References

Building Energy & Technology Research Groups

Engineering Design and Consulting Firms

Abushakra, B., Haberl, J., and D. Claridge. 2004. Overview of literature on diversity factors and schedules for energy and cooling load calculations (1093-RP). ASHRAE Transactions 110(1):164-176.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2004.  Thermal Environmental Conditions for Human Occupancy.  ANSI/ASHRAE Standard 55-2004. American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2004.  Ventilation for Acceptable Indoor Air Quality.  ANSI/ASHRAE Standard 62.1-2004. American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2004.  Energy Standard for Buildings Except Low-Rise Residential Buildings.  ANSI/ASHRAE/IESNA Standard 90.1-2004. American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2005.  2005 ASHRAE Handbook - Fundamentals, Chapter 7: Sound and Vibration.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2004.  Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs.  ANSI/ASHRAE Standard 140-2004.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  1988.  Practices for Measurement, Testing, Adjusting and Balancing of Building Heating, Ventilation, Air-Conditioning and Refrigeration Systems.  ANSI/ASHRAE Standard 111-1988.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2005.  The Commissioning Process.  ANSI/ASHRAE Guideline 0-2005.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  1996.  The HVAC Commissioning Process.  ANSI/ASHRAE Guideline 1-1996.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  1993.  Preparation of Operating and Maintenance Documentation for Building Systems.  ANSI/ASHRAE Guideline 4-1993.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2002.   For Measurement of Energy and Demand Savings.  ASHRAE Guideline 14-2002.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society of Plumbing Engineers, "Data Book"- latest edition

Beasley, R., Haberl, J., Turner, D. and D. Claridge. 2002. Development of a methodology for baselining the energy use of large multi-building central plants. ASHRAE Transactions 108(1)251-259.

Gillespie, K.L., Haves, P., Hitchcock, R.J., Deringer, J.J., and K. Kinney. 2007. A specifications guide for performance monitoring systems. Spec Guide Version 1. Lawrence Berkeley National Laboratory, Berkeley, CA, 124 pp. (March).

Claridge, D., Abushakra, B., and J. Haberl. 2003. Electricity diversity profiles for energy simulation of office buildings (1093-RP). ASHRAE Transactions 110(1):365-377.

Elleson, J., Haberl, J., and T. Reddy. 2002. Field monitoring and data validation for evaluating the performance of cool storage systems. ASHRAE Transactions 108(1):1072-1084.

Glazer, J. 2006. Tasks 6, Draft final report: ASHRAE 1286-TRP, Evaluation of building energy performance rating protocols.  GARD Analytics, Park Ridge, IL (September).

Haberl, J., Lopez, R., and R. Sparks. 1992. LoanSTAR Monitoring and Analysis Program: Building Energy Monitoring Workbook. Energy Systems Laboratory Technical Report. ESL-TR-92/06-02, Texas A&M University, College Station, TX, 198 pages.

Haberl, J., Reddy, T., Claridge, D., Turner, D., O’Neal, D., and W. Heffington. 1996. Measuring energy-savings retrofits: Experiences from the Texas LoanSTAR Program. ORNL Report ORNL/Sub/93-SP090/1. Oak Ridge National Laboratory, Oak Ridge, TN, 192 pages.

Haberl, J., Claridge, D., and K. Kissock. 2003. Inverse model toolkit (1050RP): application and testing. ASHRAE Transactions 109(2):435-448.

Haberl, J., Thamilseran, S., Reddy, T., Claridge, D., O’Neal, D., and D. Turner. 1998. Baseline calculations for measuring and verification of energy and demand savings in a revolving loan program in Texas. ASHRAE Transactions 104(2):841-858.

Haberl, J., Sreshthatputra, A., Claridge, D., and D. Turner. 2001. Measured energy indices for 27 office buildings. Proceedings of the 1st International Conference for Enhanced Building Operation, Austin, Texas, pp. 185-200.

Haberl, J. and S. Cho. 2004. Literature Review of Uncertainty of Analysis Methods: Inverse Model Toolkit. Energy Systems Laboratory Report ESL-TR-04/10-03, Texas A&M University, College Station, TX (October).

Haberl, J. and S. Cho. 2004. Literature Review of Uncertainty of Analysis Methods: DOE-2 Program. Energy Systems Laboratory Report ESL-TR- 04/11-01.  Texas A&M University, College Station, TX (November).

Haberl, J. and T. Bou-Saada. 1998. Procedures for calibrating hourly simulation models to measured building energy and environmental data. ASME Journal of Solar Energy Engineering 120:193-204 (August).

Illuminating Engineering Society of North America. 2003. Lighting Handbook, 9th Edition.  Illuminating Engineering Society of North America, New York, N.Y.

United States Department of Energy. 1997. International performance measurement and verification protocol. DOE/EE-0157. United States Department of Energy, Washington D.C. (December).

United States Department of Energy. 2001. International performance measurement and verification protocol, vol. I, Concepts and options for determining energy and water savings. DOE/GO-102001-1187. United States Department of Energy, Washington D.C. (January).

United States Department of Energy. 2003. International performance measurement and verification protocol: vol. II: Concepts and practices for improved indoor environmental quality. DOE/GO-102001-1188. United States Department of Energy, Washington D.C. (January).

IPMVP.  2003. International performance measurement and verification protocol, vol. III - Concepts and options for determining energy savings in new construction.  IPMVP, Inc.  Available through http://www.evo-world.org.

IPMVP. 2003. International performance measurement and verification protocol, vol. III - Concepts and practices for determining energy savings in renewable energy Technologies applications. IPMVP, Inc.  Available through http://www.evo-world.org.

Kissock, K., Haberl, J., and D. Claridge. 2003. Inverse model toolkit (1050RP): Numerical algorithms for best-fit variable-base degree-day and change-point models. ASHRAE Transactions 109(2):425-434.

Landman, D. and J. Haberl. 1998. Development of pre-screening methods for analyzing energy use in K-12 public schools. Proceedings of the Eleventh Symposium on Improving Building Systems in Hot and Humid Climates, Texas Building Energy Institute, Ft. Worth, Texas, pp.220-231 (June).

United States Department of Energy. 1996. North american energy measurement and verification protocol. DOE/EE-0081. United States Department of Energy, Washtingon D.C.  (March).

Torcellini, P., Pless, S., Deru, M., Griffith, B., Long, N., and R. Judkoff. 2006. Lessons learned from case studies of six high performance buildings.  NREL/TP-550-37542. National Renewable Energy Laboratory, Golden, CO (June).

Reddy, T., Haberl, J., Saman, N., Turner, W., Claridge, D., and A. Chalifoux. 1997 Baselining methodology for facility-level monthly energy use - part 2: Application to eight army installations. ASHRAE Transactions 103(2):348-359.

Reddy, T., Haberl, J., Saman, N., Turner, W., Claridge, D., and A. Chalifoux. 1997. Baselining methodology for facility-level monthly energy use - part 1: Theoretical aspects. ASHRAE Transactions 103(2):336-347.

Reddy, T., Haberl, J., and J. Elleson. 1999. Engineering uncertainty analysis in the evaluation of energy and cost savings of cooling system alternatives based upon field monitored data. ASHRAE Transactions 105(2):1047-1057.

Reddy, T., Elleson, J., and J. Haberl. 2002. Methodology development for determining long-term performance of cool storage systems from short term tests. ASHRAE Transactions 108(1):1085-1103.

Sylvester, K., Song, S., Haberl, J., and D. Turner. 2002. Sustainability assessment of the Robert E. Johnson State Office Building. Submitted to the Texas State Energy Conservation Office, Energy Systems Laboratory Report ESL-TR-02/01-02. Texas A&M University, College Station, TX, 139 pp. (April).

U.S. Green Building Council.  2005. LEED NC: Green Building Rating System for New Construction and Major Renovations, Version 2.2.  U.S. Green Building Council, Washington D.C. (October).

U.S. Environmental Protection Agency. 2007. Target Finder. http://www.energystar.gov/index.cfm?c=new_bldg_design.bus_target_finder (accessed April 1, 2007).

U.S. Environmental Protection Agency. 2007. Portfolio Manager Overview.  http://www.energystar.gov/index.cfm?c=evaluate_performance.bus_portfoliomanager (accessed April 1, 2007)

Haberl, J., Powell, T., Carlson, K., Im, P., and D. Turner. 2003. U.S. Army measurement and verification (M&V) costing toolkit: DACA42-01-T-0119. Energy Systems Laboratory Report ESL-TR-03/12-01.  Texas A&M University, College Station, TX, 63 pp. with CDROM (December).

Acoustical Society of America. 2002. American National Standard Acoustical Performance Criteria, Design Requirements, and Guidelines for Schools. ANSI/ASA Standard S12.60-2002 Acoustical Society of America, Melville, NY.

California Energy Commission. 2005. 2005 Building Energy Efficiency Standards for Residential and Nonresidential Buildings. California Energy Commission, Sacramento, CA.

Boerstra, A. 2006. The adaptive thermal comfort criteria in the new EPBD IEQ standard. Proceedings of conference: Comfort and Energy Use in Buildings - Getting them Right, Cumberland Lodge, Windsor, UK, 27-30th April 2006. London: Network for Comfort and Energy Use in Buildings.

Erhorn, H., and  A. Balada. 2006. Essay on DIN V 18599: Energy efficiency of buildings:  Calculation of the net, final, and primary energy demand for heating, cooling, ventilation, domestic hot water, and lighting.  Includes spreadsheet tool.  Deutsches Institut für Normung, Berlin, Germany.

European Commission. 2005. Energy Certification of Berlaymont. European Commission, Brussels, Belgium.

Benke, G. European Green Building Programme: Benchmarking. European Commission Green Building Programme, Brussels, Belgium.

European Commission. 2004. The European Green Building Programme:  Guidelines for Energy Management, Version 1.0. European Commission Green Building Programme, Brussels, Belgium (December).

Adnot, J., Dupont, M., and B. Daniela. The European Green Building Programme:  A Benchmarking Guide Adapted to Air Conditioning Based on Electricity Bills. European Commission Green Building Programme, Brussels, Belgium.

Adnot, J. and M. Dupont. The European Green Building Programme:  Air-Conditioning Tehcnical Module. European Commission Green Building Programme, Brussels, Belgium.

Pagliano, L. and A. Dama. The European Green Building Programme: Building Envelope Technical Module. European Commission Green Building Programme, Brussels, Belgium.

European Commission.  2005. The European Green Building Programme:  Energy Audit Guidelines, Version 1. European Commission Green Building Programme, Brussels, Belgium (September).

Paar, A., Kallmann, K., and G. Benke. The European Green Building Programme:  Technical Module on Heating. European Commission Green Building Programme, Brussels, Belgium.

Paulssen, K., and L. Hermann. The European Green Building Programme:  Technical Module on Lighting. European Commission Green Building Programme, Brussels, Belgium.

Kallmann, Kerstin. The European Green Building Programme:  Technical Module on Office Equipment. European Commission Green Building Programme, Brussels, Belgium.

U.S. Department of Energy. 2000. Federal Energy Management Program:  M&V Guidelines:  Measurement and Verification for Federal Energy Projects, Version 2.2.  DOE/GO-102000-0960.  U.S. Department of Energy Office of Energy Efficiency and Renewable Energy.

Green Building Alliance. 2006. High performance building data protocol & repository: Preliminary report & scoping proposal. Green Building Alliance, Pittsburgh, PA, 60 pp. (December).

Levin, H., Hodgson, A.T.  2006. VOC Concentrations of Interest in North American Offices and Homes. Building Ecology (August).  http://www.buildingecology.com/free_article_detail.php?id=13&title=VOC_Concentrations_of_Interest_in_North_American_Offices_and_Homes

Lyberg, M. 1987. Source Book for Energy Auditors, Vol. 1. International Energy Agency, Stockholm, Sweden (Report on IEA Task XI).

Lyberg, M. 1987. Source Book for Energy Auditors, Vol. 2. International Energy Agency, Stockholm, Sweden (Report on IEA Task XI).

Warren, P. 2003. Integral Building Envelope Performance Assessment. International Energy Agency, Stockholm, Sweden (Technical Synthesis Report on IEA Annex 32).

International Code Council. 2003. 2003 International Energy Conservation Code.  International Code Council, Washington, D.C.

Seem, J.E. 2007. Using intelligent data analysis to detect abnormal energy consumption in buildings. Energy and Buildings, Vol. 39, pp.52-58.

Hui, P.S., Wong, L.T., and K.W. Mui. 2007. Evaluation of professional choice sampling locations for indoor air quality assessment. Building and Environment, Vol. 42, pp. 2900-2907.

Gillespie, K.L., Haves, P., Hitchcock, R.J., Deringer, J., and K. Kinney. 2006. A guide for specifying performance monitoring systems in commercial and institutional buildings. Proceedings of National Conference on Building Commissioning.

Verein Deutscher Ingenieure. 2006. Matrix of Existing Guidelines. Verein Deutscher Ingenieure, Dusseldorf, Germany.

Olesen, B.W. 2007. The philosophy behind EN15251:  Indoor environmental criteria for design and calculation of energy performance of buildings. Energy and Buildings, vol. 39, pp. 740-749.

European Committee for Standardization. 2006. Umbrella document, Version 7. prCEN/TR Draft Standard 15615. CEN/BT/TF 173 N 68 rev. Netherlands Normalisatie-instituut (August).

Persily, A.K. 1997. Evaluating Building IAQ and Ventilation with Indoor Carbon Dioxide. ASHRAE Transactions, V.103, Pt.2.

Bordass, B., Field, J., Jones, P., and R. Bunn. 1998. Improving effectiveness of energy assessment and benchmarking (Draft). The Usable Buildings Trust, York, UK.

Persily, A.K. 1994. Manual Ventilation Assessment in Mechanically Ventilated Commercial Buildings. NISTIR Report 5329. Building and Fire Research Laboratory, National Institute of Standards and Technology, Gaithersburg, MD.

Hewitt, D., Higgins, C, Heatherly, P., and C. Turner. 2006. A Market-Friendly Post-Occupancy Evaluation:  Building Performance Report. New Buildings Institute, White Salmon, WA.

Barley, D., Deru, M., Pless, S., and P. Torcellini. 2005. Procedure for Measuring and Reporting Commercial Building Energy Performance. Report NREL/TP-550-38601, National Renewable Energy Laboratory, Golden ,CO.

Tiller, D., Henze, G.  "Online Domestic Hot Water End-Use Database."  ASHRAE RP-1172.

Torcellini, P., Pless, S., Deru, M., Griffith, B., Long, N., Judkoff, R.  "Lessons Learned from Case Studies of Six High-Performance Buildings."  NREL/TP-550-37542, National Renewable Energy Laboratory, 2006.

Torcellini, P. and M. Deru. 2005. Performance Metrics Research Project - Final Report. NREL Technical Report NREL/TP-550-38700. National Renewable Energy Laboratory, Golden, CO.

Pless, S., Deru, M., Torcellini, P., Hayter, S.  "Procedure for Measuring and Reporting the Performance of Photovoltaic Systems in Buildings."  NREL/TP-550-38603.  National Renewable Energy Laboratory, 2005.

Deru, M., Blair, N., and P. Torcellini. 2005. Procedure to Measure Indoor Lighting Performance. Report NREL/TP-550-38602.  National Renewable Energy Laboratory, Golden, CO.

Walker, A., Thompson, A., Mills, D., and G. Kats. 1999. Renewable Energy and the International Performance Measurment and Verification Protocol. Report NREL/CP-710-26208.  National Renewable Energy Laboratory, Golden, CO.

Deru, M., Torcellini, P. 2005. Standard Definitions of Building Geometry for Energy Evaluation. Report NREL/TP-550-38600.  National Renewable Energy Laboratory, Golden, CO.

Wong, L.T., Mui, K.W. 2007. Evaluation on four sampling schemes for assessing indoor air quality. Building and Environment 42: 1119-1125

Saari, A., Aalto, L. 2006. Indoor environment quality contracts in building projects. Building Research and Information 34(1): 66-74.

Spasokukotskiy, K., Trankler, H., Lukasheva, K. 2003. Model-based method to measure thermal comfort in buildings. IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications 8-10 Sept. 2003, Lviev, Ukraine.

Mui, K.W., Wong, L.T., Ho, W.L. 2006. Evaluation on sampling point densities for assessing indoor air quality. Building and Environment 41: 1515-1521.

Atif, M.R., Love, J.A., Littlefair, P. 1997. Daylighting Monitoring Protocols & Procedures for Buildings. T21/D2.1/97-10. International Energy Agency, Stockholm, Sweden (IEA Task 21/Annex 29 Daylight in Buildings).

MacDonald, M. 2004. Commercial Sector and Energy Use. Encyclopedia of Energy, Vol. 1. Elsevier, Amsterdam, The Netherlands, pp. 605-616.

Haberl, J.S., Culp, C.H. 2005. Review of Methods for Measuring and Verifying Savings from Energy Conservation Retrofits to Existing Buildings. Energy Systems Laboratory Report ESL-TR-03/09-01, Energy Systems Laboratory, Texas A&M University, College Station, TX.

United States Environmental Protection Agency. 2003. A Standardized EPA Protocol for Characterizing Indoor Air Quality in Large Office Buildings. Office of Radiation and Indoor Air and Office of Modeling, Monitoring Systems, and Quality Assurance, U.S. Environmental Protection Agency, Washington D.C., 311 pp. (February).

MacDonald, J.M. and D.M. Wasserman. 1989. Investigation of Metered Data Analysis Methods for Commercial and Related Buildings. ORNL Report ORNL/CON-279. U.S. Department of Energy, Oak Ridge National Laboratory, Oak Ridge, TN.

Faist, A., Citherlet, S., Pasquale, F.D. 1997. ACOUSALLE, a computer program with expertise for the planning and analysis of the acoustics of indoor spaces. Advances in Engineering Software 28:211-216.

Persily, A., Gorfain, J. 2004. Analysis of Ventilation Data from the U.S. Environmental Protection Agency Building Assessment Survey and Evaluation (BASE) Study. NIST Report NISTIR 7145. National Institute of Standards and Technology, Gaithersburg, MD.

Misuriello, H.P. 1987. A uniform procedure for the development and dissemination of monitoring protocols. ASHRAE Transactions 93(1).

Dols, S., Persily, A., Nabinger, S. 1996. Indoor air quality in green buildings: A review and a case study. Proceedings of IAQ '96 Conference, Baltimore Maryland, October, 6-8.

"Dols, S., Persily, A., Nabinger, S. 1994. Development and application of an indoor air quality commissioning program in a new office building. Proceedings of IAQ 94 Engineering Indoor Environments, St. Louis.

Moeck, M.  2001. Analysis and synthesis of lighting atmospheres. Journal of the IESNA 30(1): 141-153.

Girman, J.R., Baker, B.J., Burton, L.E. 2002. Prevalence of potential sources of indoor air pollution in U.S. office buildings. Proceedings of Indoor Air 2002.

Burton, L.E., Baker, B., Hanson, D., Girman, J.G., Womble, S.E., McCarthy, J.F. 2000. Baseline information on 100 randomly selected office buildings in the United States (BASE): Gross building characteristics. Proceedings of Healthy Buildings 2000, Vol.1.

Womble, S.E., Girman, J.R., Ronca, E.L., Axelrad, R., Brightman, H.S., McCarthy, J.F. 1995. Developing baseline information on buildings and indoor air quality (BASE '94): Part 1 - study design, building selection, and building descriptions. Presented at Healthy Buildings '95, Sept. 11-14.

Siefert, B., Knoppel, H., Lanting, R., Person, A., Siskos, P., Wolkoff, P. 1989. Report No. 6: Strategy for Sampling Chemical Substances in Indoor Air. European Concerted Action: Indoor Air Quality & Its Impact on Man, COST Project 613, Commission of the European Communities.

Lundgren, B., Crump, D., Knoppel, H., Laurent, A., Lebret, E., Rothweiler, H., Seifert, B., Wolkoff, P., Cavallo, D. 1994. Report No. 14: Sampling strategies for volatile organic compounds (VOCs) in indoor air. European Collaborative Action: Indoor Air Quality & Its Impact on Man, Formerly COST Project 613, European Commission.

Berglund, B., Bluyssen, P., Clausen, G., Garriga-Trillo, A., Gunnarsen, L., Knoppel, H., Lindvall, T., MacLeod, P., Molhave, L., Winneke, G. 1999. Report No. 20: Sensory Evaluation of Indoor Air Quality. European Collaborative Action: Indoor Air Quality & Its Impact on Man, ECA-IAQ, European Commission.

McWilliams, J. 2002. Review of Airflow Measurement Techniques. LBNL Report LBNL-49747. Lawrence Berkeley National Laboratory, Berkeley, CA.

Burt, T. 2000. The Acoustic Environment: Responses to Sound. Indoor Air Quality Handbook. McGraw-Hill, San Francisco.

Fanger, P.O. 2000. Perceived Air Quality and Ventilation Requirements. Indoor Air Quality Handbook. McGraw-Hill, San Francisco.

Nagda, N.L., Rector, H.E. 2000. Instruments and Methods for Measuring Indoor Air Quality. Indoor Air Quality Handbook. McGraw-Hill, San Francisco.

Persily, A. 2000. Measuring Ventilation Performance. Indoor Air Quality Handbook. McGraw-Hill, San Francisco.

Muller, C., Prina, A. Achieving IAQ and Energy Conservation Goals with ASHRAE 62.1-2004.

Acoustical Society of America. 2006. Specification for sound level meters. ANSI/ASA Standard S1.4-1983 (R2006). Acoustical Society of America, Melville, NY. 

Acoustical Society of America. 2001. Preferred frequencies, frequency levels, and band numbers for acoustical measurements. ANSI/ASA Standard S1.6-1984 (R2001). Acoustical Society of America, Melville, NY. 

Acoustical Society of America. 2001. Method for calibration of microphones. ANSI/ASA Standard S1.10-1966 (R2001). Acoustical Society of America, Melville, NY. 

Acoustical Society of America. 2004. Specification for octave-band and fractional-octave-band analog and digital filters. ANSI/ASA Standard S1.11-2004. Acoustical Society of America, Melville, NY. 

Acoustical Society of America. 1999. Measurement of sound pressure levels in air. ANSI/ASA Standard S1.13-1995 (R1999). Acoustical Society of America, Melville, NY. 

Acoustical Society of America. 2006. Design response of weighting networks for acoustical measurements. ANSI/ASA Standard S1.42-2001 (R2006). Acoustical Society of America, Melville, NY. 

Acoustical Society of America. 1997. Procedure for the computation of loudness of noise. ANSI/ASA Standard S3.4-1980 (R1997). Acoustical Society of America, Melville, NY. 

Acoustical Society of America. 1999. Criteria for Evaluating Room Noise. ANSI/ASA Standard S12.2-1995 (R1999). Acoustical Society of America, Melville, NY. 

Acoustical Society of America. 2002. Engineering method for determinination of sound power levels of noise sources using sound intensity. ANSI/ASA Standard S12.12-1992 (R2002).  Acoustical Society of America, Melville, NY. 

American Society for Testing and Materials. 2002. Test method for evaluating masking sound in open offices using A-weighted and one-third octave band sound pressure levels. ASTM Standard E1573-02. American Society for Testing and Materials, Conshohocken, PA. 

Acoustical Society of America. 2002. American national standard guidelines for the use of sound power standards and for the preparation of noise test codes. ANSI/ASA Standard S12.30-1990 (R2002). Acoustical Society of America, Melville, NY.

Acoustical Society of America. 1999. Reference quantities for acoustical levels. ANSI/ASA Standard S12.56-1999/ISO 3746:1995. Acoustical Society of America, Melville, NY.

International Organization for Standardization.  1993. Acoustics - Determination of sound power levels of noise sources using sound intensity; part 1:  Measurement at discrete points. ISO Standard 9614-1:1993. International Organization for Standardization, Geneva, Switzerland.

International Organization for Standardization. 1996. Acoustics - Determination of sound power levels of noise sources using sound intensity; part 2:  Measurement by scanning. ISO Standard 9614-2:1996. International Organization for Standardization, Geneva, Switzerland.

National Environmental Balancing Bureau. 2006. Procedural Standards for Measurement and Assessment of Sound and Vibration, 2nd Edition. National Environmental Balancing Bureau, Gaithersburg, MD. 

American Society for Testing and Materials. 2001. Test method for determination of volatile organic chemicals in atmospheres (canister sampling method). ASTM Standard D5466-01. American Society for Testing and Materials, Conshohocken, PA.

American Society for Testing and Materials. 1995. Guide for using probability sampling methods in studies of indoor air quality in buildings. ASTM Standard D5791-95. American Society for Testing and Materials, Conshohocken, PA.

American Society for Testing and Materials. 1998. Guide for using indoor carbon dioxide concentrations to evaluate indoor air quality and ventilation. ASTM Standard D6245-98. American Society for Testing and Materials, Conshohocken, PA.

American Society for Testing and Materials. 1998. Guide for placement and use of diffusion controlled passive monitors for gaseous pollutants in indoor air. ASTM Standard D6306-98. American Society for Testing and Materials, Conshohocken, PA.

American Society for Testing and Materials. 2004. Test method for determination of metals and metalloids airborne particulate matter by inductively coupled plasma atomic emissions spectrometry (ICP-AES). ASTM Standard D7035-04. American Society for Testing and Materials, Conshohocken, PA.

International Organization for Standardization. 2001. Indoor air - part 3: Determination of formaldehyde and other carbonyl compounds - active sampling method. ISO Standard 16000-3:2001. International Organization for Standardization, Geneva, Switzerland.

International Organization for Standardization. 2001. Workplace air quality - sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - part 1: Pumped sampling method. ISO Standard 16200-1:2001. International Organization for Standardization, Geneva, Switzerland.

International Organization for Standardization. 2000. Workplace air quality - sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - part 2: Diffusive sampling method. ISO Standard 16200-2:2000.  International Organization for Standardization, Geneva, Switzerland.

International Organization for Standardization. 2001. Workplace air quality - determination of total isocyanate group in air using 2-(1-methoxyphenyl) piperazine and liquid chromatography. ISO Standard 16702-1:2001. International Organization for Standardization, Geneva, Switzerland.

Underwriters Laboratories. 1998. Standard for energy management equipment. UL Standard 916. Underwriters Laboratories, Northbrook, IL.

International Organization for Standardization. 1994. Moderate thermal environments - Determination of the PMV and PPD indices and specification of the conditions for thermal comfort. ISO Standard 7730:1994. International Organization for Standardization, Geneva, Switzerland.

Cohen E.R. 1990. The expression of uncertainty in physical measurements. 1990 Measurement Science Conference Proceedings.

Deutsches Institut für Normung. 2003. Method for predicting loudness of sound spectra with tonal qualities. DIN Standard 45631:1991-03. Deutsches Institut für Normung, Berlin, Germany.

International Organization for Standardization. 1975. Method for calculating loudness level. ISO Standard 532-1975. International Organization for Standardization, Geneva, Switzerland.

Chartered Institution of Building Services Engineers. 2006. CIBSE Code for Lighting. Chartered Institution of Building Services Engineers, London, UK, 130 pp.

CIBSE Code for Interior Lighting.

Illuminating Engineering Society of North America. 1999. Recommended Practice of Daylighting. IESNA RP-5-99. Illuminating Engineering Society of North America, New York, N.Y.

International Energy Agency. 2000. Daylight in Buildings: A Sourcebook on Daylighting Systems and Components. International Energy Agency, ECBS Annex 29, Lawrence Berkeley National Laboratory, Berkeley, CA (July). 

Illuminating Engineeting Society of North America. 2004. American National Standard Practice for Office Lighting. ANSI/IESNA RP-1-04 Illuminating Engineering Society of North America, New York, N.Y.

Illuminating Engineering Society of North America. 1989. Recommended Practice for the Lumen Method of Daylight Calculations. IESNA RP-23-89. Illuminating Engineeting Society of North America, New York, NY. 

American Society of Heating, Refrigerating, and Air-Conditioning Engineers. 1999. Standard Methods of Measuring and Expressing Building Energy Performance.  ASHRAE Standard 105-1984 (R99). American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society of Heating, Refrigerating, and Air-Conditioning Engineers. 2007. Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings. ASHRAE Proposed Standard 189P-2007. American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

Efficiency Valuation Organization.  2007.  International Performance Measurement and Verification Protocol (IPMVP): Volume 1 - Concepts and Options for Determining Energy and Water Savings.  EVO 10000-1:2007.  Efficiency Valuation Organization, San Francisco, CA (April).

Efficiency Valuation Organization.  2006.  International Performance Measurement and Verification Protocol (IPMVP): Volume III, Part I - Concepts and Practices for Determining Energy Savings in New Construction.  EVO 30000-1:2006.  Efficiency Valuation Organization, San Francisco, CA.

Humphrey, M. 2005. Quantifying occupant comfort: are combined indices of the indoor environment practicable? Building Research & Information 33(4):317-325.

Kampschroer, K. and J.H. Heerwagen. 2005. The strategic workplace: development and evaluation. Building Research & Information 33(4):326-337.

Nicol, F. and S. Roaf. 2005. Post-occupancy evaluation and field studies of thermal comfort. Building Research & Information 33(4):338-346.

Bordass, B. and A. Leaman. 2005. Making feedback and post-occupancy evaluation routine 1: A portfolio of feedback techniques. Building Research & Information 33(4):347-352.

Way, M., Bordass, B. and A. Leaman. 2005. Making feedback and post-occupancy evaluation routine 2: Soft Landings - involving design and building teams in improving performance. Building Research & Information 33(4):353-360.

Way, M., Bordass, B., and A. Leaman. 2005. Making feedback and post-occupancy evaluation routine 3: Case studies of the use of techniques in the feedback portfolio. Building Research & Information 33(4):361-375.

Cohgen, R., Standeven, M., Bordass, B. and A. Leaman. 2001. Assessing building performance in use 1: the Probe process. Building Research & Information 29(2):85-102.

Bordass, B., Cohen, R., Standeven, M. and A. Leaman. 2001. Assessing building performance in use 2: technical performance of the Probe buildings. Building Research & Information 29(2):103-113.

Bordass, B., Cohen, R., Standeven, M. and A. Leaman. 2001. Assessing building performance in use 3: energy performance of the Probe buildings. Building Research & Information 29(2):114-128.

Leaman, A. and B. Bordass. 2001. Assessing building performance in use 4: the Probe occupant surveys and their implications. Building Research & Information 29(2):129-143.

Bordass, B., Leaman, A. and P. Ruyssevelt. 2001. Assessing building performance in use 5: conclusions and implications. Building Research & Information 29(2):144-157.

Zimmerman, A. and M. Martin. 2001. Post-occupancy evaluation: benefits and barriers. Building Research & Information 29(2):168-174.

The Probe Team. 2000. Barclayard headquarters. Building Services Journal, pp. 37-42 (March).

Leaman, A., Bunn, R. and P. Ruyssevelt. 2000. Birchensale School 1. Building Services Journal, pp. 49-52 (June).

Ruyssevelt, P. and R. Bunn. 2001. Birchensale School 2. Building Services Journal, pp. 41-44 (April).

The Probe Team. 1998. Probe 13: Charities aid foundation. Building Services Journal, pp. E20-E24 (February).

The Probe Team. 1998. Probe 17: Co-operative retail services hq. Building Services Journal, pp. E20-E25 (October).

The Probe Team. 1998. Probe 14: Elizabeth Fry Building. Building Services Journal, pp. E20-E25 (April).

Bordass, B., Cohen, R. and M. Standeven. 1997. Probe 9: Energy and engineering Probe technical review. Building Services Journal, pp. E21-E25 (April).

The Probe Team. 1998. Probe 16: Marston book services. Building Services Journal, pp. 27-32 (August).

The Probe Team 2000. Orchard Learning Resources Centre. Building Services Journal, pp. 35-40 (July).

The Probe Team. 1999. Probe 18: Portland building. Building Services Journal, pp. E23-E28 (January).

The Probe Team. 1999. Probe special report. Building Services Journal, pp. 18-20 (December).

Leaman, A. and B. Bordass. 1998. Probe 15: Productivity - the killer variables. Building Services Journal, pp. E19-E21 (June).

Bordass, B. and R. Bunn. 2001. School of art and design 2. Building Services Journal, pp. 43-46 (August).

The Probe Team. 2002. The Centre for Mathematical Sciences. Building Services Journal, pp. 47-52 (July).

American Society of Heating, Refrigerating, and Air-Conditioning Engineers. 1991. Handbook of HVAC Applications, Chapter 37: Building Energy Monitoring. American Society of Heating Refrigeration Air-conditioning Engineers, Atlanta, GA.

American Society of Heating, Refrigerating, and Air-Conditioning Engineers. 1993. HVAC02 Toolkit: Algorithms and Subroutines for Secondary HVAC System Energy Calculations. ASHRAE Research Project – 827-RP, Authors: Brandemuehl, M., Gabel, S., Andresen, I., American Society of Heating Refrigeration Air-conditioning Engineers, Atlanta, GA.

American Society of Heating, Refrigerating, and Air-Conditioning Engineers. 1997. Handbook of Fundamentals, Chapter 30: Energy Estimating and Modeling Methods. American Society of Heating Refrigeration Air-conditioning Engineers, Atlanta, GA., p. 30.27 (Copied with permission).

American Society of Heating, Refrigerating, and Air-Conditioning Engineers. 1969. Procedures for Determining Heating and Cooling Loads for Computerized Energy Calculations: Algorithms for Building Heat Transfer Sub-routines. M. Lokmanhekim, ed., American Society of Heating Refrigeration Air-conditioning Engineers, Atlanta, GA.

American Society of Heating, Refrigerating, and Air-Conditioning Engineers. 1971. Procedures for Simulating the Performance of Components and Systems for Energy Calculations. Stoecker, W.F., ed., 2nd edition, American Society of Heating Refrigeration Air-conditioning Engineers, Atlanta, GA

American Society of Mechanical Engineers. 1974. ASME 1974 Performance Test for Steam Units -- PTC 4.1a.  American Society of Mechanical Engineers, New York.

American Society of Mechanical Engineers. 1974. Power Test Codes (PTC) 4.1a, Steam Generating Units. American Society of Mechanical Engineers, New York.

Ahmed, M., Gilman, D., Kim, S., Haberl, J., Culp, C. 2005. Development of a web-based emissions reduction calculator for code-compliant commercial construction. Proceedings of the 5th International Conference for Enhanced Building Operation, Pittsburg, PA, published on CDROM (October). 

Baker,D., and Hurley, W. 1984. On-Site Calibration of Flow Metering Systems Installed in Buildings. NBS Building Science Series Report No. 159,  (January).

Benedict, R. 1984.  Fundamentals of Temperature,  Pressure,  and Flow Measurement.  John Wiley and Sons,  New York, N.Y.,  ISBN 0-471-89383-8.

Bevington, P. R.,  Robinson, D.K.,  1992.  Data Reduction and Error Analysis for the Physical Sciences, 2nd Edition,  McGraw-Hill, New York,  ISBN-0-07-911243-9.

Bronson, D., Hinchey, S., Haberl, J., O'Neal, D. 1992. A Procedure for Calibrating the DOE-2 Simulation Program to Non-Weather-Dependent Measured Loads. ASHRAE Transactions 98(1).

Babcock and Wilcox. 1992. Steam: Its generation and Use. Babcock and Wilcox, Barberton, Ohio, ISBN 0-9634570-0-4.

Baltazar-Cervantes, J.C., Liu, Z., Gilman, D., Haberl, J., Culp, C. 2005. “Development of a Web-based Emissions Reduction Calculator for Retrofits to Municipal Water Supply and Waste Water Facilities”, Proceedings of the 5th International Conference for Enhanced Building Operation”, Pittsburg, PA, published on CDROM (October).

Bou-Saada, T. 1994. An improved procedure for developing a calibrated hourly simulation model of an electrically heated and cooled commercial building. Master’s Thesis, Mechanical Engineering Department, Texas A&M University (December).

Bou-Saada, T., Haberl, J., Vajda, J., Harris, L. 1996. Total utility savings from the 37,000 fixture lighting retrofit to the USDOE Forrestal Building. Proceedings of the 1996 ACEEE Summer Study (August).

Brandemuehl, M., Krarti, M., Phelan, J. 1996. 827-RP Final Report:  Methodology Development to Measure In-Situ Chiller, Fan, and Pump Performance. American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA (March).

Clarke, J.A, Strachan, P.A., Pernot, C. 1993. An approach to the calibration of building energy simulation models. ASHRAE Transactions 99(2):917-927.

Claridge, D.E., Haberl, J.S., Sparks, R., Lopez, R., Kissock, K. 1992. Monitored commercial building energy data:  Reporting the results. ASHRAE Transactions Symposium Paper 98(1):636-652.

Cox, R., Haberl, J., Claridge, D. 1993. A study of energy use in grocery stores. ASHRAE Transactions 99(1):1301 - 1314 (January).

Diamond, S.C., Hunn, B.D. 1981. Comparison of DOE-2 computer program simulations to metered data for seven commercial buildings. ASHRAE Transactions 87(1):1222-1231.

Doebelin, E. 1990.  Measurement Systems.  McGraw-Hill, New York, N.Y.,  ISBN 0-07-017338-9,  ISBN 0-07-017338-9.

Dukelow, S.G. 1991. The Control of Boilers. Research Triangle Park, NC: Instrument Society of America.

Dyer, F.D., Maples, G. 1981. Boiler Efficiency Improvement. Boiler Efficiency Institute. Auburn, AL.

Edison Electric Institute. 1981.  Handbook for Electricity Metering. Edison Electric Institute, Washington, D.C., ISBN-0-931032-11-3.

Eto, J. 1988. On using degree-days to account for the effects of weather on annual energy use in office buildings. Energy and Buildings 12(2):113-127.

Fels, M. 1986. Special issue devoted to measuring energy savings: The scorekeeping approach. Energy and Buildings 9(1,2) Elsevier Press, Lausanne, Switzerland (February/May).

Feuermann, D., Kempton, W. 1987. ARCHIVE: Software for the management of field data. Center for Energy and Environmental Studies Report No.216, Princeton University.

Fracastoro, G. V., and Lyberg, M. D.  1983. Guiding Principles Concerning Design of Experiments, Instrumentation and Measuring Techniques. International Energy Agency and the Swedish Council for Building Research, Stockholm, Sweden.

Garcia-Borras, T. 1983. Manual for Improving Boiler and Furnace Performance. Houston, TX: Gulf Publishing Company.

Gordon, J.M., Ng, K.C. 1994. Thermodynamic modeling of reciprocating chillers. Journal of Applied Physics 75(6):2769-2774.

Gordon, J.M., Ng, K.C. 1995. Predictive and diagnostic aspects of a universal thermodynamic model for chillers. International Journal of Heat Mass Transfer 38(5):807.

Gordon, J.M., Ng, K.C., Chua, H.T. 1995. Centrifugal chillers: thermodynamic modeling and a diagnostic case study. International Journal of Refrigeration 18(4):253.

Haberl, J., Vajda. E. 1988. Use of metered data analysis to improve building operation and maintenance: Early results from two federal complexes. Proceedings of the ACEEE 1988 Summer Study on Energy Efficient Buildings, Pacific Grove, CA, pp. 3.98 – 3.111 (August).

Haberl, J., Claridge, D., Turner, D., O’Neal, D., Heffington, W., Verdict, M. 2002. LoanSTAR after 11 years: A report on the successes and lessons learned from the LoanSTAR Program. Proceedings of the 2nd International Conference for Enhanced Building Operation, Richardson, Texas, pp. 131–138 (October).

Haberl, J.S., Reddy, T.A., Figueroa, I., Medina, M. 1997. Overview of LoanSTAR chiller monitoring and analysis of in-situ chiller diagnostics using ASHRAE RP827 test method. Proceedings of the PG&E Cool Sense National Integrated Chiller Retrofit Forum (September).

Haberl, J., Bronson, D., Hinchey, S., O'Neal, D. 1993. “Graphical Tools to Help Calibrate the DOE-2 Simulation Program to Non-weather Dependent Measured Loads,” ASHRAE Journal, Vol. 35, No.1, pp. 27-32 (January).

Haberl, J., Bronson, D., O'Neal, D. 1995. “An Evaluation of the Impact of Using Measured Weather Data Versus TMY Weather Data in a DOE-2 Simulation of an Existing Building in Central Texas,” ASHRAE Transactions, Technical Paper No. 3921, Vol. 101, Pt. 2 (June).

Haberl, J., Thamilseran, S. 1996. “Predicting Hourly Building Energy Use: The Great Energy Predictor Shootout II: Measuring Retrofit Savings -- Overview and Discussion of Results,” ASHRAE Transactions-Research, Vol. 102, Pt. 2, pp. 419 - 435 (June).

Haberl, J., Abbas, M. 1998. Development of graphical indices for viewing building energy data: Part 2. ASME Journal of Solar Energy Engineering 120:162-167 (August).

Haberl, J., Abbas, M. 1998. Development of graphical indices for viewing building energy data: Part 1. ASME Journal of Solar Energy Engineering 120:156-161 (August).

Haberl, J., Athar, A., Abbas, M., Claridge, D., MacDonald. 1992. Comparing monitoring protocols for energy retrofits. ASHRAE Transactions 98(1):1081–1096 (January).

Haberl, J., Beasley, R., Thompson, D. 1993. Characterizing steam and chilled-water use for a large campus in Central Texas. ASHRAE Transactions 99(2):465-476 (June).

Haberl, J., Claridge, D. 1987. An expert system for building energy consumption analysis: Prototype results. ASHRAE Transactions 93(1):979-998 (January).

Haberl, J., Claridge, D. 1985. Retrofit energy studies of a recreation center. ASHRAE Transactions 91(2):1421-1433 (June).

Haberl, J., Claridge, D., Harrje, D. 1990b. The design of field experiments and demonstrations. Proceedings of the IEA Field Monitoring Workshop, Gothenburg, Sweden, April.

Haberl, J., Englander, S., Reynolds, C., Nyquist, T., McKay, M.  1989. Whole campus performance analysis methods. Sixth Annual Symposium on Improving Building Systems in Hot and Humid Climates, Texas A&M University, College Station, Texas, October.

Haberl, J. and P. Komor. 1990. Improving commercial building energy audits: How daily and hourly consumption data can help. ASHRAE Journal 32(9):26-36 (September).

Haberl, J. and P. Komor. 1990. Improving commercial building energy audits: How annual and monthly consumption data can help. ASHRAE Journal 32(8):26-33 (August).

Haberl, J., Norford, L. and J. Spadaro. 1989. Diagnosing building operational problems: Intelligent systems for diagnosing operational problems in  HVAC systems. ASHRAE Journal, June.

Haberl, J., Turner, W.D., Finstad, C., Scott, F. and J. Bryant. 1992. Calibration of flowmeters for use in HVAC systems monitoring. Proceedings of the 1992 ASME/JSES/KSES International Solar Energy Conference.

Haberl, J. and S. Thamilseran. 1998. Predicting hourly building energy use: The great energy predictor shootout II: Measuring retrofit savings. ASHRAE Journal 40(1):49-56 (January).

Haberl, J., MacDonald, M. and A. Eden. 1988. An overview of 3-D graphical analysis using DOE-2 hourly simulation data. ASHRAE Transactions 94(1):212-227 (January).

Harrje, D. T. 1982. Monitoring energy use - What is needed?. Proceedings of the ACEEE Summer Study on Energy Efficiency in Buildings, August.

Harrje, D. T., Kirkpatrick, D. L., Norford, L. K., and R.E. Seroussi. 1984. Data collection and analysis hardware for measuring building energy use. Doing better setting an agenda for the second decade, ACEEE, Vol. C, pp. 177-192, August.

Harrje, D. T.  1986. Obtaining building energy data, problems and solutions. Proceedings of the Field Data Acquisition for Building and Equipment Energy-Use Monitoring Workshop,  ORNL Publication No. CONF-8510218, pp. 205-209.

Hinchey, S.B. 1991. Influence of Thermal Zone Assumptions on DOE-2 Energy Use Estimations of a Commercial Building. M.S. Thesis, Energy Systems Report No. ESL-TH-91/09-06, Texas A&M University.

Hsieh, E. H., Norford, L. K., Socolow, R. H.  1989. Calibrated computer models to track building energy use: The role of the tenant and operator decisions. Energy and Buildings.

Hsieh, E.S. 1988. Calibrated Computer Models of Commercial Buildings and Their Role in Building Design and Operation. M.S. Thesis, PU/CEES Report No. 230, Princeton University, Princeton, NJ.

Hunn, B.D., Banks, J.A., Reddy, S.N. 1992. Energy Analysis of the Texas Capitol Restoration. The DOE-2 User News. 13(4): 2-10.

Huang, P. 1991. Humidity measurements and calibration standards. ASHRAE Transactions 97:3521.

Hyland, R. W., and Hurley, C. W.  1983.  General Guidelines for the On-Site Calibration of Humidity and Moisture Control Systems in Buildings. N.B.S. Building Science Series 157, September.

Hurley, C. W., and Schooley, J. F. 1984. Calibration of Temperature Measurement Systems Installed in Buildings. N.B.S. Building Science  Series 153, January.

Hurley,  W. 1985. Measurement of Temperature, Humidity, and Fluid Flow. Field Data Acquisition for Building and Equipment Energy-use Monitoring, ORNL Report No. CONF-8510218,  (March).

International Energy Agency. 1991. Field Monitoring For a Purpose:  The design of field experiments and demonstrations. International Energy Agency Workshop, 2-5 April 1990, Chalmers University, Gothenburg, Sweden (April). 

Instrument Society of America. 1976. Recommended Environments for Standards Laboratories. Instrument Society of America - Recommend Practice, Research Triangle Park, North Carolina.

Katipamula, S., Claridge, D. 1992. Monitored air handler performance and comparison with a simplified system model. ASHRAE Transactions 98(2):341-351.

Katipamula, S., Claridge, D.E., 1993. Use of simplified systems models to measure retrofit savings. ASME Journal of Solar Energy Engineering 115:57-68, May.

Katipamula, S., K., and Haberl, J.  1991. A methodology to identify diurnal load shapes for non-weather dependent electric end-uses. Solar Engineering, 1991: Proceedings of the ASME-JSES -JSME International Solar Energy Conference, pp. 457-467, Reno, NV, March.

Kaplan, M.B., Jones, B., Jansen, J. 1990a DOE-2.1C model calibration with monitored end-use data. Proceedings from the ACEEE 1990 Summer Study on Energy Efficiency in Buildings, Vol. 10, pp. 10.115-10.125.

Kaplan, M.B., Caner, P., Vincent, G.W. 1992. Guidelines for energy simulation of commercial buildings. Proceedings from the ACEEE 1992 Summer Study on Energy Efficiency in Buildings, Vol. 1, pp. 1.137-1.147.

Kissock, J.K, Xun,W., Sparks, R., Claridge, D., Mahoney, J. Haberl, J. 1994. EModel Version 1.4de. Texas A&M University, Energy Systems Laboratory, Department of Mechanical Engineering, Texas A&M University, December.

Knebel, D.E. 1983. Simplified Energy Analysis Using the Modified Bin Method. American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., Atlanta, Georgia.

Kreider, J.F., Wang, X.A. 1991. Artificial neural networks demonstration for automated generation of energy use predictors for commercial buildings. ASHRAE Transactions 97(1).

Kreider, J., Haberl, J. 1994. Predicting hourly building energy usage: The great energy predictor shootout: Overview and discussion of results. ASHRAE Transactions 100(2):1104-1118 (June).

Kreider, J. Haberl, J. 1994. Predicting hourly building energy usage: The results of the 1993 great energy predictor shootout identify the most accurate method for making hourly energy use predictions. ASHRAE Journal 35(3):72-81 (March).

Liu, M. and D. Claridge. 1995. Application of calibrated HVAC systems to identify component malfunctions and to optimize the operation and control schedules. ASME/JSME International Solar Energy Conference, pp. 209-217.

Liu, M. and D.E. Claridge. 1995. Application of calibrated HVAC system models to identify component malfunctions and to optimize the operation and control schedules. Solar Engineering 1995, ASME/JSME/JSES International Solar Energy Conference, Maui, Hawaii, March.

Liu, M. and D.E. Claridge. 1998. Use of calibrated HVAC system models to optimize system operation. Journal of Solar Energy Engineering, May, Vol. 120.

Liu, M., Wei, G. and D.E. Claridge. 1998. Calibrating AHU models using whole building cooling and heating energy consumption data. Proceedings of 1998 ACEEE Summer Study on Energy Efficiency in Buildings, Vol. 3.

Liu, Z., Haberl, J., Gilman, D., Culp, C., Yazdani, B., 2006. “Development of a Web-based Emissions Reduction Calculator for High Efficiency Pump/Motor Retrofits”, Proceedings of the 7th International Conference for Enhanced Building Operation”, Shenzhen, China, published on CD ROM (October).

Liu, Z., Haberl, J., Gilman, D., Culp, C., Yazdani, B., 2006. “Development of a Web-based Emissions Reduction Calculator for Storm Water/Infiltration Sanitary Sewage Separation”, Proceedings of the 6th International Conference for Enhanced Building Operation”, Shenzhen, China, published on CD ROM (October).

Liu, Z., Gilman, D., Haberl, J., Culp, C. 2005. “Development of a Web-based Emissions Reduction Calculator for Street Light and Traffic Light Retrofits”, Proceedings of the 5th International Conference for Enhanced Building Operation”, Pittsburg, PA, published on CDROM (October).

Lyberg, M. 1987. Source Book for Energy Auditors. Vols. 1, 2, International Energy Agency, Stockholm, Sweden (Report on IEA Task XI).

MacDonald, J. M., Sharp, T. R., and Gettings, M. B.  1989.  A Protocol for Monitoring Energy Efficiency Improvements in Commercial and Related Buildings. Oak Ridge National Laboratory Report ORNL/CON-291, September.

Manke, J., Hittle, D., Hancock, C.E. 1996. Calibrating building energy analysis models using short term test data. Proceedings of the 1996 International ASME Solar Energy Conference, San Antonio, TX, p. 369.

McLain, H.A., Leigh, S.B., MacDonald, J.M. 1993. Analysis of Savings Due to Multiple Energy Retrofits in a Large Office Building. Oak Ridge National Laboratory, ORNL Report No. ORNL/CON-363, Oak Ridge, TN.

Olsen, L.  1974.  Introduction to Liquid Flow Metering and Calibration of Liquid Flowmeters. N.B.S. Technical Note 831.

Omnicomp. 1984. Faser Software. Omnicomp, Inc., State College, PA, (monthly accounting software with VBDD capability).

O'Neal, D., Bryant, J., Turner, W., Glass, M.  1990. Metering and calibration in LoanSTAR buildings. Proceedings of the Seventh Annual Symposium on Improving Building Systems in Hot and Humid Climates,  Texas A&M University, College Station, Texas, pp. 41-46 (October).

Miller, R. 1996. Flow Measurement Engineering Handbook, 3rd ed. McGraw Hill, New York, N.Y.

Payne, F.W. 1985. Efficient Boiler Operations Sourcebook. Atlanta, GA: The Fairmont Press.

Rabl, A. 1988. Parameter estimation in buildings: Methods for dynamic analysis of measured energy use. Journal of Solar Energy Engineering 110:52-66.

Rabl, A., Riahle, A. 1992. Energy signature model for commercial buildings: Test with measured data and interpretation. Energy and Buildings 19:143-154.

Ramboz, J. D. and McAuliff, R. C.  1983.  A Calibration Service for Wattmeters and Watt-hour Meters. N.B.S. Technical Note 1179.

Reddy, T. A.  1989.  Application of dynamic building inverse models to three occupied residences monitored non-intrusively. Proceedings of the Thermal Performance of the Exterior Envelopes of Buildings IV, ASHRAE/DOE/BTECC/CIBSE, Orlando, Florida, December.

Robinson, J., Bryant, J., Haberl, J, Turner, D. 1992. Calibration of tangential paddlewheel insertion flowmeters.  Proceedings of the 1992 Hot and Humid Conference,  Texas A&M University,  Energy Systems Laboratory  Report No. ESL-PA-92/02-09.

Ruch, D., Chen, L, Haberl, J., Claridge, D.  1991. A change-point principal component analysis (CP/PCA) method for predicting energy usage in commercial buildings: The PCA model. Solar Engineering 1991: Proceedings of the ASME-JSES-JSME International Solar Energy Conference, pp.441-448, Reno, Nevada, March.

Ruch, D., Claridge, D.  1991. A four parameter change-point model for predicting energy consumption in commercial buildings. Solar Engineering 1991: Proceedings of the ASME-JSES -JSME International Solar Energy Conference, Reno, Nevada, March.

Ruch, D., Chen, L., Haberl, J., Claridge, D. 1993. A change-point principal component analysis (CP/PCA) method for predicting energy usage in commercial buildings: The PCA model. ASME Journal of Solar Energy Engineering, ASME, New York, N.Y., Vol. 115, pp. 77 - 84 (May).

Socolow, R. 1978. Saving Energy in the Home: Princeton’s Experiments at Twin Rivers. Ballinger Publishing Company, Cambridge, Massachusetts. (This book contains a collection of papers that were also published in Energy and Buildings, Vol. 1, No. 3, April).

Sonderegger, R. 1977. Dynamic Models of House Heating Based on Equivalent Thermal Parameters. Ph.D. Thesis, Center for Energy and Environmental Studies, Report No. 57, Princeton University.

Sonderegger,  R.  C.  1978b. Diagnostic  tests  determining  the  thermal response of a house. ASHRAE Transactions 84(1):691-702.

Song, S. 2006. Development of New Methodologies for Evaluating the Energy Performance of New Commercial Buildings. Ph.D. Thesis, Departement of Architecture, Texas A&M University (August).

SRC Systems. 1996. Metrix: Utility Accounting System. Berkeley, CA (monthly accounting software with combined VBDD/multiple regression capabilities).

Stallard, G.S., Jonas, T.S. 1996. Power Plant Engineering: Combustion Processes. New York: Chapman & Hall.

Subbarao,  K.  1988. PSTAR-  Primary and  Secondary  Terms  Analysis  and Renormalization:  A  Unified Approach to Building  Energy  Simulations  and Short-term  Monitoring. Solar  Energy Research  Institute  -  Report  No. SERI/TR-254-3175.

Sreshthaputra, A., Haberl, J., Andrews, M. 2004. Improving building design and operation of a Thai Buddhist temple. Energy and Buildings 36:481-494.

Sreshthaputra, A., Haberl, J., Andrews, M.J. 2001. 3-D studies of heat transfer and air flow in an unconditioned Thai Buddhist temple. Journal of Energy, Heat and Mass Transfer 23:455–471.

Sung, Y. 2004. Development of a Comprehensive Community NOx Reduction Methodology. Ph.D., Thesis, Department of Architecture (August).

Stoecker, W. 1971. Proposed Procedures for Simulating the Performance of Components and Systems for Energy Calculations. 2nd Edition, American Society of Heating Refrigeration Air-conditioning Engineers, Atlanta, GA.

Subbarao, K., Burch, J., Hancock, C.E. 1990. How to accurately measure the load coefficient of a residential building. Journal of Solar Energy Engineering, in preparation.

Taylor,  J. 1981. An Introduction to Error Analysis. University Science Books,  Oxford University Press,  Mill Valley, CA,  ISBN 0-935702-07-5.

Thumann, A. 1988. Guide to Improving Efficiency of Combustion Systems. Lilburn, GA: The Fairmont Press.

Thamilseran, S., Haberl, J. 1995. A Bin Method for calculating energy conservation retrofits savings in commercial buildings. Proceedings of the 1995 ASME/JSME/JSES International Solar Energy Conference, Lahaina, Maui, Hawaii, pp. 111-124 (March).

Thamilseran, S. 1999. An Inverse Bin Methodology to Measure the Savings from Energy Conservation Retrofits in Commercial Buildings. Ph.D. Thesis, Mechanical Engineering Department, Texas A&M University (May).

Treado  S. J., and Bean, J. W. 1988. The Interaction of  Lighting,  Heating and  Cooling Systems in Buildings - Interim Report. National  Institute  of Standards and Technology, NISTIR 88-3860, December.

Treado,  S. J., 1988. Experimental Plan for Investigation of  Lighting  and HVAC  Interactions. National Institute of Standards and Technology,  NISTIR 87-3656, February.

Turner, D., Claridge, D., O’Neal, D., Haberl, J., Heffington, W., Taylor, D., Sifuentes, T. 2000. Program overview: The Texas LoanSTAR Program: 1989–1999, A 10-year experience. Proceedings of the 2000 ACEEE Summer Study on Energy Efficiency in Buildings, Vol. 4, pp. 4.365–4.376 (August).

Turner, W., D., Haberl, J., Bryant, J., Finstad, C., Robinson, J. 1992. Calibration facility for the LoanSTAR program. Proceedings of the 1992 ASME/JSES/KSES International Solar Energy Conference.

USDOE. 1985. Proceedings of the DOE/ORNL Data Acquisition Workshop. Oak Ridge National Laboratory, Oak Ridge, TN (October).

Wei, G. 1997. A Methodology for In-situ Calibration of Steam Boiler Instrumentation. MS Thesis, Mechanical Engineering Department, Texas A&M University, August.

Wise, J. A., Soulen, R. J.  1986.  Thermometer Calibration: A Model for State Calibration Laboratories. N.B.S. Monograph 174, January.

Wise, J. A.  1976.  Liquid-In-Glass Thermometry. N.B.S. Monograph 150, January.

Witte, L.C., Schmidt, P.S., Brown, D.R. 1988. Industrial Energy Management and Utilization. New York: Hemisphere Publishing Corporation.

Yuill, G.K., Haberl, J.S. 2002. Development of Accuracy Tests for Mechanical System Simulation. Final Report for ASHRAE Research Project 865-RP, The University of Nebraska at Lincoln (July).

Yuill, G., Haberl, J. 2006. Accuracy tests for simulations of VAV dual duct, single zone, four pipe fan coil and four pipe induction air handling systems  (4796),” ASHRAE Transactions-Research 112(1), (January).

Yuill, G., Haberl, J. 2005. Accuracy tests for simulations of constant volume, dual duct and variable volume air handling systems  (4796). ASHRAE Transactions-Research 111(2):137-153, (June). 

Chao, C.Y., Chan, G.Y., Ho, L.  2001. Feasibility study of an indoor air quality measurement protocol on 12 parameters in mechanically ventilated and air-conditioned buildings. Indoor and Built Environment 10:3-19.

U.S. Environmental Protection Agency. 2007. Indoor Air Quality Education and Assessment Model (IBEAM) http://www.epa.gov/iaq/largebldgs/ibeam_page.htm (accessed Aug. 3, 2007).

Bluyssen, P. M., De Oliveira Fernandes, E., Groes, L., Clausen, G., Fanger, P. O., Valbjørn, O., Bernhard, C. A., Roulet, C. A.  1996.  European indoor air quality audit project in 56 office buildings. Indoor Air 6(4):221–238.

Brohus, H., Frier, C., Heiselberg, P., Juhl Hendriksen, O.  2003. Measurements of hybrid ventilation performance in an office building. International Journal of Ventilation 1(4):77-88 (February).

Kirchner, S., Derangere, D., Riberon, J., Skoda-Schmoll, C., Aubree, D.  1997. A method for assessing indoor air quality in office buildings.  Buildings and the Environment: International Conference, Paris, France, September 9th 1997, pp. 325-331.

Roulet, C.A., Vandaele, L.  1991. Air flow patterns within buildings measurement techniques. AIVC Technical Note 34, Code TN 34, Air Infiltration and Ventilation Centre.

Fracastoro, G.V., Lyberg, M.D.  1983. Guiding Principles Concerning Design Experiments Instrumentation and Measuring Techniques in Residential Buildings. International Energy Agency, Annex 3.  Swedish Council for Building Research, Sweden, 300 pp.

Architecture 2030.  "The 2030 Challenge Benchmark Set."  http://www.architecture2030.org/news/targets.html (Accessed Aug. 5, 2007).

Chartered Institution of Building Services Engineers. 2003. The Energy Performance of Buildings Directive: A summary of its objectives and contents. CIBSE Briefing 6.  Chartered Institution of Building Services Engineers, London, UK.

American Society for Testing and Materials. 2005. Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air. ASTM Standard D4861-05. American Society for Testing and Materials, Conshohocken, PA.

American Society for Testing and Materials. 2005. Standard Test Method for Chlordane and Heptachlor Residues in Indoor Air. ASTM Standard D4947-05. American Society of Testing and Materials, Conshohocken, PA.

American Society for Testing and Materials. 2001. Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air. ASTM Standard D5075-01. American Society of Testing and Materials, Conshohocken, PA.

American Society for Testing and Materials. 2003. Standard Guide for Statistical Evaluation of Indoor Air Quality Models. ASTM Standard D5157-97(2003)e1. American Society of Testing and Materials, Conshohocken, PA.

American Society for Testing and Materials. 2003. Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology). ASTM Standard D5197-03. American Society of Testing and Materials, Conshohocken, PA.

American Society for Testing and Materials. 2005. Standard Practice for Collection of Floor Dust for Chemical Analysis. ASTM Standard D5438-05. American Society of Testing and Materials, Conshohocken, PA.

American Society of Testing and Materials. 2002. Standard Guide for Inspecting Water Systems for Legionellae and Investigating Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever). ASTM Standard D5952-02. American Society of Testing and Materials, Conshohocken, PA.

American Society of Testing and Materials. 2003. Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air. ASTM Standard D6196-03 American Society of Testing and Materials, Conshohocken, PA.

American Society of Testing and Materials.  2004. Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter. ASTM Standard D6327-98(2004).  American Society of Testing and Materials, Conshohocken, PA.

American Society of Testing and Materials. 2004. Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air. ASTM Standard D6345-98(2004)e1.  American Society of Testing and Materials, Conshohocken, PA.

American Society of Testing and Materials. 2005. Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors. ASTM Standard D6332-99(2005). American Society of Testing and Materials, Conshohocken, PA.

American Society of Testing and Materials.  2001. Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System. ASTM Standard F1471-93(2001). American Society of Testing and Materials, Conshohocken, PA.

American Society of Testing and Materials.  2005. Sampling strategy for nitrogen dioxide indoors. ASTM Draft Standard WK8826. American Society of Testing and Materials, Conshohocken, PA.

Hodgson, A.T., Levin, H.  2003. Volatile organic compounds in indoor air: A review of concentrations measured in north america since 1990. LBNL-51715.  Lawrence Berkeley National Laboratory, Berkeley, CA (April).

Hodgson, A.T., Levin, H.  2003. Classification of measured indoor volatile organic compounds based on noncancer health and comfort considerations. LBNL-53308. Lawrence Berkeley National Laboratory, Berkeley, CA.

ASHRAE.  2007.  Criteria for achieving acceptable indoor environments.  ASHRAE Guideline 10P.  Public Review Draft.  American Society for Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

Shulte, R., Bridges, B., Grimsrud, D.  2005. Continuous IAQ monitoring. ASHRAE Journal 47(5):38-46 (May).

Fisk, W.J., Faulkner, D.  1992. Air exchange effectiveness in office buildings: Measurement techniques and results. LBL-33103.  Presented at the International Symposium on Room Air Convection and Ventilation Effectiveness, University of Tokyo, July 22-24, 1992.

Alevantis, L.  2003. Building Materials Emissions Study. CIWMB Report #433-03-015. California Integrated Waste Management Board, Sacremento, CA, 319 pp. (November).

International Commission on Illumination. 1994. Guide to recommended practice of daylight measurement. CIE Publication No. 108-1994. International Commission on Illumination, Wien, Austria.

Fetters, J. 1997. The Handbook of Lighting Surveys & Audits. CRC Press, Boca Raton, FL, 176 pp.

Yocom, J.E. and S.M. McCarthy. 1996. Measuring Indoor Air Quality: A Practical Guide. West Sussex, England: John Wiley & Sons.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2007.  2007 ASHRAE Handbook - HVAC Applications, Chapter 40: Building Energy Monitoring.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2005.  2005 ASHRAE Handbook - Fundamentals, Chapter 14: Measurement and Instruments.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2005.  2005 ASHRAE Handbook - Fundamentals, Chapter 8:Thermal Comfort.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2005.  2005 ASHRAE Handbook - Fundamentals, Chapter 32: Energy Estimating and Modeling Methods.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

Etheridge, D. and M. Sandberg. 1996. Building Ventilation, Theory and Measurements.  John Wiley & Sons, Chichester.

Scientific Certification Systems.  2004. Environmental Certification Program, Indoor Air Quality Performance. SCS-EC10-2004.  Scientific Certification Systems, Emeryville, CA.

Energy Information Administration. 2003. 2003 Commercial Building Energy Consumption Survey. http://www.eia.doe.gov/emeu/cbecs/contents.html. (Accessed Aug. 7, 2007).

United States Environmental Protection Agency.  1990. Compendium of Methods for the Determination of Air Pollutants in Indoor Air. United States Environmental Protection Agency, Research Triangle Park, NC, EPA 600/4-90-010 (April).

American Society of Heating, Refrigerating, and Air-Conditioning Engineers.  2006.  Weather Data for Building Design Standards.  ANSI/ASHRAE Standard 169-2006.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

The California State University.  2007. Building Metering Guide. The California State University, Office of the Chancellor, Rev. 2007-05-22

British Standards Institution. 2006. Criteria for the indoor environment including thermal, indoor air quality, light and noise. prEN Standard 15251. British Standards Institution, London, UK. 

Hinge, A., Bertoldi, P., Waide, P.  2004. Comparing commercial building energy use around the world. Proceedings of 2004 American Council for an Energy-Efficient Economy Summer Study on Energy Efficieny in Buildings, August 22-27, 2004, Pacific Grove, CA, pp. 4-136 - 4-147.

Kissock, K., Haberl, J., Claridge, D.  2002. Development of a toolkit for calculating linear, change-point linear and multiple-linear inverse building energy analysis models:  ASHRAE research project 1050-RP, Final report. Report #ESL-TR-02-11-02, Energy Systems Laboratory, Texas A&M University, 180 pages, (November). 

Persily, A.K.  1999.  Myths about building envelopes. ASHRAE Journal 41:39-45 (March).

Emmerich, S.J., Persily, A.K.  2005. Airtightness of commercial buildings in the U.S.  Proceedings of 26th Air Infiltration and Ventilation Centre (AIVC) International Conference, September 21-23, 2005, Brussels, Belgium.

Verein Deutscher Ingenieure.  2007. Characteristic values of energy and water consumption in buildings:  Fundamentals. VDI 3807, Part 1, Verein Deutscher Ingenieure, Dusseldorf, Germany (March).

European Committee for Standardization. 2002. Heating systems in buildings - Method for calculation of the design heat load:  Annex A, basic parameters on human comfort in interior thermal environments - significance of operative temperature in heat load calculations. prEN Draft Standard 12831:2002 (E). European Committee for Standardization, Brussels, Belgium, pp. 35-37.

Olesen, B.W. 2006. Indoor environmental criteria for design and calculation of energy performance of buildings - EN15251. Paper presented at the EPIC 2006 AIVC Conference - Lyon (France) - 20-22 November 2006.

Chartered Institution of Building Services Engineers. 2006. Energy assessment and reporting method, 2nd edition. CIBSE TM22:2006. Chartered Institution of Building Services Engineers, London, UK.

American Society of Heating, Refrigerating, and Air-Conditioning Engineers. 2007. ASHRAE recommended procedure for measuring the HVAC system - induced noise in a room (Draft #10).  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society of Heating, Refrigerating, and Air-Conditioning Engineers. 2006. Proposed revision of Standard 105, standard methods of measuring, expressing and comparing building energy performance. ASHRAE Standard 105P. American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA (March).

Arens, E. 2007. Assessment of Indoor Environments. Proceedings, Roomvent 2007--10th International Conference on Air Distribution in Buildings, Helsinki, 13-15 June.

The European Parliament and the Council of the European Union.  2003.  DIRECTIVE 2002/91/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2002 on the energy performance of buildings.  EN L 1/65.  Official Journal of the European Communities, Brussels, Belgium (April).

European Committee for Standardization. 2007. Umbrella document, Version 8. prCEN/TR Draft Standard 15615. CEN/BT/TF 173 N 68 rev. Netherlands Normalisatie-instituut (March).

Chartered Institution of Building Services Engineers 2007. Inspection of Air Conditioning Systems. TM44:2007. Chartered Institution of Building Services Engineers, London, UK.

2001.  "Ordinance amending the drinking water ordinance as of 21 May 2001."  Ub.-Nr. 222/02.

The European Parliament and the Council of the European Union.  1998. DIRECTIVE 98/83/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 3 November 1998 on the quality of water intended for human consumption. EN L 330/32. Official Journal of the European Communities, Brussels, Belgium (May).

Verein Deutscher Ingenieure.  2002. Optimisation of daylighting and artificial lighting:  Fundamentals. VDI 6011, Part 1, Verein Deutscher Ingenieure, Dusseldorf, Germany (August).

Verein Deutscher Ingenieure.  2006. Optimization of daylighting and artificial lighting:  Rooflights. VDI 6011, Part 2, Verein Deutscher Ingenieure, Dusseldorf, Germany (April).

Verein Deutscher Ingenieure.  2006. Optimization of daylighting and artificial lighting:  Requirements for indoor greenery. VDI 6011, Part 3, Verein Deutscher Ingenieure, Dusseldorf, Germany (April).

European Committee for Standardization. 2007. List of mandated work items concerning the EPBD. CEN/BT/TF 173 N 100r. European Committee for Standardization, Brussels, Belgium (June).

Energy Management & Research Associates. 1994. Energy use and domestic hot water consumption: final report, phase 1. Energy Authority Report 94-19.  New York State Energy Research and Development Authority; Energy Management & Research Associates (November).

European Committee for Standardization. 2007. Energy performance of buildings - Overall energy use, CO2 emissions and definition of energy ratings, Pre FV version. prEN Draft Standard 15603:2007 (E). CEN/BT TF173.  European Committee for Standardization, Brussels, Belgium (April).

European Committee for Standardization. 2007. Energy performance of buildings - Methods of expressing energy performance and for energy certification of buildings, Final draft. prEN Draft Standard 15217:2007 (E). ICS 91.140.10.  European Committee for Standardization, Brussels, Belgium (February).

European Committee for Standardization. 2006. Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems, Final draft. prEN Standard 13779:2006 (E). ICS 91.140.30. European Committee for Standardization, Brussels, Belgium (November).

US Environmental Protection Agency.  2006.  Professional Engineer's Guide to the ENERGY STAR Label for Buildings.  EPA-430-F-01-XX.  United States Environmental Protection Agency, Research Triangle Park, NC, 30 pp (November).

Liptak, B. (ed.).  2003.  Instrument Engineers' Handbook, 4th ed., Vol. 1: Process measurement and analysis.  Chilton Book Company, Radnor, PA.  ISBN 0-8493-1083-0.

Chartered Institution of Building Services Engineers. 2004. CIBSE Guide F: Energy efficiency in buildings, 2nd ed. Chartered Institution of Building Services Engineers, London, UK.

Chartered Institution of Building Services Engineers. 2006. Energy metering. TM39:2006. Chartered Institution of Building Services Engineers, London, UK.

Wolf, S., Gall, D.  "Luminance analysers - What they are and how do they work."

LightLab International.  "The unified glare rating system UGR as a productivity tool."  Lab Notes, Issue 2.

Judson, S., Deb, A., Englander, S.  1994. Using impact evaluation results to improve engineering estimates: Completing the circle. New England Electric System,

European Committee for Standardization. 2001. Ventilation for buildings - Design criteria for the indoor envronment. CR Standard 1752:2001. European Committee for Standardization, Brussels, Belgium.

European Committee for Standardization. 2000. Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems. EN Standard 12599:2000. European Committee for Standardization, Brussels, Belgium.

International Organization for Standardization.  2003.  Ergonomics of the thermal environment - Instruments for measuring physical quantities.  ISO Standard 7726:2003.  International Organization for Standardization, Geneva, Switzerland.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  1991.  Method of Testing for Rating the Performance of Room Air Outlets and Inlets.  ANSI/ASHRAE Standard 70-1991.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  1990.  Method of Testing for Room Air Diffusion.  ANSI/ASHRAE Standard 130-1990.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  1997.  ASHRAE Thermal Comfort Tool CD.  ISBN 1-883413-55-9.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

International Organization for Standardization.  2004.  Ergonomics - Determination of metabolic heat production.  ISO Standard 8896:2004.  International Organization for Standardization, Geneva, Switzerland.

International Organization for Standardization.  2004.  Ergonomics of the thermal environment - Estimation of the thermal insulation and evaporative resistance of a clothing ensemble.  ISO Standard 9920:2004.  International Organization for Standardization, Geneva, Switzerland.

International Organization for Standardization.  2005.  Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort.  ISO Standard 7730:2005.  International Organization for Standardization, Geneva, Switzerland.

Acoustical Society of America.  2002.  Specifications for Integrating-Averaging Sound Level Meters.  ANSI/ASA Standard S1.43-1997 (R2002).  Acoustical Society of America, Melville, NY. 

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2005.  Engineering Analysis of Experimental Data.  ANSI/ASHRAE Guideline 2-2005.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2007.  2007 ASHRAE Handbook - HVAC Applications, Chapter 47: Sound and Vibration Control.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

European Committee for Standardization. 2002. Light and lighting - lighting of workplaces - part 1: Indoor work places. EN Standard 12464:2002. European Committee for Standardization, Brussels, Belgium.

European Committee for Standardization. 2004. Light and lighting - Measurement and presentation of photometric data of lamps and luminaires. EN Standard 13032:2004. European Committee for Standardization, Brussels, Belgium.

Deutsches Institut für Normung. 1999. Photometry - part 1: Methods of measurement. DIN Standard 5032-1. Deutsches Institut für Normung, Berlin, Germany.

International Commission on Illumination. 1987. Methods of characterizing illuminance meters and luminance meters. CIE Publication No. 69-1987. International Commission on Illumination, Wien, Austria.

Illuminating Engineering Society of North America. 1991. Computing visual comfort ratings for interior lighting. IES LM-42-1991. Illuminating Engineeting Society of North America, New York, NY. 

Akashi, Y., Muramatsu, R., and S. Kanaya. 1996. Unified Glare Rating (UGR) and subjective appraisal of discomfort glare. Lighting Research and Technology 10(2):94-105.

International Commission on Illumination. 1995. Discomfort glare in interior lighting. CIE Publication No. 117-1995. International Commission on Illumination, Wien, Austria.

U.S. Environmental Protection Agency. 1996. Air quality criteria for particulate matter. Office of Research and Development. http://www.epa.gov/NCEA/pdfs/partmatt/April1996/0671vlfm.pdf.

American Conference of Governmental Industrial Hygienists. 1989. Guidelines for the assessment of bioaerosols in the indoor environment. American Conference of Governmental Industrial Hygienists, Cincinnati, OH.

American Conference of Governmental Industrial Hygienists. 2007. TLVs® and BEIs®: Threshold limit values for chemical substances and physical agents. American Conference of Governmental Industrial Hygienists, Cincinnati, OH.

American Conference of Governmental Industrial Hygienists. 2001. Air sampling instruments, 9th ed. American Conference of Governmental Industrial Hygienists, Cincinnati, OH.

American Industrial Hygiene Association. 1996. Field guide for the determination of biological contaminants in environmental samples. American Industrial Hygiene Association, Fairfax, VA.

U.S. Green Building Council. 2005. LEED-EB: Reference Guide, Version 2.0, 1st ed. U.S. Green Building Council, Washington D.C. (June).

U.S. Green Building Council. 2005. LEED-NC: Reference Guide, Version 2.2, 1st ed. U.S. Green Building Council, Washington D.C. (October).

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2005.  2005 ASHRAE Handbook - HVAC Fundamentals, Chapter 12: Air Contaminants.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Heating, Refrigerating, and Air-Conditioning Engineers.  2005.  2005 ASHRAE Handbook - HVAC Fundamentals, Chapter 27: Ventilation and Infiltration.  American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.

American Society for Testing and Materials.  1993.  Test methods for determining air change in a single zone by means of a tracer gas dilution.  ASTM Standard E741-93. American Society for Testing and Materials, Conshohocken, PA.