Faculty
Dr.
Jung-Hoon Chun
|
77 Massachusetts Avenue 35-233 Cambridge, MA 02139 (617)253-1759 jchun@mit.edu |
| Dr.
Nannaji Saka
Prinicpal Research Scientist Department of Mechanical Engineering |
77 Massachusetts Avenue 35-329 Cambridge, MA 02139 (617) 253-2227 nsaka@mit.edu |
Graduate Students
| Hady Joumaa M.S. Candidate, Mechanical Engineering |
77 Massachusetts Avenue 35-332
Cambridge, MA 02139 (617) 253-2108 hkj02@mit.edu |
| Wayne
Hsiao
PhD Candidate, Mechanical Engineering |
77 Massachusetts Avenue 35-332
Cambridge, MA 02139 (617) 253-2108 hsiao@mit.edu |
Undergraduate Students
| David
Poblano
S.B. Candidate, Mechanical Engineering |
77 Massachusetts Avenue 35-333
Cambridge, MA 02139 poblano@mit.edu |
Office Assistant
Catherine Nichols |
77 Massachusetts Avenue 35-231
|
DBM Alumnae/i
| Last updated 1/27/2000 | |||
| Christian H. Passow | M.S. | 1992 | A study of spray forming using uniform droplet sprays |
| Honor J. Passow | M.S. | 1993 | The effect of imposed vibrations on the flow rate of highly-concentrated, shear-thinning slurries |
| Godard Abel | M.S. | 1994 | Characterization of Droplet Flight Path and Mass Flux in Droplet-Based Manufacturing |
| Sucharita Sahu | M.S. | 1994 | Thermal state of Sn-Pb droplets in the droplet-based manufacturing process |
| Paul J. Aquaviva | M.S. | 1995 | Modeling of Deposit Solidification in Droplet Based Manufacturing |
| Chen-An Chen | Ph.D | 1996 | Droplet Solidification and its Effects on Deposit Microstructure in the Uniform Droplet Spray Process |
| Pyongwon Yim | Ph.D | 1996 | The Role of Surface Oxidation in the Break-Up of Laminar Liquid Metal Jets |
| Wesley H Williams | S.B. | 1996 | Production of Uniform Bronze Powders by the Uniform Droplet Spray Process |
| Jiun-Yu Lai | M.S. | 1997 | A Study of the Fabrication of Thin Lamination Stator Cores by the Uniform Droplet Spray Process |
| Sukyoung Chey | Ph.D | 1998 | A Study of Surface Porosity Formation in Deposits Sprayed onto Flat Substrates by the Uniform Droplet Spray Process |
| Jennifer Shin | S.B. | 1998 | Rapid Prototyping using the Uniform Droplet Spray Process |
| Ho-Young Kim | Ph.D | 1999 | Spreading Behavior of Molten Metal Microdroplets |
| Juan-Carlos Rocha | M.E. | 1999 | Control of the UDS Process for the Production of Solder Balls for BGA Electronics Packaging |
| Tasos Karahalios | S.B. | 1999 | Sensor Investigation of Microdroplet Spreading Behavior |
| Paul Chai | S.B. | 1999 | Study of the Temperature Microsensors for Possible Applications in the UDS Process |
| Jason Barnwell | S.B. | 2000 | Evalaution of Exisiting Mass Distribution Model For Multi-Orifice Flows |
| Hattie Gruniesen | S.B. | 2001 | Design and Testing of a Mechanical Filter for Sphericity Control of Metal Balls |
Jean-Pei Jeanie Cherng |
Ph.D | 2002 | The effects of deposit thermal history on microstructure produced by uniform droplet spray forming |
| Wayne Hsiao | Ph.D | 2003 | Effects of Surface Properties on Solder Bump Formation by Direct Droplet Deposistion |