S. M. Spearing, P. W. R. Beaumont and P. A. Smith, "Fatigue Damage Mechanics of Composite Materials IV: Prediction of Residual Stiffness," Composite Science and. Technology, 44, 309-317,1992
|
|
|
|
| 6. |
P. W. R. Beaumont, S. M. Spearing, M. T. Kortschot and M. F. Ashby, "The Physical Modelling of Damage in Carbon Fibre Laminates," Advanced Composite Letters, 1, 19-22, 1992.
|
| 7. |
S. M. Spearing, P. W. R Beaumont and M. T. Kortschot, "The Fatigue Damage Mechanics of Notched Carbon Fiber/PEEK Laminates," Composites, 23 [5] 305-311, 1992.
|
|
8. |
J. Besson, M. De Graef, J. Lofvander and S. M. Spearing, "The Reinforcement of MoSi2 with Ellipsoidal Niobium Particles," J. Mat. Sci., 27, 4160-4166, 1992.
|
|
9. |
D. S. Beyerle, S. M. Spearing, F. W. Zok and A. G. Evans, "Damage and Failure in Unidirectional Ceramic-Matrix Composites," J. Am. Ceram. Soc., 75 [10], 2719-25, 1992.
|
|
10. |
S. M. Spearing and A G. Evans, "The Role of Bridging Fibers in the Delamination of Brittle Matrix Composites," Acta Metall. et Mater., 40 [9], 2191-99, 1992.
|
|
|
|
| 11. |
F. W. Zok and S. M. Spearing, "Matrix Crack Spacing in Brittle Matrix Composites," Acta Metall. et Mater., 40 [8], 2033-2043, 1992
|
| 12 |
F. E. Heredia, S. M. Spearing, A. G. Evans, P. Mosher and W. A. Curtin, "The Mechanical Properties of Continuous Fiber-Reinforced Carbon Matrix Composites and Relationships to Constituent Properties," J. Am. Ceram. Soc. 75 [11] 3017-25, 1992
|
| 13 |
D. Beyerle, M. Spearing and A. G. Evans, "Damage Mechanisms and the Mechanical Properties of a Laminated 0/90 Ceramic Matrix Composite," J. Am. Ceram. Soc, 72 [12] 3321-30, 1992.
|
| 14 |
S. M. Spearing and F. W. Zok, "Stochastic Aspects of Matrix Cracking in Brittle Matrix Composites," J. Eng. Mater. Tech, ASME Trans 115, 314-318, 1993.
|
| 15 |
H. E. Deve, S. M. Spearing and M.D. Maloney, "On the Fatigue Response of Bridging Ductile Fibers in an MoSi2 Intermetallic Composite," Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. A160 [2] 209-214 1993.
|
|
|
|
| 16 |
S. M. Spearing, F. W. Zok and A. G. Evans, "Stress Corrosion and Fatigue Cracking in a Unidirectional Ceramic Matrix Composite," J. Am .Ceram. Soc., 77 [2] 562-70 1994.
|
| 17 |
F. E. Heredia, S. M. Spearing, T. J. Mackin, M. Y. He, P. Mosher and P. Br¿nsted, "Notched Effects in Carbon Matrix Composites," J. Am. Ceram. Soc. 77 [11] 2234-45 1995.
|
| 18 |
T. Kuhn, H. Kessler, S. M. Spearing, R. Ballarini and A. H. Heuer, "Fracture Mechanisms of the Strombus Gigas Conch Shell: Implications for the Design of Brittle Laminates," J. Mat. Sci. 31, 6583-6594, 1996.
|
| 19 |
S. M. Spearing and K. S. Chen, "Micro Gas Turbine Engine Materials and Structures," Ceramic Engineering and Science Proceedings, 18 (4), 11-18, 1997. *
|
|
20 |
S. P. Shetty and S. M. Spearing, "Fracture Resistance of a Fiber Reinforced Film Adhesive," Scripta Materialia, 37 (6), 787-792, 1997. *
|
|
|
|
| 21 |
S. M. Spearing, "Design Diagrams for Reliable Layered Materials," AIAA Journal 35 (10), 1638-1644, 1997.
|
| 22 |
S. M. Spearing and P. W. R. Beaumont, "Towards a Predictive Design Methodology for the Fracture of Composite Materials," Applied Composite Materials 5 69-94, 1998.
|
| 23 |
S. M. Spearing, P. A. Lagace and H. L. N. McManus, "On the Role of Lengthscale in the Prediction of Failure of Composite Structures: Assessment and Needs," Applied Composites Materials 5 139-149, 1998.
|
| 24. |
S. M. Spearing, "Materials Issues in MEMS" Acta Materialia, 48, 179-196, 2000.
|
| 25 |
25. D. S. Walters and S. M. Spearing, "On the Flexural Creep of Single Crystal Silicon", Scripta Materialia 42, 769-774, 2000.
|
|
|
|
| 26 |
K-S. Chen, A. Ayon and S. M. Spearing, "Controlling and Testing the Fracture Strength of Silicon at the Mesoscale," J. Am. Ceram. Soc 83 [6] 1476-84, 2000.
|
| 27 |
S. M. Spearing, "Durability of Fiber Composites - the Case for Mechanism-Based Models," Composites Research and Technology , 22(4): 177-186, 2000.
|
| 28 |
28. K-S. Chen, S. M. Spearing and N. N. Nemeth, Structural Design of a Silicon Micro-Turbo Generator". AIAA Journal. 39(4) 720-728, 2001.
|
| 29. |
D. A. Burianek and S. M. Spearing "Delamination Growth from Facesheet Seams in Cross-Ply Titanium-Graphite Hybrid Laminates", Composites Science and Technology Composites Science and Technology 61 (2): 261-269, 2001.
|
| 30. |
30. J. M. Mirazo and S. M. Spearing, "Damage Modeling of Notched Graphite/Epoxy Sandwich Panels in Compression", Applied Composite Materials 8 (3): 191-216 2001.
|
|
|
|
| 31. |
31. M. G. Toribio and S. M. Spearing "Compressive Response of Notched Glass-Fiber/Honeycomb Sandwich Panels", Composites Pt A, 32 859-870 2001.
|
|
32. |
32. X. Zhang, K. -S. Chen, R. Ghodssi, A. A. Ay—n and S. M. Spearing, "Residual Stress and Fracture in Thick Tetraethylorthosilicate (TEOS) and Silane-Based PECVD Oxide Films," Sensors and Actuators A: Physical, 91, 379-386, 2001.
|
|
33. |
33. A. P. London, A. A. Ay—n, A. H. Epstein, S. M. Spearing, T. Harrison, Y. Peles and J. L. Kerrebrock "Microfabrication of a High Pressure Bipropellant Rocket Engine" Sensors and Actuators, Part A, Physical, 92, 351-357, 2001.
|
|
34. |
34. Y-H. Su, K-S. Chen, D. C. Roberts and S. M. Spearing "Large Deflection Analysis of a Pre-Stressed Annular Plate with a Rigid Boss under Axisymmetric Loading" Journal of Micromechanics and Microengineering 11, 645-653, 2001*.
|
|
35. |
S. S. Kessler, S. M. Spearing, M. J. Atalla, C. E. S. Cesnik and C. Soutis "Damage Detection in Composite Materials Using Frequency Response Methods", Accepted for publication in Composites Pt. B.
|
|
|
|
|
36. |
K-S. Chen, A. A. Ayon, X. Zhang, S. M. Spearing, "Effect of Process Parameters on the Surface Morphology and Mechanical Performance of Silicon Structures after Deep Reactive Ion Etching (DRIE)" Accepted for Publication J. Microelectromechanical Systems 2001.
|
|
37. |
D. A. Burianek and S. M. Spearing, " Fatigue Damage in Titanium-Graphite Hybrid Laminates" Accepted for Publication in Composite Science and Technology 2001.
|
|
38. |
D. A. Burianek, A. Giannokopoulos and S. M. Spearing, "Modeling of Facesheet Crack Growth in Titanium-Graphite Hybrid Laminates, Part I," Engineering Fracture Mechanics, 70, 775-798, 2001
|
|
39. |
D. A. Burianek, A. Giannokopoulos and S. M. Spearing, "Modeling of Facesheet Crack Growth in Titanium-Graphite Hybrid Laminates, Part II," Engineering Fracture Mechanics, 70, 799-812, 2001.
|
|
40. |
S.S. Kessler, S. M. Spearing, M.J. Atalla, C. E. S. Cesnik and C. Soutis "Damage Detection in Composite Materials Using Frequency Response Methods". Accepted for publication in Composites Pt B, 33, 87-95, 2002
|
|
|
|
|
41. |
Y-H.Su and S. M. Spearing "Buckling Response of a Press-Stressed Annular Plate with a Rigid Boss Under Axisymmetric Loading" Submitted to International Journal of Solids and Structures 2002.
|
|
42. |
S.S. Kessler and S. M. Spearing, "Damage Detection in Built-Up Composite Structures Using Lamb Wave Techniques". Submitted to Smart Materials and Structures, 2002.
|
|
43. |
S.S. Kessler and S. M. Spearing, "Structural Health Monitoring of Composite Materials Using Piezoelectric Sensors". Submitted to Smart Materials and Structures.
|
|
44. |
N. Miki, S. Zhang, R. Khanna, A. A. Ayon, D. Ward, and S. M. Spearing, "Multi-Stack Silicon-Direct Wafer Bonding for 3D MEMS Manufacturing". Submitted to Sensors and Actuators, Part A, Physical, 2002.
|
|
45. |
A.A. Ayon, X. Zhang, K. turner, D. Choi, B. Miller, S. F. Nagle, and S. M. Spearing, "Characterization of Low Temperature Silicon Wafer Bonding for Power MEMS Applications", submitted to Sensors and Actuators, Part A, Physical, 2002.
|
|
|
|
|
46. |
Z. Zhang, K-S. Chen and S. M. Spearing, "Thermal Mechanical Behavior of Thick PECVD Oxide Films for Power MEMS Applications", submitted to Sensors and Actuators, Part A, Physical, 2002.
|
|
47. |
C. H. Tsau, S. M. Spearing, M. A. Schmidt "Fabrication of Wafer-Level Thermocompression Bonding". Submitted to J. MEMS, 2002.
|
|
48. |
D. C. Roberts, H-Q. Li, J. L. Steyn, O. Yaglioglu, S.M. Spearing, M. A. Schmidt and N.W. Hagood, "A Piezoelectric Microvalve for Compact High Frequency High Differential Pressure Micropumping Systems". Submitted to J. MEMS, 2002.
|
|
49. |
V.T. Srikar and S. M. Spearing. "Mechanical Test Methods for MEMS Devices" Submitted to Experimental Mechanics 2002
|
|
50. |
V.T. Srikar and S.
M. Spearing. "Materials Selection in Micromechanical Design:
An Application of the Ashby Approach: submitted to J. MEMS, 2002 |
| 1. |
M. K. Bannister, S. M. Spearing, J. P. A. Lofvander and M. De Graef, "Fatigue of Extruded Steel/NiAl Composites," Mat. Res. Soc. Symp. Proc. 273 1992
|
| 2 |
S. M. Spearing M. A. Tenhover, D. B. Lukco, L. Viswanathan and D. K. Hollen, "Models for the Thermomechanical Behavior of Metal/Ceramic Laminates," Electronic Packaging Materials Science VII, Mat. Res. Soc. Symp. Proc. 323, 125-130, 1994.
|
| 3 |
S. M. Spearing, "Design Diagrams for Reliable Layered Materials," AIAA paper 96-1476, Presented at AIAA SDM meeting Salt Lake City, April 1996.
|
| 4 |
P. A. Lagace, S. M. Spearing and H. L. N. McManus, "A Proposed Design Methodology for the Failure and Durability of Composite Structures," presented at 11th DoD/NASA/FAA Conference on Fibrous Composites in Structural Design, Fort Worth, TX, Aug 1996.
|
| 5. |
S. M. Spearing and K. S. Chen, "Micro Gas Turbine Engine Materials and Structures," American Ceramic Society Structural Ceramics Meeting, Cocoa Beach, Jan 1997.
|
|
|
|
| 6. |
S. P. Shetty and S. M. Spearing, "The Reliability of Composite-Metal Adhesive Joints Subject to Thermo-Mechanical Loading," AIAA paper 97-1222, Presented at AIAA SDM meeting Orlando, April 1997.
|
| 7. |
S. M. Spearing and K-S. Chen, "Power MEMS Materials and Structures," in Tribology Issues and Opportunities in MEMS, Ed. B. Bhusan, Kluwer, Amsterdam, 1998 pp 95-107.
|
| 8. |
D. A. Burianek and S. M. Spearing, "Durability of Titanium/Graphite Hybrid Laminates," AIAA paper 98-1959, Presented at AIAA SDM meeting, Long Beach, April 1998.
|
| 9. |
S. M. Spearing, "Fatigue of Fiber Composites - the Case for Mechanism-Based Models," AIAA paper 98-1736, Presented at AIAA SDM meeting, Long Beach, April 1998.
|
|
10. |
K-S. Chen and S. M. Spearing "Mesoscale Strength Testing of Silicon," Mat. Res. Soc. Symp. Proc. 411 1998.
|
|
|
|
| 11 |
K-S. Chen, A. A. Ayon, K. A. Lohner, M. A. Kepets, T. K. Melconian and S. M. Spearing, "Dependence of Silicon Fracture Strength and Surface Morphology on Deep Reactive Ion Etching Parameters", Mat. Res. Soc. Symp. Proc. 546, 21-26, 1999.
|
| 12 |
K. A. Lohner, K-S. Chen, A. A. Ayon and S. M. Spearing "Microfabricated Silicon Carbide Microengine Structures," Mat. Res. Soc. Symp. Proc. 546, 85-90, 1999.
|
| 13. |
A. A. Ayon, M. A. Schmidt, K. A. Lohner, K-S. Chen, S. M. Spearing and H. Sawin "Deep Reactive Ion Etching of Silicon", Mat. Res. Soc. Symp. Proc 546, 51-61, 1999.*
|
| 14. |
S. M. Spearing, K-S. Chen and N. Nemeth, "Structural Design of a Silicon Micro Turbogenerator", AIAA paper 99-1332, Presented at AIAA SDM meeting, St. Louis, April 1999.
|
| 15. |
S. M. Spearing, M. G. Toribio and J. M. Mirazo, "On the Compressive Response of Notched Composite-Honeycomb Sandwich Panels AIAA paper 99-1415, Presented at AIAA SDM meeting, St. Louis, April 1999.
|
|
|
|
| 16. |
M. G. Toribio, J. M. Mirazo and S. M. Spearing, "Compressive Failure of Notched Composite-Honeycomb Sandwich Panels", Proc. 12th International Conference on Composite Materials, Paris, July 1999.
|
| 17. |
D. A. Burianek and S. M. Spearing, "Durability of Hybrid Laminates" Proceedings of the Fourth International Conference on Durability Analysis of Composite Systems Ð DURACOSYS 99/Brussels/Belgium/11-14 July 1999 Edited by A. H. Cardon, H. Fukuda, K. L. Reifsnider and Georges Verchery, A.A. Balkema, Rotterdam 2000, 465-471.
|
| 18. |
D. A. Burianek and S. M. Spearing, "Delamination Growth from Facesheet Seams in Titanium-Graphite Hybrid Laminates" American Society for Composites 14th Annual Meeting, Dayton, Sept. 1999.
|
| 19. |
C. H. Tsau, M. A. Schmidt and S. M. Spearing, "Low Temperature Wafer-Level, Gold-Gold Thermocompression Bond Characterization" Mat. Res. Soc. Symp. Proc 605, 171-176, 2000.*
|
| 20. |
20. S. N. Jenkins and S. M. Spearing, "Investigation of curved composite panels under high-g loading" AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, 41st, Atlanta, GA, Apr. 3-6, 2000, AIAA Paper 2000-1532*
|
|
|
|
| 21. |
C. L. Sanders, S. M. Spearing, M. C. Shaw, "The reliability of adhesive joints under piezomechanical loading," AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, 41st, Atlanta, GA, Apr. 3-6, 2000, AIAA Paper 2000-1535*
|
| 22. |
`H-Q. Li, D.C. Roberts, J. L. Steyn, K. Turner, J. A. Carretero, O. Yaglioglu, Y-H. Su, L. Saggere, N. W. Hagood. S. M. Spearing, M. A. Schmidt, R. Micak, K. S. Breuer, "A high frequency high flow rate piezoelectrically driven MEMS micropump", Technical Digest, Solid-State Sensor and Actuator Workshop Tranducers Res. Found, Cleveland, OH. USA, 2000. 69-72
|
| 23. |
T. S. Harrison, A. P. London, S. M. Spearing, "High Temperature, High Pressure Fluid Connections for Power Micro-Systems" Mat. Res. Soc. Symp. Proc. 654, Paper EE6.5, 2001*
|
| 24. |
K. T. Turner, A. A. Ayon, D. Choi, B. Miller and S. M. Spearing "Characterization of Silicon Fusion Bonds Using a Four-Point Bend Specimen" Mat. Res. Soc. Symp. Proc. 657, Paper EE6.3, 2001*
|
| 25. |
K-S. Chen, X. Zhang, and S. M. Spearing, "Processing of Thick Dielectric Films for Power MEMS: Stress and Fracture", to appear in Mat. Res. Soc. Symp. Proc. 657, Paper EE8.4, 2001
|
| 26. |
S. S. Kessler, S. M. Spearing,M. J. Atalla, C. E. S. Cesnik, and C. Soutis "Structural health monitoring in composite materials using frequency response methods" Nondestructive evaluation of materials and composites V; Proceedings of the Conference, Newport Beach, CA, March 7-8, 2001, (A01-42976 11-38), Bellingham, WA, SPIE, 2001, p. 1-11
|
|
|
|
| 27. |
C. Soutis and S. M. Spearing, "Predicting the compressive strength of monolithic and sandwich composite structures failing by fibre microbuckling" AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, 42nd, Seattle, WA, Apr. 16-19, 2001
|
| 28. |
D. A. Burianek and S.M. Spearing, "Interacting Damage Modes in Titanium-Graphite Hybrid Laminates," Proc. ICCM13,Beijing, China, June 2001
|
| 29. |
L. Saggere, N. W. Hagood, D. C. Roberts; H-Q. Li; J. L. Steyn; K. Turner, J.A. Carretero, O. Yaglioglu, Y-H. Su, R. Mlcak, S. M. Spearing, K. S. Beuer, M. A. Schmidt, "Design, fabrication , and testing of a piezoelectrically driven high flow rate micro-pump, Proceedings of the 2000 12th IEEE International Symposium on Applications of Ferroelectrics IEEE, Piscataway, NJ, USA; p. 297--300 vol. 1, 2001
|
| 30. |
D. A. Burianek and S. M. Spearing, "Modeling Facesheet Crack Growth in Titanium-Graphite Hybrid Laminates," Paper 122, Proceedings of the 16th meeting of the American Society for Composites, Blacksburg Virginia September 2001
|
|
|
|
| 31. |
B. Huppe and S. M. Spearing, "High Reliability Joining of Metal and Composite Components", Paper 123, Proceedings of the 16th meeting of the American Society for Composites, Blacksburg Virginia September 2001.
|
| 32. |
S.S. Kessler, S. M. Spearing and C. Soutis "Structural Health Monitoring in Composite Materials Using Lamb Wave Methods" Paper 043, Proceedings of the 16th Meeting of the American Society for Composites, Blacksburg Virginia September 2001.
|
| 33. |
S. S. Kessler, S. M. Spearing and C. Soutis, "Optimization of Lamb Wave Methods for Damage Detection in Composite Materials" AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, 43rd
|
| 34. |
S. S. Kessler, S. M. Spearing, M. J. Atalla, C. E. S. Cesnik and C. Soutis, "Structural Health Monitoring In Composite Materials Using Frequency Response Methods". Nondestructive evaluation of materials and composites VI: Proceedings of the Conference, Newport Beach, CA, March 7-8, 2, (A01-42976 11-38), Bellingham, WA, SPIE, 2001, p. 1-11
|
| 35. |
S. S. Kessler and S. M. Spearing, "Design of a Piezoelectric-based Structural Health Monitoring System for Damage Detection in Composite Materials" Nondestructive Evaluation of Materials and Composites VI: Proceedings of the Conference, Newport Beach, CA, March 7-8, 2, (A01-42976 11-38), Bellingham, WA, SPIE, 2001, p. 1-11
|
|
|
|
| 36. |
N. Miki, X. Zhang, R. Khanna, A. A. Ayon, D. Ward and S. M. Spearing "A study of Mulit-Stack Silicaon-Direct Wafer Bonding for MEMS Manufacturing", Proceeding fothe 15th IEEE International Conference on Micro Electro Mechanical Systems, Las Vegas, Nevada, USA, January 20-24, 2002, pp. 411-414.
|
| 37. |
A. A. Ayon, X. Zhang, K. Turner, D. Choi, B. Miller, S. F. Nagle, and S. M. Spearing, "Low Temperature Silicon Wafer Bonding for MEMS Applications," Proceedings of the 15th IEEE International Conference on Micro Electro Mechanical Systems, Las Vegas, Nevada, USA, January 20-24, 2002, pp. 411-414.
|
| 38. |
Soutis, C. and Spearing, S.M. "Compressive Behaviour of Woven Fabric Face-Sheet Honeycomb Sandwich Panels". 9th International Conference on Fibre Reinforced Composites (FRC 2002), 26-28 March 2002, Newcastle, U.K. pp. 233-240, ISBN 0-9540459-2-0. 2002
|
|
39. |
S. S. Kessler and S. M. Spearing, "In-situ Sensor-based Damage Detection of Composite Materials for Structural Health Monitoring" AIAA Paper, AIAA-2002-1545, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, 43rd.
|
| 40. |
S. S. Kessler, S. M. Spearing and M. J. Atalla, "In-situ Damage Detection of Composite Structures using Lamb Wave Methods" EWSH-2002
|
|
|
|
|
Other Major Publications
|
|
| 1. | A. de Rouvray, E. Haug, P. Dowlatyari, P. W. Beaumont and M. Spearing, Advanced Structural Materials, "Advanced Model Development and Validation for Composite Damage Mechanics" ESA Workshop on Advanced Structural Materials: Design for Space Applications, Nordwijk, The Netherlands, Mar. 1988, ESA WPP-044.
|
| 2. | S. M. Spearing, "Conference Report: ASTM 4th Symposium on Composite Materials: Fracture and Fatigue" Composites 22: (5) 400-402, 1991.
|
| 3. | S. M. Spearing and P. W. R. Beaumont, "Damage Mechanics of Composite Materials," 8th European Conference on Fracture, 1990.
|
| 4. | P. W. R. Beaumont, S. M. Spearing and M. T. Kortschot, "Development of Fatigue Damage Mechanics for Application to the Design of Damage-Tolerant Composite Components," ASME Conference on Composite Materials Technology, Houston, Jan. 1991.
|
| 5. | P. W. R. Beaumont and S. M. Spearing, "Damage Mechanics of Static and Cyclic Failure of Carbon Fibre-Polymer Composites," 1st International Conference on Deformation and Fracture of Composites, Manchester, UK, March 1991.
|
|
|
|
| 6. |
P. W. R. Beaumont and S. M. Spearing, "Development of Fatigue Damage Mechanics for Application to the Design of Damage Tolerant Composite Components," Proc. Internat. Conf: Spacecraft Structures and Mechanical Testing, Noordwijk, The Netherlands, April 1991, ESA SP-321 Oct. 1991.
|
| 7. | P. W. R. Beaumont, S. M. Spearing and M. T. Kortschot, "The Mechanics of Fatigue Damage in Structural Composite Materials," ICCM VIII, Honolulu, July 1991.
|
| 8. | S. M. Spearing, M. T. Kortschot, and P. W. R. Beaumont, " The physical modelling of damage in carbon fibre laminates" Proc. Second International Symposium on Composite Materials and Structures, Beijing, China, 3-7 Aug. 1992 Peking University Press pp. 277-283, 1992.
|
| 9. | S. M. Spearing, P. A. Lagace and H. L. N. McManus, "On the Role of Lengthscale in the Prediction of Failure of Composite Structures: Assessment and Needs," 10th International Conference on Composite Materials, Whistler, BC, Canada, IV-49 1995.
|
| 10. |
A. H. Epstein, S. D. Senturia, G. Anathasuresh, A. Ayon, K. Breuer, K-S. Chen, F. E. Ehrich, G. Gauba, R. Ghodssi, C. Groshenry, S. Jacobson, J. H. Lang, C-C. Lin, A. Mehra, J. M. Miranda, S. Nagle, D. J. Orr, E. Piekos, M. A. Schmidt, G. Shirley, S. M. Spearing, C. S. Tan, Y-S. Tzeng, I. A. Waitz, "Power MEMS and Microengines," Presented at IEEE Transducers '97 Conference, Chicago, IL, June 1997.
|
|
|
|
| 11. | A. H. Epstein, S. D. Senturia, O. Al-Midani, G. Anathasuresh, A. Ayon, K. Breuer, K-S. Chen, F. E. Ehrich, E. Esteve, L. Frechette, G. Gauba, R. Ghodssi, C. Groshenry, S. Jacobson, J. L. Kerrebrock, J. H. Lang, C-C. Lin, A. London, J. Lopata, A. Mehra, J. O. Mur Miranda, S. Nagle, D. J. Orr, E. Piekos, M. A. Schmidt, G. Shirley, S. M. Spearing, C. S. Tan, Y-S. Tzeng, I. A. Waitz, "Micro-Heat Engines, Gas Turbines, and Rocket Engines - the MIT Microengine Project," AIAA Paper AIAA-97-1773, Presented at 28th AIAA Fluid Dynamics Conference/4th AIAA Shear Flow Control Conference, Snowmass Village, CO, June 29 -July 2 1997.
|
| 12. |
S. P. Shetty and S. M. Spearing, "The Fracture of Composite-Metal Adhesive Joints Under Thermo-Mechanical Loading," Proceedings 11th International Conference on Composite Materials, Gold Coast, Qld, Australia, 1997.
|
| 13. | D. A. Burianek and S. M. Spearing "Fatigue Induced Delamination in Titanium-Graphite Hybrid Laminates," American Society for Composites, 13th Technical Conference, Baltimore, MD, Sept. 1998.
|
| 14. | D. A. Burianek and S. M. Spearing "Durability of Titanium/Graphite Hybrid Laminates," 8th Joint US-Japan Conference on Composites, Baltimore, MD, Sept. 1998.
|
| 15. | A. K. Noor, S. M. Spearing, S. L. Venneri and W. W. Adams, "Frontiers of the Material World," Aerospace America, April 1998.
|
|
|
|
| 16. | Beaumont, P. W. R., Spearing, S.M. Predictive design and modelling failure problems in fibre composites proceedings ECCM-8 - European Conference on Composite Materials: Science, Technologies and Applications, Naples, Italy, June 3-6, 1998. Vol. 4, 1998, p. 557-564.
|
| 17. | N. W. Hagood IV, L. Saggere, M. A. Schmidt, S. M. Spearing, K. S. Breuer, R. Mlcak, J. A. Carretero,Farid Ganji, Hanqing Li, Kuo-Shen Chen, Yu-Hsuan Su, and Seward Pulitzer, "Development of Micro-Hydraulic Transducer Technology", Proceedings of ICAST '99. Paris, France, Oct. 11-13 1999.
|
| 18. | N. W. Hagood, D. C. Roberts, L., Saggere, K. S. Breuer, K-S. Chen, J. A. Carretero, H. Li, R. Mlcak, S. Pulitzer, M. A. Schmidt, S. M. Spearing, Y-H. Su, "Micro-Hydraulic Transducer Technology for Actuation and Power Generation", Proceedings SPIE 7th International Symposium on Smart Structures and Materials, Newport Beach, CA, March 5-9, 2000.
|
| 19. | X. Zhang, R. Ghodssi, K-S Chen, A. A. Ayon and S. M. Spearing, "Residual Stress Characterization of Thick PECVD TEOS Films for Power MEMS Applications, Transducers 2000, Hilton Head, SC.
|
| 20. | H.Q. Li, D.C. Roberts, J.L. Steyn, K.T. Turner, J. A. Carretero, O. Yaglioglu, R. Mlcak Y.-H. Su, L. Saggere, N.W. Hagood, S.M. Spearing, K.S. Breuer, and M.A. Schmidt, "MEMS Micropump Driven by Piezoelectric Material", presented at 2000 Solid-State Sensor and Actuator Workshop, June 4 - 8, 2000 Hilton Head Island, South Carolina.
|
|
|
|
| 21. | S. S. Kessler and S. M. Spearing, "Design, Analysis and Testing of a High-g, Composite Fuselage Structure" Proceedings, American Society of Composites, College Station TX, September 2000.
|
| 22. | D. A. Burianek and S. M. Spearing, "Damage Modeling in Titanium-Graphite Hybrid Laminates" Proceedings, American Society of Composites, College Station TX, September 2000.
|
| 23. | S. S. Kessler, S. M, Spearing, S Mark, G. A. Kirkos "A Design of a high-g unmanned aerial vehicle structure" 2000 World Aviation Conference, San Diego, CA, Oct. 10-12, 2000.
|
| 24. | S. M. Spearing and P. A. Lagace, "Encyclopaedia of Materials Science and Engineering Technology (Elsevier), Section 3.7.26 "Designing with Composites", Published 2001.
|
| 25. | S.M. Spearing "Encyclopaedia of Materials Science and Engineering Technology (Elsevier), Section 4.7.4 "Materials for Micro-Devices: Silicon and Ceramics" Published 2001.
|
| 26. | J.L. Steyn, Q. Li, D.C. Roberts, K. T. Turner, O. Yaglioglu, Y-H. Su, M. A. Schmidt, S. M. Spearing, N.W. Hagood and R. Mlcak, "Hydraulic Amplification Devices for Microscale Actuation", presented at 2002 Solid-State Sensor and Actuator Workshop, June 4-8, 2002 Hilton Head Island, South Carolina.
|
| Top Of Page | |