VERSION 17 ******************************************************************************* *** TRNSYS input file (deck) generated by TrnsysStudio *** on Thursday, March 01, 2012 at 18:49 *** from TrnsysStudio project: C:\Trnsys17\MyProjects\BuildingProject3\BuildingProject3.tpf *** *** If you edit this file, use the File/Import TRNSYS Input File function in *** TrnsysStudio to update the project. *** *** If you have problems, questions or suggestions please contact your local *** TRNSYS distributor or mailto:software@cstb.fr *** ******************************************************************************* ******************************************************************************* *** Units ******************************************************************************* ******************************************************************************* *** Control cards ******************************************************************************* * START, STOP and STEP CONSTANTS 3 START=0 STOP=8760 STEP=1 * User defined CONSTANTS SIMULATION START STOP STEP ! Start time End time Time step TOLERANCES 0.001 0.001 ! Integration Convergence LIMITS 30 30 30 ! Max iterations Max warnings Trace limit DFQ 1 ! TRNSYS numerical integration solver method WIDTH 72 ! TRNSYS output file width, number of characters LIST ! NOLIST statement ! MAP statement SOLVER 0 1 1 ! Solver statement Minimum relaxation factor Maximum relaxation factor NAN_CHECK 0 ! Nan DEBUG statement OVERWRITE_CHECK 0 ! Overwrite DEBUG statement TIME_REPORT 0 ! disable time report EQSOLVER 0 ! EQUATION SOLVER statement * EQUATIONS "Turn" * EQUATIONS 5 TURN = 0 AA_N = 180 + TURN AA_S = TURN AA_E = 270 + TURN AA_W = 90 + TURN *$UNIT_NAME Turn *$LAYER Main *$POSITION 52 63 *------------------------------------------------------------------------------ * EQUATIONS "Radiation" * EQUATIONS 18 AZEN = [109,10] AAZM = [109,11] - TURN IT_H_0_0 = Max([109,12],0) IB_H_0_0 = Max([109,13],0) ID_H_0_0 = [109,14] AI_H_0_0 = [109,16] IT_N_180_90 = [109,18] IB_N_180_90 = [109,19] * LT(AI_N_180_90,90) AI_N_180_90 = [109,22] IT_S_0_90 = [109,24] IB_S_0_90 = [109,25] AI_S_0_90 = [109,28] IT_E_270_90 = [109,30] IB_E_270_90 = [109,31] AI_E_270_90 = [109,34] IT_W_90_90 = [109,36] IB_W_90_90 = [109,37] AI_W_90_90 = [109,40] *$UNIT_NAME Radiation *$LAYER Main *$POSITION 203 127 *------------------------------------------------------------------------------ * EQUATIONS "Shading+Light" * EQUATIONS 1 BRIGHT = [200,1] ! 27 *$UNIT_NAME Shading+Light *$LAYER Controls *$POSITION 661 724 *------------------------------------------------------------------------------ * Model "Weather data" (Type 109) * UNIT 109 TYPE 109 Weather data *$UNIT_NAME Weather data *$MODEL .\Weather Data Reading and Processing\Standard Format\TMY2\Type109-TMY2.tmf *$POSITION 89 202 *$LAYER Main # PARAMETERS 4 2 ! 1 Data Reader Mode 30 ! 2 Logical unit 4 ! 3 Sky model for diffuse radiation 1 ! 4 Tracking mode INPUTS 9 0,0 ! [unconnected] Ground reflectance 0,0 ! [unconnected] Slope of surface-1 AA_N ! [equation] Azimuth of surface-1 0,0 ! [unconnected] Slope of surface-2 AA_S ! [equation] Azimuth of surface-2 0,0 ! [unconnected] Slope of surface-3 AA_E ! [equation] Azimuth of surface-3 0,0 ! [unconnected] Slope of surface-4 AA_W ! [equation] Azimuth of surface-4 *** INITIAL INPUT VALUES 0.2 90 AA_N 90 AA_S 90 AA_E 90 AA_W *** External files ASSIGN "C:\Users\MAlHamahmy\Documents\Masdar\CTF\Weather Data\x - Copy.TM2" 30 *|? Weather data file |1000 *------------------------------------------------------------------------------ * Model "Psychrometrics" (Type 33) * UNIT 331 TYPE 33 Psychrometrics *$UNIT_NAME Psychrometrics *$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Relative Humidity Known\Type33e.tmf *$POSITION 209 330 *$LAYER Main # PARAMETERS 3 2 ! 1 Psychrometrics mode 1 ! 2 Wet bulb mode 1 ! 3 Error mode INPUTS 3 0,0 ! [unconnected] Dry bulb temp. 109,2 ! Weather data:relative humidity ->Percent relative humidity 0,0 ! [unconnected] Pressure *** INITIAL INPUT VALUES 20 50 1 *------------------------------------------------------------------------------ * Model "Sky temp" (Type 69) * UNIT 69 TYPE 69 Sky temp *$UNIT_NAME Sky temp *$MODEL .\Physical Phenomena\Sky Temperature\calculate cloudiness factor\Type69b.tmf *$POSITION 359 276 *$LAYER Main # # PARAMETERS 2 0 ! 1 mode for cloudiness factor 0 ! 2 height over sea level INPUTS 4 331,7 ! Psychrometrics:Dry bulb temperature ->Ambient temperature 331,8 ! Psychrometrics:Dew point temperature. ->Dew point temperature at ambient conditions 109,13 ! Weather data:beam radiation on horitonzal ->Beam radiation on the horizontal 109,14 ! Weather data:sky diffuse radiation on horizontal ->Diffuse radiation on the horizontal *** INITIAL INPUT VALUES 0 0 0 0 *------------------------------------------------------------------------------ * EQUATIONS "Light Thresholds" * EQUATIONS 2 Toth_L_on = -3.6*0 Eoth_L_off = -3.6*0 *$UNIT_NAME Light Thresholds *$LAYER Controls *$POSITION 469 532 *------------------------------------------------------------------------------ * Model "Lights" (Type 2) * UNIT 200 TYPE 2 Lights *$UNIT_NAME Lights *$MODEL .\Controllers\Differential Controller w_ Hysteresis\generic\Solver 0 (Successive Substitution) Control Strategy\Type2d.tmf *$POSITION 559 543 *$LAYER Controls # *$# NOTE: This controller can only be used with Solver 0 (Successive substitution) *$# *$# *$# *$# *$# *$# *$# *$# *$# PARAMETERS 2 5 ! 1 No. of oscillations 40000 ! 2 High limit cut-out INPUTS 6 0,0 ! [unconnected] Upper input value IT_H_0_0 ! Radiation:IT_H_0_0 ->Lower input value 0,0 ! [unconnected] Monitoring value 200,1 ! Lights:Output control function ->Input control function Toth_L_on ! Light Thresholds:Toth_L_on ->Upper dead band Eoth_L_off ! Light Thresholds:Eoth_L_off ->Lower dead band *** INITIAL INPUT VALUES 0 0 0 0 0 0 *------------------------------------------------------------------------------ * Model "Building" (Type 56) * UNIT 56 TYPE 56 Building *$UNIT_NAME Building *$MODEL .\Loads and Structures\Multi-Zone Building\Type56.tmf *$POSITION 760 586 *$LAYER Main # # *$# PARAMETERS 3 31 ! 1 Logical unit for building description file (.bui) 1 ! 2 Star network calculation switch 0.5 ! 3 Weighting factor for operative temperature INPUTS 38 0,0 ! [unconnected] 1- TAMB 331,6 ! Psychrometrics:Percent relative humidity -> 2- RELHUMAMB 0,0 ! [unconnected] 3- TSKY 0,0 ! [unconnected] 4- TSGRD AZEN ! Radiation:AZEN -> 5- AZEN AAZM ! Radiation:AAZM -> 6- AAZM IT_N_180_90 ! Radiation:IT_N_180_90 -> 7- IT_N_180_90 IT_S_0_90 ! Radiation:IT_S_0_90 -> 8- IT_S_0_90 IT_E_270_90 ! Radiation:IT_E_270_90 -> 9- IT_E_270_90 IT_W_90_90 ! Radiation:IT_W_90_90 -> 10- IT_W_90_90 IT_H_0_0 ! Radiation:IT_H_0_0 -> 11- IT_H_0_0 IB_N_180_90 ! Radiation:IB_N_180_90 -> 12- IB_N_180_90 IB_S_0_90 ! Radiation:IB_S_0_90 -> 13- IB_S_0_90 IB_E_270_90 ! Radiation:IB_E_270_90 -> 14- IB_E_270_90 IB_W_90_90 ! Radiation:IB_W_90_90 -> 15- IB_W_90_90 IB_H_0_0 ! Radiation:IB_H_0_0 -> 16- IB_H_0_0 AI_N_180_90 ! Radiation:AI_N_180_90 -> 17- AI_N_180_90 AI_S_0_90 ! Radiation:AI_S_0_90 -> 18- AI_S_0_90 AI_E_270_90 ! Radiation:AI_E_270_90 -> 19- AI_E_270_90 AI_W_90_90 ! Radiation:AI_W_90_90 -> 20- AI_W_90_90 AI_H_0_0 ! Radiation:AI_H_0_0 -> 21- AI_H_0_0 0,0 ! [unconnected] 22- GRDREF 0,0 ! [unconnected] 23- CNAT_1 0,0 ! [unconnected] 24- CNAT_2 0,0 ! [unconnected] 25- CNAT_3 0,0 ! [unconnected] 26- CNAT_4 0,0 ! [unconnected] 27- CNAT_5 0,0 ! [unconnected] 28- CNAT_6 0,0 ! [unconnected] 29- CNAT_7 0,0 ! [unconnected] 30- CNAT_8 0,0 ! [unconnected] 31- CNAT_9 0,0 ! [unconnected] 32- CNAT_10 0,0 ! [unconnected] 33- T_COOL_ON 0,0 ! [unconnected] 34- MS_N_180_90 0,0 ! [unconnected] 35- MS_S_0_90 0,0 ! [unconnected] 36- MS_E_270_90 0,0 ! [unconnected] 37- MS_W_90_90 BRIGHT ! Shading+Light:BRIGHT -> 38- BRIGHT *** INITIAL INPUT VALUES 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** External files ASSIGN "BuildingProject3.b17" 31 *|? Building description file (*.bui) |1000 *------------------------------------------------------------------------------ * Model "Temperature" (Type 65) * UNIT 25 TYPE 65 Temperature *$UNIT_NAME Temperature *$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf *$POSITION 1068 596 *$LAYER Main # # PARAMETERS 12 10 ! 1 Nb. of left-axis variables 2 ! 2 Nb. of right-axis variables -0.1 ! 3 Left axis minimum 1.2 ! 4 Left axis maximum -0.1 ! 5 Right axis minimum 1.2 ! 6 Right axis maximum 1 ! 7 Number of plots per simulation 12 ! 8 X-axis gridpoints 0 ! 9 Shut off Online w/o removing -1 ! 10 Logical unit for output file 0 ! 11 Output file units 0 ! 12 Output file delimiter INPUTS 12 56,1 ! Building: 1- TAIR_ZONE_D3 ->Left axis variable-1 56,2 ! Building: 2- TAIR_ZONE_D4 ->Left axis variable-2 56,3 ! Building: 3- TAIR_ZONE_E4 ->Left axis variable-3 56,4 ! Building: 4- TAIR_ZONE_C3 ->Left axis variable-4 56,5 ! Building: 5- TAIR_ZONE_C4 ->Left axis variable-5 56,6 ! Building: 6- TAIR_ZONE_D5 ->Left axis variable-6 56,7 ! Building: 7- TAIR_ZONE_E5 ->Left axis variable-7 56,8 ! Building: 8- TAIR_ZONE_F4 ->Left axis variable-8 56,9 ! Building: 9- TAIR_ZONE_E3 ->Left axis variable-9 56,10 ! Building: 10- TAIR_ZONE_D2 ->Left axis variable-10 56,11 ! Building: 11- TAIR_FICTGROUND ->Right axis variable-1 56,12 ! Building: 12- TAIR_FICTROOF ->Right axis variable-2 *** INITIAL INPUT VALUES Zone_D3 Zone_D4 Zone_E4 Zone_C3 Zone_C4 Zone_D5 Zone_E5 Zone_F4 Zone_E3 Zone_D2 TAIR_FICTGROUND TAIR_FICTROOF LABELS 3 "Temperatures [deg C]" "Temperatures [deg C]" "Temperatures" *------------------------------------------------------------------------------ * Model "System_Printer" (Type 25) * UNIT 12 TYPE 25 System_Printer *$UNIT_NAME System_Printer *$MODEL \Trnsys17\Studio\lib\System_Output\Type25a.tmf *$POSITION 1043 511 *$LAYER OutputSystem # PARAMETERS 10 STEP ! 1 Printing interval START ! 2 Start time STOP ! 3 Stop time 32 ! 4 Logical unit 2 ! 5 Units printing mode 0 ! 6 Relative or absolute start time -1 ! 7 Overwrite or Append -1 ! 8 Print header 0 ! 9 Delimiter 1 ! 10 Print labels INPUTS 10 56,1 ! Building: 1- TAIR_ZONE_D3 ->Input to be printed-1 56,2 ! Building: 2- TAIR_ZONE_D4 ->Input to be printed-2 56,3 ! Building: 3- TAIR_ZONE_E4 ->Input to be printed-3 56,4 ! Building: 4- TAIR_ZONE_C3 ->Input to be printed-4 56,5 ! Building: 5- TAIR_ZONE_C4 ->Input to be printed-5 56,6 ! Building: 6- TAIR_ZONE_D5 ->Input to be printed-6 56,7 ! Building: 7- TAIR_ZONE_E5 ->Input to be printed-7 56,8 ! Building: 8- TAIR_ZONE_F4 ->Input to be printed-8 56,9 ! Building: 9- TAIR_ZONE_E3 ->Input to be printed-9 56,10 ! Building: 10- TAIR_ZONE_D2 ->Input to be printed-10 *** INITIAL INPUT VALUES D3 D4 E4 C3 C4 D5 E5 F4 E3 D2 *** External files ASSIGN "Type25a.txt" 32 *|? Which file should contain the printed results? You can use the deck filename by entering "***", e.g. "***.out", or "***.dat" |1000 *------------------------------------------------------------------------------ * Model "System_Printer-2" (Type 25) * UNIT 13 TYPE 25 System_Printer-2 *$UNIT_NAME System_Printer-2 *$MODEL \Trnsys17\Studio\lib\System_Output\Type25a.tmf *$POSITION 995 714 *$LAYER OutputSystem # PARAMETERS 10 STEP ! 1 Printing interval START ! 2 Start time STOP ! 3 Stop time 33 ! 4 Logical unit 2 ! 5 Units printing mode 0 ! 6 Relative or absolute start time -1 ! 7 Overwrite or Append -1 ! 8 Print header 0 ! 9 Delimiter 1 ! 10 Print labels INPUTS 1 56,13 ! Building: 13- QGRAD_ZONE_D3 ->Input to be printed *** INITIAL INPUT VALUES FICTGROUND *** External files ASSIGN "Type25b.txt" 33 *|? Which file should contain the printed results? You can use the deck filename by entering "***", e.g. "***.out", or "***.dat" |1000 *------------------------------------------------------------------------------ END