/* *********************************************************
   *                                                       *
   * Copyright, (C) BULL HN Information Systems Inc., 1989 *
   *                                                       *
   * Copyright, (C) Honeywell Bull Inc., 1987              *
   *                                                       *
   ********************************************************* */

/* *	Multics System Tape Header File
   *
   *	84-07-20, R. Michael Tague:  Added dm_hphcs_
   *	84-07-28, BIM: Modified for new config decks
   *	84-09-25, BIM: Modified for paged tty_buf 
   *	84-10-17, WOS: Removed old syserr mechanism, added bound_log_*,
   *	   added new syserr abs-segs, deleted audit_gate_
   *	84-10-23, KPL: Rearranged bound_file_system, bound_priv_procs
   *	   and bound_system_faults into bound_dir_control, 
   *	   bound_file_system and bound_segment_control.
   *	84-10-26, ADB: Added bound_bce_paged.
   *	84-11-13, EJ Sharpe - added bound_system_security
   *	84-11-27, EJ Sharpe - added access_audit_gate_, increase size of definitions_
   *    1984-12-04, BIM: Added bound_system_control_.
   *	84-12-10, EJ Sharpe - added bound_library_3_
   *      85-01-11, Chris Jones, increase size of definitions
   *    1985-01-21, BIM: move dn355_util to BLW.
   *	85-01-22, Keith Loepere: moved around a lot of things to reduce wired
   *	   memory usage in bce.
   *    1985-02-28, C. Marker to increase the size of definitions again.
   *	85-03-14, Keith Loepere, moved all dual object bce/Multics modules to hardcore.
   *	85-03-27, Keith Loepere: moved around a lot of things to reduce wired
   *	   memory usage during service.
   *      85-05-16, R. Michael Tague:  Changed ring brackets on dm_journal_seg_
   *         from [0,2,2] to [0,0,0].
   */

/* HISTORY COMMENTS:
  1) change(86-03-06,Fawcett), approve(86-03-06,MCR6979),
     audit(86-03-08,GDixon), install(86-07-17,MR12.0-1097):
     Change the max_length of scavenger_data for MSU3380 support.
  2) change(86-04-24,Fawcett), approve(86-04-24,MCR7383),
     audit(86-05-06,Farley), install(86-07-17,MR12.0-1097):
     Change max_length of scavenger_data to be equal to the max
     subvolume size (subvolume support).
  3) change(86-07-28,Farley), approve(86-07-28,MCR7439),
     audit(86-09-25,Fawcett), install(86-10-20,MR12.0-1189):
     Move bound_io_active into collection 1.0, delete bound_io_init (as fnp_init
     is now in bound_temp_2 (collection 2.0) and ioi_init and io_config_init
     are now in bound_temp_1 (collection 1.0)). Add bce_io_page_table,
     bce_ioi_post_seg and bound_bce_save_.
  4) change(87-04-27,Farley), approve(87-07-06,MCR7717),
     audit(87-07-13,Lippard), install(87-07-17,MR12.1-1043):
     Added bce_early_ioi_workspace temp segment. It is needed for IOI to
     function properly before establish_temp_segs has had a chance to run.
  5) change(87-08-04,Brunelle), approve(87-08-04,MCR7741),
     audit(87-08-04,GDixon), install(88-03-01,MR12.2-1029):
     Modify cur_length and max_length of definitions_ and crash_definitions_ to
     accommodate added definitions for DSA.
  6) change(87-10-27,Farley), approve(87-10-27,MCR7769),
     audit(88-02-24,Fawcett), install(88-03-01,MR12.2-1029):
     Increased the max size of inzr_stk0 to 32K (was 20K).
  7) change(88-06-27,Parisek), approve(88-06-27,MCR7928),
     audit(88-07-08,Beattie), install(88-07-19,MR12.2-1061):
     Added bound_uncp_wired to support the DSA UNCP multiplexer interface.
     Increased max_length of definitions_ and cur_length of crash_definitions_
     to accomodate the added uncp modules.
  8) change(88-10-07,Fawcett), approve(88-10-12,MECR0002),
     audit(88-10-10,Farley), install(88-10-12,MR12.2-1162):
     This change is to remove bound_uncp_wired from the Multics System Boot
     Tape.  It should only be defined for sites that are running the DSA
     Gateway service.
  9) change(88-10-17,Brunelle), approve(88-10-17,MCR7813),
     audit(88-10-17,Farley), install(88-10-18,MR12.2-1171):
     Increased size of definitions_ and crash_definitions_ by 1 page to handle
     changes needed for special_chars SCP.
 10) change(88-11-15,Martinson), approve(88-11-15,MCR8016),
     audit(88-11-15,Fawcett), install(88-11-15,MR12.2-1215):
     Close out MECR0002.  Slight change made in that bound_uncp_wired_ is not
     commented out but changed from "wired yes" to "wired no" with apppropriate
     comment in header.
 11) change(89-10-24,Parisek), approve(89-10-25,MECR0012),
     audit(89-10-25,Farley), install(89-10-25,MR12.3-1100):
     Added bound_protocol_mpx and the protocol_ring0_iso_ gate to support
     the IP/X25 (protocol) multiplexer interface.
                                                   END HISTORY COMMENTS */

boot_program:	bootload_tape_label;	end;

text:		bound_bootload_0;		/* first two pages are toehold */
 access:		read, execute, write, privileged;
 temp_seg:	yes;
 sys_id:		sysid;
 generation_time:   creation_time;
 generation_time_string:
	          creation_time_string;
 paged:		no;
 wired:		yes;
end;

/* End Collection 0 */

data:	fw.mtp610.m610, fwid.t610;
 access:		read;
 firmware: 	yes;
 init_seg: 	yes;
end;

data:	fw.mtp601.m601, fwid.t601;
 access:		read;
 firmware: 	yes;
 init_seg: 	yes;
end;

data:	fw.mtc500.m500, fwid.t500;
 access:		read;
 firmware: 	yes;
 init_seg:	yes;
end;

collection:	0.5;


fabricate:	lot;	/* lot must be first thing in collection 1.0 */
 access:		read, write;
 cur_length:	1024;			/* actually 384 */
 wired:		yes;
end;

fabricate:	as_linkage, active_sup_linkage;    /* these four segments must follow */
 access:		read, execute, write;
 cur_length:	2048;
 max_length:	16;
end;

fabricate:	ws_linkage, wired_sup_linkage;
 access:		read, execute, write;
 cur_length:	3072;
 wired:		yes;
end;

fabricate:	ai_linkage, active_init_linkage;
 access:		read, execute, write;
 cur_length:	4096;
 max_length:	7;
 init_seg:	yes;
end;

fabricate:	wi_linkage, wired_init_linkage;
 access:		read, execute, write;
 cur_length:	1024;
 init_seg:	yes;
 wired:		yes;
 paged:		yes;
end;

fabricate:	definitions_;
 path_name:	>system_library_1;
 access:		read, write;
 ringbrack:	0, 5, 5;
 cur_length:	47104;
 max_length:	89;		/* max length MUST be the same as cur_length for crash_definitions_ */
end;

fabricate:	abs_seg;
 abs_seg:		yes;
end;

fabricate:	abs_seg1;
 abs_seg:		yes;
end;

fabricate:	backup_abs_seg;
 abs_seg:		yes;
end;

fabricate:	bce_early_ioi_workspace;      /* big enough for a firmware I/O buffer */
 cur_length:	9216;
 temp_seg:          yes;
end;

fabricate:	bce_io_page_table;		/* IOI Page Table while at BCE */
 access:		read, write;
 max_length:	1;
 cur_length:	1024;
 temp_seg:	yes;
end;

fabricate:	bce_ioi_post_seg;		/* IOI IO posting while at BCE */
 access:		read, write;
 max_length:	1;
 cur_length:	1024;
 temp_seg:	yes;
end;

fabricate:	bootload_disk_post_seg;	/* Area for disk posting */
 max_length:	1;
 cur_length:	1024;
 temp_seg:	yes;
 wired:		yes;
end;

fabricate:	bootload_file_partition;
 abs_seg:		yes;
 max_length:	255;
end;

fabricate:	bootload_temp_1;
 temp_seg:	yes;
 abs_seg:		yes;
end;

fabricate:	bootload_temp_2;
 temp_seg:	yes;
 abs_seg:		yes;
end;

fabricate:	bootload_temp_3;
 temp_seg:	yes;
 abs_seg:		yes;
end;

fabricate:	bootload_temp_4;
 temp_seg:	yes;
 abs_seg:		yes;
end;

fabricate:	bootload_temp_5;
 temp_seg:	yes;
 abs_seg:		yes;
end;

fabricate:	bootload_temp_6;
 temp_seg:	yes;
 abs_seg:		yes;
end;

fabricate:	bootload_temp_7;
 temp_seg:	yes;
 abs_seg:		yes;
end;

fabricate:	bootload_temp_8;
 temp_seg:	yes;
 abs_seg:		yes;
end;

fabricate:	bootload_temp_9;
 temp_seg:	yes;
 abs_seg:		yes;
end;

fabricate:	bootload_temp_10;
 temp_seg:	yes;
 abs_seg:		yes;
end;

fabricate:	bootload_temp_11;
 temp_seg:	yes;
 abs_seg:		yes;
end;

fabricate:	bootload_temp_12;
 temp_seg:	yes;
 abs_seg:		yes;
end;

name:		bound_hc_data_wired;	/* hardcore_sct_seg, */
 add_segnames;				/* scs and */
 access:		read, write;		/* wired_hardcore_data */
 wired:		yes;
linkage;
end;

fabricate:	fim_abs_seg;
 abs_seg:		yes;
end;

fabricate:	isolts_abs_seg;
 abs_seg:		yes;
end;

fabricate:	volmap_abs_seg;
 abs_seg:		yes;
 max_length:	4;			/* Must be large enough for map of HC partition */
end;

name:		bootload_1;
 access:		read, execute;
 temp_seg:	yes;
linkage;
end;

name:		bound_active_1;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_bce_wired;
 add_segnames;
 access:		read, execute, privileged;
 init_seg:	yes;
linkage;
end;

name:		bound_disk_util_1;
 add_segnames;
 access:		read, execute;
 paged:		yes;
linkage;
end;

name:		bound_error_active_1;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_init_1;
 add_segnames;
 access:		read, execute;
 init_seg:	yes;
linkage;
end;

name:		bound_interceptors;
 add_segnames;
 access:		read, execute, privileged;
 wired:		yes;
linkage;
end;

name:		bound_io_wired;
 add_segnames;
 access:		read, execute;
 wired:		yes;
linkage;
end;

name:		bound_io_active;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_iom_support;
 add_segnames;
 access:		read, execute, privileged;
 wired:		yes;
linkage;
end;

object:		bound_library_1_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	0, 5, 5;
linkage;
end;

object:		bound_library_wired_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	0, 5, 5;
 wired:		yes;
 paged:		yes;
linkage;
end;

name:		bound_page_control;
 add_segnames;
 access:		read, execute, privileged;
 wired:		yes;
linkage;
end;

name:		bound_priv_1;
 add_segnames;
 access:		read, execute, privileged;
 wired:		yes;
linkage;
end;

name:		bound_tc_priv;
 add_segnames;
 access:		read, execute, privileged;
 wired:		yes;
linkage;
end;

name:		bound_temp_1;
 add_segnames;
 access:		read, execute, privileged;
 temp_seg:	yes;
linkage;
end;

name:		bound_unencacheable;
 add_segnames;
 access:		read, execute, privileged;
 cache:		no;
 wired:		yes;
linkage;
end;

name:		bound_wired_1;
 add_segnames;
 access:		read, execute;
 wired:		yes;
linkage;
end;

fabricate:	core_map;
 cur_length:	0;
 access:		read, write;
 wired:		yes;
end;

fabricate:	dir_seg;
 abs_seg:		yes;
end;

fabricate:	disk_config_deck;
 abs_seg:		yes;
 max_length:	4;
 access:		read, write;
 init_seg:	yes;
end;

fabricate:	disk_mst_seg;
 abs_seg:		yes;
 max_length:	256;
 access:		read, write;
 init_seg:	yes;
end;

fabricate:	disk_post_queue_seg;
 cur_length:	500;
 access:		read, write;
 wired:		yes;
end;

fabricate:	disk_seg;
 access:		read, write;
 cur_length:	0;
 wired:		yes;
end;

fabricate:	dn355_data;
 access:		read, write;
 wired:		yes;
 cur_length:	456;		/* 8 word header + 56 words per FNP (8 FNPS) */
end;

fabricate:	ds_seg;
 abs_seg:		yes;
end;

fabricate:	dump_seg;		/* part of dump partition */
 abs_seg:		yes;
 access:		read, write;
 temp_seg:	yes;
 max_length:	256;
end;

name:		emergency_shutdown;
 access:		read, execute, write, privileged;
 wired:		yes;
linkage;
 wired:		yes;
 access:		read, execute, write;
 init_seg:	no;
end;

object:		error_table_;
 path_name:	>system_library_1;
 ringbrack:	0, 5, 5;
 paged:             yes;
 wired:	          yes;
linkage;
 access:		read;
end;

fabricate:	free_area_1;                  /* big enough for a firmware io buffer */
 cur_length:	9216;
 temp_seg:          yes;
 firmware:	yes;                          /* LOAD LOW */
end;

fabricate:	idle_dsegs;
 access:		read, write;
 wired:		yes;
end;

fabricate:	idle_pdses;
 access:		read, write;
 wired:		yes;
end;

name:		init_processor;
 access:		read, execute, write, privileged;
 wired:		yes;
linkage;
end;

name:		inzr_stk0;
 cur_length:	32768;
 access:		read, write;
end;

fabricate:	ioi_abs_seg;
 abs_seg:		yes;
 access:		read, write;
 wired:		yes;
end;

fabricate:	io_config_data;
 path_name:	>system_library_1;
 access:		read, write;
 acl:		r, *.*.*;
 ringbrack:	0, 5, 5;
end;

fabricate:	ioi_data;
 access:		read, write;
 wired:		yes;
end;

fabricate:	iom_data;
 access:		read, write;
 wired:		yes;
end;

fabricate:	kst_seg;			/* This is here so bce can find its segno easily. */
 path_name:	>process_dir_dir>!zzzzzzzbBBBBBB;
 access:		read, write;
 max_length:	64;
 per_process:	yes;
end;

fabricate:	multics_low_mem;		/* 1st 256k of saved memory */
 access:		read, write;
 abs_seg:		yes;
 max_length:	256;
 temp_seg:	yes;
end;

fabricate:	multics_high_mem;		/* 2nd 256k */
 access:		read, write;
 abs_seg:		yes;
 max_length:	256;
 temp_seg:	yes;
end;

fabricate:	oc_data;
 access:		read, write;
 cur_length:	2048;
 wired:		yes;
end;

name:		pds;
 path_name:	>process_dir_dir>!zzzzzzzbBBBBBB;
 access:		read, write;
 max_length:	4;
 per_process:	yes;
 wired:		yes;
 paged:		yes;
 wired_link:	no;
linkage;
 per_process:	no;
end;

name:		prds;	/* processor data segment for bootload cpu */
 path_name:	>system_library_1;	/* will be renamed by tc_init */
 access:		read, write, execute, privileged;
 cache:		yes;
 cur_length:	9216;
 wired:		yes;
 paged:		yes;
 wired_link:	no;
 acl:		r, Initializer.SysDaemon.*;
linkage;
end;

name:		pvt,
		physical_volume_table;
 path_name:	>system_library_1;
 access:		read, write;
 ringbrack:	0, 1, 1;
 wired:		yes;
 paged:		yes;
 linkage;
 cur_length:	0;
 acl:		r, *.SysDaemon.*;
end;

fabricate:	rdisk_seg;
 access:		read, write;
 abs_seg:		yes;
 cur_length:	0;
end;

name:		restart_fault;
 access:		read, execute, privileged;
 wired:		yes;
 ringbrack:	0, 0, 7;
linkage;
end;

name:		return_to_ring_0_;
 access:		read, execute;
 ringbrack:	0, 7, 7;
 wired:		yes;
linkage;
end;

fabricate:	safe_config_deck;	/* saved last known good config deck */
 access:		read, write;
 cur_length:	4096;
 temp_seg:	yes;
end;

fabricate:	scas;		/* system controller addressing segment */
 abs_seg:		yes;
 access:		read, write;
 cur_length:	32;
 wired:		yes;
end;

name:		signaller;
 access:		read, execute, privileged;
 wired:		yes;
linkage;
end;

fabricate:	sst_names_;
 cur_length:	32;
 max_length:	1;
 ringbrack:	0, 5, 5;
 access:		read, write;
 paged:		yes;
 path_name:	>system_library_1;
 acl:		rw, *.SysDaemon.*;
 acl:		r, *.SysMaint.*;
 acl:		r, *.SysAdmin.*;
 acl:		null, *.*.*;
end;

name:		sst_seg, sst;
 access:		read, write;
 wired:		yes;
linkage;
end;

fabricate:	stack_0_data;
 access:		read, write;
 wired:		yes;
end;

fabricate:	stock_seg;
 access:		read, write;
 cur_length:	0;
 wired:		yes;
end;


name:		sys_boot_info;	/* generated from bootload_info in collection 0 */
 access:		read, write;	/* It contains info about bootload configuration, etc. */
 wired:		no;		/* It also contains the size of the sst for bce. */
 paged:		yes;
 init_seg:	yes;
linkage;
end;

object:		sys_info;
 path_name:	>system_library_1;
 access:		read, write;
 ringbrack:	0, 5, 5;
 wired:		yes;
 paged:		yes;
 wired_link:	no;
linkage;
end;

name:		syserr_data;
 access:		read, write;
 wired:		yes;
linkage;
end;

fabricate:	syserr_log_data;
 abs_seg:		yes;
 access:		read, write;
 max_length:	1;
 cur_length:	0;
 paged:		yes;
end;

fabricate:	syserr_log_laurel;
 abs_seg:		yes;
 access:		read, write;
 max_length:	255;
 cur_length:	0;
 paged:		yes;
 path_name:	>system_library_1;
ringbrack:	4, 5, 5;
 acl:		rw, Initializer.SysDaemon.*;
 acl:		r, *.SysDaemon.*;
 acl:		r, *.SysMaint.*;
 acl:		r, *.SysAdmin.*;
 acl:		null, *.*.*;
end;

fabricate:	syserr_log_hardy;
 abs_seg:		yes;
 access:		read, write;
 max_length:	255;
 cur_length:	0;
 paged:		yes;
 path_name:	>system_library_1;
ringbrack:	4, 5, 5;
 acl:		rw, Initializer.SysDaemon.*;
 acl:		r, *.SysDaemon.*;
 acl:		r, *.SysMaint.*;
 acl:		r, *.SysAdmin.*;
 acl:		null, *.*.*;
end;

name:		tc_data;
 access:		read, write;
 wired:		yes;
 paged:		yes;
 wired_link:	no;
linkage;
end;

fabricate:	tc_data_header;
 access:		read;
 wired:		no;
 temp_seg:	yes;
 cur_length:	0;
end;

data:		fw.dsc500.d500;
 init_seg:	yes;
end;

data:		fw.dsc191.m191;
 init_seg:	yes;
end;

data:		fw.msp800.msp8;
 init_seg:	yes;
end;

collection:	1.0;

/* run coms, config decks */

data:		auto.ec;		/* standard auto run ec */
  temp_seg:	yes;
end;

data:		dump.ec;		/* default dump arguments */
  temp_seg:	yes;
end;

data:		go.ec;		/* restart auto mode after manual return to bce */
  temp_seg:	yes;
end;

data:		rtb.ec;		/* auto invoked ec at crash/shut */
  temp_seg:	yes;
end;

collection:	1.2;

/* bce paged commands */

name:		bound_bce_dump_;
 add_segnames;
 access:		read, execute;
 temp_seg:	yes;
linkage;
end;

name:		bound_bce_exec_com_;
 add_segnames;
 access:		read, execute;
 temp_seg:	yes;
linkage;
end;

name:		bound_bce_paged;
 add_segnames;
 access:		read, execute;
 temp_seg:	yes;
linkage;
end;

name:		bound_bce_probe_;
 add_segnames;
 access:		read, execute;
 temp_seg:	yes;
linkage;
end;

name:		bound_bce_save_;
 add_segnames;
 access:		read, execute;
 temp_seg:	yes;
linkage;
end;

object:		bound_date_time_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	0, 5, 5;
linkage;		/* NOTE: This is permanent and load_mst knows how to make it so */
end;

object:		bound_multics_bce_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	0, 5, 5;
linkage;		/* This is also permanent. */
end;

object:		bound_qedx_;
 add_segnames;
 delete_name:	qx_search_file_;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	0, 5, 5;
linkage;
end;

fabricate:	crash_definitions_;		/* copy of definitions_ from crash image */
 access:		read, write;
 cur_length:	91136;			/* must be same as max_length for definitions_ */
 temp_seg:	yes;
end;

fabricate:	crash_name_table;		/* copy of name_table definitions_ from crash image */
 access:		read, write;
 cur_length:	12288;			/* must be same as max_length for name_table */
 temp_seg:	yes;
end;

fabricate:	crash_slt;		/* copy of slt from crash image */
 access:		read, write;
 cur_length:	2048;			/* must be same as max_length for slt */
 temp_seg:	yes;
end;

fabricate:	crash_lot;		/* copy of lot from crash image */
 access:		read, write;
 cur_length:	1024;			/* must be the same as max length for lot */
 temp_seg:	yes;
end;

/* firmware images - We repeat tape so they don't hold memory from collection
0.5 onward.  Disk (above) must be in memory until disk is booted. */

data:		fw.mtc500.m500;
 temp_seg:	yes;
end;

data:		fw.mtp601.m601;
 temp_seg: 	yes;
end;

data:		fw.mtp610.m610;
 temp_seg: 	yes;
end;

data:		fw.urcmpc.u400;
 temp_seg:	yes;
end;

data:		fw.urcmpc.ucmn;
 temp_seg:	yes;
end;

data:		fw.urcmpc.ucrp;
 temp_seg:	yes;
end;

collection:	1.5;
/*  */

object:		active_all_rings_data,
		active_all_rings_data_;
 sys_id:		system_id;
 vers_id:		version_id;
 path_name:	>system_library_1;
 access:		read, write;
 ringbrack:	0, 5, 5;
linkage;
end;

name:		active_hardcore_data,
		ahd;
 access:		read, write;
linkage;
 init_seg:	yes;
end;

object:		admin_gate_,
		admin_ring_zero_peek_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.*.*;
 ringbrack:	0, 0, 1;
linkage;
end;

object:		ast_lock_meter_seg;
 access:		read, write;
 max_length:	10;
 paged:		yes;
end;

name:		bound_355_wired;
 add_segnames;
 access:		read, execute;
 wired:		yes;
linkage;
 paged:		yes;
end;

/*  bound_uncp_wired should appear as "wired" in the header for a site 
     running DSA Gateway.  It is left here  as a place holder to avoid
     errors when running check_mst against a generated a hardcore tape */

name:		bound_uncp_wired,
		uncp,
		uncp_multiplexer,
		uncp_boot_interrupt,
		uncp_util;
 access:		read, execute;
 wired:		no;
linkage;
 paged:		yes;
end;
       
/*  End of the bound_uncp_wired section. */

name:		bound_dir_control;
 add_segnames;
 access:		read, execute;
 linkage;
end;

name:		bound_disk_util_2;
 add_segnames;
 access:		read, execute;
 paged:		yes;
linkage;
end;

name:		bound_error_active_2;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_error_wired_2;
 add_segnames;
 access:		read, execute, privileged;
 wired:		yes;
linkage;
end;

name:		bound_file_system;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_hc_backup;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_hc_reconfig;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_hc_tuning;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_init_2;
 add_segnames;
 init_seg:	yes;
 access:		read, execute;
linkage;
end;

object:		bound_library_2_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	0, 5, 5;
linkage;
end;

object:		bound_log_active_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:         0, 5, 5;
linkage; 
end;

name:		bound_mcs_util;
 add_segnames;
 access:		read, execute;
 ringbrack:	0;
linkage;
end;

name:		bound_priv_mpx;
 add_segnames;
 access:		read, execute;
 ringbrack:	0;
linkage;
end;

name:		bound_process_creation;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_protocol_mpx,
                    protocol_mpx;
 access:		read, execute;
 wired:             no;
linkage;
 paged:             yes;
end;

name:		bound_salvager;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_scavenger;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_segment_control;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_system_security;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_tc_wired;
 add_segnames;
 access:		read, execute;
 wired:		yes;
linkage;
end;

name:		bound_temp_2;
 add_segnames;
 access:		read, execute;
 temp_seg:	yes;
linkage;
end;

name:		bound_tty_active;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_vtoc_man;
 add_segnames;
 access:		read, execute;
linkage;
end;

name:		bound_x25_mpx;
 add_segnames;
 access:		read, execute;
 wired:		no;
linkage;
 wired:		yes;
end;

fabricate:	dbm_seg;
 access:		read, write;
 ringbrack:	0;
 max_length:	0;
end;

fabricate:	dir_lock_seg;
 access:		read, write;
 cur_length:	0;
 max_length:	0;
end;

object:		dm_hcs_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.*.*;
 ringbrack:	0, 0, 2;
linkage;
end;

fabricate:	dm_journal_seg_;
 path_name:	>system_library_1;
 access:		read, write;
 acl:		r, *.*.*;
 ringbrack:	0, 0, 0;
 max_length:	0;
end;

fabricate:	fnp_dump_seg;
 access:		read, write;
 cur_length:	1024;
end;

name:		hasp_mpx;
 access:		read, execute;
 wired:		no;
linkage;
 wired:		yes;
end;

object:		hc_backup_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.SysDaemon.*;
 acl:		re, *.SysAdmin.*;
 acl:		re, *.SysMaint.*;
 acl:		re, Volume_Dumper.Daemon.*;
 acl:		re, Volume_Reloader.Daemon.*;
 acl:		re, Volume_Retriever.Daemon.*;   /* No other users besides these should be added   */
 ringbrack:	0, 0, 5;
linkage;
end;

object:		hcs_,
		cpu_time_and_paging_,
		cpu_time_and_paging_op_,
		total_cpu_time_,
		virtual_cpu_time_,
		virtual_cpu_time_op_,
		xhcs_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.*.*;
 ringbrack:	0, 0, 5;
linkage;
end;

object:		hphcs_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.SysAdmin.*;
 acl:		re, *.SysMaint.*;
 acl:		re, *.SysDaemon.*;
 ringbrack:	0, 0, 5;
linkage;
end;

object:		access_audit_gate_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.SysAdmin.*;
 acl:		re, *.SysDaemon.*;
 acl:		re, *.SysMaint.*;
 ringbrack:	0, 0, 5;
linkage;
end;

object:		dm_hphcs_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, Data_Management.Daemon.*;
 acl:		re, *.SysDaemon.*;
 ringbrack:	0, 0, 2;
linkage;
end;

name:		ibm3270_mpx;
 access:		read, execute;
 wired:		no;
linkage;
 wired:		yes;
end;

fabricate:          initializer_abs_seg;
 access:		read, write;
 abs_seg:		yes;
end;

object:		initializer_gate_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, Initializer.SysDaemon.z;
 ringbrack:	0, 0, 5;
linkage;
end;

fabricate:	io_page_table_seg;
 access:		read, write;
 paged:		yes;
 max_length:	16;		/* constant in io_page_tables.incl.pl1 */
 wired:		no;		/* wired by ioi_page_table$init */
end;

fabricate:	ioat;
 access:		read, write;
 max_length:	4;
end;

object:		ioi_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.*.*;
 ringbrack:	0, 0, 5;
linkage;
end;

fabricate:	lvt;
 access:		read, write;
 cur_length:	256;
end;

object:		mhcs_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.*.*;
 ringbrack:	0, 0, 5;
linkage;
end;

object:		phcs_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.SysAdmin.*;
 acl:		re, *.SysMaint.*;
 acl:		re, *.SysDaemon.*;
 ringbrack:	0, 0, 5;
linkage;
end;

name:		polled_vip_mpx;
 access:		read, execute;
 wired:		no;
linkage;
 wired:		yes;
end;

object:		protocol_ring0_iso_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.SysAdmin.*;
 acl:		re, *.SysMaint.*;
 acl:		re, *.SysDaemon.*;
 acl:		re, Internet.Daemon.*;  /* Make sure he has access 01/22/91 WA */
 ringbrack:	0, 0, 5;
linkage;
end;

fabricate:	pv_salv_seg;
end;

fabricate:	salv_abs_seg_00;
 abs_seg:		yes;
 access:		read, write;
 wired:		yes;
end;

fabricate:	salv_abs_seg_01;
 abs_seg:		yes;
 access:		read, write;
 wired:		yes;
end;

fabricate:	salv_abs_seg_02;
 abs_seg:		yes;
 access:		read, write;
 wired:		yes;
end;

fabricate:	salv_abs_seg_03;
 abs_seg:		yes;
 access:		read, write;
 wired:		yes;
end;

fabricate:	salv_abs_seg_04;
 abs_seg:		yes;
 access:		read, write;
 wired:		yes;
end;

fabricate:	salv_dir_space;
 access:		read, write;
 max_length:	52;
end;

name:		salv_data;
 access:		read, write;
 max_length:	64;
linkage;
 init_seg:	yes;
end;

fabricate:	salv_temp_dir;
 access:		read, write;
 max_length:	205;
end;

fabricate:	scavenger_data;
 access:		read, write;
 max_length:	76;
end;

fabricate:	str_seg;
 access:		read, write;
 max_length:	16;
 cur_length:	16384;
end;

fabricate:	syserr_daemon_dseg;
 access:		read, write;
 cur_length:	1024;
end;

fabricate:	syserr_daemon_pds;
 access:		read, write;
 cur_length:	2048;
end;

fabricate:	syserr_daemon_stack;
 access:		read, write;
 cur_length:	16384;
end;

object:		shcs_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.SysDaemon.*;
 acl:		re, *.SysMaint.*;
 acl:		re, *.SysAdmin.*;
 ringbrack:	0, 0, 5;
linkage;
end;

object:		system_privilege_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.SysAdmin.*;
 acl:		re, *.SysMaint.*;
 acl:		re, *.SysDaemon.*;
 ringbrack:	0, 0, 5;
linkage;
end;

object:		tandd_;
 path_name:	>system_library_1;
 access:		read, execute;
 acl:		re, *.SysAdmin.*;
 acl:		re, *.SysMaint.*;
 acl:		re, *.SysDaemon.*;
 ringbrack:	0, 0, 5;
linkage;
end;

name:		template_pds;
 access:		read, write;
 max_length:	16;
 paged:		yes;
linkage;
end;

fabricate:	tty_area;
 access:		read, write;
 max_length:	128;
end;

name:		tty_buf;
 access:		read, write;
 wired:		yes;
 paged:             yes;
 linkage;
end;

fabricate:	tty_tables;
 access:		read, write;
 max_length:	64;
end;

fabricate:	vtoc_buffer_seg;
 access:		read, write;
end;


collection:	2.0;


/*  */

name:		bound_error_handlers_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_expand_path_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_fsim_,
		file;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_hc_initlzr_auxl_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_ios_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_ipc_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_library_3_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_log_support_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:         1, 5, 5;
end;

name:		bound_mdir_control;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_mdxhdx_;
 add_segnames;
 path_name:	>system_library_1;
 ringbrack:	1, 5, 5;
 access:		read, execute;
end;

name:		bound_oc_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_process_env_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_rcp_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_rcprm_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_reloader_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_system_control_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_system_startup_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_tape_label_util_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_tape_mult_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_volume_reloader_;
 add_segnames;
 delete_name:	reloader;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		bound_volume_rldr_ut_;
 add_segnames;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

data:		default_rtmf.rtdt;
 path_name:	>system_library_1;
 access:		read;
 ringbrack:	1, 5, 5;
end;

name:		initializer_mdc_;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 1, 5;
 acl:		re, Initializer.SysDaemon.z;
end;

name:		mdc_;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 1, 5;
 acl:		re, Initializer.SysDaemon.z;
 acl:		re, *.*.*;
end;

name:		mdc_priv_;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 1, 5;
 acl:		re, *.SysAdmin.*;
 acl:		re, *.SysMaint.*;
 acl:		re, *.SysDaemon.*;
end;

name:		operator_pointers_;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		trace_operator_pointers_;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 5, 5;
end;

name:		rcp_;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 1, 5;
 acl:		re, *.*.*;
end;

name:		rcp_priv_,
		rcp_meter_;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 1, 5;
 acl:		re, *.SysAdmin.*;
 acl:		re, *.SysMaint.*;
 acl:		re, *.SysDaemon.*;
end;

name:		rcp_sys_;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 1, 5;
 acl:		re, *.SysAdmin.*;
 acl:		re, *.SysMaint.*;
 acl:		re, *.SysDaemon.*;
 acl:		re, Volume_Dumper.Daemon.*;
 acl:		re, Volume_Reloader.Daemon.*;
 acl:		re, Volume_Retriever.Daemon.*;
end;

name:		rcp_admin_;
 path_name:	>system_library_1;
 access:		read, execute;
 ringbrack:	1, 1, 5;
 acl:		re, *.SysAdmin.*;
 acl:		re, *.SysMaint.*;
 acl:		re, *.SysDaemon.*;
end;

data:		ring_zero_meter_limits_ASCII_,     /* For compatibility */
                    ring_zero_meter_limits.ascii;
 path_name:	>system_library_1;
 ringbrack:	1, 5, 5;
 access:		read;
end;

fabricate:          ring_zero_meter_limits.table;
 path_name:	>system_library_1;
 ringbrack:	1, 5, 5;
 acl:               rw, Initializer.SysDaemon.z;
 acl:		r, *.*.*;
end;

text:		template_pit, pit;
 path_name:	>process_dir_dir>!zzzzzzzbBBBBBB;
 access:		read, write;
 ringbrack:	1, 5, 5;
end;

collection:	3.0;
fini;


*/
                                          -----------------------------------------------------------


Historical Background

This edition of the Multics software materials and documentation is provided and donated
to Massachusetts Institute of Technology by Group Bull including Bull HN Information Systems Inc. 
as a contribution to computer science knowledge.  
This donation is made also to give evidence of the common contributions of Massachusetts Institute of Technology,
Bell Laboratories, General Electric, Honeywell Information Systems Inc., Honeywell Bull Inc., Groupe Bull
and Bull HN Information Systems Inc. to the development of this operating system. 
Multics development was initiated by Massachusetts Institute of Technology Project MAC (1963-1970),
renamed the MIT Laboratory for Computer Science and Artificial Intelligence in the mid 1970s, under the leadership
of Professor Fernando Jose Corbato. Users consider that Multics provided the best software architecture for 
managing computer hardware properly and for executing programs. Many subsequent operating systems 
incorporated Multics principles.
Multics was distributed in 1975 to 2000 by Group Bull in Europe , and in the U.S. by Bull HN Information Systems Inc., 
as successor in interest by change in name only to Honeywell Bull Inc. and Honeywell Information Systems Inc. .

                                          -----------------------------------------------------------

Permission to use, copy, modify, and distribute these programs and their documentation for any purpose and without
fee is hereby granted,provided that the below copyright notice and historical background appear in all copies
and that both the copyright notice and historical background and this permission notice appear in supporting
documentation, and that the names of MIT, HIS, Bull or Bull HN not be used in advertising or publicity pertaining
to distribution of the programs without specific prior written permission.
    Copyright 1972 by Massachusetts Institute of Technology and Honeywell Information Systems Inc.
    Copyright 2006 by Bull HN Information Systems Inc.
    Copyright 2006 by Bull SAS
    All Rights Reserved

*/