(Chapter 2? Yeah, I’m rewriting the User’s Guide now and haven’t gotten around to writing Chapter 1 yet!)
Notated music, by its very name, consists of a bunch of notes that are put one after another or simultaneously on a staff. There are other things, clefs, key signatures, slurs, etc. but the heart of music is the notes; so to get anywhere in music21 you’ll need to know what the toolkit thinks about notes and how to work with them.
Go ahead and start IDLE or type “python” at the command line (Terminal on the Mac or “run: cmd” on Windows) and let’s get started.
The music21 concept of a standard note is contained in the Note object, which is found in the note module.
Read this if you’re new to Python (others can skip ahead): Notice the difference between object names and module names. Modules, which can contain one, many, or even zero objects, always begin with a lowercase letter. Music21’s objects always begin with a captial letter. So the Note object is found in the note module. The distinction between uppercase and lowercase is crucial to Python: if you type the name of an object with the wrong case it won’t know what to do and won’t give you any help in distinguishing between them.
In the note module, there are other classes besides note.Note. The most important one is note.Rest, which as you imagine represents a rest. If we load music21 with the command:
>>> from music21 import *
then you’ll now be able to access the note module just by typing note at any command line.
>>> note <module 'music21.note' from 'D:\music21files\music21\note.pyc'>
If you get something like this you’ll have access to the music21 note module any time you type “note”. The filename after “from ‘D:\music21files...’” will differ for you. It will show you where you have music21 installed (if you ever forget where you have music21 installed, this is an easy way to figure it out). As long as it ends in note.pyc or note.py or something like that you’re fine.
If you want to know what else the note module contains besides the Note and Rest objects you can type “dir(note)” to find out:
>>> dir(note) ['EighthNote', 'GeneralNote', 'HalfNote', 'Lyric', 'LyricException', 'NotRest', 'NotRestException', 'Note', 'NoteException',...]
Some of these Objects are just easier ways of making specific kinds of Note objects (half notes, etc.). Others of them are things that we’ll get to later, like Lyric objects. (By the way: I’m highlighting the names of most objects so they become links to the full documentation for the object. You can read it later when you’re curious, frustrated, or Mad Men is a re-run; you certainly don’t need to click them now).
If you’re more of a Python guru and you’re afraid of “polluting your namespace,” instead of typing “from music21 import *” you can type:>>> import music21
in which case instead of using the word note, you’ll need to call it music21.note>>> music21.note <module 'music21.note' from 'D:\music21files\music21\note.pyc'>
If you are a Python guru, you already knew that. Probably if you didn’t already know that, but you’ve heard about “polluting your namespace,” you have a Python guru friend who has screamed, “Never use import *!” Trust me for now that this tutorial will be easier if you ignore your friend for a bit; by the end of it you’ll know enough to be able to follow whatever advice seems most natural to you.
(Back from the Python digression and especially the digression of the digression):
Okay, so now you now enough about modules and objects. Let’s create a note.Note object. How about the F at the top of the treble clef staff:
>>> f = note.Note("F5")
We use the convention where middle-C is C4, the octave above it is C5, etc.
Now you have a Note. Where is it? It’s stored in the variable f. You can verify this just by typing f:
>>> f <music21.note.Note F>
And you can see that it’s actually an F and actually in octave 5 by requesting the .name and .octave attributes on the Note object, f:
>>> f.name 'F' >>> f.octave 5
Well, that didn’t tell you anything you didn’t know already! Let’s look at some other attributes that might tell you something you didn’t know:
>>> f.frequency 698.4564628... >>> f.pitchClassString '5'
That’s a bit better! So an f is about 698hz (if A4 = 440hz), and it is pitch class 5 (where C = 0, C# and Db = 1, etc.).
A couple of things that you’ll notice:
Your frequency probably has a bunch more numbers instead of ending with ”...”. Mine gives me “698.456462866008”. In the docs, we’ll sometimes write ”...” instead of putting in all those numbers (or long strings); it’s partly a way of saving space, and also because the length of a long number and even the last few digits will differ from computer to computer depending on whether it’s 32-bit or 64-bit, Mac or PC, number of sunspots last Autumn, etc. Since I don’t know what computer you’re using, don’t worry if you get slightly different results.
There are single quotes around some of the output (like the ‘F’ in f.name) and none around others (like the 5 in f.octave). The quotes mean that that attribute is returning a String (a bunch of letters or numbers or simple symbols). The lack of quotes means that it’s returning a number (either an integer or if there’s a decimal point, a sneakingly decimal-like thingy called a float (or “floating-point number”) which looks and acts just like a decimal, except when it doesn’t, which is never when you’d expect.
(The history and theory behind floats will be explained to you at length by any computer scientist, usually when he or she is the only thing standing between you and the bar at a party. Really, we shouldn’t be using them anymore, except for the fact that for our computers they’re so much faster to work with than decimals.)
The difference between the string ‘5’ and the number 5 is essential to keep in mind. In Python (like most modern programming languages) we use two equal signs (==) to ask if two things are equal. So:>>> f.octave == 5 True
That’s what we’d expect. But try:>>> f.pitchClassString == 5 False
In Python it doesn’t matter if you put the 5 in single or double quotes:>>> f.pitchClassString == '5' True
pitchClassString tells you that you should expect a string, because we’ve put it in the name. There’s also a .pitchClass which returns a number:>>> f.pitchClass 5
These two ways of getting a pitch class are basically the same for the note “F” (except that one’s a string and the other is an integer) but for a B-flat, which is .pitchClass 10 and .pitchClassString “A”, it makes a difference.
Let’s go ahead and make that B-flat note. In music21, sharps are “#” as you might expect, but flats are “-”. That’s because it’s otherwise hard to tell the difference between the Note “b” (in this instance, you can write it in upper or lower case) and the symbol “flat”. So let’s make that B-flat note:
>>> bflat = note.Note("B-2")
I’ve called the variable “bflat” here. You could call it “Bb” if you want or “b_flat”, but not “b-flat” because dashes aren’t allowed in variable names:
>>> b-flat = note.Note("B-2") SyntaxError: can't assign to operator
Since this note has an accidental you can get it by using the .accidental property:
>>> bflat.accidental <accidental flat>
Here we have something that isn’t a number and doesn’t have quotes around it. That usually means that what .accidental returns is another object – in this case an Accidental object. As we saw above, objects have attributes (and other goodies we’ll get to in a second) and the Accidental object is no exception. So let’s make a new variable that will store bflat‘s accidental:
>>> acc = bflat.accidental
We’ll get to all the attributes of Accidental objects in a bit, but here are two of them: .alter and .displayLocation. You’ll use the first one quite a bit: it shows how many semitones this Accidental changes the Note:
>>> acc.alter -1.0
Since this Accidental is a flat, its .alter is a negative number. Notice that it’s also not an integer, but a float. That might indicate that music21 supports things like quarter-tones, and in this case you’d be right.
Look back at the two lines “acc = bflat.accidental” and “acc.alter”. We set acc to be the value of bflat‘s .accidental attribute and then we get the value of that variable’s .alter attribute. We could have skipped the first step altogether and “chained” the two attributes together in one step:
>>> bflat.accidental.alter -1.0
That’s a bit of a space and time savings and we’ll do that from time to time if we don’t need to do anything more with .accidental except to get a single one of its attributes.
The Accidental object also has a .displayLocation attribute that shows whether the accidental should be put above the note (like in modern editions of Medieval music) or in its normal location:
>>> acc.displayLocation 'normal'
Good to know that we’ve set a sensible default. If you want to have the accidental display above the note, you’ll have to set that yourself:
>>> acc.displayLocation = 'above' >>> acc.displayLocation 'above'
Our variable “acc” is the exact accidental that is attached to the B-flat Note stored as bflat. It’s not a flat that’s similar to B-flat’s flat, but the same one. (in computer-speak, acc is a reference to .accidental). So now if we look at the .displayLocation of bflat.accidental we see that it too is set to the silly “above” position:
>>> bflat.accidental.displayLocation 'above'
Python is one of those cool computer languages where if an object doesn’t have a particular attribute but you think it should, you can add it to the object (some people find that this makes objects messy, but I don’t mind it). For what I hope are obvious reasons, the Note object does not have an attribute called “wasWrittenByStockhausen”. So if you try to access it, you’ll get an error:
>>> bflat.wasWrittenByStockhausen Traceback (most recent call last): AttributeError: 'Note' object has no attribute 'wasWrittenByStockhausen'
But if you set the value of that weird attribute, you can use it later:
>>> bflat.wasWrittenByStockhausen = True >>> f.wasWrittenByStockhausen = False
Then you can write an “if” statement to see if this is True or not:
>>> if bflat.wasWrittenByStockhausen == True: ... print("Hope you're enjoying Sirius!") Hope you're enjoying Sirius!
Just as you don’t type the “>>>” at the beginning of the line, don’t type the ”...” either. But you will need to put the spaces before the “print” command; Python uses spaces to keep track of what is inside of an if statement (or lots of other things) and what isn’t. (if you don’t get the joke, see: wikipedia . )
Nothing will print for the note f since we set .wasWrittenByStockhausen to False:
>>> if f.wasWrittenByStockhausen == True: ... print("I love Helicopters!")
At this point you might be tired of all this programming and just want to see or play your damn note! If you’ve installed a MusicXML reader such as MuseScore, Finale, Sibelius, or Finale Notepad, you can type:
and see it. We make the default note length a quarter-note. We’ll get to other note lengths in a minute. Notice that we put in a sensible clef also, since otherwise you won’t know that this note really is F5.
If you want to hear it instead (and you’re on Windows or Unix or an older-Mac (10.5 or older)) type:
Maddeningly, Apple removed MIDI support in the version of QuickTime (QuickTime X) included in OS X 10.6 (Snow Leopard) and above (including Mountain Lion), so you’ll need to get the older QuickTime 7 from appleQuicktime to make that work.
When we typed f.octave we didn’t put any parentheses after it, but when we call f.show() we always need to put parentheses after it, even if there’s nothing in them (in which case, we’ll use the default .show format, which is usually musicxml).
.show() is what’s called a method on the Note object, while .octave is an attribute. Think of methods as like verbs (“O Note: show thyself!”) while attributes are like adjectives that describe the object. All methods need to have parentheses after them and inside the parentheses you can usually put other things (“parameters”) that control how to perform the action. For instance, let’s create a new note, “d” by transposing our B-flat up a major-third (“M3”):
>>> d = bflat.transpose("M3") >>> d <music21.note.Note D>
In music21, we try to make it so that most methods don’t change the original object. So our good old bflat wasn’t transposed.
>>> bflat <music21.note.Note B->
Instead of changing the original note, the transpose() method “returns” (that is, spits out) a new note.Note object that represents the operation of transposing it up (or down if you want to try “-M3”) a certain interval.
If you want to change bflat itself, you can add “inPlace = True” to the parameters of .transpose() separating it from the interval by a comma. Let’s take it up a perfect fourth:
>>> bflat.transpose("P4", inPlace = True) >>> bflat <music21.note.Note E->
Of course now bflat is a terrible name for our variable! You could type “eflat = bflat” and now you can call the note eflat. But you’ll probably not need to do this too often. By the way, music21 handles some pretty wacky intervals, so if we go back to our variable d (which is still a d – transposing bflat in place didn’t change it; they’re not connected anymore, barely on speaking terms even), let’s transpose it up a doubly-diminished sixth:
>>> whatNoteIsThis = d.transpose('dd6') >>> whatNoteIsThis <music21.note.Note B--->
B-triple-flat! Haven’t seen one of those in a while ! Let’s check that note’s .accidental.alter and its .accidental.name:
>>> whatNoteIsThis.accidental.alter -3.0 >>> whatNoteIsThis.accidental.name 'triple-flat'
One last thing: not every note has an accidental. The d for instance doesn’t have one, so it returns None, which is a special value that puts nothing on the output.
If you want to be sure that it is None, you can print the value:
>>> print(d.accidental) None
Since d.accidental is None does this mean that d.accidental.name is None too?
>>> d.accidental.name Traceback (most recent call last): AttributeError: 'NoneType' object has no attribute 'name'
Nope! In fact it creates an error (which we’ll also call “raising an Exception” for reasons that will become clear soon). That’s because instead of getting an Accidental object from .accidental like we did before, we got a NoneType object (i.e., None). Accidental objects have an attribute called name, but the object None doesn’t (it’s like trying .wasWrittenByStockhausen before you’ve defined it as an attribute).
When you’re just typing in IDLE or the command line, raising an Exception is no big deal, but when you’re running a program, Exceptions will usually cause the program to crash (i.e., stop working). So we try to make sure that our Notes actually have Accidentals before we print the .accidental‘s name, and we do that by using another if statement:
>>> if d.accidental is not None: ... print(d.accidental.name)
This way is safer because we will only try to print d.accidental.name if d.accidental is not None. Since it is None in this case, Python will never try the second line (which would otherwise cause it to crash).
This might be a good place to take a rest for a second. So make a Rest:
>>> r = note.Rest()
Be sure to put the “()” (double parentheses) signs after note.Rest otherwise strange things will happen (technically you get a reference to the class note.Rest, which will come in handy in about 10 chapters, but not right now).
You can .show() it as a ‘musicxml‘ file of course, but if you try to hear it as a ‘midi‘ file, don’t expect to be overwhelmed.
One last thing: notice that we never used a variable name called “note” to store a note.Note object. Don’t do this. If you type something like this (don’t type this if you want to continue typing along with the user guide):>>> note = note.Note("C#3")
Well now you’re in a bind. You’ve got your Note object stored as note, but we need the note module in order to create new Note objects and now you have no way of getting it. (this is the problem that “polluting the namespace” causes that your Python guru friend might have warned you about). So unless you’re Emperor Leopold of Austria who complained that there were “too many notes,” you’re probably going to want to make more note.Note objects in the future, so don’t use note as a variable name. (The same goes with pitch, scale, key, clef, and so on. You’ll see me use variable names like myNote and myClef to avoid the problem).
Okay, now you have the basics of Note objects down, let’s go on to Pitch and Duration objects by clicking “Next” below, right.