2014
Chou, J. B., Yeng, Y. X., Lee, Y. E., Lenert, A., Rinnerbauer, V.,
Celanovic, I., SoljaĊić, M., Fang, N. X., Wang, E. N. and Kim, S.-G "
Enabling Ideal Selective Solar Absorption with 2D Metallic Dielectric Photonic
Crystals " Advanced Materials, doi: 10.1002/adma.201403302
J. Chou, Y. X. Yeng, A. Lenert, V. Rinnerbauer , I. Celanovic, M.
Soljacic , E. N. Wang, and S.G. Kim, “Design of Wide-Angle Selective
Absorbers/Emitters with Dielectric Filled Metallic Photonic Crystals for Energy
Applications,” Optics Express, Vol. 22, Issue S1, pp. A144-A154 (2014)
G. Gafforelli
, R. Xu, A. Corigliano and S. G. Kim, “Modeling of a bridge-shaped nonlinear piezoelectric
energy harvester, J. Energy Harvesting,
in press, 2014**
Y. X. Yeng, J. Chou, V. Rinnerbauer , Y. Shen, S.G. Kim, J. D.
Joannopoulos, M. Soljacic , I. Celanovic, “Global optimization of
omnidirectional wavelength selective emitters/absorbers based on
dielectric-filled anti-reflection coated two-dimensional metallic photonic
crystals,” Optics Express, Vol. 22, No.18 (2014)
K. Smyth and S.G. Kim, “Experiment and Simulation Validated Analytical
Equivalent Circuit Model for Piezoelectric Micro-Machined Ultrasonic
Transducer,” IEEE Transactions on Ultrasonics Ferroelectrics and Frequency
Control, accepted for publication**
G. Gafforelli,
A. Corigliano, R. Xu and S. G. Kim, “Experimental verification of a bridge-shaped
nonlinear vibration energy harvester, Applied Physics Letters, accepted for
publication
Jeffrey Chou, Sang-Gook Kim, “Omnidirectional, spectrally selective,
wafer-scale fabricated metallic diectric 2-D photonic crystals for high
temperature energy conversion,” Solid-State Sensor and Actuator Workshop,
Hilton Head, SC, 2014
K. Smyth, S.G. Kim, “Piezoelectric Micro-machined Ultrasonic Transducers
for Medical Monitoring,” MRS Spring Meeting, San Francisco, 2014 (invited)**
G. Gafforelli
, R. Xu, A. Corigliano and S. G. Kim, “Experimental verification of a bridge-shaped,
non-linear vibration energy harvester”, IEEE Sensors 2014, Valencia, Spain
Jeffrey Chou, Sang-Gook Kim, “Solar Broadband Metal Absorption in
Anti-Reflection Coated 2D Metallic Dielectric Photonic Crystals for Solar
Thermal Energy Conversion” MRS Fall meeting 2014, Boston
M. Marchesi, J.E, Fernandez, D. T. Matt and S.G. Kim, “Axiomatic
Approach for the Conceptual Design of Sustainable Buildings,” 8th International
Conference on Axiomatic Design, Portugal, 2014
H.J Lee and S.G. Kim, “Design of Thermally Stable 2D Photonic
Crystals for Thermophotovoltaic Systems,” 8th International Conference on Axiomatic Design, Portugal,
2014
S. Bathurst and S.G. Kim, “Axiomatic Design of Drop on Demand Deposition
Process for Sol-Gel PZT,” 8th
International Conference on Axiomatic Design, Portugal, 2014
R. Xu and S.G. Kim, “MEMS energy harvesting from low frequency and low-g
vibrations,” MRS Spring Meeting, San Francisco, 2015
2013
F. Sammoura
and S.G. Kim, “Optimizing the Electrode Size of Circular Bimorph Plates with
Different Boundary Conditions for Maximum Deflection of Piezoelectric
Micromachined Ultrasonic Transducers,” Ultrasonics, v 53, P 328-334, 2013
S. Bathurst
and S.G. Kim, “Printing of Uniform PZT Thin Films for MEMS Applications,” CIRP Annals -Manufacturing, Vol. 62, No.
1, 2013
K. Smyth,
F. Sammoura, S. Bathurst and S.G. Kim, “Analytic Solution for N-electrode
actuated Piezoelectric Disk with Application to Piezoelectric Micromachined
Ultrasonic Transducers,” IEEE Transactions on Ultrasonics Ferroelectrics and
Frequency Control, Vol. 60, No. 8, 2013
H. Lee, K.
Smyth and S.G. Kim, "Nanostructures which can survive the high temperature
solar energy applications," Nanotechnology for Solar Energy Collection and
Conversion - NNI Signature Initiative Symposium, Washington D.C., 2013
R. Xu and
S.G. Kim, “Wide Bandwidth Piezoelectric MEMS Energy Harvesting,” MRS Spring
Meeting, San Francisco, 2013
K. Smyth,
F. Sammoura, and S. G. Kim, "An Accurate Equivalent Circuit for the
Clamped Circular Multiple-Electrode PMUT with Residual Stress," 2013
IEEE International Ultrasonics Symposium (IUS), Prague, Czech Republic,
(Oral presentation)
H.J. Lee,
K. Smyth, S. Bathurst, J. Chou, M. Ghebrebrhan, N. Saka and S.G. Kim,
"Hafnia-plugged microcavities for thermal stability of selective
emitters", Applied Physics Letters, 102, 241904 2013
F. Sammoura, K. Smyth and S.G. Kim, “An Equivalent Network Representation
of a Clamped Bimorph Piezoelectric Micromachined Ultrasonic Transducer with
Circular and Annular Electrodes using Matrix Manipulation Techniques,” IEEE
Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol. 60, No.
9, p 1989, 2013
Marianna
Marchesi, S.G. Kim, J. Fernández and D. T. Matt, “Analysis of a
Successful Architectural Design Based on Axiomatic Design Approach,
International Workshop on Design in Civil & Environmental Engineering, Worcester,
MA, 2013
Marianna
Marchesi, S.G. Kim and D. T. Matt, “Applications of Axiomatic
Design Approach to the Design of Architectural Systems: a Literature Review, International Conference on
Axiomatic Design, Worcester, MA, 2013
Jeffrey Chou,
Katherine Smyth, Sang-Gook Kim, “Low Aspect Ratio Nanophotonic Filled Cavities
with Q-Matching for Scalable Thermophotovoltaic Power Conversion,” IEEE
Photonics Conference 2013, Bellevue, WA (oral)
Sang-Gook Kim, “How to Make
Energy Nanostructures Survive High Temperatures?” US-Korea Conference, 2013,
East Rutherford, NJ (invited)
Jeffrey
Chou, Katherine Smyth, Sang-Gook Kim, “HfO2 Plugged Optical
Nanostructures for High Temperature Photonic and Plasmonic Applications,” ASME
Society-Wide Micro and Nanotechnology Forum, IMECE 2013, San Diego, CA
2012
F. Sammoura
and S.G. Kim, “Theoretical Modeling and Equivalent Electric Circuit of a
Bimorph Micromachined Ultrasonic Transducer,” IEEE Transactions on Ultrasonics
Ferroelectrics and Frequency Control, Vol. 59, No. 5, Page 990, 2012
De Volder M., Decoster J., Reynaerts D., Van Hoof C., Kim SG, High Damping Carbon Nanotube Hinged
Micromirrors, Small, 2012
S.G. Kim,
S. Priya, I. Kanno, “Piezoelectric MEMS for Energy Harvesting,” MRS Bulletin,
V. 37, p.1039, 2012
S.G. Kim,
S. Bathurst and F. Sammoura, “Design Framework for Micro and Nano-scale
Products,” 22nd CIRP Design Conference, Bangalore, India, 2012
(invited)
B. Commeau,
R. Karnik, S.G. Kim, “Development and Growth of an Undergraduate Micro/Nano
Engineering Laboratory Course,” ASEE Annual Conference, 2012
F. Sammoura
and S.G. Kim, “Modeling of the Neutral Axes of a Circular Piezoelectric
Micromachined Transducer in Transmit and Receive Mode,” Solid-State Sensor
and Actuator Workshop, Hilton Head, SC, 2012
K. Smyth,
F. Sammoura, S.G. Kim, “Modeling and Optimization of Electrode Configuration
for Bimorph and Unimorph Piezoelectric Micro-Machined Ultrasonic Transducers
(PMUTs), International Workshop on Acoustic Transduction Materials and Devices,
PA, 2012
H. Lee, S.
Bathurst and S.G. Kim, "Thermal Stability of Nano-Structured Selective
Emitters for Thermo Photovoltaic," TechConnect World, Santa Clara, CA,
2012
F.
Sammoura, K. Smyth, S.G. Kim, “Working Equations of a Circular Multimorph
Piezoelectric Micromachined Ultrasonic Transducer,” IEEE Industrial Electronics
Society (IECON 2012), Montreal, Canada, 2012
F.
Sammoura, K. Smyth, S.G. Kim, “An Analytical Analysis of the Sensitivity of
Plate Deflection and Bandwidth of Circular Piezoelectric Micromachined
Ultrasonic Transducers (PMUTs) to Residual Stress,” IEEE International
Ultrasonics Symposium (IUS), Dresden, Germany, 2012
H. Lee, S.
Bathurst and S.G. Kim, “Thermally Stable Two-Dimensional Photonic Crystal for
Selective Emitters”, MRS Fall Meeting, Boston, 2012
R. Xu and
S.G. Kim, “Figures of Merit (FOMS) of Piezoelectric Materials in Energy
Harvesters,” POWER MEMS 2012, Atlanta, GA, 2012 (Poster Presentation)
2011
A. Hajati
and S.G. Kim, “Design and Fabrication of a Nonlinear Resonator for Ultra Wide
Bandwidth Energy Harvesting Applications,” IEEE MEMS 2011, Cancun,
Mexico, 2011
A. Hajati
and S.G. Kim, “Nonlinear Resonator for Ultra Wide Bandwidth Energy Harvesting,”
Mater. Res. Soc. Symp. Proc., San Francisco, 2011 (invited)
A. Hajati
and S.G. Kim, “Ultra Wide Bandwidth Piezoelectric Energy Harvesting,” Applied
Physics Letters, 99, P. 083105, 2011
De Volder M., Decoster J., Reynaerts D., Van Hoof C., Kim SG, High Damping Carbon Nanotube Hinged
Micromirrors, Small. doi: 10.1002/smll.201102683
Bathurst,
S., S.-G. Kim, “MEMS by inkjet printing and the impact of processing decisions
on MEMS device manufacturing,” Technologies for Future Micro and Nano
Manufacturing Workshop, Napa CA, 2011
R. Xu, A.
Hajati and S.G. Kim, “Wide Bandwidth Piezoelectric Micro Energy Harvester Based
on Nonlinear Resonance,” POWER MEMS 2011, Seoul, Korea, 2011 (Oral
Presentation)
H. Lee, S.
Bathurst, S.G. Kim, Thermal Stability of Nano-Structured Tungsten Selective
Emitters, MRS Fall meeting 2011, Boston
2010
J. Peck, S-G. Kim, “Improving Patient Flow through Axiomatic
Design of Hospital Emergency Departments,” Journal of Manufacturing Science and
Technology, accepted, 2010
J. Peck, D. Nightingale, S-G. Kim, “Axiomatic
approach for efficient healthcare system design and optimization,” CIRP Annals - Manufacturing Technology, accepted, 2010
H. J. In, H. W. Lee, and S-G Kim,
G. Barbastathis, “Nanomanufacturing of
Carbon Nanotubes on Titanium Nitride,” Int. J. of Nanomanufacturing, Vol. 6,
No. 1-4, Page 46-54, 2010
Schlipf M.,
Stephen B., Kippenbrock K., Kim S.-G., Lanza G.,“On the
structured Approach to Design and Integrate MEMS and Precision Engineering
Systems” Journal of Manufacturing Science and Technology, v.3, p.236, 2010
2009
S. H. Kim, H. W. Lee and S.G. Kim, “Integration of Carbon Nanotubes into MEMS Devices via Deterministic Transplanting,” IEEE MEMS 2009, Sorrento, Italy, 2009
S. Bathurst and S.-G. Kim, “Designing
Direct Printing Process for Improved Piezoelectric Micro Devices,” Annals of
the CIRP (Int’l Academy for Production Engineering)
J. Peck, S-G. Kim, “Improving Patient Flow
Through Axiomatic Design of Hospital Emergency Departments,” CIRP Design
Conference, Cranfield, UK, 2009
S. Bathurst, H.W. Lee, and S.G. Kim,
“Design Against The Coupled Nature Of PZT Spin Coating,” 5th International Conference
on Axiomatic Design, Portugal 2009
J. Peck, E. Kolb, T. Lee and S.G. Kim, “Lessons Learned by Applying Axiomatic
Design to an Emergency Department,” 5th International Conference on Axiomatic Design, Portugal 2009
H. J. In, H. W. Lee, and S-G Kim, G.
Barbastathis, “Nanomanufacturing of Carbon Nanotubes on Titanium Nitride,” Int.
J. of Nanomanufacturing, 2009
S. H. Kim, H. W. Lee and S.G. Kim,
“Assembly of Individual Nanostructures to Micro Devices,” 6th Annual Conference
on Foundations of Nano Science: Self-Assembled Architectures and Devices (FNANO
2009), Snowbird, Utah, 2009
Sang-Gook Kim, Multi-scale Assembly:
Design, Processes and Complexity, In; Nanomanufacturing, S. Chen, Ed., American
Scientific Publishers, 2009
S. Kim, H.W. Lee and S-G. Kim,
"Transplanting Assembly of CNT-tipped AFM Probes,” Applied Physics
Letters, Vol. 94, No. 19,
pp.193102, 2009 (also in Virtual Journal of Nanoscale Science & Technology,
19, Issue 21, May 25, 2009)
A. Hajati and
S.G. Kim, Energy Harvesting Piezoelectric MEMS Devices for Self-Supportive
Wireless Sensors, Proceedings of the 9th International Workshop on Micro and
Nanotechnology for Power Generation and Energy Conversion Applications, Power
MEMS 2009, Washington D.C., 2009
2008
S. G. Kim, Z. Traina and H. Lee, “Folding Assembly of Microactuators”, CIRP Annals -Manufacturing Technology, Vol. 57, 2008
H.J. In, H. W. Lee, S. G. Kim, and G.
Barbastathis, “Carbon nanotube-based magnetic actuation of origami membranes,”
Journal of Vacuum Science and Technology B, Vol. 26, Issue 6, pp. 2509-2512,
2008
S. Bathurst, H.W. Lee and S.G. Kim,
“Direct Printing of Lead Zirconate Titanate Thin Films,” IEEE MEMS 2008, Tucson,
AZ, 2008
A. Hajati and S.G. Kim, “Rectifierless
Piezoelectric Micro Power Generator,”, SPIE Smart Structures and Materials
& Nondestructive Evaluation and Health Monitoring 2008, San Diego, CA, 2008
Arman Hajati and Sang-Gook Kim, Energy
Harvesting Piezoelectric MEMS Devices for Self-Supportive Wireless Sensors,
Proceedings of Innovation Conference NSF Engineering Research, Knoxville,
Tennessee, 2008
Sang-Gook Kim, “Complexity of Assembly at
Micro and Nano Scales: Axiomatic Approach,” SAE World Congress 2008 (invited),
Chicago 2008
S. Bathurst, J. Jeon, H.W. Lee and S.G.
Kim, ”PZT MEMS by Thermal Ink Jet Printing,” Solid-State Sensor and Actuator
Workshop, Hilton Head, SC, 2008
H. J. In, A .J. Nichol, H. W. Lee, S. G.
Kim, G. Barbastathis, “Carbon Nanotube-Based Magnetic Actuation of Origami
Membranes,” Proc. International Conference on Electron, Ion and Photon Beam
Technology and Nanofabrication, Portland, OR, 2008
J. Peck and S.G. Kim, “Improving Emergency
Department Patient Flow through Optimal Fast Track Usage,” ACEP Research Forum,
American College of Emergency Physicians Scientific Assembly, Chicago, IL, 2008
Bathurst, S., Jeon, J. Lee, H.W. and S.-G.
Kim, “Ink Jet Printing of PZT Thinfilms for MEMS Applications,” Digital
Fabrication, Pittsburgh, PA., 2008 (selected as a Focal Presentation)
S. H. Kim, H. W. Lee and S.-G. Kim, "
Deterministic Transplanting Assembly of Individual Carbon Nanotubes to MEMS
Cantilevers," International Conference on Miniaturized Systems for
Chemistry and Life Sciences (µTAS), San Diego, CA, 2008
N. Reticker-Flynn, H. W. Lee and S.-G.
Kim, "Printing of Temperature Sensitive Hydrogel for Compact Microfluidic
Valves," International Conference on Miniaturized Systems for Chemistry
and Life Sciences (µTAS), San Diego, CA, 2008
H. W. Lee, S. H. Kim and S.-G. Kim,
“Effective Parameters For Growing Vertically-Aligned Individual Freestanding
Carbon Nanotubes/Nanofibers (CNs) using Plasma Enhanced Chemical Vapor
Deposition (PECVD)”, Mater. Res. Soc. Symp. Proc. Boston, MA, 2008
S. H. Kim, H. W. Lee and S.-G. Kim,
“Double Polymeric Layer Encapsulation Process for Transplanting Assembly of
Carbon Nanotubes into MEMS,” Mater. Res. Soc. Symp. Proc. Boston, MA, 2008
H. W. Lee, H. J. In, G. Barbastathis, and
S-G Kim, “Growth of Single Strand Carbon Nanotube Arrays on Foldable Titanium
Nitride Membranes,” Mater. Res. Soc. Symp. Proc. Boston, MA, 2008
H. J. In, H. W. Lee, and S-G Kim, G.
Barbastathis, “Nanomanufacturing of Carbon Nanotubes on Titanium Nitride,” 6th
International Symposium on Nanomanufacturing, Athens, Greece, Nov. 12-14, 2008
2007
N. J. Conway, Z. Traina and S. G. Kim, “Strain
amplifying piezoelectric MEMS actuator,” Journal of Micromechanics and
Microengineering, Vol. 17, P. 781, 2007
Z. Traina
and S. G. Kim, “Muscle-inspired Linear Actuator via Folding Assembly of MEMS
Actuators,” Proc. US-Korea Conference 2007, Intelligent Robot Symposium,
Washington D.C., 2007
J. Peck,
E. Kolb, T. Lee and S.G. Kim, “Towards sustainable, efficient operations of an
emergency department,” First Annual Operations Research in Health Care
Conference, Cambridge, MA, May, 2007
2006
S. G. Kim, "Transplanting Assembly of
Carbon Nanotubes", Annals of the CIRP, Vol. 55, No. 1, 2006
C.
Mueller-Falcke, S. D. Gouda, S. Kim, S. G. Kim, “A Nanoscanning Platform for
Bio Engineering: In-plane Probe for Switchable Stiffness,” Nanotechnology, 17,
S69-S76, 2006
W.-C. Shih,
S.-G. Kim, and G. Barbastathis, “High Resolution Electrostatic Analog Tunable
Grating with a Single-Mask Fabrication Process,” Journal of MicroElectroMechanical
Systems, Vol. 15, No 4, P 763, 2006
S. Xu, Y.
Shi, S-G. Kim, “ Fabrication and Characterization of Nano PZT Fibers,”
Nanotechnology, 17, P. 4497, 2006
W. J. Choi,
Y. Jeon, J-h Jeong, R. Sood and S. G. Kim, “Energy harvesting MEMS devices based
on thin film piezoelectric cantilevers,” Journal of Electroceramics, accepted
for publication
J. Ueda, L.
Odhner, S.G. Kim, H.H. Asada, “Local Stochastic Control of MEM-PZT Cellular
Actuators with Broadcast Feedback,” IEEE BioRobotics, Oral Presentation, Pisa,
Italy, Feb. 2006
S. G. Kim, “Complexity in Nanomanufacturing”, Proc. of International
Conference on Axiomatic Design, Firenze, Italy, June, 2006
Y. Shi, X. Zhang, S. Xu, and S.G. Kim, “Fabrication and Process
Characterization of Piezoelectric Nano Fiber Composites”, Proc. of ASME
Multifunctional Nanocomposites Insternational Conference, Honolulu, Hawaii,
USA, , September, 2006
R. Xia, C. Farm, W. Choi, and S.-G. Kim, “Self-Powered Wireless Sensor System
using MEMS Piezoelectric Micro Power Generator,” Proc. IEEE Sensors 2006,
Daegu, Korea 2006 (Oral Presentation)
S. Gouda, S.H. Kim, H.W. Lee and S.-G. Kim, “Transplanting Assembly of Single
Strand Carbon Nanotubes,” Int’l Symposium in Nano Manufacturing, Cambridge,
2006
Y. Shi, S. Xu, X. Zhang and S.-G. Kim, ”Piezoelectric Nanofiber and Their
Composites for Micro/Nano Active Structures,” Int’l Symposium in Nano
Manufacturing, Cambridge, 2006
S.-G. Kim, “Complexity of MEMS and Multi-scale Systems,” IDW (Int’l Display
Workshop) 2006, Ohtsu, 2006 (invited)
S. G. Kim, George Barbastathis and Harry
Tuller, "Optical MEMS" in "Electroceramic MEMS N.letter",
ed., Springer, 2005 (Book Chapter)
Y.B. Jeon, R. Sood, J.H. Jeong and S.G.
Kim, “Piezoelectric Micro Power Generator for Energy harvesting,” Sensors and
Actuators A: Physical, 122,
No. 1, P16, 2005
N. DuToit, Wardle. B. L. and S. G. Kim,
"Design Considerations for MEMS-scale Piezoelectric Mechanical Vibration Energy
Harvesters", Integrated Ferroelectrics, Vol. 71, P. 121, 2005
W.-C. Shih,
S.-G. Kim, and G. Barbastathis,“High Resolution Electrostatic Analog Tunable
Grating with a Single-Mask Fabrication Process,” Journal of
MicroElectroMechanical Systems, accepted for publication
W. J. Choi,
Y. Jeon, J-h Jeong, R. Sood and S. G. Kim, “Energy harvesting MEMS devices
based on thin film piezoelectric cantilevers,” Journal of Electroceramics,
accepted for publication
S. R. T. Kumara, S. G. Kim, X. Zhang and
S. Bukkapatnam, "Self-Sustainable Sensor Networks for Infrastructure and
Process Integrity Monitoring", Proc. NSF DMII Grantees' Conference,
Scottsdale, January 2005
Y. Shi and S.G. Kim, “A Lateral,
Self-cleaning, Direct-contact MEMS Switch,” IEEE MEMS 2005, Miami, FL
S. G. Kim, "Assembly of Carbon
Nanotubes: A Mechanical Way", NDSI 05 (Second Conference on Nanoscale
Devices and System Integration, IEEE Nano technology Council, Houston, April
2005 (Invite
Y. Shi and
S. G. Kim , “Critical Process Issues in the Fabrication of A Lateral,
Self-cleaning, MEMS Switch”, MRS Spring Meetings 2005, San Francisco, CA, March
2005
S. R.T. Kumara, S-G Kim, X. Zhang and S. Bukkapatnam, "Self-Sustainable
Sensor Networks for Infrastructure and Process Integrity Monitoring,"
Department of Homeland Security Conference, Working Together: Research &
Development Partnerships in Homeland Security, Boston, April 2005
W. J. Choi,
Y. Jeon, J-h Jeong, R. Sood and S. G. Kim, “Energy harvesting devices based on
d33 mode Pb(Zr,Ti)O3 thin film cantilevers,” Proc. Int’l Conference on
Electroceramics, Seoul, Korea, June, 2005 (Invited)
W. J. Choi and S. G. Kim, “Energy harvesting MEMS device based on thin film
piezoelectric cantilevers,”2nd International Workshop on Networked Sensing
Systems, INSS 2005, San Diego, CA, June 2005
C. Mueller-Falcke, S. D. Gouda, S. Kim and S. G. Kim, “A Nanoscanning Platform
for Bio Engineering,” the First International Conference on
Bio-Nano-Informatics(BNI) Fusion, Marina del Rey, CA, July 2005
Y. Shi and S. G. Kim , “Micro Undulated Contact Surfaces on the Contact
Behavior of a MEMS Switch,” Proc. World Tribology Congress, Washington D.C.,
Sep. 2005
Y. Shi, S.
Xu and S. G. Kim, “Partially Aligned Piezoelectric Nanofibers by Sol-Gel
Electrospinning Porcess,” Proceedings of ASME Integrated Nanosystems
Conference, September 2005, Berkeley, CA (oral presentation)
C.
Mueller-Falcke, S. D. Gouda, S. Kim and S. G. Kim, “Switchable Stiffness
Nanoscanning Probes for Biological Applications,” Ninth International
Conference on Miniaturized Systems for Chemistry and Life Sciences (µTAS),
Boston, MA, Oct. 2005
Sang-Gook
Kim, “Transplanting Carbon Nanotubes,” ASME IMECE 2005, Nanomanufacturing -
Materials, Processes, and Devices, Orlando, FL, Nov. 2005 (Invited)
Y. Shi, S.
Xu, S. G. Kim and M. Libera, “Structural Characteristics and Piezoelectric
Properties of Electrospun Piezoelectric Nanofibers”, MRS Fall Meetings 2005,
Boston, MA, Nov. 2005
S. G. Kim, G. Barbastathis and H. L.
Tuller, "MEMS for Optical Functionality", Journal of Electroceramics,
12, 133-144, 2004
C. W. Wong, P. T. Rakich, S. G. Johnson,
M. Qi, H. I. Smith, G. Barbastathis, L. C. Kimerling, and S. G. Kim,
"Strain-tunable Silicon Photonic Band Gap Microcavities in Optical
Waveguides", Appl. Phys. Lett., Vol. 84, P.1242, 2004
- also in Virtual Journal of Nanoscale Science & Technology, Vol. 9, Issue
8, March 1, 2004
C. W. Wong, Y. B. Jeon, G. Barbastathis,
and S. G. Kim, "Analog Piezoelectric-driven Tunable Gratings with
Nanometer Resolution", IEEE Journal of MicroElectroMechanical Systems, Vol
13, No. 6, 2004
T. El-Aguizy, J-h Jeong, Y. B. Jeon, W. Z.
Li, Z. F. Ren, and S.G. Kim, "Transplanting Carbon Nanotubes",
Applied Physics Letters, Vol 85, No. 25, P.5995, 2004
- also in Virtual Journal of Nanoscale Science & Technology, Vol., Issue,
December 20, 2004
Y.B. Jeon,
C. W. Wong, and S. G. Kim, "Water-immersible micromachined Pb(Zr,Ti)O3
thin film actuator", Journal of Electroceramics, 13, P509, 2004,
N. J. Conway and S. G. Kim, "Large-strain, Piezoelectric, In-plane
Micro-actuator", IEEE MEMS 2004, Maastricht, Netherlands, January
2004
R. Sood, Y. B. Jeon, J. H. Jeong, and S.
G. Kim, "Piezoelectric Micro Power Generator for Energy harvesting",
Proc. of Solid-State Sensor and Actuator Workshop, Hilton Head, South Carolina,
June, 2004
S. G. Kim, "Axiomatic Design of
Multi-scale Systems”, Proc. of International Conference on Axiomatic Design,
Seoul, June, 2004
Wardle, B. L., N. DuToit, and S.-G. Kim,
“Design Considerations for MEMS-scale Piezoelectric Energy Harvesters”, XIII
International Materials Research Congress (IMRC), August, Cancun, 2004
T. El-Aguizy, S. G. Kim, "Large-scale
Assembly of Carbon Nanotubes", Proceedings of ASME Integrated Nanosystems
Conference : Design, Synthesis & Applications, September 22-24, 2004
Pasadena, California
Clemens Mueller-Falcke, Yong-Ak Song and
S. G. Kim, “Tunable Stiffness Scanning Microscope Probe,” Optics East,
Philadelphia, PA, October, 2004
2003
Chee-wei Wong, Yongbae Jeon, G.
Barbastathis and S. G. Kim, "Analog tunable gratings driven by thin-film
piezoelectric MicroElectroMechanical actuators", Applied Optics, Vol. 42,
No. 4, 2003
W. C. Shih, C. W. Wong, Y. B. Jeon, S. G.
Kim, G. Barbastathis, "MEMS Tunable Gratings with Analog Actuation",
Information Sciences, 149, pp. 31-40, 2003
S.G. Kim, C. Wong and Y. Jeon,
"Strain-tuning of Optical devices with Nanometer Resolution", Annals
of the CIRP, Vol. 52, 2003
W. -C. Shih, C. Hidrovo, S. -G. Kim, and
G. Barbastathis, "Optical diversity by nanoscale actuation", IEEE
Nanotechnology conference, San Francisco, CA, August 2003.
Y. Jeon, R. Sood, and S.G. Kim, "A
Piezoelectric Micro Cantilever Device for Harvesting Ambient Energy", CIRP
International Seminar on Micro and Nano Technology, Copenhagen, November 2003
C. W. Wong, P. T. Rakich, S. G. Johnson,
M. Qi, Y. Jeon, G. Barbastathis and S.G. Kim, "Tunable Photnic Bandgap
Microcavities in Optical Waveguides", Conference on Laser and Electro
Optics, Long Beach, 2003
C. W. Wong, Y. B. Jeon, S. G. Kim,
"Strain-tuning of nano-optical devices: tunable gratings and photonic
crystals", Transducers 2003, The 12th Int'l Conference on Solid
State Sensors, Actuators and Microsystems, June 2003, Oral Presentation
Y. B. Jeon, C. W. Wong, S. G. Kim,
"Water-immersible micromachined Pb(Zr,Ti)O3 thin film actuator",
Int'l Conference on Electroceramics, Cambridge, MA, Aug. 2003
Y. B. Jeon, R. Sood, Lodewyk Steyn, S. G.
Kim, "Energy Harvesting MEMS Devices Based on d33 Mode
Piezoelectric Pb(Zr,Ti)O3 Thin Film Cantilever", CIRP Seminar
on Micro and Nano Technology, Copenhagen, Denmark, November 13-14, 2003
2002
S.G. Kim, Y. Shi and Y. Jeon, "Design
of Microphotonic Beam Steering Systems", Annals of the CIRP, Vol. 51, No.
1, 2002
C. Wong, W. Shih, Y. Jeon, S. Desai, M.
Schmidt, S. Kim and G. Barbastathis, "Analog tunable diffractive gratings
with miliradian resolution", Optical Fiber Communication Conference,
Anaheim, CA., March, 2002
C. Wong, W. Shih, Y. Jeon, S. Desai, M.
Schmidt, S. Kim and G. Barbastathis, "Electrostatic and piezoelectric analog
tunable diffractive gratings", Conference on Laser and Electro Optics,
Long Beach, CA., March 2002
W.-C. Shih, C.-W. Wong, Y.-B. Jeon, S.-G.
Kim, and G. Barbastathis, "MEMS analog tunable gratings" PNC '02. (
Photonics and Nanotechnology conference, at Duke university), 2002
Chee Wei Wong, Wei-Chuan Shih, Yong Bae
Jeon, George Barbastathis, and S. G. Kim, "Tunable Optical MEMS Devices
for Intelligent Communication Networks", 2002 CIRP Design Seminar, Hong
Kong, May 16-18, 2002
C. Wong, W. Shih, Y. Jeon, S. Desai, G.
Barbastathis, and S. Kim, "Analog tunable gratings with sub-nanometer
resolution", Proc. of Solid-State Sensor and Actuator Workshop, Hilton
Head, South Carolina, June, 2002
Publications prior to 2001
S. G. Kim, "MEMS-based Display Technologies",
In; "Display Engineering" (in Korean), Cheongbum Press, 2000
S. G. Kim, Kyu-Ho Hwang, Jin Hwang,
Myung-Kwon Koo, and Keun-Woo Lee, "Thin-film Micromirror Array (TMA) - A
New Chip-based Display Device for the Large Screen Display", Journal of
the Society of Information Display, Vo. 8, No. 2, 2000
S. G. Kim and Myungkwon Koo, “Design of a
microactuator array against the coupled nature of microelectromechanical
systems (MEMS) processes”, Annals of the CIRP, Vo. 49, No. 1, 2000
J. Bae, S.G. Kim, M. Mondol, M. Farhoud,
M. Hwang and K. Youcef-Toumi, “Experimental Study of the Interactions in the
Nanostructured Ni Pillar Arrays”, Journal of Applied Physics, Vol. 87, No. 9,
May 2000
S. G. Kim and Kyu-Ho Hwang,
"Thin-film Micromirror Array", Information Display (Official Magazine
of Society of Information Display, invited), Vol. 15, No. 4/5, pp.30-34, 1999.
H.K.Lee, J.B.Yoon, E. Yoon, S.B. Ju, Y.J.
Yong, W.Lee and S.G. Kim,”A High Fill-Factor Infrared Bolometer using
Micromachined Multilevel Electrothermal Structures”, IEEE Trans. on Electron
Devices, Vol.46, No.7, July 1999
S. G. Kim and Kyu-Ho Hwang, "Recent
progresses of Thin-film Micromirror Array (TMA)", Proc. of International
Display Workshop, Sendai, Japan, December 1999. (Invited Paper)
Y. K. Kim, J. M. Bae, S. Y. Son, J. H.
Choi, and S. G. Kim, "High Speed Atomic Force Microscope Cantilevers with
Built-in Piezoelectric Actuator", Proc. of MOEMS '99, Mainz, Germany,
September 1999.
S. G. Kim and Kyu-Ho Hwang,
"Thin-film Micromirror Array (TMA) for Information Display Systems",
Proc. of Int’l Display Research Conference, Eurodisplay, Berlin, Germany,
September 1999. (Invited Paper)
S. G. Kim and Kyu-Ho Hwang,
"Thin-film Micromirror Array (TMA) for Cost-Competitive Information
Display Systems", Proc. of SID Conference, San Jose, May 1999. (Invited
Paper)
S.B. Joo, Y.J. Yong, and S.G. Kim, “Design
and Fabrication of a High Fill-factor Micro-bolometer using Double Sacrificial
Layers”, Infrared Technology and Applications Conference, SPIE Proceedings
Vol.3698, Orlando, Jan.1999
S. G. Kim, Kyu-Ho Hwang, Jong-Sam Kim,
Young-Jun Choi, and Joon-Mo Kim, "Thin-film Micromirror Array (TMA) for
High Luminance and Cost-Competitive Information Display Systems", Proc. of
SPIE Photonics West Symposium, Electronic Imaging, Projection Displays V,
Proceedings of SPIE Volume: 3634, San Jose, January 1999. (Invited Paper)
Kyu-Ho Hwang, Yong-Jin Song, and S. G.
Kim, "Micromachined Thin-Film Actuated Mirror Array for High Brightness
Projection Displays", J of Japanese Applied Physics, Vol. 37, Part 1, No.
12B, pp.7074-7077, 1998.
Kyu-Ho Hwang, Yong-Jin Song, and S. G.
Kim, "Design and Fabrication of the Thin-film Micromirror Array-actuated
for Large Projection Displays", J. of the Korean Physical Society, Vol.
33, pp. S467-S470, November 1998.
S. G. Kim, Kyu-Ho Hwang, Jin Hwang,
Myung-Kwon Koo, and Keun-Woo Lee, "Actuated Mirror Array - A New
Chip-based Display Device for the Large Screen Display", Proc. of Int’l
Display Research Conference - Asian Display, Seoul, Korea, September 1998.
Kyu-Ho Hwang, Myung-Kwon Koo, and S. G.
Kim, "High-brightness Projection Display Systems Based on the Thin-Film
Actuated Mirror Array (TFAMA)", Proc. of SPIE, Vol. 3513, Santa Clara,
September 1998.
S. G. Kim and Kyu-Ho Hwang,
"Thin-Film Actuated Mirror Spatial Light Valve for High Brightness
Projection Displays", Proc. of IEEE/LEOS Summer Topicals on Optical MEMS,
Monterey, July, 1998.
Kyu-Ho Hwang, Yong-Jin Song, and S. G.
Kim, "Micromachined Thin-Film Actuated Mirror Array for High Brightness Projection
Displays", Proc. of Int’l Micro Nano Conference, Kyoungju, Korea, July,
1998.
S. G. Kim, K. H. Hwang, Y. J. Choi, Y. K.
Min, and J. M. Bae, "Micromachined Thin-Film Mirror Array for Reflective
Light Modulation", Annals of the CIRP, Vol. 46, No. 1, pp.455-458, 1997.
K. H. Hwang, Y. J. Choi, Y. K. Min, J. M.
Bae, and S. G. Kim, "Effect of Anchor Design on the Deflection of
Micromachined Cantilever Beams", Proc. of International Conf. on
Micromechatronics for Information and Precision Equipment, Tokyo, Japan, July,
1997.
Yongli Huang, Hong Zhang, Eun Sok Kim, S.
G. Kim, and Yong Bae Jeon, "Piezoelectrically Actuated Microcantilever for
Actuated Mirror Array Application", Proc. of Solid-State Sensor and
Actuator Workshop, Hilton Head South Carolina, June, 1996.
H.J. Pahk, Y.H,Kim, Y.S.Song and S.G.Kim,
”Development of Computer Aided Inspection System for Integrated Mold
Manufacturing”, Annals of the CIRP, Vol. 42/1, 1993
S.J. Kim, N.P. Suh, and S.G. Kim, “Design
of Software System based on Axiomatic Design”, International Journal of
Robotics and CIM, Vol.8, No. 4,1991
S.J. Kim, N.P.Suh, and S.G.Kim, “Design of
Software System based on Axiomatic Design”, Annals of the CIRP, Vol.
8,40/1,1991
Y.J. Huh and S.G. Kim, ”A Knowledge-based CAD
System for Concurrent Product Design in Injection Molding”, Int’l J. of CIM,
Vol.4,No.4, 1991
Y.J. Huh and S.G. Kim, ”A Knowledge-based
CAD System for the Synthesis of Supplementary Features in Injection Molded
Parts”, Transactions of KSME, Vol.15, No.6, 1991
H.S. Lee, H.C. Sin and S.G. Kim,
”Iterative Boundary Pressure Reflection Method for the Simulation of Injection
Mold Filling”, J. of Polymer Engineering and Science, Vol. 30, No. 23, P1513,
1990
S.G. Kim, M.J. Kang and C.W. Lee,
“Development of the CIM Technology”, J. of the KSME, Vol. 30, No.1, 1990
M. Kang,. S.G. Kim, and C.W. Lee, “CIM for
Mold Factory Automation”, Annals of the CIRP, Vol.39/1, 1990
Y.J. Huh and S.G. Kim, ”A Knowledge-based
CAD System for Supplementary Geometry of Injection Molded Parts”, Proc. of
Int’l Conference on Die & Mold Technology, Shanghai, China, 1990
Y.J. Huh and S.G. Kim, “RIBBER; A
Knowledge-based CAD System for Ribbed Injection Molded Parts”, Bounded Vol Of
the Symposium on Concurrent Product and Process Design, PED Vol. 36, ASME WAM,
San Francisco, 1989
S. G. Kim and Nam P. Suh, “Knowledge-based
Expert System for Injection Molding”, International Journal of Robotics and
CIM, Pergamon, Vol.3, No.2, 1987
S. G. Kim and Nam P. Suh, ”Performance
Predication of Weldline Structure in Amorphous Polymers”, J. of Polymer
Engineering and Science, Sep. 1986, Vol.26, No.17
S. G. Kim and Nam P. Suh, “Expert Design
System for Injection Molding”, Bounded Volume, PED Vol.24, ASME WAM, Anaheim,
CA., December 1986
S. G. Kim and Nam P. Suh, “Knowledge-based
Expert System for Injection Molding”, CIRP Workshop, Proc. Int’l Conference on
Intelligent Manufacturing Systems, Budapest, Hungary, June 1986
S. G. Kim and Nam P. Suh, ”Tensile
Strength of Weldline Structure”, Proc. SPE 42nd ANTEC, New Orleans, May 1984