Since Kerberos negotiates authenticated, and optionally encrypted, communications between two points anywhere on the internet, it provides a layer of security that is not dependent on which side of a firewall either client is on. Since studies have shown that half of the computer security breaches in industry happen from inside firewalls, Kerberos V5 from MIT will play a vital role in the security of your network.
This document is one piece of the document set for Kerberos V5. The documents, and their intended audiences, are:
The next chapter describes how Kerberos works.
Chapter three describes administration of the principals in the Kerberos database.
Chapter four describes how you can use DNS in configuring your Kerberos realm.
Chapter five describes administrative programs for manipulating the Kerberos database as a whole.
Chapter six describes OpenLDAP Configuration steps.
Chapter seven describes issues to consider when adding an application server to the database.
Chapter eight describes our problem reporting system.
The appendices include the list of Kerberos error messages, and a
complete list of the time zones understood by kadmin.
This section provides a simplified description of a general user's
interaction with the Kerberos system. This interaction happens
transparently—users don't need to know and probably don't care about
what's going on—but Kerberos administrators might find a schematic
description of the process useful. This description glosses over a lot
of details; for more information, see Kerberos: An Authentication
Service for Open Network Systems, a paper presented at Winter USENIX
1988, in Dallas, Texas. This paper can be retreived by FTP from
athena-dist.mit.edu, in the location:
/pub/ATHENA/kerberos/doc/usenix.PS.
In an environment that provides network services, you use client programs to request services from server programs that are somewhere on the network. Suppose you have logged in to a workstation and you want to ‘rlogin’ to a typical UNIX host. You use the local ‘rlogin’ client program to contact the remote machine's ‘rlogind’ daemon.
Under Kerberos, the ‘klogind’ daemon allows you to login to a remote machine if you can provide ‘klogind’ a Kerberos ticket which proves your identity. In addition to the ticket, you must also have possession of the corresponding ticket session key. The combination of a ticket and the ticket's session key is known as a credential.
Typically, a client program automatically obtains credentials identifying the person using the client program. The credentials are obtained from a Kerberos server that resides somewhere on the network. A Kerberos server maintains a database of user, server, and password information.
Kerberos will give you credentials only if you have an entry in the Kerberos server's Kerberos database. Your database entry includes your Kerberos principal (an identifying string, which is often just your username), and your Kerberos password. Every Kerberos user must have an entry in this database.
Each administrative domain will have its own Kerberos database, which contains information about the users and services for that particular site or administrative domain. This administrative domain is the Kerberos realm.
Each Kerberos realm will have at least one Kerberos server, where the master Kerberos database for that site or administrative domain is stored. A Kerberos realm may also have one or more slave servers, which have read-only copies of the Kerberos database that are periodically propagated from the master server. For more details on how this is done, see the “Set Up the Slave KDCs for Database Propagation” and “Propagate the Database to Each Slave KDC” sections of the Kerberos V5 Installation Guide.
The ‘kinit’ command prompts for your password. If you enter it successfully, you will obtain a ticket-granting ticket and a ticket session key which gives you the right to use the ticket. This combination of the ticket and its associated key is known as your credentials. As illustrated below, client programs use your ticket-granting ticket credentials in order to obtain client-specific credentials as needed.
Your credentials are stored in a credentials cache, which is often
just a file in /tmp. The credentials cache is also called the
ticket file, especially in Kerberos V4 documentation. Note,
however, that a credentials cache does not have to be stored in a file.
The master database also contains entries for all network services that require Kerberos authentication. Suppose that your site has a machine, ‘laughter.mit.edu’, that requires Kerberos authentication from anyone who wants to ‘rlogin’ to it. The host's Kerberos realm is ‘ATHENA.MIT.EDU’.
This service must be registered in the Kerberos database, using the proper service name, which in this case is the principal:
host/laughter.mit.edu@ATHENA.MIT.EDU
The ‘/’ character separates the Kerberos primary (in this case, ‘host’) from the instance (in this case, ‘laughter.mit.edu’); the ‘@’ character separates the realm name (in this case, ‘ATHENA.MIT.EDU’) from the rest of the principal. The primary, ‘host’, denotes the name or type of the service that is being offered: generic host-level access to the machine. The instance, ‘laughter.mit.edu’, names the specific machine that is offering this service. There will generally be many different machines, each offering one particular type of service, and the instance serves to give each one of these servers a different Kerberos principal.
For each service, there must also be a service key known only by Kerberos and the service. On the Kerberos server, the service key is stored in the Kerberos database.
On the server host, these service keys are stored in key tables,
which are files known as keytabs.1 For example, the service keys used by
services that run as root are usually stored in the keytab file
/etc/krb5.keytab. N.B.: This service key is the equivalent
of the service's password, and must be kept secure. Data which is meant
to be read only by the service is encrypted using this key.
Suppose that you walk up to a host intending to login to it, and then ‘rlogin’ to the machine ‘laughter’. Here's what happens:
host% rlogin laughter
klogind will let you
login.
Following are definitions of some of the Kerberos terminology.
The typical format of a typical Kerberos principal is
primary/instance@REALM.
telnet and
rsh), “ftp” (FTP), “krbtgt” (authentication;
cf. ticket-granting ticket), and “pop” (email).
Any tag in the configuration files which requires a list of encryption types can be set to some combination of the following strings. Encryption types marked as “weak” are available for compatibility but not recommended for use.
des-cbc-crcdes-cbc-md4des-cbc-md5des-cbc-rawdes3-cbc-rawdes3-cbc-sha1des3-hmac-sha1des3-cbc-sha1-kddes-hmac-sha1aes256-cts-hmac-sha1-96aes256-ctsaes128-cts-hmac-sha1-96aes128-ctsarcfour-hmacrc4-hmacarcfour-hmac-md5arcfour-hmac-exprc4-hmac-exparcfour-hmac-md5-expdesdes3aesrc4The string DEFAULT can be used to refer to the default set of types for the variable in question. Types or families can be removed from the current list by prefixing them with a minus sign (“-”). Types or families can be prefixed with a plus sign (“+”) for symmetry; it has the same meaning as just listing the type or family. For example, “DEFAULT -des” would be the default set of encryption types with DES types removed, and “des3 DEFAULT” would be the default set of encryption types with triple DES types moved to the front.
While aes128-cts and aes256-cts are supported for all Kerberos operations, they are not supported by older versions of our GSSAPI implementation (krb5-1.3.1 and earlier).
By default, AES is enabled in this release. Sites wishing to use AES encryption types on their KDCs need to be careful not to give GSSAPI services AES keys if the servers have not been updated. If older GSSAPI services are given AES keys, then services may fail when clients supporting AES for GSSAPI are used. Sites may wish to use AES for user keys and for the ticket granting ticket key, although doing so requires specifying what encryption types are used as each principal is created.
If all GSSAPI-based services have been updated before or with the KDC, this is not an issue.
Your Kerberos key is derived from your password. To ensure that people who happen to pick the same password do not have the same key, Kerberos 5 incorporates more information into the key using something called a salt. The supported values for salts are as follows.
normalv4norealmonlyrealmafs3specialThe krb5.conf file contains Kerberos configuration information,
including the locations of KDCs and admin servers for the Kerberos
realms of interest, defaults for the current realm and for Kerberos
applications, and mappings of hostnames onto Kerberos realms. Normally,
you should install your krb5.conf file in the directory
/etc. You can override the default location by setting the
environment variable ‘KRB5_CONFIG’.
The krb5.conf file is set up in the style of a Windows INI file.
Sections are headed by the section name, in square brackets. Each
section may contain zero or more relations, of the form:
foo = bar
or
fubar = {
foo = bar
baz = quux
}
Placing a `*' at the end of a line indicates that this is the final value for the tag. This means that neither the remainder of this configuration file nor any other configuration file will be checked for any other values for this tag.
For example, if you have the following lines:
foo = bar*
foo = baz
then the second value of foo (baz) would never be read.
The krb5.conf file can include other files using either of the
following directives at the beginning of a line:
include FILENAME
includedir DIRNAME
FILENAME or DIRNAME should be an absolute path. The named file or directory must exist and be readable. Including a directory includes all files within the directory whose names consist solely of alphanumeric characters, dashes, or underscores. Included profile files are syntactically independent of their parents, so each included file must begin with a section header.
The krb5.conf file may contain any or all of the following
sections:
The libdefaults section may contain any of the following
relations:
.k5login. For security reasons,
k5login files must be owned by the local user or by root.
Enabling this option does open up a type of denial-of-service attack, if someone spoofs the DNS records and redirects you to another server. However, it's no worse than a denial of service, because that fake KDC will be unable to decode anything you send it (besides the initial ticket request, which has no encrypted data), and anything the fake KDC sends will not be trusted without verification using some secret that it won't know.
If this option is not specified but ‘dns_fallback’ is, that value will be used instead. If neither option is specified, the behavior depends on configure-time options; if none were given, the default is to enable this option. If the DNS support is not compiled in, this entry has no effect.
Enabling this option may permit a redirection attack, where spoofed DNS replies persuade a client to authenticate to the wrong realm, when talking to the wrong host (either by spoofing yet more DNS records or by intercepting the net traffic). Depending on how the client software manages hostnames, however, it could already be vulnerable to such attacks. We are looking at possible ways to minimize or eliminate this exposure. For now, we encourage more adventurous sites to try using Secure DNS.
If this option is not specified but ‘dns_fallback’ is, that value will be used instead. If neither option is specified, the behavior depends on configure-time options; if none were given, the default is to disable this option. If the DNS support is not compiled in, this entry has no effect.
udp_preference_list.
If the message is smaller than udp_preference_list, then UDP
will be tried before TCP. Regardless of the size, both protocols will
be tried if the first attempt fails.
Each tag in the [appdefaults] section names a Kerberos V5 application or an option that is used by some Kerberos V5 application[s]. The value of the tag defines the default behaviors for that application.
For example:
[appdefaults]
telnet = {
ATHENA.MIT.EDU = {
option1 = false
}
}
telnet = {
option1 = true
option2 = true
}
ATHENA.MIT.EDU = {
option2 = false
}
option2 = true
The above four ways of specifying the value of an option are shown in order of decreasing precedence. In this example, if telnet is running in the realm EXAMPLE.COM, it should, by default, have option1 and option2 set to true. However, a telnet program in the realm ATHENA.MIT.EDU should have option1 set to false and option2 set to true. Any other programs in ATHENA.MIT.EDU should have option2 set to false by default. Any programs running in other realms should have option2 set to true.
The list of specifiable options for each application may be found in that application's man pages. The application defaults specified here are overridden by those specified in the [realms] section.
Each tag in the [login] section of the file is an option for login.krb5. This section may contain any of the following relations:
Each tag in the [realms] section of the file is the name of a Kerberos realm. The value of the tag is a subsection with relations that define the properties of that particular realm. For each realm, the following tags may be specified in the realm's subsection:
The format for exp is
[n:string](regexp)s/pattern/replacement/g.
The integer n indicates how many components the target principal
should have. If this matches, then a string will be formed from
string, substituting the realm of the principal for $0 and
the n'th component of the principal for $n (e.g. if the
principal was johndoe/admin then [2:$2$1foo] would result in
the string "adminjohndoefoo"). If this string matches
regexp, then the s//[g] substitution command will be run over
the string. The optional g will cause the substitution to be global
over the string, instead of replacing only the first match in the
string.
For example:
[realms]
ATHENA.MIT.EDU = {
auth_to_local = RULE:[2:$1](johndoe)s/^.*$/guest/
auth_to_local = RULE:[2:$1;$2](^.*;admin$)s/;admin$//
auth_to_local = RULE:[2:$2](^.*;root)s/^.*$/root/
auto_to_local = DEFAULT
}
would result in any principal without root or admin as
the second component to be translated with the default rule. A
principal with a second component of admin will become its first
component. root will be used as the local name for any
principal with a second component of root. The exception to
these two rules are any principals johndoe/*, which will
always get the local name guest.
The [domain_realm] section provides a translation from a domain name or hostname to a Kerberos realm name. The tag name can be a host name, or a domain name, where domain names are indicated by a prefix of a period (‘.’). The value of the relation is the Kerberos realm name for that particular host or domain. Host names and domain names should be in lower case.
If no translation entry applies, the host's realm is considered to be the hostname's domain portion converted to upper case. For example, the following [domain_realm] section:
[domain_realm]
.mit.edu = ATHENA.MIT.EDU
mit.edu = ATHENA.MIT.EDU
crash.mit.edu = TEST.ATHENA.MIT.EDU
example.com = EXAMPLE.COM
maps crash.mit.edu into the TEST.ATHENA.MIT.EDU realm. All other hosts in the mit.edu domain will map by default to the ATHENA.MIT.EDU realm, and all hosts in the example.com domain will map by default into the EXAMPLE.COM realm. Note the entries for the hosts mit.edu and example.com. Without these entries, these hosts would be mapped into the Kerberos realms ‘EDU’ and ‘ORG’, respectively.
The [logging] section indicates how a particular entity is to perform its logging. The relations in this section assign one or more values to the entity name. Currently, the following entities are used:
Values are of the following forms:
The severity argument specifies the default severity of system log
messages. This may be any of the following severities supported by the
syslog(3) call, minus the LOG_ prefix: LOG_EMERG, LOG_ALERT,
LOG_CRIT, LOG_ERR, LOG_WARNING, LOG_NOTICE, LOG_INFO, and LOG_DEBUG.
For example, a value of ‘CRIT’ would specify LOG_CRIT severity.
The facility argument specifies the facility under which the messages are logged. This may be any of the following facilities supported by the syslog(3) call minus the LOG_ prefix: LOG_KERN, LOG_USER, LOG_MAIL, LOG_DAEMON, LOG_AUTH, LOG_LPR, LOG_NEWS, LOG_UUCP, LOG_CRON, and LOG_LOCAL0 through LOG_LOCAL7.
If no severity is specified, the default is ERR. If no facility is specified, the default is AUTH.
In the following example, the logging messages from the KDC will go to the console and to the system log under the facility LOG_DAEMON with default severity of LOG_INFO; and the logging messages from the administrative server will be appended to the file /var/adm/kadmin.log and sent to the device /dev/tty04.
[logging]
kdc = CONSOLE
kdc = SYSLOG:INFO:DAEMON
admin_server = FILE:/var/adm/kadmin.log
admin_server = DEVICE=/dev/tty04
In order to perform direct (non-hierarchical) cross-realm authentication, a database is needed to construct the authentication paths between the realms. This section defines that database.
A client will use this section to find the authentication path between its realm and the realm of the server. The server will use this section to verify the authentication path used by the client, by checking the transited field of the received ticket.
There is a tag for each participating realm, and each tag has subtags for each of the realms. The value of the subtags is an intermediate realm which may participate in the cross-realm authentication. The subtags may be repeated if there is more then one intermediate realm. A value of "." means that the two realms share keys directly, and no intermediate realms should be allowed to participate.
There are n**2 possible entries in this table, but only those entries which will be needed on the client or the server need to be present. The client needs a tag for its local realm, with subtags for all the realms of servers it will need to authenticate with. A server needs a tag for each realm of the clients it will serve.
For example, ANL.GOV, PNL.GOV, and NERSC.GOV all wish to use the ES.NET realm as an intermediate realm. ANL has a sub realm of TEST.ANL.GOV which will authenticate with NERSC.GOV but not PNL.GOV. The [capaths] section for ANL.GOV systems would look like this:
[capaths]
ANL.GOV = {
TEST.ANL.GOV = .
PNL.GOV = ES.NET
NERSC.GOV = ES.NET
ES.NET = .
}
TEST.ANL.GOV = {
ANL.GOV = .
}
PNL.GOV = {
ANL.GOV = ES.NET
}
NERSC.GOV = {
ANL.GOV = ES.NET
}
ES.NET = {
ANL.GOV = .
}
The [capaths] section of the configuration file used on NERSC.GOV systems would look like this:
[capaths]
NERSC.GOV = {
ANL.GOV = ES.NET
TEST.ANL.GOV = ES.NET
TEST.ANL.GOV = ANL.GOV
PNL.GOV = ES.NET
ES.NET = .
}
ANL.GOV = {
NERSC.GOV = ES.NET
}
PNL.GOV = {
NERSC.GOV = ES.NET
}
ES.NET = {
NERSC.GOV = .
}
TEST.ANL.GOV = {
NERSC.GOV = ANL.GOV
NERSC.GOV = ES.NET
}
In the above examples, the ordering is not important, except when the same subtag name is used more then once. The client will use this to determine the path. (It is not important to the server, since the transited field is not sorted.)
This feature is not currently supported by DCE. DCE security servers can be used with Kerberized clients and servers, but versions prior to DCE 1.1 did not fill in the transited field, and should be used with caution.
The [dbdefaults] section provides default values for the database specific parameters. It can also specify the configuration section under [dbmodules] section for database specific parameters used by the database library.(see dbmodules).
The following tags are used in this section:
kdb5_ldap_util stashsrvpw) for the objects used by the Kerberos servers to bind to the LDAP server. This file must be kept secure. This value is used if no service password file is mentioned in the configuration section under [dbmodules].
Contains database specific parameters used by the database library. Each tag in the [dbmodules] section of the file names a configuration section for database specific parameters that can be referred to by a realm. The value of the tag is a subsection where the relations in that subsection define the database specific parameters.
For each section, the following tags may be specified in the subsection:
/usr/local/var/krb5kdc/principal.
true, suppresses KDC updates to the “Last successful
authentication” field of principal entries requiring preauthentication.
Setting this flag may improve performance. (Principal entries which do
not require preauthentication never update the “Last successful
authentication” field.)
true, suppresses KDC updates to the “Last failed
authentication” and “Failed password attempts” fields of principal
entries requiring preauthentication. Setting this flag may improve
performance, but also disables account lockout.
kdb5_ldap_util stashsrvpw) for the objects used by the Kerberos servers to bind to the LDAP server. This file must be kept secure.
Tags in the [plugins] section can be used to register dynamic plugin modules and to turn modules on and off. Not every krb5 pluggable interface uses the [plugins] section; the ones that do are documented here.
Each pluggable interface corresponds to a subsection of [plugins]. All subsections support the same tags:
The following subsections are currently supported within the [plugins] section:
The pwqual subsection controls modules for the password quality interface, which is used to reject weak passwords when passwords are changed. In addition to any registered dynamic modules, the following built-in modules exist (and may be disabled with the disable tag):
The kadm5_hook interface provides plugins with information on principal creation, modification, password changes and deletion. This interface can be used to write a plugin to synchronize MIT Kerberos with another database such as Active Directory. No plugins are built in for this interface.
The clpreauth and kdcpreauth interfaces allow plugin modules to provide client and KDC preauthentication mechanisms. The following built-in modules exist:
The following are pkinit-specific options.
Note that these values may be specified in [libdefaults]
as global defaults,
or within a realm-specific subsection of [libdefaults],
or may be specified as realm-specific values in the
[realms] section.
Also note that a realm-specific value over-rides, does not add to,
a generic [libdefaults] specification.
The search order is:
[libdefaults]
[libdefaults]
EXAMPLE.COM = {
pkinit_anchors = FILE:/usr/local/example.com.crt
}
[realms] section,
[realms]
OTHERREALM.ORG = {
pkinit_anchors = FILE:/usr/local/otherrealm.org.crt
}
[libdefaults] section.
[libdefaults]
pkinit_anchors = DIR:/usr/local/generic_trusted_cas/
The syntax for specifying Public Key identity, trust, and revocation information for pkinit is as follows:
*.crt and *.key, where the first part of the
file name is the same for matching pairs of certificate and
private key files. When a file with a name ending with .crt
is found, a matching file ending with .key is assumed
to contain the private key. If no such file is found, then
the certificate in the .crt is not used.
PKCS #12 format file, containing
the user's certificate and private key.
PKCS #11. If a value is encountered with no keyword, it
is assumed to be the module-name. If no module-name is
specified, the default is opensc-pkcs11.so.
slotid= and/or token= may be specified to force the use of a
particular smard card reader or token if there is more than one
available.
certid= and/or certlabel= may be specified to force the selection
of a particular certificate on the device. See the pkinit_cert_match
configuration option for more ways to select a particular certificate to
use for pkinit.
ENV:X509_PROXY, where environment
variable X509_PROXY has been set to FILE:/tmp/my_proxy.pem.
pkinit_require_crl_checking is false,
then verification succeeds.
However, if pkinit_require_crl_checking is true and
there is no CRL information available for the issuing CA,
then verification fails.
pkinit_require_crl_checking should be set to true
if the policy is such that up-to-date CRLs must be present for
every CA.
krb5.conf file are:
kpServerAuth is specified, a KDC certificate with the
id-kp-serverAuth EKU as used by Microsoft will be accepted.
none is specified, then the KDC certificate will not be
checked to verify it has an acceptable EKU. The use of this option
is not recommended.
The Subject and Issuer comparison strings are the RFC2253 string representations from the certificate Subject DN and Issuer DN values.
The syntax of the matching rules is:
[relation-operator]component-rule ...
where
&&, meaning all component rules must match,
or ||, meaning only one component rule must match.
The default is && if not specified.
<SUBJECT>regular-expression<ISSUER>regular-expression<SAN>regular-expression<EKU>extended-key-usage-listpkinitmsScLoginclientAuthemailProtection
<KU>key-usage-listdigitalSignaturekeyEncipherment
pkinit_cert_match = ||<SUBJECT>.*DoE.*<SAN>.*@EXAMPLE.COM
pkinit_cert_match = &&<EKU>msScLogin,clientAuth<ISSUER>.*DoE.*
pkinit_cert_match = <EKU>msScLogin,clientAuth<KU>digitalSignature
Here is an example of a generic krb5.conf file:
[libdefaults]
default_realm = ATHENA.MIT.EDU
default_tkt_enctypes = des3-hmac-sha1 des-cbc-crc
default_tgs_enctypes = des3-hmac-sha1 des-cbc-crc
dns_lookup_kdc = true
dns_lookup_realm = false
[realms]
ATHENA.MIT.EDU = {
kdc = kerberos.mit.edu
kdc = kerberos-1.mit.edu
kdc = kerberos-2.mit.edu:750
admin_server = kerberos.mit.edu
master_kdc = kerberos.mit.edu
default_domain = mit.edu
}
EXAMPLE.COM = {
kdc = kerberos.example.com
kdc = kerberos-1.example.com
admin_server = kerberos.example.com
}
OPENLDAP.MIT.EDU = {
kdc = kerberos.mit.edu
admin_server = kerberos.mit.edu
database_module = openldap_ldapconf
}
[domain_realm]
.mit.edu = ATHENA.MIT.EDU
mit.edu = ATHENA.MIT.EDU
[capaths]
ATHENA.MIT.EDU = {
EXAMPLE.COM = .
}
EXAMPLE.COM = {
ATHENA.MIT.EDU = .
}
[logging]
kdc = SYSLOG:INFO
admin_server = FILE=/var/kadm5.log
[dbdefaults]
ldap_kerberos_container_dn = cn=krbcontainer,dc=example,dc=com
[dbmodules]
openldap_ldapconf = {
db_library = kldap
ldap_kerberos_container_dn = cn=krbcontainer,dc=example,dc=com
ldap_kdc_dn = "cn=krbadmin,dc=example,dc=com"
# this object needs to have read rights on
# the realm container and principal subtrees
ldap_kadmind_dn = "cn=krbadmin,dc=example,dc=com"
# this object needs to have read and write rights on
# the realm container and principal subtrees
ldap_service_password_file = /etc/kerberos/service.keyfile
ldap_servers = ldaps://kerberos.mit.edu
ldap_conns_per_server = 5
}
The kdc.conf file contains KDC configuration information,
including defaults used when issuing Kerberos tickets. Normally, you
should install your kdc.conf file in the directory
/usr/local/var/krb5kdc. You can override the default
location by setting the environment variable ‘KRB5_KDC_PROFILE’.
The kdc.conf file is set up in the same format as the
krb5.conf file. (See krb5.conf.) The kdc.conf file
may contain any or all of the following three sections:
The following relation is defined in the [kdcdefaults] section:
If you wish to change this (which we do not recommend, because the current implementation has little protection against denial-of-service attacks), the standard port number assigned for Kerberos TCP traffic is port 88.
false.
Each tag in the [realms] section of the file names a Kerberos realm. The value of the tag is a subsection where the relations in that subsection define KDC parameters for that particular realm.
For each realm, the following tags may be specified in the [realms] subsection:
/usr/local/var/krb5kdc/kadm5.acl.
kadmind4 and v5passwdd use to authenticate to
the database. The default is /usr/local/var/krb5kdc/kadm5.keytab.
There are a number of possible flags:
kdb5_util stash). The default is
/usr/local/var/krb5kdc/.k5.REALM, where REALM is the
Kerberos realm.
kadmin
will have keys of these types. The default value for this tag is
aes256-cts-hmac-sha1-96:normal aes128-cts-hmac-sha1-96:normal des3-cbc-sha1:normal arcfour-hmac-md5:normal. For lists of possible values, see
Supported Encryption Types and Salts.
true, false). If set to true, the
KDC will check the list of transited realms for cross-realm tickets
against the transit path computed from the realm names and the
capaths section of its krb5.conf file; if the path in the
ticket to be issued contains any realms not in the computed path, the
ticket will not be issued, and an error will be returned to the client
instead. If this value is set to false, such tickets will be
issued anyways, and it will be left up to the application server to
validate the realm transit path.
If the disable-transited-check flag is set in the incoming
request, this check is not performed at all. Having the
reject_bad_transit option will cause such ticket requests to be
rejected always.
This transit path checking and config file option currently apply only to TGS requests.
Earlier versions of the MIT release (before 1.2.3) had bugs in the application server support such that the server-side checks may not be performed correctly. We recommend turning this option on, unless you know that all application servers in this realm have been updated to fixed versions of the software, and for whatever reason, you don't want the KDC to do the validation.
This is a per-realm option so that multiple-realm KDCs may control it separately for each realm, in case (for example) one realm has had the software on its application servers updated but another has not.
This option defaults to true.
true, false). If set to true, the
KDC will reject ticket requests from anonymous principals to service
principals other than the realm's ticket-granting service. This option
allows anonymous PKINIT to be enabled for use as FAST armor tickets
without allowing anonymous authentication to services. By default, the
value of restrict_anonymous_to_tgt as specified in the [kdcdefaults]
section is used.
The following are pkinit-specific options.
Note that these values may be specified in [kdcdefaults]
as global defaults,
or within a realm-specific subsection of [realms].
Also note that a realm-specific value over-rides, does not add to,
a generic [kdcdefaults] specification.
The search order is:
[realms]
[realms]
EXAMPLE.COM = {
pkinit_anchors = FILE:/usr/local/example.com.crt
}
[kdcdefaults] section.
[kdcdefaults]
pkinit_anchors = DIR:/usr/local/generic_trusted_cas/
For information about the syntax of some of these options, see See pkinit identity syntax.
pkinit_require_crl_checking is false,
then verification succeeds.
However, if pkinit_require_crl_checking is true and
there is no CRL information available for the issuing CA,
then verification fails.
pkinit_require_crl_checking should be set to true
if the policy is such that up-to-date CRLs must be present for
every CA.
The default is false.
Without this option, the KDC will only
accept certificates with the id-pkinit-san as defined in RFC4556.
There is currently no option to disable SAN checking in the KDC.
kdc.conf file are:
scLogin is specified, client certificates with the
Microsoft Smart Card Login EKU (id-ms-kp-sc-logon) will be accepted.
none is specified, then client certificates will not be
checked to verify they have an acceptable EKU.
The use of this option is not recommended.
Here's an example of a kdc.conf file:
[kdcdefaults]
kdc_ports = 88
[realms]
ATHENA.MIT.EDU = {
kadmind_port = 749
max_life = 12h 0m 0s
max_renewable_life = 7d 0h 0m 0s
master_key_type = des3-hmac-sha1
supported_enctypes = des3-hmac-sha1:normal des-cbc-crc:normal des-cbc-crc:v4
}
[logging]
kdc = FILE:/usr/local/var/krb5kdc/kdc.log
admin_server = FILE:/usr/local/var/krb5kdc/kadmin.log
Mapping hostnames onto Kerberos realms is done in one of two ways.
The first mechanism, which has been in use for years in MIT-based
Kerberos distributions, works through a set of rules in
the krb5.conf configuration file. (See krb5.conf.) You can
specify mappings for an entire domain or subdomain, and/or on a
hostname-by-hostname basis. Since greater specificity takes precedence,
you would do this by specifying the mappings for a given domain or
subdomain and listing the exceptions.
The second mechanism works by looking up the information in special
TXT records in the Domain Name Service. This is currently not
used by default because security holes could result if the DNS TXT
records were spoofed. If this mechanism is enabled on the client,
it will try to look up a TXT record for the DNS name formed by
putting the prefix _kerberos in front of the hostname in question.
If that record is not found, it will try using _kerberos and the
host's domain name, then its parent domain, and so forth. So for the
hostname BOSTON.ENGINEERING.FOOBAR.COM, the names looked up would be:
_kerberos.boston.engineering.foobar.com
_kerberos.engineering.foobar.com
_kerberos.foobar.com
_kerberos.com
The value of the first TXT record found is taken as the realm name. (Obviously, this doesn't work all that well if a host and a subdomain have the same name, and different realms. For example, if all the hosts in the ENGINEERING.FOOBAR.COM domain are in the ENGINEERING.FOOBAR.COM realm, but a host named ENGINEERING.FOOBAR.COM is for some reason in another realm. In that case, you would set up TXT records for all hosts, rather than relying on the fallback to the domain name.)
Even if you do not choose to use this mechanism within your site, you may wish to set it up anyway, for use when interacting with other sites.
MIT recommends that your KDCs have a predefined set of
CNAME records (DNS hostname aliases), such as kerberos
for the master KDC and
kerberos-1, kerberos-2, ... for the
slave KDCs. This way, if you need to swap a machine, you only need to
change a DNS entry, rather than having to change hostnames.
A new mechanism for locating KDCs of a realm through DNS has been added
to the MIT Kerberos V5 distribution. A relatively new
record type called SRV has been added to DNS. Looked up by a
service name and a domain name, these records indicate the hostname and
port number to contact for that service, optionally with weighting and
prioritization. (See RFC 2782 if you want more information. You can
follow the example below for straightforward cases.)
The use with Kerberos is fairly straightforward. The domain name used in the SRV record name is the domain-style Kerberos realm name. (It is possible to have Kerberos realm names that are not DNS-style names, but we don't recommend it for Internet use, and our code does not support it well.) Several different Kerberos-related service names are used:
_kerberos._udp_kerberos._tcp_kerberos-master._udpIf you have only one KDC, or for whatever reason there is no accessible
KDC that would get database changes faster than the others, you do not
need to define this entry.
_kerberos-adm._tcpkadmin program and related utilities. For now, you
will also need the admin_server entry in krb5.conf.
(See krb5.conf.)
_kpasswd._udpBe aware, however, that the DNS SRV specification requires that the hostnames listed be the canonical names, not aliases. So, for example, you might include the following records in your (BIND-style) zone file:
$ORIGIN foobar.com.
_kerberos TXT "FOOBAR.COM"
kerberos CNAME daisy
kerberos-1 CNAME use-the-force-luke
kerberos-2 CNAME bunny-rabbit
_kerberos._udp SRV 0 0 88 daisy
SRV 0 0 88 use-the-force-luke
SRV 0 0 88 bunny-rabbit
_kerberos-master._udp SRV 0 0 88 daisy
_kerberos-adm._tcp SRV 0 0 749 daisy
_kpasswd._udp SRV 0 0 464 daisy
As with the DNS-based mechanism for determining the Kerberos realm of a
host, we recommend distributing the information this way for use by
other sites that may want to interact with yours using Kerberos, even if
you don't immediately make use of it within your own site. If you
anticipate installing a very large number of machines on which it will
be hard to update the Kerberos configuration files, you may wish to do
all of your Kerberos service lookups via DNS and not put the information
(except for admin_server as noted above) in future versions of
your krb5.conf files at all. Eventually, we hope to phase out
the listing of server hostnames in the client-side configuration files;
making preparations now will make the transition easier in the future.
Your Kerberos database contains all of your realm's Kerberos principals,
their passwords, and other administrative information about each
principal. For the most part, you will use the kdb5_util program
to manipulate the Kerberos database as a whole, and the kadmin
program to make changes to the entries in the database. (One notable
exception is that users will use the kpasswd program to change
their own passwords.) The kadmin program has its own
command-line interface, to which you type the database administrating
commands.
Kdb5_util provides a means to create, delete, load, or dump a
Kerberos database. It also includes a command to stash a copy of the
master database key in a file on a KDC, so that the KDC can authenticate
itself to the kadmind and krb5kdc daemons at boot time.
Kadmin provides for the maintenance of Kerberos principals, KADM5
policies, and service key tables (keytabs). It exists as both a
Kerberos client, kadmin, using Kerberos authentication and an
RPC, to operate securely from anywhere on the network, and as a local
client, kadmin.local, intended to run directly on the KDC without
Kerberos authentication. kadmin.local need not run on the kdc if
the database is LDAP. Other than the fact that the remote client uses
Kerberos to authenticate the person using it, the functionalities of the two
versions are identical. The local version is necessary to enable you to set up
enough of the database to be able to use the remote version.
It replaces the now obsolete kdb5_edit (except for
database dump and load, which are provided by kdb5_util).
The remote version authenticates to the KADM5 server using the service
principal kadmin/admin. If the credentials cache contains a
ticket for the kadmin/admin principal, and the ‘-c ccache’
option is specified, that ticket is used to authenticate to KADM5.
Otherwise, the ‘-p’ and ‘-k’ options are used to specify the
client Kerberos principal name used to authenticate. Once kadmin has
determined the principal name, it requests a kadmin/admin
Kerberos service ticket from the KDC, and uses that service ticket to
authenticate to KADM5.
You can invoke kadmin or kadmin.local with any of the
following options:
kadmin will append admin to
either the primary principal name, the environment variable USER, or to
the username obtained from getpwuid, in order of preference.
kadmin. This is useful for writing
scripts that pass specific queries to kadmin.
You can invoke kadmin with any of the following options:
kadmin/admin
service, which can be acquired with the kinit program. If this
option is not specified, kadmin requests a new service ticket
from the KDC, and stores it in its own temporary ccache.
Note: This database specific argument is applicable only to kadmin.local
and the KADM5 server.
You can invoke kadmin.local with an of the follwing options:
Many of the kadmin commands take a duration or time as an
argument. The date can appear in a wide variety of formats, such as:
"15 minutes"
"7 days"
"1 month"
"2 hours"
"400000 seconds"
"next year"
"this Monday"
"next Monday"
yesterday
tomorrow
now
"second Monday"
fortnight
"3/31/1992 10:00:07 PST"
"January 23, 2007 10:05pm"
"22:00 GMT"
Note that if the date specification contains spaces, you must enclose it in double quotes. Note also that you cannot use a number without a unit. (I.e., “"60 seconds"” is correct, but “60” is incorrect.) All keywords are case-insensitive. The following is a list of all of the allowable keywords.
kadmin recognizes abbreviations for most of the world's time
zones. A complete listing appears in kadmin Time Zones.
Each entry in the Kerberos database contains a Kerberos principal (see Definitions) and the attributes and policies associated with that principal.
To retrieve a listing of the attributes and/or policies associated with
a principal, use the kadmin get_principal command, which
requires the “inquire” administrative privilege. The syntax is:
get_principal principal
The get_principal command has the alias getprinc.
For example, suppose you wanted to view the attributes of the
principal
jennifer/root@ATHENA.MIT.EDU.
You would type:
shell% kadmin
kadmin: getprinc jennifer/root
Principal: jennifer/root@ATHENA.MIT.EDU
Expiration date: [never]
Last password change: Mon Jan 31 02:06:40 EDT 2002
Password Expiration date: [none]
Maximum ticket life: 0 days 10:00:00
Maximum renewable life: 7 days 00:00:00
Last modified: Wed Jul 24 14:46:25 EDT 2002 (joeadmin/admin@ATHENA.MIT.EDU)
Last successful authentication: Mon Jul 29 18:20:17 EDT 2002
Last failed authentication: Mon Jul 29 18:18:54 EDT 2002
Failed password attempts: 3
Number of keys: 2
Key: vno 2, Triple DES cbc mode with HMAC/sha1, no salt
Key: vno 2, DES cbc mode with CRC-32, no salt
Attributes: DISALLOW_FORWARDABLE, DISALLOW_PROXIABLE
Policy: [none]
kadmin:
The get_principal command has a -terse option, which lists
the fields as a quoted, tab-separated string. For example:
kadmin: getprinc -terse jennifer/root
jennifer/root@ATHENA.MIT.EDU 0 1027458564
0 36000 (joeadmin/admin@ATHENA.MIT.EDU
1027536385 18 2 0 [none] 604800 1027980137
1027980054 3 2 1 2 16 0 1
2 1 0
kadmin:
To generate a listing of principals, use the kadmin
list_principals command, which requires the “list” privilege.
The syntax is:
list_principals [expression]
where expression is a shell-style glob expression that
can contain the characters ‘*’, ‘?’, ‘[’, and ‘]’.
All policy names matching the expression are displayed. The
list_principals command has the aliases listprincs,
get_principals, and getprincs. For example:
kadmin: listprincs test*
test3@ATHENA.MIT.EDU
test2@ATHENA.MIT.EDU
test1@ATHENA.MIT.EDU
testuser@ATHENA.MIT.EDU
kadmin:
If no expression is provided, all principals are printed.
Administrative privileges for the Kerberos database are stored in the
file kadm5.acl.
The format of the file is:
Kerberos_principal permissions [target_principal] [restrictions]
The Kerberos principal (and optional target principal) can include the
“*” wildcard, so if you want any principal with the instance
“admin” to have full permissions on the database, you could use the
principal “*/admin@REALM” where “REALM” is your Kerberos
realm. target_principal can also include backreferences to
Kerberos_principal, in which "*number" matches the
component number in the Kerberos_principal.
Note: a common use of an admin instance is so you can grant
separate permissions (such as administrator access to the Kerberos
database) to a separate Kerberos principal. For example, the user
joeadmin might have a principal for his administrative
use, called joeadmin/admin. This way,
joeadmin would obtain joeadmin/admin
tickets only when he actually needs to use those permissions.
The permissions are represented by single letters; UPPER-CASE letters represent negative permissions. The permissions are:
The restrictions are a string of flags. Allowed restrictions are:
+ and - flags for the kadmin addprinc and
modprinc commands.
The above flags act as restrictions on any add or modify operation which is allowed due to that ACL line.
Here is an example of a kadm5.acl file. Note that order is
important; permissions are determined by the first matching entry.
*/admin@ATHENA.MIT.EDU *
joeadmin@ATHENA.MIT.EDU ADMCIL
joeadmin/*@ATHENA.MIT.EDU il */root@ATHENA.MIT.EDU
*@ATHENA.MIT.EDU cil *1/admin@ATHENA.MIT.EDU
*/*@ATHENA.MIT.EDU i
*/admin@EXAMPLE.COM * -maxlife 9h -postdateable
In the above file, any principal in the
ATHENA.MIT.EDU realm with an admin instance has all
administrative privileges. The user joeadmin
has all permissions with his admin instance,
joeadmin/admin@ATHENA.MIT.EDU (matches the first
line). He has no permissions at all with his null instance,
joeadmin@ATHENA.MIT.EDU (matches the second line).
His root instance has inquire and list permissions with any
other principal that has the instance root. Any principal
in ATHENA.MIT.EDU can inquire, list, or change the password of
their admin instance, but not any other admin instance.
Any principal in the realm ATHENA.MIT.EDU (except for
joeadmin@ATHENA.MIT.EDU, as mentioned above) has
inquire privileges. Finally, any principal with an admin instance
in EXAMPLE.COM has all permissions, but any principal that they
create or modify will not be able to get postdateable tickets or tickets
with a life of longer than 9 hours.
To add a principal to the database, use the kadmin add_principal
command, which requires the “add” administrative privilege. This
function creates the new principal, prompting twice for a password, and,
if neither the -policy nor -clearpolicy options are specified and the
policy “default” exists, assigns it that policy. The syntax is:
kadmin: add_principal [options] principal
To modify attributes of a principal, use the kadmin
modify_principal command, which requires the “modify”
administrative privilege. The syntax is:
kadmin: modify_principal [options] principal
add_principal has the aliases addprinc and
ank2. modify_principal has the alias modprinc.
The add_principal and modify_principal commands take the
following switches:
modify_principal, the current policy assigned to the principal is
set or changed. With add_principal, if this option is not
supplied, the -clearpolicy is not specified, and the policy “default”
exists, that policy is assigned. If a principal is created with no
policy, kadmin will print a warning message.
modify_principal, removes the current policy from a
principal. For add_principal, suppresses the automatic
assignment of the policy “default”.
add_principal
only). MIT recommends using this option for host keys.
add_principal only). MIT does
not recommend using this option.
If you want to just use the default values, all you need to do is:
kadmin: addprinc jennifer
WARNING: no policy specified for "jennifer@ATHENA.MIT.EDU";
defaulting to no policy.
Enter password for principal jennifer@ATHENA.MIT.EDU: <= Type the password.
Re-enter password for principal jennifer@ATHENA.MIT.EDU: <=Type it again.
Principal "jennifer@ATHENA.MIT.EDU" created.
kadmin:
If you want to create a principal which is contained by a LDAP object, all you need to do is:
kadmin: addprinc -x dn=cn=jennifer,dc=example,dc=com jennifer
WARNING: no policy specified for "jennifer@ATHENA.MIT.EDU";
defaulting to no policy.
Enter password for principal jennifer@ATHENA.MIT.EDU: <= Type the password.
Re-enter password for principal jennifer@ATHENA.MIT.EDU: <=Type it again.
Principal "jennifer@ATHENA.MIT.EDU" created.
kadmin:
If you want to create a principal under a specific LDAP container and link to an existing LDAP object, all you need to do is:
kadmin: addprinc -x containerdn=dc=example,dc=com -x linkdn=cn=david,dc=example,dc=com david
WARNING: no policy specified for "david@ATHENA.MIT.EDU";
defaulting to no policy.
Enter password for principal david@ATHENA.MIT.EDU: <= Type the password.
Re-enter password for principal david@ATHENA.MIT.EDU: <=Type it again.
Principal "david@ATHENA.MIT.EDU" created.
kadmin:
If you want to associate a ticket policy to a principal, all you need to do is:
kadmin: modprinc -x tktpolicy=userpolicy david
Principal "david@ATHENA.MIT.EDU" modified.
kadmin:
If, on the other hand, you want to set up an account that expires on January 1, 2000, that uses a policy called “stduser”, with a temporary password (which you want the user to change immediately), you would type the following. (Note: each line beginning with ⇒ is a continuation of the previous line.)
kadmin: addprinc david -expire "1/1/2000 12:01am EST" -policy stduser
⇒ +needchange
Enter password for principal david@ATHENA.MIT.EDU: <= Type the password.
Re-enter password for principal
david@ATHENA.MIT.EDU: <= Type it again.
Principal "david@ATHENA.MIT.EDU" created.
kadmin:
If you will need cross-realm authentication, you need to add principals
for the other realm's TGT to each realm. For example, if you need to
do cross-realm authentication between the realms ATHENA.MIT.EDU
and EXAMPLE.COM, you would need to add the principals
‘krbtgt/EXAMPLE.COM@ATHENA.MIT.EDU’ and
‘krbtgt/ATHENA.MIT.EDU@EXAMPLE.COM’ to both
databases. You need to be sure the passwords and the key version
numbers (kvno) are the same in both databases. This may require
explicitly setting the kvno with the ‘-kvno’ option. See
Cross-realm Authentication for more details.
To delete a principal, use the kadmin delete_principal command,
which requires the “delete” administrative privilege. The syntax is:
delete_principal [-force] principal
delete_principal has the alias delprinc. The
-force option causes delete_principal not to ask if you're
sure. For example:
kadmin: delprinc jennifer
Are you sure you want to delete the principal
"jennifer@ATHENA.MIT.EDU"? (yes/no): yes
Principal "jennifer@ATHENA.MIT.EDU" deleted.
Make sure that you have removed this principal from
all ACLs before reusing.
kadmin:
To change a principal's password use the kadmin change_password
command, which requires the “modify” administrative privilege (unless
the principal is changing his/her own password). The syntax is:
change_password [options] principal
The change_password option has the alias cpw.
change_password takes the following options:
For example:
kadmin: cpw david
Enter password for principal david@ATHENA.MIT.EDU: <= Type the new password.
Re-enter password for principal david@ATHENA.MIT.EDU: <= Type it again.
Password for david@ATHENA.MIT.EDU changed.
kadmin:
Note that change_password will not let you change the password to
one that is in the principal's password history.
A policy is a set of rules governing passwords. Policies can dictate minimum and maximum password lifetimes, minimum number of characters and character classes a password must contain, and the number of old passwords kept in the database.
To retrieve a policy, use the kadmin get_policy command, which
requires the “inquire” administrative privilege. The syntax is:
get_policy [-terse] policy
The get_policy command has the alias getpol. For example:
kadmin: get_policy admin
Policy: admin
Maximum password life: 180 days 00:00:00
Minimum password life: 00:00:00
Minimum password length: 6
Minimum number of password character classes: 2
Number of old keys kept: 5
Reference count: 17
kadmin:
The reference count is the number of principals using that policy.
The get_policy command has a -terse option, which lists
each field as a quoted, tab-separated string. For example:
kadmin: get_policy -terse admin
admin 15552000 0 6 2 5 17
kadmin:
You can retrieve the list of policies with the kadmin
list_policies command, which requires the “list” privilege. The
syntax is:
list_policies [expression]
where expression is a shell-style glob expression that can
contain the characters *, ?, and []. All policy names matching the
expression are displayed. The list_policies command has the aliases
listpols, get_policies, and getpols. For example:
kadmin: listpols
test-pol
dict-only
once-a-min
test-pol-nopw
kadmin: listpols t*
test-pol
test-pol-nopw
kadmin:
To add a new policy, use the kadmin add_policy command, which
requires the “add” administrative privilege. The syntax is:
add_policy [options] policy_name
To modify attributes of a principal, use the kadmin modify_policy
command, which requires the “modify” administrative privilege. The
syntax is:
modify_policy [options] policy_name
add_policy has the alias addpol.
modify_poilcy has the alias modpol.
The add_policy and modify_policy commands take the
following switches:
Note: The policies are created under realm container in the LDAP database.
To delete a policy, use the kadmin delete_policy command,
which requires the “delete” administrative privilege. The syntax is:
delete_policy [-force] policy_name
The delete_policy command has the alias delpol.
It prompts for confirmation before deletion.
For example:
kadmin: delete_policy guests
Are you sure you want to delete the policy "guests"?
(yes/no): yes
kadmin:
Note that you must cancel the policy from all principals before deleting
it. The delete_policy command will fail if it is in use by any
principals.
If a policy specifies a number of old keys kept of two or more, the stored old keys are encrypted in a history key, which is found in the key data of the kadmin/history principal.
Currently there is no support for proper rollover of the history key, but you can change the history key (for example, to use a better encryption type) at the cost of invalidating currently stored old keys. To change the history key, run:
kadmin: change_password -randkey kadmin/history
This command will fail if you specify the -keepold flag. Only one new history key will be created, even if you specify multiple key/salt combinations.
In the future, we plan to migrate towards encrypting old keys in the master key instead of the history key, and implementing proper rollover support for stored old keys.
The kdb5_util command is the primary tool for administrating the
Kerberos database. The syntax is:
kdb5_util command [kdb5_util_options] [command_options]
The kdb5_util command takes the following options, which override
the defaults specified in the configuration files:
To dump a Kerberos database into a file, use the kdb5_util
dump command on one of the KDCs. The syntax is:
kdb5_util dump [-old] [-b6] [-b7] [-ov]
[-verbose] [-mkey_convert] [-new_mkey_file] [filename
[principals...]]
The kdb5_util dump command takes the following options:
For example:
shell% kdb5_util dump dumpfile
shell%
shell% kbd5_util dump -verbose dumpfile
kadmin/admin@ATHENA.MIT.EDU
krbtgt/ATHENA.MIT.EDU@ATHENA.MIT.EDU
kadmin/history@ATHENA.MIT.EDU
K/M@ATHENA.MIT.EDU
kadmin/changepw@ATHENA.MIT.EDU
shell%
If you specify which principals to dump, you must use the full principal, as in the following example. (The line beginning with ⇒ is a continuation of the previous line.):
shell% kdb5_util dump -verbose dumpfile K/M@ATHENA.MIT.EDU
⇒ kadmin/admin@ATHENA.MIT.EDU
kadmin/admin@ATHENA.MIT.EDU
K/M@ATHENA.MIT.EDU
shell%
Otherwise, the principals will not match those in the database and will not be dumped:
shell% kdb5_util dump -verbose dumpfile K/M kadmin/admin
shell%
If you do not specify a dump file, kdb5_util will dump the
database to the standard output.
There is currently a bug where the default dump format omits the per-principal policy information. In order to dump all the data contained in the Kerberos database, you must perform a normal dump (with no option flags) and an additional dump using the “-ov” flag to a different file.
To restore a Kerberos database dump from a file, use the
kdb5_util load command on one of the KDCs. The syntax
is:
kdb5_util load [-old] [-b6] [-b7] [-ov] [-verbose]
[-update] [-hash] dumpfilename dbname [admin_dbname]
The kdb5_util load command takes the following options:
For example:
shell% kdb5_util load dumpfile principal
shell%
shell% kdb5_util load -update dumpfile principal
shell%
If the database file exists, and the -update flag was not given,
kdb5_util will overwrite the existing database.
A stash file allows a KDC to authenticate itself to the database
utilities, such as kadmin, kadmind, krb5kdc, and
kdb5_util.
To create a stash file, use the kdb5_util stash command.
The syntax is:
kdb5_util stash [-f keyfile]
For example:
shell% kdb5_util stash
kdb5_util: Cannot find/read stored master key while reading master key
kdb5_util: Warning: proceeding without master key
Enter KDC database master key: <= Type the KDC database master password.
shell%
If you do not specify a stash file, kdb5_util will stash the key
in the file specified in your kdc.conf file.
If you need to create a new Kerberos database, use the kdb5_util
create command. The syntax is:
kdb5_util create [-s]
If you specify the ‘-s’ option, kdb5_util will stash a copy
of the master key in a stash file. (See Creating a Stash File.) For
example:
shell% /usr/local/sbin/kdb5_util -r ATHENA.MIT.EDU create -s
kdb5_util: No such file or directory while setting active database to
⇒ '/usr/local/var/krb5kdc/principal'
Initializing database '/usr/local/var/krb5kdc/principal' for
⇒ realm 'ATHENA.MIT.EDU',
master key name 'K/M@ATHENA.MIT.EDU'
You will be prompted for the database Master Password.
It is important that you NOT FORGET this password.
Enter KDC database master key: <= Type the master password.
Re-enter KDC database master key to verify: <= Type it again.
shell%
If you need to destroy the current Kerberos database, use the
kdb5_util destroy command. The syntax is:
kdb5_util destroy [-f]
The destroy command destroys the database, first overwriting the
disk sectors and then unlinking the files. If you specify the
‘-f’ option, kdb5_util will not prompt you for a
confirmation before destroying the database.
shell% /usr/local/sbin/kdb5_util -r ATHENA.MIT.EDU destroy
kdb5_util: Deleting KDC database stored in /usr/local/var/krb5kdc/principal, are you sure
(type yes to confirm)? <== yes
OK, deleting database '/usr/local/var/krb5kdc/principal'...
shell%
The kdb5_ldap_util is the primary tool for administrating the Kerberos LDAP database. It allows an administrator to manage realms, Kerberos services ( KDC and Admin Server) and ticket policies.
The syntax is:
kdb5_ldap_util [-D user_dn [-w passwd]] [-H ldap_uri] command [command_options]
If you need to create a new realm, use the command as follows:
create [-r realm] [-subtrees subtree_dn_list] [-sscope search_scope] [-containerref container_reference_dn]
[-k mkeytype] [-m|-P password][-sf stashlename] [-s] [-maxtktlife max_ticket_life]
[-maxrenewlife max_renewable_ticket_life] [ticket_flags]
Options to create realm in directory are as follows:
-allow_postdated prohibits principals from obtaining postdated tickets. (Sets the ‘KRB5_KDB_DISALLOW_POSTDATED’ flag.).+allow_postdated clears this flag.
-allow_forwardable prohibits principals from obtaining forwardable tickets. (Sets the
‘KRB5_KDB_DISALLOW_FORWARDABLE’ flag.) +allow_forwardable clears this flag.
-allow_renewable prohibits principals from obtaining renewable tickets. (Sets the ‘KRB5_KDB_DISALLOW_RENEWABLE’ flag.) +allow_renewable clears this flag.
-allow_proxiable prohibits principals from obtaining proxiable tickets. (Sets the ‘KRB5_KDB_DISALLOW_PROXABLE’ flag.) +allow_proxiable clears this flag.
-allow_dup_skey disables user-to-user authentication for
principals by prohibiting principals from obtaining a sessions key for
another user. (Sets the ‘KRB5_KDB_DISALLOW_DUP_SKEY’ flag.)
+allow_dup_skey clears this flag.
+requires_preauth requires principals to preauthenticate before being allowed to kinit. (Sets the ‘KRB5_KDB_REQURES_PRE_AUTH’ flag.) -requires_preauth clears this flag.
+requires_hwauth requires principals to preauthenticate using a
hardware device before being allowed to kinit. (Sets the
‘KRB5_KDB_REQURES_HW_AUTH’ flag.) -requires_hwauth clears
this flag.
+ok_as_delegate sets the OK-AS-DELEGATE flag on tickets issued for use
with this principal as the service, which clients may use as a hint that
credentials can and should be delegated when authenticating to the service.
(Sets the ‘KRB5_KDB_OK_AS_DELEGATE’ flag.) -ok_as_delegate clears
this flag.
-allow_svr prohibits the issuance of service tickets for principals. (Sets the ‘KRB5_KDB_DISALLOW_SVR’ flag.) +allow_svr clears this flag.
-allow_tgs_req specifies that a Ticket-Granting Service
(TGS) request for a service ticket for principals is not
permitted. This option is useless for most
things.+allow_tgs_req clears this flag. The default is
+allow_tgs_req. In effect, -allow_tgs_req sets the
‘KRB5_KDB_DISALLOW_TGT_BASED’ flag on principals in the
database.
-allow_tix forbids the issuance of any tickets for
principals. +allow_tix clears this flag. The default is
+allow_tix. In effect, -allow_tix sets the
‘KRB5_KDB_DISALLOW_ALL_TIX’ flag on principals in the database.
+needchange sets a flag in attributes field to force a password change;
-needchange clears it. The default is -needchange. In effect,
+needchange sets the ‘KRB5_KDB_REQURES_PWCHANGE’ flag on
principals in the database.
+password_changing_service sets a flag in the attributes field
marking principal as a password change service principal (useless for
most things). -password_changing_service clears the flag. This
flag intentionally has a long name. The default is
-password_changing_service. In effect,
+password_changing_service sets the
‘KRB5_KDB_PWCHANGE_SERVICE’ flag on principals in the database.
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu create -sscope 2
-subtree ou=users,dc=example,dc=com -r ATHENA.MIT.EDU
Password for "cn=admin,dc=example,dc=com":
Initializing database for realm 'ATHENA.MIT.EDU'
You will be prompted for the database Master Password.
It is important that you NOT FORGET this password.
Enter KDC database master key:
Re-enter KDC database master key to verify:
shell%
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu create -sscope 2
-subtree ou=users,dc=example,dc=com -kdcdn cn=krbkdc,dc=example,dc=com -admindn cn=krbadmin,dc=example,dc=com -r ATHENA.MIT.EDU
Password for "cn=admin,dc=example,dc=com":
Initializing database for realm 'ATHENA.MIT.EDU'
You will be prompted for the database Master Password.
It is important that you NOT FORGET this password.
Enter KDC database master key:
Re-enter KDC database master key to verify:
shell%
If you need to modify a realm, use the command as follows:
modify [-r realm] [-subtrees subtree_dn] [-sscope search_scope][-containerref container_reference_dn]
[-maxtktlifemax_ticket_life][-maxrenewlife max_renewable_ticket_life] [-ticket_flags]
Options to modify realm in directory are as follows:
-allow_postdated prohibits principals from obtaining postdated tickets. (Sets the ‘KRB5_KDB_DISALLOW_POSTDATED’ flag.).+allow_postdated clears this flag.
-allow_forwardable prohibits principals from obtaining forwardable tickets.
(Sets the ‘KRB5_KDB_DISALLOW_FORWARDABLE’ flag.) +allow_forwardable clears this flag.
-allow_renewable prohibits principals from obtaining renewable tickets. (Sets the ‘KRB5_KDB_DISALLOW_RENEWABLE’ flag.) +allow_renewable clears this flag.
-allow_proxiable prohibits principals from obtaining proxiable tickets. (Sets the ‘KRB5_KDB_DISALLOW_PROXABLE’ flag.) +allow_proxiable clears this flag.
-allow_dup_skey Disables user-to-user authentication for principals by prohibiting principals from obtaining a sessions key for another user. (Sets the ‘KRB5_KDB_DISALLOW_DUP_SKEY’ flag.). +allow_dup_skey clears This flag.
+requires_preauth requires principals to preauthenticate before being allowed to kinit. Sets the
‘KRB5_KDB_REQURES_PRE_AUTH’ flag.-requires_preauth clears this flag.
+requires_hwauth requires principals to preauthenticate using a hardware device before being allowed to kinit. (Sets the
‘KRB5_KDB_REQURES_HW_AUTH’ flag.)-requires_hwauth clears this flag.
-allow_svr prohibits the issuance of service tickets for principals. (Sets the ‘KRB5_KDB_DISALLOW_SVR’ flag.) +allow_svr clears This flag.
-allow_tgs_req specifies that a Ticket-Granting Service (TGS) request for a service ticket for principals is not permitted. This option is useless for most things.+allow_tgs_req clears this flag.
The default is. +allow_tgs_req. In effect,
-allow_tgs_req sets the ‘KRB5_KDB_DISALLOW_TGT_BASED’ flag
on principals in the database.
-allow_tix forbids the issuance of any tickets for
principals. +allow_tix clears this flag. The default is
+allow_tix. In effect, -allow_tix sets the
‘KRB5_KDB_DISALLOW_ALL_TIX’ flag on principals in the database.
+needchange sets a flag in attributes field to force a password change; -needchange clears it.
The default is -needchange. In effect,+needchange sets
the ‘KRB5_KDB_REQURES_PWCHANGE’ flag on principals in the
database.
+password_changing_service sets a flag in the attributes field marking principal as a password change service principal (useless for most things).-password_changing_service clears the flag. This flag intentionally has a long name. The default is -password_changing_service
In effect, +password_changing_service sets the ‘KRB5_KDB_PWCHANGE_SERVICE’ flag on principals in the database.
For example:
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu
modify -r ATHENA.MIT.EDU +requires_preauth
Password for "cn=admin,dc=example,dc=com":
shell%
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu view -r ATHENA.MIT.EDU
Password for "cn=admin,dc=example,dc=com":
Realm Name: ATHENA.MIT.EDU
Subtree: ou=users,dc=example,dc=com
Subtree: ou=servers,dc=example,dc=com
SearchScope: ONE
Maximum ticket life: 0 days 01:00:00
Maximum renewable life: 0 days 10:00:00
Ticket flags: DISALLOW_FORWARDABLE
shell%
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldap-server1.mit.edu destroy -r ATHENA.MIT.EDU
Password for "cn=admin,dc=example,dc=com":
Deleting KDC database of 'ATHENA.MIT.EDU', are you sure?
type 'yes' to confirm)? Yes
OK, deleting database of 'ATHENA.MIT.EDU'...
shell%
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu list
Password for "cn=admin,dc=example,dc=com":
ATHENA.MIT.EDU
OPENLDAP.MIT.EDU
MEDIA-LAB.MIT.EDU
shell%
stashsrvpw [-f filename] servicedn
This command allows an administrator to store the password of service object in a file. The KDC and Administration server uses this password to authenticate to the LDAP server. Options are as follows:
/usr/local/var/service_passwd is used.
shell% kdb5_ldap_util stashsrvpw -f /home/andrew/conf_keyle cn=service-kdc,dc=example,dc=com
Password for "cn=service-kdc,dc=example,dc=com":
Re-enter password for "cn=service-kdc,dc=example,dc=com":
shell%
This command creates a ticket policy in directory.
create_policy [-r realm] [-maxrenewlife max_renewable_ticket_life] [ticket_flags] policy_name
Ticket policy objects are created under the realm container.
This command modifies a ticket policy in directory.
modify_policy [-r realm] [-maxrenewlife max_renewable_ticket_life] [ticket_flags] policy_name
Options are as follows:
The various flags are:
-allow_postdated prohibits principals from obtaining postdated tickets. (Sets the ‘KRB5_KDB_DISALLOW_POSTDATED’ flag.).+allow_postdated clears this flag.
-allow_forwardable prohibits principals from obtaining forwardable tickets. (Sets the
‘KRB5_KDB_DISALLOW_FORWARDABLE’ flag.) +allow_forwardable clears this flag.
-allow_renewable prohibits principals from obtaining renewable tickets. (Sets the ‘KRB5_KDB_DISALLOW_RENEWABLE’ flag.) +allow_renewable clears this flag.
-allow_proxiable prohibits principals from obtaining proxiable tickets. (Sets the ‘KRB5_KDB_DISALLOW_PROXABLE’ flag.) +allow_proxiable clears this flag.
-allow_dup_skey Disables user-to-user authentication for principals by prohibiting principals from obtaining a sessions key for another user. (Sets the ‘KRB5_KDB_DISALLOW_DUP_SKEY’ flag.). +allow_dup_skey clears This flag.
+requires_preauth requires principals to preauthenticate before being allowed to kinit. (Sets the ‘KRB5_KDB_REQURES_PRE_AUTH’ flag.)
-requires_preauth clears this flag.
+requires_hwauth requires principals to preauthenticate using a
hardware device before being allowed to kinit. (Sets the
‘KRB5_KDB_REQURES_HW_AUTH’ flag.) -requires_hwauth clears
this flag.
-allow_svr prohibits the issuance of service tickets for principals. (Sets the ‘KRB5_KDB_DISALLOW_SVR’ flag.) +allow_svr clears This flag.
-allow_tgs_req specifies that a Ticket-Granting Service (TGS) request for a service ticket for principals is not permitted. This option is useless for most things.+allow_tgs_req clears this flag.
The default is +allow_tgs_req. In effect,
-allow_tgs_req sets the ‘KRB5_KDB_DISALLOW_TGT_BASED’ flag
on principals in the database.
-allow_tix forbids the issuance of any tickets for
principals. +allow_tix clears this flag. The default is
+allow_tix. In effect, -allow_tix sets the
‘KRB5_KDB_DISALLOW_ALL_TIX’ flag on principals in the database.
+needchange sets a flag in attributes field to force a password change;
-needchange clears it. The default is -needchange. In
effect, +needchange sets the ‘KRB5_KDB_REQURES_PWCHANGE’
flag on principals in the database.
+password_changing_service sets a flag in the attributes field
marking principal as a password change service principal (useless for
most things). -password_changing_service clears the flag.
This flag intentionally has a long name. The default is
-password_changing_service. In effect,
+password_changing_service sets the
‘KRB5_KDB_PWCHANGE_SERVICE’ flag on principals in the database.
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu create_policy
-r ATHENA.MIT.EDU -maxtktlife "1 day" -maxrenewlife "1 week" -allow_forwardable usertktpolicy
Password for "cn=admin,dc=example,dc=com":
shell%
For example:
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu view_policy
-r ATHENA.MIT.EDU usertktpolicy
Password for "cn=admin,dc=example,dc=com":
Ticket policy: usertktpolicy
Maxmum ticket life: 0 days 01:00:00
Maxmum renewable life: 0 days 10:00:00
Ticket flags: DISALLOW_FORWARDABLE REQUIRES_PWCHANGE
shell%
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu
destroy_policy -r ATHENA.MIT.EDU usertktpolicy
Password for "cn=admin,dc=example,dc=com":
This will delete the policy object 'usertktpolicy', are you sure?
(type 'yes' to confirm)? Yes
** policy object 'usertktpolicy' deleted.
shell%
Option are as follows:
For example:
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu list_policy -r ATHENA.MIT.EDU
Password for "cn=admin,dc=example,dc=com":
usertktpolicy
tempusertktpolicy
krbtktpolicy
shell%
create_service -kdc|-admin|-pwd [-servicehost service_host_list] [-realm realm_list] [-randpw|
-fileonly] [-filename] service_dn
Creates a service object in directory and assigns appropriate rights on the container holding kerberos data.
Options are as follows:
server1#tcp#88:server2#udp#89.
-fileonly option cannot be used with -randpw option.
-randpw option can not be used when -fileonly option is specified.
For example:
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu
create_service -kdc -randpw -f /home/andrew/service_passwd cn=service-kdc,dc=example,dc=com
Password for "cn=admin,dc=example,dc=com":
File does not exist. Creating the file /home/andrew/service_passwd...
shell%
modify_service [-servicehost service_host_list |[-clearservicehost service_host_list] [-addservicehost service_host_list]] [-realm realm_list | [-clearrealm realm_list] [-addrealm realm_list]] service_dn
Modifies the attributes of a service and assigns appropriate rights, if realm associations are changed.
Options are as follows:
server1#tcp#88:server2#udp#89
For example:
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu
modify_service -realm ATHENA.MIT.EDU cn=service-kdc,dc=example,dc=com
Password for "cn=admin,dc=example,dc=com":
Changing rights for the service object. Please wait ... done
shell%
For example:
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu
view_service cn=service-kdc,dc=example,dc=com
Password for "cn=admin,dc=example,dc=com":
Service dn: cn=service-kdc,dc=example,dc=com
Service type: kdc
Service host list:
Realm DN list: cn=ATHENA.MIT.EDU,cn=Kerberos,dc=example,dc=com
shell%
destroy_service [-force] [-f stashfilename] service_dn
Destroys an existing service. Options are as follows :
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu
destroy_service cn=service-kdc,dc=example,dc=com
Password for "cn=admin,dc=example,dc=com":
This will delete the service object 'cn=service-kdc,dc=example,dc=com', are you sure?
(type 'yes' to confirm)? Yes
** service object 'cn=service-kdc,dc=example,dc=com' deleted.
shell%
defaultsearchbase from slapd.conf file will be used, where as in the case of eDirectory, the default value for the base DN is Root.
For example:
shell% kdb5_ldap_util -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu list_service
Password for "cn=admin,dc=example,dc=com":
cn=service-kdc,dc=example,dc=com
cn=service-adm,dc=example,dc=com
cn=service-pwd,dc=example,dc=com
shell%
setsrvpw [-randpw|-fileonly][-f filename] service_dn
Allows an administrator to set password for service objects such as KDC and Administration server in eDirectory and store them in a file. The
-fileonly command stores the password in a file and not in the eDirectory object.
Options are as follows:
-fileonly option can not be used if -randpw option is already specified.
-randpw option can not be used when -fileonly option is specified.
For example:
shell% kdb5_ldap_util setsrvpw -D cn=admin,dc=example,dc=com -H ldaps://ldap-server1.mit.edu
setsrvpw -f /home/andrew/conf_keyfile cn=service-kdc,dc=example,dc=com
Password for "cn=admin,dc=example,dc=com":
Password for "cn=service-kdc,dc=example,dc=com":
Re-enter password for "cn=service-kdc,dc=example,dc=com":
shell%
In order for a KDC in one realm to authenticate Kerberos users in a different realm, it must share a key with the KDC in the other realm. In both databases, there must be krbtgt service principals for realms. These principals should all have the same passwords, key version numbers, and encryption types. For example, if the administrators of ATHENA.MIT.EDU and EXAMPLE.COM wanted to authenticate across the realms, they would run the following commands on the KDCs in both realms:
shell%: kadmin.local -e "des3-hmac-sha1:normal des-cbc-crc:v4"
kadmin: addprinc -requires_preauth krbtgt/ATHENA.MIT.EDU@EXAMPLE.COM
Enter password for principal krbtgt/ATHENA.MIT.EDU@EXAMPLE.COM:
Re-enter password for principal krbtgt/ATHENA.MIT.EDU@EXAMPLE.COM:
kadmin: addprinc -requires_preauth krbtgt/EXAMPLE.COM@ATHENA.MIT.EDU
Enter password for principal krbtgt/EXAMPLE.COM@ATHENA.MIT.EDU:
Enter password for principal krbtgt/EXAMPLE.COM@ATHENA.MIT.EDU:
kadmin:
Even if most principals in a realm are generally created with the requires_preauth flag enabled, this flag is not desirable on cross-realm authentication keys because doing so makes it impossible to disable preauthentication on a service-by-service basis. Disabling it as in the example above is recommended.
It is also very important that these principals have good passwords. MIT recommends that TGT principal passwords be at least 26 characters of random ASCII text.
A Kerberos Ticket Granting Ticket (TGT) is a service ticket for the principal krbtgt/REALM. The key for this principal is created when the Kerberos database is initialized and need not be changed. However, it will only have the encryption types supported by the KDC at the time of the initial database creation. To allow use of newer encryption types for the TGT, this key has to be changed.
Changing this key using the normal kadmin change_password command
would invalidate any previously issued TGTs. Therefore, when changing
this key, normally one should use the -keepold flag to
change_password to retain the previous key in the database as
well as the new key. For example:
kadmin: change_password -randkey -keepold krbtgt/ATHENA.MIT.EDU@ATHENA.MIT.EDU
After issuing this command, the old key is still valid and is still
vulnerable to (for instance) brute force attacks. To completely
retire an old key or encryption type, run the purgekeys command
to delete keys with older kvnos, ideally first making sure that all
tickets issued with the old keys have expired.
ldapi:// can be used if the LDAP server and KDC
service are running on the same machine.
For the latter, you need to specify the location of CA certificate location in slapd.conf file.
Refer to the following link for more information:
For example,
TLS_CACERT /etc/openldap/certs/cacert.pem
include /etc/openldap/schema/kerberos.schema
ldap_kdc_dn and ldap_kadmind_dn directives in krb5.conf;
their passwords can be stashed with kdb5_ldap_util stashsrvpw
and the resulting file specified with the
ldap_service_password_file directive.
ldap_kerberos_container_dn directive in krb5.conf. Realm
container entries will be created underneath this DN. Principal
entries may exist either underneath the realm container (the default)
or in separate trees referenced from the realm container.
Sample access control information
access to dn.base=""
by * read
access to dn.base="cn=Subschema"
by * read
access to attrs=userPassword,userPKCS12
by self write
by * auth
access to attrs=shadowLastChange
by self write
by * read
# Providing access to realm container
access to dn.subtree= "cn=EXAMPLE.COM,cn=krbcontainer,dc=example,dc=com"
by dn.exact="cn=kdc-service,dc=example,dc=com" read
by dn.exact="cn=adm-service,dc=example,dc=com" write
by * none
# Providing access to principals, if not underneath realm container
access to dn.subtree= "ou=users,dc=example,dc=com"
by dn.exact="cn=kdc-service,dc=example,dc=com" read
by dn.exact="cn=adm-service,dc=example,dc=com" write
by * none
access to *
by * read
If the locations of the container and principals or the DNs of the service objects for a realm are changed then this information should be updated.
slapd -h "ldapi:/// ldaps:///"
‘realms’ ‘database_module’ ‘dbmodules’ ‘db_library’ ‘db_module_dir’ ‘ldap_kdc_dn’ ‘ldap_kadmind_dn’ ‘ldap_service_password_file’ ‘ldap_servers’ ‘ldap_conns_per_server’
For the sample krb5.conf file, refer to Sample krb5.conf File. For more details, refer to the section krb5.conf
kdb5_ldap_util -D cn=admin,dc=example,dc=com create -subtrees ou=users,dc=example,dc=com -r EXAMPLE.COM -s
Use the -subtrees option if the principals are to exist in a separate subtree from the realm container. Before executing the command, make sure that the subtree mentioned above ‘(ou=users,dc=example,dc=com)’ exists. If the principals will exist underneath the realm container, omit the -subtrees option and do not worry about creating the principal subtree.
For more information, refer to the section Global Operations on the Kerberos LDAP Database.
The realm object is created under the ldap_kerberos_container_dn specified in the configuration file. This operation will also create the Kerberos container, if not present already. This will be used to store information related to all realms.
kdb5_ldap_util -D cn=admin,dc=example,dc=com stashsrvpw -f /etc/kerberos/service.keyfile cn=krbadmin,dc=example,dc=com
With the LDAP back end it is possible to provide aliases for principal entries. Currently we provide no mechanism provided for creating aliases, so it must be done by direct manipulation of the LDAP entries.
An entry with aliases contains multiple values of the krbPrincipalName attribute. Since LDAP attribute values are not ordered, it is necessary to specify which principal name is canonical, by using the krbCanonicalName attribute. Therefore, to create aliases for an entry, first set the krbCanonicalName attribute of the entry to the canonical principal name (which should be identical to the pre-existing krbPrincipalName value), and then add additional krbPrincipalName attributes for the aliases.
Principal aliases are only returned by the KDC when the client
requests canonicalization. Canonicalization is normally requested for
service principals; for client principals, an explicit flag is often
required (e.g. kinit -C) and canonicalization is only performed
for initial ticket requests.
If you need to install the Kerberos V5 programs on an application server, please refer to the Kerberos V5 Installation Guide. Once you have installed the software, you need to add that host to the Kerberos database (see Adding or Modifying Principals), and generate a keytab for that host, that contains the host's key. You also need to make sure the host's clock is within your maximum clock skew of the KDCs.
A keytab is a host's copy of its own keylist, which is analogous
to a user's password. An application server that needs to authenticate
itself to the KDC has to have a keytab that contains its own principal
and key. Just as it is important for users to protect their passwords,
it is equally important for hosts to protect their keytabs. You should
always store keytab files on local disk, and make them readable only by
root, and you should never send a keytab file over a network in the
clear. Ideally, you should run the kadmin command to extract a
keytab on the host on which the keytab is to reside.
To generate a keytab, or to add a principal to an existing keytab, use
the ktadd command from kadmin, which requires the
“inquire” administrative privilege. (If you use the -glob
princ_exp option, it also requires the “list” administrative
privilege.) The syntax is:
ktadd [-k[eytab] keytab] [-q] [-e
key:salt_list] [principal | -glob princ_exp]
[...]
The ktadd command takes the following switches:
ktadd will use the
default keytab file (/etc/krb5.keytab).
ktadd to display less verbose
information.
list_principals (see Retrieving a List of Principals) command.
Here is a sample session, using configuration files that enable only ‘des-cbc-crc’ encryption. (The line beginning with ⇒ is a continuation of the previous line.)
kadmin: ktadd host/daffodil.mit.edu@ATHENA.MIT.EDU
kadmin: Entry for principal host/daffodil.mit.edu@ATHENA.MIT.EDU with
kvno 2, encryption type DES-CBC-CRC added to keytab
WRFILE:/etc/krb5.keytab.
kadmin:
kadmin: ktadd -k /usr/local/var/krb5kdc/kadmind.keytab
⇒ kadmin/admin kadmin/changepw
kadmin: Entry for principal kadmin/admin@ATHENA.MIT.EDU with
kvno 3, encryption type DES-CBC-CRC added to keytab
WRFILE:/usr/local/var/krb5kdc/kadmind.keytab.
kadmin:
To remove a principal from an existing keytab, use the kadmin
ktremove command. The syntax is:
ktremove [-k[eytab] keytab] [-q] principal [kvno | all | old]
The ktremove command takes the following switches:
ktremove will use
the default keytab file (/etc/krb5.keytab).
ktremove to display less verbose
information.
For example:
kadmin: ktremove -k /usr/local/var/krb5kdc/kadmind.keytab kadmin/admin
kadmin: Entry for principal kadmin/admin with kvno 3 removed
from keytab WRFILE:/usr/local/var/krb5kdc/kadmind.keytab.
kadmin:
In order to prevent intruders from resetting their system clocks in
order to continue to use expired tickets, Kerberos V5 is set up to
reject ticket requests from any host whose clock is not within the
specified maximum clock skew of the KDC (as specified in the
kdc.conf file). Similarly, hosts are configured to reject
responses from any KDC whose clock is not within the specified maximum
clock skew of the host (as specified in the krb5.conf file). The
default value for maximum clock skew is 300 seconds, or five minutes.
MIT suggests that you add a line to client machines'
/etc/rc files to synchronize the machine's clock to your KDC at
boot time. On UNIX hosts, assuming you had a kdc called
kerberos in your realm, this would be:
gettime -s kerberos
If the host is not likely to be rebooted frequently, you may also want to set up a cron job that adjusts the time on a regular basis.
Several aspects of Kerberos rely on name service. In order for Kerberos to provide its high level of security, it is less forgiving of name service problems than some other parts of your network. It is important that your Domain Name System (DNS) entries and your hosts have the correct information.
Each host's canonical name must be the fully-qualified host name (including the domain), and each host's IP address must reverse-resolve to the canonical name.
Other than the localhost entry, make all entries in each
machine's /etc/hosts file in the following form:
IP address fully-qualified hostname aliases
Here is a sample /etc/hosts file:
# this is a comment
127.0.0.1 localhost localhost@mit.edu
10.0.0.6 daffodil.mit.edu trillium wake-robin
Additionally, on Solaris machines, you need to be sure the “hosts”
entry in the file
/etc/nsswitch.conf includes the source
“dns” as well as “file”.
Finally, each host's keytab file must include a host/key pair for the
host's canonical name. You can list the keys in a keytab file by
issuing the command klist -k. For example:
viola# klist -k
Keytab name: /etc/krb5.keytab
KVNO Principal
---- ------------------------------------------------------------
1 host/daffodil.mit.edu@ATHENA.MIT.EDU
If you telnet to the host with a fresh credentials cache (ticket file),
and then klist, the host's service principal should be
host/fully-qualified-hostname@REALM_NAME.
If you need off-site users to be able to get Kerberos tickets in your realm, they must be able to get to your KDC. This requires either that you have a slave KDC outside your firewall, or you configure your firewall to allow UDP requests into at least one of your KDCs, on whichever port the KDC is running. (The default is port 88; other ports may be specified in the KDC's kdc.conf file.) Similarly, if you need off-site users to be able to change their passwords in your realm, they must be able to get to your Kerberos admin server. The default port for the admin server is 749.
If your on-site users inside your firewall will need to get to KDCs in other realms, you will also need to configure your firewall to allow outgoing TCP and UDP requests to port 88. Additionally, if they will need to get to any Kerberos V4 KDCs, you may also need to allow TCP and UDP requests to port 750. If your on-site users inside your firewall will need to get to Kerberos admin servers in other realms, you will also need to allow outgoing TCP and UDP requests to port 749.
If any of your KDCs are outside your firewall, you will need to allow
kprop requests to get through to the remote KDC. Kprop
uses the krb5_prop service on port 754 (tcp).
If you need your off-site users to have access to machines inside your
firewall, you need to allow TCP connections from their off-site hosts on
the appropriate ports for the programs they will be using. The
following lines from /etc/services show the default port numbers
for the Kerberos V5 programs:
ftp 21/tcp # Kerberos ftp and telnet use the
telnet 23/tcp # default ports
kerberos 88/udp kdc # Kerberos V5 KDC
kerberos 88/tcp kdc # Kerberos V5 KDC
klogin 543/tcp # Kerberos authenticated rlogin
kshell 544/tcp cmd # and remote shell
kerberos-adm 749/tcp # Kerberos 5 admin/changepw
kerberos-adm 749/udp # Kerberos 5 admin/changepw
krb5_prop 754/tcp # Kerberos slave propagation
eklogin 2105/tcp # Kerberos auth. & encrypted rlogin
By default, Kerberos V5 telnet and ftp use the same
ports as the standard telnet and ftp programs, so if you
already allow telnet and ftp connections through your firewall, the
Kerberos V5 versions will get through as well. If you do not
already allow telnet and ftp connections through your firewall, but need
your users to be able to use Kerberos V5 telnet and ftp, you can
either allow ftp and telnet connections on the standard ports, or switch
these programs to non-default port numbers and allow ftp and telnet
connections on those ports to get through.
Kerberos V5 rlogin uses the klogin service, which by
default uses port 543. Encrypted Kerberos V5
rlogin uses the eklogin service, which by default uses port
2105.
Kerberos V5 rsh uses the kshell service, which by
default uses port 544. However, the server must
be able to make a TCP connection from the kshell port to an arbitrary
port on the client, so if your users are to be able to use rsh
from outside your firewall, the server they connect to must be able to
send outgoing packets to arbitrary port numbers. Similarly, if your
users need to run rsh from inside your firewall to hosts outside
your firewall, the outside server needs to be able to connect to an
arbitrary port on the machine inside your firewall. Because
Kerberos V5 rcp uses rsh, the same issues apply. If
you need to use rsh (or rcp) through your firewall and
are concerned with the security implications of allowing connections to
arbitrary ports, MIT suggests that you have rules that
specifically name these applications and, if possible, list the allowed
hosts.
The book UNIX System Security, by David Curry, is a good starting point for learning to configure firewalls.
When you back up a secure host, you should exclude the host's keytab file from the backup. If someone obtained a copy of the keytab from a backup, that person could make any host masquerade as the host whose keytab was compromised. This could be particularly dangerous if the compromised keytab was from one of your KDCs. If the machine has a disk crash and the keytab file is lost, it is easy to generate another keytab file. (See Adding Principals to Keytabs.) If you are unable to exclude particular files from backups, you should ensure that the backups are kept as secure as the host's root password.
As with any file, it is possible that your Kerberos database could become corrupted. If this happens on one of the slave KDCs, you might never notice, since the next automatic propagation of the database would install a fresh copy. However, if it happens to the master KDC, the corrupted database would be propagated to all of the slaves during the next propagation. For this reason, MIT recommends that you back up your Kerberos database regularly. Because the master KDC is continuously dumping the database to a file in order to propagate it to the slave KDCs, it is a simple matter to have a cron job periodically copy the dump file to a secure machine elsewhere on your network. (Of course, it is important to make the host where these backups are stored as secure as your KDCs, and to encrypt its transmission across your network.) Then if your database becomes corrupted, you can load the most recent dump onto the master KDC. (See Restoring a Kerberos Database from a Dump File.)
In any complex software, there will be bugs. If you have successfully
built and installed Kerberos V5, please use the krb5-send-pr
program to fill out a Problem Report should you encounter any errors in
our software.
Bug reports that include proposed fixes are especially welcome. If you do include fixes, please send them using either context diffs or unified diffs (using ‘diff -c’ or ‘diff -u’, respectively). Please be careful when using “cut and paste” or other such means to copy a patch into a bug report; depending on the system being used, that can result in converting TAB characters into spaces, which makes applying the patches more difficult.
The krb5-send-pr program is installed in the directory
/usr/local/sbin.
The krb5-send-pr program enters the problem report into our
Problem Report Management System (PRMS), which automatically assigns it
to the engineer best able to help you with problems in the assigned
category.
The krb5-send-pr program will try to intelligently fill in as
many fields as it can. You need to choose the category,
class, severity, and priority of the problem, as well
as giving us as much information as you can about its exact nature.
The PR category will be one of:
krb5-admin krb5-appl krb5-build krb5-clients
krb5-doc krb5-kdc krb5-libs krb5-misc
pty telnet test
Choose the category that best describes the area under which your problem falls.
The class can be sw-bug, doc-bug, change-request, or support. The first two are exactly as their names imply. Use change-request when the software is behaving according to specifications, but you want to request changes in some feature or behavior. The support class is intended for more general questions about building or using Kerberos V5.
The severity of the problem indicates the problem's impact on the usability of Kerberos V5. If a problem is critical, that means the product, component or concept is completely non-operational, or some essential functionality is missing, and no workaround is known. A serious problem is one in which the product, component or concept is not working properly or significant functionality is missing. Problems that would otherwise be considered critical are rated serious when a workaround is known. A non-critical problem is one that is indeed a problem, but one that is having a minimal effect on your ability to use Kerberos V5. E.g., The product, component or concept is working in general, but lacks features, has irritating behavior, does something wrong, or doesn't match its documentation. The default severity is serious.
The priority indicates how urgent this particular problem is in relation to your work. Note that low priority does not imply low importance. A priority of high means a solution is needed as soon as possible. A priority of medium means the problem should be solved no later than the next release. A priority of low means the problem should be solved in a future release, but it is not important to your work how soon this happens. The default priority is medium.
Note that a given severity does not necessarily imply a given priority. For example, a non-critical problem might still have a high priority if you are faced with a hard deadline. Conversely, a serious problem might have a low priority if the feature it is disabling is one that you do not need.
It is important that you fill in the release field and tell us what changes you have made, if any.
A sample filled-out form from a company named “Toasters, Inc.” might look like this:
To: krb5-bugs@mit.edu
Subject: misspelled "Kerberos" in title of installation guide
From: jcb
Reply-To: jcb
Cc:
X-send-pr-version: 3.99
>Submitter-Id: mit
>Originator: Jeffrey C. Gilman Bigler
>Organization:
mit
>Confidential: no
>Synopsis: Misspelled "Kerberos" in title of installation guide
>Severity: non-critical
>Priority: low
>Category: krb5-doc
>Class: doc-bug
>Release: 1.0-development
>Environment:
<machine, os, target, libraries (multiple lines)>
System: ULTRIX imbrium 4.2 0 RISC
Machine: mips
>Description:
Misspelled "Kerberos" in title of "Kerboros V5 Installation Guide"
>How-To-Repeat:
N/A
>Fix:
Correct the spelling.
If the krb5-send-pr program does not work for you, or if you did
not get far enough in the process to have an installed and working
krb5-send-pr, you can generate your own form, using the above as
an example.
This is the Kerberos v5 library error code table. Protocol error codes
are
ERROR_TABLE_BASE_krb5 + the protocol error code number; other
error codes start at ERROR_TABLE_BASE_krb5 + 128.
This is the Kerberos v5 database library error code table.
This is the Kerberos v5 magic numbers error code table.
Generic GSSAPI Errors:
Kerberos 5 GSSAPI Errors:
This is a complete listing of the time zones recognized by the
kadmin command.
Copyright © 1985-2012 by the Massachusetts Institute of Technology.
All rights reserved.
Export of software employing encryption from the United States of America may require a specific license from the United States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting.
WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Furthermore if you modify this software you must label your software as modified software and not distribute it in such a fashion that it might be confused with the original MIT software. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.
Documentation components of this software distribution are licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License. (http://creativecommons.org/licenses/by-sa/3.0/)
Individual source code files are copyright MIT, Cygnus Support, Novell, OpenVision Technologies, Oracle, Red Hat, Sun Microsystems, FundsXpress, and others.
Project Athena, Athena, Athena MUSE, Discuss, Hesiod, Kerberos, Moira, and Zephyr are trademarks of the Massachusetts Institute of Technology (MIT). No commercial use of these trademarks may be made without prior written permission of MIT.
“Commercial use” means use of a name in a product or other for-profit manner. It does NOT prevent a commercial firm from referring to the MIT trademarks in order to convey information (although in doing so, recognition of their trademark status should be given).
The following copyright and permission notice applies to the
OpenVision Kerberos Administration system located in
kadmin/create, kadmin/dbutil, kadmin/passwd,
kadmin/server, lib/kadm5, and portions of
lib/rpc:
Copyright, OpenVision Technologies, Inc., 1993-1996, All Rights ReservedWARNING: Retrieving the OpenVision Kerberos Administration system source code, as described below, indicates your acceptance of the following terms. If you do not agree to the following terms, do not retrieve the OpenVision Kerberos administration system.
You may freely use and distribute the Source Code and Object Code compiled from it, with or without modification, but this Source Code is provided to you “AS IS” EXCLUSIVE OF ANY WARRANTY, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED. IN NO EVENT WILL OPENVISION HAVE ANY LIABILITY FOR ANY LOST PROFITS, LOSS OF DATA OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, INCLUDING, WITHOUT LIMITATION, THOSE RESULTING FROM THE USE OF THE SOURCE CODE, OR THE FAILURE OF THE SOURCE CODE TO PERFORM, OR FOR ANY OTHER REASON.
OpenVision retains all copyrights in the donated Source Code. OpenVision also retains copyright to derivative works of the Source Code, whether created by OpenVision or by a third party. The OpenVision copyright notice must be preserved if derivative works are made based on the donated Source Code.
OpenVision Technologies, Inc. has donated this Kerberos Administration system to MIT for inclusion in the standard Kerberos 5 distribution. This donation underscores our commitment to continuing Kerberos technology development and our gratitude for the valuable work which has been performed by MIT and the Kerberos community.
Portions contributed by Matt Crawford <crawdad@fnal.gov> were work
performed at Fermi National Accelerator Laboratory, which is operated
by Universities Research Association, Inc., under contract
DE-AC02-76CHO3000 with the U.S. Department of Energy.
Portions of src/lib/crypto have the following copyright:
Copyright © 1998 by the FundsXpress, INC.All rights reserved.
Export of this software from the United States of America may require a specific license from the United States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting.WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of FundsXpress. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. FundsXpress makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.
THIS SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The implementation of the AES encryption algorithm in
src/lib/crypto/builtin/aes has the following copyright:
Copyright © 2001, Dr Brian Gladman<brg@gladman.uk.net>, Worcester, UK.
All rights reserved.LICENSE TERMS
The free distribution and use of this software in both source and binary form is allowed (with or without changes) provided that:
- distributions of this source code include the above copyright notice, this list of conditions and the following disclaimer;
- distributions in binary form include the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other associated materials;
- the copyright holder's name is not used to endorse products built using this software without specific written permission.
DISCLAIMER
This software is provided 'as is' with no explcit or implied warranties in respect of any properties, including, but not limited to, correctness and fitness for purpose.
Portions contributed by Red Hat, including the pre-authentication plug-in framework and the NSS crypto implementation, contain the following copyright:
Copyright © 2006 Red Hat, Inc.
Portions copyright © 2006 Massachusetts Institute of Technology
All Rights Reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of Red Hat, Inc., nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The bundled verto source code is subject to the following license:
Copyright 2011 Red Hat, Inc.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
The implementations of GSSAPI mechglue in GSSAPI-SPNEGO in
src/lib/gssapi, including the following files:
lib/gssapi/generic/gssapi_err_generic.et
lib/gssapi/mechglue/g_accept_sec_context.c
lib/gssapi/mechglue/g_acquire_cred.c
lib/gssapi/mechglue/g_canon_name.c
lib/gssapi/mechglue/g_compare_name.c
lib/gssapi/mechglue/g_context_time.c
lib/gssapi/mechglue/g_delete_sec_context.c
lib/gssapi/mechglue/g_dsp_name.c
lib/gssapi/mechglue/g_dsp_status.c
lib/gssapi/mechglue/g_dup_name.c
lib/gssapi/mechglue/g_exp_sec_context.c
lib/gssapi/mechglue/g_export_name.c
lib/gssapi/mechglue/g_glue.c
lib/gssapi/mechglue/g_imp_name.c
lib/gssapi/mechglue/g_imp_sec_context.c
lib/gssapi/mechglue/g_init_sec_context.c
lib/gssapi/mechglue/g_initialize.c
lib/gssapi/mechglue/g_inquire_context.c
lib/gssapi/mechglue/g_inquire_cred.c
lib/gssapi/mechglue/g_inquire_names.c
lib/gssapi/mechglue/g_process_context.c
lib/gssapi/mechglue/g_rel_buffer.c
lib/gssapi/mechglue/g_rel_cred.c
lib/gssapi/mechglue/g_rel_name.c
lib/gssapi/mechglue/g_rel_oid_set.c
lib/gssapi/mechglue/g_seal.c
lib/gssapi/mechglue/g_sign.c
lib/gssapi/mechglue/g_store_cred.c
lib/gssapi/mechglue/g_unseal.c
lib/gssapi/mechglue/g_userok.c
lib/gssapi/mechglue/g_utils.c
lib/gssapi/mechglue/g_verify.c
lib/gssapi/mechglue/gssd_pname_to_uid.c
lib/gssapi/mechglue/mglueP.h
lib/gssapi/mechglue/oid_ops.c
lib/gssapi/spnego/gssapiP_spnego.h
lib/gssapi/spnego/spnego_mech.c
and the initial implementation of incremental propagation, including the following new or changed files:
include/iprop_hdr.h
kadmin/server/ipropd_svc.c
lib/kdb/iprop.x
lib/kdb/kdb_convert.c
lib/kdb/kdb_log.c
lib/kdb/kdb_log.h
lib/krb5/error_tables/kdb5_err.et
slave/kpropd_rpc.c
slave/kproplog.c
are subject to the following license:
Copyright © 2004 Sun Microsystems, Inc.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Kerberos V5 includes documentation and software developed at the University of California at Berkeley, which includes this copyright notice:
Copyright © 1983 Regents of the University of California.
All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Portions contributed by Novell, Inc., including the LDAP database backend, are subject to the following license:
Copyright © 2004-2005, Novell, Inc.
All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- The copyright holder's name is not used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Portions funded by Sandia National Laboratory and developed by the University of Michigan's Center for Information Technology Integration, including the PKINIT implementation, are subject to the following license:
COPYRIGHT © 2006-2007
THE REGENTS OF THE UNIVERSITY OF MICHIGAN
ALL RIGHTS RESERVEDPermission is granted to use, copy, create derivative works and redistribute this software and such derivative works for any purpose, so long as the name of The University of Michigan is not used in any advertising or publicity pertaining to the use of distribution of this software without specific, written prior authorization. If the above copyright notice or any other identification of the University of Michigan is included in any copy of any portion of this software, then the disclaimer below must also be included.
THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REGENTS OF THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS HEREAFTER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
The pkcs11.h file included in the PKINIT code has the following license:
Copyright 2006 g10 Code GmbH
Copyright 2006 Andreas JellinghausThis file is free software; as a special exception the author gives unlimited permission to copy and/or distribute it, with or without modifications, as long as this notice is preserved.
This file is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, to the extent permitted by law; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Portions contributed by Apple Inc. are subject to the following license:
Copyright 2004-2008 Apple Inc. All Rights Reserved.Export of this software from the United States of America may require a specific license from the United States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting.WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Apple Inc. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Apple Inc. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.
THIS SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The implementations of UTF-8 string handling in src/util/support and src/lib/krb5/unicode are subject to the following copyright and permission notice:
The OpenLDAP Public License
Version 2.8, 17 August 2003Redistribution and use of this software and associated documentation (“Software”), with or without modification, are permitted provided that the following conditions are met:
- Redistributions in source form must retain copyright statements and notices,
- Redistributions in binary form must reproduce applicable copyright statements and notices, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution, and
- Redistributions must contain a verbatim copy of this document.
The OpenLDAP Foundation may revise this license from time to time. Each revision is distinguished by a version number. You may use this Software under terms of this license revision or under the terms of any subsequent revision of the license.
THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND ITS CONTRIBUTORS “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OPENLDAP FOUNDATION, ITS CONTRIBUTORS, OR THE AUTHOR(S) OR OWNER(S) OF THE SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The names of the authors and copyright holders must not be used in advertising or otherwise to promote the sale, use or other dealing in this Software without specific, written prior permission. Title to copyright in this Software shall at all times remain with copyright holders.
OpenLDAP is a registered trademark of the OpenLDAP Foundation.
Copyright 1999-2003 The OpenLDAP Foundation, Redwood City, California, USA. All Rights Reserved. Permission to copy and distribute verbatim copies of this document is granted.
Marked test programs in src/lib/krb5/krb have the following copyright:
Copyright © 2006 Kungliga Tekniska H{No value for `odiaeresis'}gskolan
(Royal Institute of Technology, Stockholm, Sweden).
All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of KTH nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY KTH AND ITS CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL KTH OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Portions of the RPC implementation in src/lib/rpc and src/include/gssrpc have the following copyright and permission notice:
Copyright © 2010, Oracle America, Inc.All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of the “Oracle America, Inc.” nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright © 2006,2007,2009 NTT (Nippon Telegraph and Telephone Corporation). All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer as the first lines of this file unmodified.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY NTT “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NTT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright 2000 by Carnegie Mellon UniversityAll Rights Reserved
Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Carnegie Mellon University not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.
CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Copyright © 2002 Naval Research Laboratory (NRL/CCS)Permission to use, copy, modify and distribute this software and its documentation is hereby granted, provided that both the copyright notice and this permission notice appear in all copies of the software, derivative works or modified versions, and any portions thereof.
NRL ALLOWS FREE USE OF THIS SOFTWARE IN ITS “AS IS” CONDITION AND DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
Portions extracted from Internet RFCs have the following copyright notice:
Copyright © The Internet Society (2006).This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an “AS IS” basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Copyright © 1991, 1992, 1994 by Cygnus Support.Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. Cygnus Support makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.
Copyright © 2006 Secure Endpoints Inc.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Portions of the implementation of the Fortuna-like PRNG are subject to the following notice:
Copyright © 2005 Marko Kreen
All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright © 1994 by the University of Southern CaliforniaEXPORT OF THIS SOFTWARE from the United States of America may require a specific license from the United States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting.WITHIN THAT CONSTRAINT, permission to copy, modify, and distribute this software and its documentation in source and binary forms is hereby granted, provided that any documentation or other materials related to such distribution or use acknowledge that the software was developed by the University of Southern California.
DISCLAIMER OF WARRANTY. THIS SOFTWARE IS PROVIDED “AS IS”. The University of Southern California MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED. By way of example, but not limitation, the University of Southern California MAKES NO REPRESENTATIONS OR WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. The University of Southern California shall not be held liable for any liability nor for any direct, indirect, or consequential damages with respect to any claim by the user or distributor of the ksu software.
Copyright © 1995
The President and Fellows of Harvard UniversityThis code is derived from software contributed to Harvard by Jeremy Rassen.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- All advertising materials mentioning features or use of this software must display the following acknowledgement:
This product includes software developed by the University of California, Berkeley and its contributors.- Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright © 2008 by the Massachusetts Institute of Technology.
Copyright 1995 by Richard P. Basch. All Rights Reserved.
Copyright 1995 by Lehman Brothers, Inc. All Rights Reserved.
Export of this software from the United States of America may require a specific license from the United States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting.WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Richard P. Basch, Lehman Brothers and M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Richard P. Basch, Lehman Brothers and M.I.T. make no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.
The following notice applies to src/lib/krb5/krb/strptime.c:
Copyright © 1997, 1998 The NetBSD Foundation, Inc.
All rights reserved.This code was contributed to The NetBSD Foundation by Klaus Klein.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- All advertising materials mentioning features or use of this software must display the following acknowledgement:
This product includes software developed by the NetBSD Foundation, Inc. and its contributors.- Neither the name of The NetBSD Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The following notice applies to Unicode library files in
src/lib/krb5/unicode:
Copyright 1997, 1998, 1999 Computing Research Labs,
New Mexico State UniversityPermission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE COMPUTING RESEARCH LAB OR NEW MEXICO STATE UNIVERSITY BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
The following notice applies to src/util/support/strlcpy.c:
Copyright © 1998 Todd C. Miller <Todd.Miller@courtesan.com>Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS” AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
The following notice applies to src/util/profile/argv_parse.c and
src/util/profile/argv_parse.h:
Copyright 1999 by Theodore Ts'o.Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED “AS IS” AND THEODORE TS'O (THE AUTHOR) DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. (Isn't it sick that the U.S. culture of lawsuit-happy lawyers requires this kind of disclaimer?)
The following notice applies to SWIG-generated code in
src/util/profile/profile_tcl.c:
Copyright © 1999-2000, The University of ChicagoThis file may be freely redistributed without license or fee provided this copyright message remains intact.
The following notice applies to portiions of src/lib/rpc and
src/include/gssrpc:
Copyright © 2000 The Regents of the University of Michigan. All rights reserved.Copyright © 2000 Dug Song <dugsong@UMICH.EDU>. All rights reserved, all wrongs reversed.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Implementations of the MD4 algorithm are subject to the following notice:
Copyright © 1990, RSA Data Security, Inc. All rights reserved.License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc. MD4 Message Digest Algorithm” in all material mentioning or referencing this software or this function.
License is also granted to make and use derivative works provided that such works are identified as “derived from the RSA Data Security, Inc. MD4 Message Digest Algorithm” in all material mentioning or referencing the derived work.
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind.
These notices must be retained in any copies of any part of this documentation and/or software.
Implementations of the MD5 algorithm are subject to the following notice:
Copyright © 1990, RSA Data Security, Inc. All rights reserved.License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc. MD5 Message- Digest Algorithm” in all material mentioning or referencing this software or this function.
License is also granted to make and use derivative works provided that such works are identified as “derived from the RSA Data Security, Inc. MD5 Message-Digest Algorithm” in all material mentioning or referencing the derived work.
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind.
These notices must be retained in any copies of any part of this documentation and/or software.
The following notice applies to src/lib/crypto/crypto_tests/t_mddriver.c:
Copyright © 1990-2, RSA Data Security, Inc. Created 1990. All rights reserved.RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind.
These notices must be retained in any copies of any part of this documentation and/or software.
Portions of src/lib/krb5 are subject to the following notice:
Copyright © 1994 CyberSAFE Corporation.
Copyright 1990,1991,2007,2008 by the Massachusetts Institute of Technology.
All Rights Reserved.Export of this software from the United States of America may require a specific license from the United States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting.WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Furthermore if you modify this software you must label your software as modified software and not distribute it in such a fashion that it might be confused with the original M.I.T. software. Neither M.I.T., the Open Computing Security Group, nor CyberSAFE Corporation make any representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.
Portions contributed by PADL Software are subject to the following license:
Copyright (c) 2011, PADL Software Pty Ltd. All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of PADL Software nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY PADL SOFTWARE AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL PADL SOFTWARE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The bundled libev source code is subject to the following license:
All files in libev are Copyright (C)2007,2008,2009 Marc Alexander Lehmann.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Alternatively, the contents of this package may be used under the terms of the GNU General Public License ("GPL") version 2 or any later version, in which case the provisions of the GPL are applicable instead of the above. If you wish to allow the use of your version of this package only under the terms of the GPL and not to allow others to use your version of this file under the BSD license, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the GPL in this and the other files of this package. If you do not delete the provisions above, a recipient may use your version of this file under either the BSD or the GPL.