Received: by E40-PO.MIT.EDU (5.45/4.7) id AA08840; Thu, 8 Mar 90 04:13:34 EST Received: from WSMR-SIMTEL20.ARMY.MIL by ATHENA.MIT.EDU with SMTP id AA07981; Thu, 8 Mar 90 04:13:21 EST Message-Id: <9003080913.AA07981@ATHENA.MIT.EDU> Date: Thu, 1 Mar 90 14:07:40 BST From: "Info-IBMPC Digest" Reply-To: Info-IBMPC@WSMR-SIMTEL20.ARMY.MIL Subject: Info-IBMPC Digest V90 #37 To: "Info-IBMPC Distribution" Info-IBMPC Digest Thu, 1 Mar 90 Volume 90 : Issue 37 Today's Editor: Gregory Hicks - Chinhae Korea Today's Topics: File Transfer - Statement of Frustrations|| Kaypro PC Modem Cable Today's Queries: Adding a floppy disk to an AT EGA or VGA GRAPHICS screen dump? Maxon MVGA programming info Need help choosing high-end 386/486 machine. new virus, bug or what? Seeking EasyNet ShareLan Authors Windows 3.0 XT Hard Drives Send Replies or notes for publication to: Send requests of an administrative nature (addition to, deletion from the distribution list, et al) to: The Lending Library is available from: WSMR-SIMTEL20.ARMY.MIL (see file PD1:AAAREAD.ME details on file directories and descriptions.) Archives of past issues of the Info-IBMPC Digest are available by FTP only from WSMR-SIMTEL20.ARMY.MIL in directory PD2:. WSMR-SIMTEL20.ARMY.MIL can be accessed using LISTSERV commands from BITNET via LISTSERV@NDSUVM1, LISTSERV@RPIECS, LISTSERV@FINTUVM and in Europe from EARN TRICKLE servers. Send commands to TRICKLE@ (example: TRICKLE@TREARN). The following TRICKLE servers are presently available: AWIWUW11 (Austria), BANUFS11 (Belgium), DKTC11 (Denmark), DB0FUB11 or DTUZDV1 (Germany), IMIPOLI (Italy), EB0UB011 (Spain) TAUNIVM (Israel) and TREARN (Turkey). If you are unable to access SIMTEL20 via Internet FTP or through one of the BITNET/EARN file servers, most MSDOS SIMTEL20 files, including the PC-Blue collection, are available for downloading on the Detroit Download Central network at 313-885-3956. DDC is a networked system with multiple lines that support 300, 1200, 2400, and 9600 bps (HST). This system is a subscription system with an average hourly cost of 17 cents per hour. It is also accessable on Telenet via PC Pursuit and on Tymnet via StarLink outdial. New files uploaded to WSMR-SIMTEL20 are usually available on DDC within 24 hours. ---------------------------------------------------------------------- Date: Wed, 28 Feb 90 12:54:42 EST From: "John S. Fisher" Subject: File Transfer - Statement of Frustrations|| >This message is not indended to point any fingers. Instead, I would like this >to be used to raise issues that I have with the current state of receiving >SIMTEL MSDOS files via servers like RPIECS. > >Specifically, I would like to download the SIMIBM.ARC file on a Monthly? >basis. > >The file would then be downloaded to my Token Ring LAN and put into a DBASE >compatible database file for browsing by my Micro Support Staff. > >I have two major problems with the current support for SIMTEL file >transfers. First, when I try to /PDGET a file the size of SIMIBM.ARC, it is >sent to me in "chunks" of mail messages as opposed to a single file. I have >tried re-assembling the pieces into one chunk, stripping off the necessary >headers, download the new re-assembled file to the PC, and UUDECODING the >file. >This is a VERY time consuming task. I also have never been able to >sucessfully UUDECODE the file to it's original state. As you can imagine, >this can be quite frustrating. Since you are a VM/CMS site, much of the reassembly task can be simplified or stream-lined if you use the BITSEND option on the /PDGET command. For your case, /PDGET BITSEND PD:SIMIBM.ARC The SIMIBM.ARC file will still be sent in pieces, but armed with the BITSEND/BITRCV tools (available from your nearest NETSERV node) the reassembly process is one step without the need to uudecode the result. > >Secondly, I am only allowed 2 downloads / day. Also, the sum total of the >size of the two files CAN'T be > 150K. (...the first and therefore only request of the day may exceed 150K...) >I do realize the reason for these restrictions, but can't help to think that >something can be done. > >I've even tried to go directly to SIMTEL via BITFTP but received many reasons >why I shouldn't try. We don't have direct INTERNET access here, so BITFTP is >my only way of getting to INTERNET hosts. > >I can't imagine that I'm the only one who is frustrated with this. Am I doing >things wrong?? There's GOT TO BE A BETTER WAY||| If you have ideas about what can be done, I'd be more than happy to entertain them. With 9600 bps as the standard for inter-node links, I'd conservatively estimate the bandwidth from one node to the next at around 40Mb per day. (That allows for protocol overhead, line turnaround delays, line noise, and the occasional node outage.) At last check, the file SIMIBM.ARC is 229,359 bytes, a "meer" 1/2% of that total bandwidth. But, when the 1/2% gets multiplied by the number of requests coming to the server daily, you've got a single network service that is creating the lion's share of the Bitnet traffic and often causing undue congestion at several network pressure points. All is not forever lost, however. The Bitnet II architecture promises relief; unfortunately, the time-frame for this relief is not clear. /JSFisher ------------------------------ Date: Wed, 28 Feb 90 07:20:46 -0900 From: "Uncle Gomer" Subject: Kaypro PC Modem Cable Thanx to everyone who sent me schematics, etc. to build a modem cable for my Kaypro XT. Seems the previous cable I had worked, but the RTS/CTS pins had not been connected! Again...thanks to everyone who helped me solve this problem! === Geddy Lee === /s ------------------------------ Subject: Today's Queries: Date: 28 Feb 90 23:28:00 EST From: "VAN_OOSTROM" Subject: Adding a floppy disk to an AT I'm having trouble adding a 360K floppy drive to an AT compatible computer. I'm trying to add an Amstrad PT NO 40046 360K floppy drive to an AT compatible machine with a floppy controler that supports this drive. The drive originates from an Amstrad PC1512 XT compatible. I tried to put a DRIVPARM=/D:1 /T:40 /H:2 /S:9 statement in my config.sys file. The error message I get is 'drive not ready'. Questions: - Is it possible to put a XT type 360K floppy on an AT? - Is there anybody that can tell me anything about the jumper settings of this drive? - Is there anybody out there with an Amstrad PC1512 or PC1640? (in that case mail to me personally) My guess is that the problem has something to do with the change-line hardware, of which I'm not sure the drive supports. Hans van Oostrom PO Box J-254, JHMHC hans@ufpine (BITNET) Gainesville, FL 32601, USA hans@pine.circa.ufl.edu (INTERNET) {uunet, hp4nl, rutgers, harvard}!pine.circa.ufl.edu!hans (UUCP) ------------------------------ Date: Wed, 28 Feb 90 09:44 MDT From: Pete Klammer Subject: EGA or VGA GRAPHICS screen dump? Can anyone tell me what EGA or VGA equivalents to GRAPHICS.COM exist? I would like to do a graphics screen dump to an Epson printer, and GRAPHICS.COM (the one I have, anyway) only does CGA dumping. Thanks. /** --poko " I'm half Estonian, which makes up for the other half. " Pete Klammer /(303)556-3915 FAX:(303)556-4822 PKLAMMER@PIKES.COLORADO.EDU CU-Denver Computing Services / Campus Box 169 BITNET: PKLAMMER@CUDENVER 1200 Larimer St NC2506 / Denver CO 80204-5300 UU:!boulder!pikes!pklammer **/ ------------------------------ Date: Wed, 28 Feb 90 13:42:26 EST From: jrv@sdimax2.mitre.org Subject: Maxon MVGA programming info I just bought a Maxon MVGA-16 card, and am happy about the way it works. Now I would like to learn how to use its extended modes (hex numbers 50 and up, as I remember), particularly the one with 640*480*256 colors. I called Maxon for programming information, as suggested by the owner's manual, but was told that the project to create the programmer's manual had been cancelled and that no manual would ever be available! Apparently the drivers that came with it (for Autocad and several other programs I can't afford) are the only ones I can expect to use. This hardly seems a good way to exploit a competitive advantage (i.e. the extended modes). On the other hand, the Maxon card uses the Trident VGA chipset, and I was told the hardware- and BIOS-level interfaces should be "similar" to other cards using that chipset. (He refused to tell me what those other cards were, or to give me a contact at Trident.) Do any readers of this list have programming info on this card, or any other card with the Trident chipset? Does anyone have a .BGI file for Turbo C that will use the extended modes? - Jim Van Zandt ------------------------------ Date: 1 Mar 90 00:42:35 GMT From: catone@dsl.cis.upenn.edu (Tony Catone) Subject: Need help choosing high-end 386/486 machine. Hi. One of our departments wants to purchase a high end PC compatible to test out various new software and operating systems of interest, like OS/2 with Presentation Manager, X-Windows, Windows/386, Xenix, high end relational databases like Oracle/Informix/Ingres/etc., and so on. We proposed a 33 MHz 386 box with all the usual accessories: VGA, 360 meg ESDI hard disk, 4 Megs of RAM, cache memory, 387 coprocessor, and so on. The question arose, why not go straight for a 486 system? Last I heard, the 486 was too buggy right now to be trusted, but that was a while back. Also, the new EISA (Extended Industry Standard Architecture) machines should offer much improved throughput, but the last I read they would not be commonly available until summer. What do you think? 386 or 486? Buy now or wait for an EISA box? What specific systems do you recommend, either 386 or 486, and why one over the other? What systems have you had experience with? It would also be helpful if you could indicate what sort of processing you did on the system, to give me some basis of comparison: as we all know, a system that's fast for word processing isn't necessarily fast for database work. Please reply either by mail or posting; I will collect all replies and post a summary to the group afterwards. Thanks for the help! - Tony catone@dsl.cis.upenn.edu catone@wharton.upenn.edu ------------------------------ Date: Thu, 1 Mar 90 08:49 N From: Subject: new virus, bug or what? I have a Olivetti M260 in my office. about a month ago while running Word Perfect 5.0 my screen suddenly "jumped" and at first I thought that all my set-up settings (screen shades of grey etc) were changed. As it turned out (as far as I know!) only my choice of measurement units (centimetres) had been changed to row and column and the auto-save feature had been turned on -- and timed for 10 minutes. I fixed these things up and have worked happily ever since. Today I gave a disk to my secretary containing a letter to be fixed up into format etc. before being sent. While she was working on it the same thing happened to her. She has a Olivetti M-24, she runs WP5.0 Dutch language version and mine is English English language version. She has a 20Mb hard disk and a Mono-Borsu while I have a Conel 20Mb hardcard. Our University hardware/software PC support staff have never heard of such a thing happening. My question is there a known virus or a known bug in WP5.0 that would result in the symptoms I have described. What has happened is troublesome but not (yet) trouble. It is what will happen next that has us worried. Perhaps I should add that I have another Olivetti M-24 with Conel 20 Mb hardcard at home with WP 5.0 English English it and the problem has not occurred there (yet) even though programmes and text are transferred between my two machines daily. I bother this list only because I suspect an un-reported virus which would have to be able to transmit itself in data (text) as that is the only thing ever transported between my secretary's machine and mine. Regards, K.E. Rosing Bitnet: ROSING@HROEUR5 Mail : Economisch Geografisch Instituut Erasmus Universiteit P.O. Box 1738 NL-3000 DR Rotterdam Netherlands Tel : 10 4081456 Fax : 10 4527009 [Although I'm not a virus expert, I DON'T think this is possible... gph] ------------------------------ Date: 16 Feb 90 17:28:30 GMT From: TRL3@psuvm.psu.edu (Tim Larson) Subject: Seeking EasyNet ShareLan Authors I recently downloaded EasyNet ShareLan from simtel20.arpa. This seems to be a very nice RS-232 based network, but when I tried to contact the authors listed in the docs, they were no longer at the number listed. If anyone knows how to contact the owners of the copyright, could you email me their address or (preferably) their phone number? The authors listed in the docs were: EasyNet Systems Inc. 4283 Village Centre Court Mississauga, Ontario L4Z 1S2 (416) 273-6410 There were references also to upgrades to a NOS that supports up to 35 PCs and also to low-cost NICs. Any references or comments on the software would be appreciated. -Tim Larson trl3@psuvm.bitnet ------------------------------ Date: Thu, 01 Mar 90 00:11:56 CST From: ST6074%SIUCVMB.BITNET@UICVM.uic.edu (Tim Williams) Subject: Windows 3.0 Can anyone tell me when Windows 3.0 will be released? I've been hearing about it for about 3 or 4 months now, but haven't heard of anything official from Microsoft. Have they released any dates, or any verified specs on it? Also, will registered 2.11 owners get a free upgrade, or what will their policy be? Thanks, Tim Williams Southern Illinois University at Carbondale ------------------------------ Date: Wed, 28 Feb 90 22:46:45 -0500 (EST) From: John Duchowski Subject: XT Hard Drives Hi there, I seem to be running into problems with a hard drive in one of our XTs. It started acting up, i.e., could not be accessed and then chkdsk and subsequently PCShell reported corrupted FAT. So, my first question is: 1. Is it really and *finally* dead and is there anything that we could do to fix it or recover any data from it. Secondly, couple of questions came up after we tried some household remedies, such as low level format (fdisk), XT diagnostics (IBM) and IAU19 utilities: 2. Are ATs and XTs really different in the way they "perceive" the presence of a hard drive ? For example, upon running diagnostics the computer "knew" that it did have the hard drive, though it came back with error 1704 (whatever that may mean - the IBM manula was not very explicit). However, after removing DOS partition with fdisk, DOS command "dir c:" or "format c:" would give "invalid drive specification". Nevertheless, the XT diagnostics and IAU19 could still access and do work on the drive. 3. Having experienced similar problems in one of our ATs, where the drive did turn out to be dead and unsalvagable, is essential- ly what is happening here ? And, finally, 4. What should we consider, especially in view of (2) if we were going to get a new drive ? Is installation of a new drive in in XT as (relatively) simple as it is in an AT, i.e., just a matter of (essentially) running the diagnostics and informing the computer of the drive type ? Thanks for any hints, suggestions and comments to all netlanders "out there", Sincerely, John Duchowski ------------------------------ End of Info-IBMPC Digest ************************ -------