TRNSYS - the TRaNsient SYstem Simulation program The Solar Energy Lab at the University of Wisconsin - Madison, USA Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France Transsolar Energietechnik GmBH, Stuttgart, Germany Thermal Energy System Specialists, LLC, Madison Wisconsin, USA Release 17.00.0007 Listing file for: "C:\Trnsys17\MyProjects\BuildingProject3\BuildingProject3.dck" *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Trnsys17\Exe" *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : 208 TRNSYS Message 75 : The Type referenced below requires descriptors instead of initial values. Reported information : Type 208 *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : 535 TRNSYS Message 75 : The Type referenced below requires descriptors instead of initial values. Reported information : Type 535 *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : 580 TRNSYS Message 76 : The following Type has been identified as allowing the unit specifications (kg/h for example) after the input specifications and intial values for the inputs. The critical parameter number, and the value of this critical parameter that indicates that the units will be supplied is also listed. This information was retrieved from the VarUnits.dat file loacted in the \Exe directory of your TRNSYS 16 installation. Reported information : Type 580, Critical Parameter 11, Parameter Value 1 *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : 580 TRNSYS Message 88 : The following Type has been identified as allowing FORMAT statements. This information was retrieved from the Formats.dat file loacted in the \Exe directory of your TRNSYS 16 installation. Reported information : Type 580 *** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors. *** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found. *** Evaluating the EQUATIONs and CONSTANTs to determine their initial values. *** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file. VERSION 17 ******************************************************************************* *** TRNSYS input file (deck) generated by TrnsysStudio *** on Thursday, March 01, 2012 at 18:49 *** from TrnsysStudio project: C:\Trnsys17\MyProjects\BuildingProject3\BuildingProject3.tpf *** *** If you edit this file, use the File/Import TRNSYS Input File function in *** TrnsysStudio to update the project. *** *** If you have problems, questions or suggestions please contact your local *** TRNSYS distributor or mailto:software@cstb.fr *** ******************************************************************************* ******************************************************************************* *** Units ******************************************************************************* ******************************************************************************* *** Control cards ******************************************************************************* * START, STOP and STEP CONSTANTS 3 START=0 STOP=8760 STEP=1 * User defined CONSTANTS ! Start time End time Time step SIMULATION 0.0000000000000000E+00 8.7600000000000000E+03 1.0000000000000000E+00 ! Integration Convergence TOLERANCES 1.0000000000000002E-03 1.0000000000000002E-03 ! Max iterations Max warnings Trace limit LIMITS 30 30 31 ! TRNSYS numerical integration solver method DFQ 1 ! TRNSYS output file width, number of characters WIDTH 72 ! NOLIST statement LIST ! MAP statement ! Solver statement Minimum relaxation factor Maximum relaxation factor SOLVER 0 1.000000000000000 1.000000000000000 ! Nan DEBUG statement NAN_CHECK 0 ! Overwrite DEBUG statement OVERWRITE_CHECK 0 ! disable time report TIME_REPORT 0 ! EQUATION SOLVER statement EQUATION SOLVING METHOD 0 * EQUATIONS "Turn" * EQUATIONS 5 TURN = 0 AA_N = 180 + TURN AA_S = TURN AA_E = 270 + TURN AA_W = 90 + TURN *$UNIT_NAME Turn *$LAYER Main *$POSITION 52 63 *------------------------------------------------------------------------------ * EQUATIONS "Radiation" * EQUATIONS 18 AZEN = [109,10] AAZM = [109,11] - TURN IT_H_0_0 = Max([109,12],0) IB_H_0_0 = Max([109,13],0) ID_H_0_0 = [109,14] AI_H_0_0 = [109,16] IT_N_180_90 = [109,18] IB_N_180_90 = [109,19] * LT(AI_N_180_90,90) AI_N_180_90 = [109,22] IT_S_0_90 = [109,24] IB_S_0_90 = [109,25] AI_S_0_90 = [109,28] IT_E_270_90 = [109,30] IB_E_270_90 = [109,31] AI_E_270_90 = [109,34] IT_W_90_90 = [109,36] IB_W_90_90 = [109,37] AI_W_90_90 = [109,40] *$UNIT_NAME Radiation *$LAYER Main *$POSITION 203 127 *------------------------------------------------------------------------------ * EQUATIONS "Shading+Light" * EQUATIONS 1 ! 27 BRIGHT = [200,1] *$UNIT_NAME Shading+Light *$LAYER Controls *$POSITION 661 724 *------------------------------------------------------------------------------ * Model "Weather data" (Type 109) * UNIT 109 TYPE 109 data *$UNIT_NAME Weather data *$MODEL .\Weather Data Reading and Processing\Standard Format\TMY2\Type109-TMY2.tmf *$POSITION 89 202 *$LAYER Main # PARAMETERS 4 ! 1 Data Reader Mode ! 2 Logical unit ! 3 Sky model for diffuse radiation ! 4 Tracking mode 2.0000000000000000E+00 3.0000000000000000E+01 4.0000000000000000E+00 1.0000000000000000E+00 INPUTS 9 ! [unconnected] Ground reflectance ! [unconnected] Slope of surface-1 ! [equation] Azimuth of surface-1 ! [unconnected] Slope of surface-2 ! [equation] Azimuth of surface-2 ! [unconnected] Slope of surface-3 ! [equation] Azimuth of surface-3 ! [unconnected] Slope of surface-4 ! [equation] Azimuth of surface-4 CONST CONST AA_N CONST AA_S CONST AA_E CONST AA_W *** INITIAL INPUT VALUES 2.0000000000000001E-01 9.0000000000000000E+01 1.8000000000000000E+02 9.0000000000000000E+01 0.0000000000000000E+00 9.0000000000000000E+01 2.7000000000000000E+02 9.0000000000000000E+01 9.0000000000000000E+01 *** External files ASSIGN C:\Users\MAlHamahmy\Documents\Masdar\CTF\Weather Data\x - Copy.TM2 30 *|? Weather data file |1000 *------------------------------------------------------------------------------ * Model "Psychrometrics" (Type 33) * UNIT 331 TYPE 33 *$UNIT_NAME Psychrometrics *$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Relative Humidity Known\Type33e.tmf *$POSITION 209 330 *$LAYER Main # PARAMETERS 3 ! 1 Psychrometrics mode ! 2 Wet bulb mode ! 3 Error mode 2.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 INPUTS 3 ! [unconnected] Dry bulb temp. ! Weather data:relative humidity ->Percent relative humidity ! [unconnected] Pressure CONST 109,2 CONST *** INITIAL INPUT VALUES 2.0000000000000000E+01 5.0000000000000000E+01 1.0000000000000000E+00 *------------------------------------------------------------------------------ * Model "Sky temp" (Type 69) * UNIT 69 TYPE 69 temp *$UNIT_NAME Sky temp *$MODEL .\Physical Phenomena\Sky Temperature\calculate cloudiness factor\Type69b.tmf *$POSITION 359 276 *$LAYER Main # # PARAMETERS 2 ! 1 mode for cloudiness factor ! 2 height over sea level 0.0000000000000000E+00 0.0000000000000000E+00 INPUTS 4 ! Psychrometrics:Dry bulb temperature ->Ambient temperature ! Psychrometrics:Dew point temperature. ->Dew point temperature at ambient conditions ! Weather data:beam radiation on horitonzal ->Beam radiation on the horizontal ! Weather data:sky diffuse radiation on horizontal ->Diffuse radiation on the horizontal 331,7 331,8 109,13 109,14 *** INITIAL INPUT VALUES 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 *------------------------------------------------------------------------------ * EQUATIONS "Light Thresholds" * EQUATIONS 2 Toth_L_on = -3.6*0 Eoth_L_off = -3.6*0 *$UNIT_NAME Light Thresholds *$LAYER Controls *$POSITION 469 532 *------------------------------------------------------------------------------ * Model "Lights" (Type 2) * UNIT 200 TYPE 2 *$UNIT_NAME Lights *$MODEL .\Controllers\Differential Controller w_ Hysteresis\generic\Solver 0 (Successive Substitution) Control Strategy\Type2d.tmf *$POSITION 559 543 *$LAYER Controls # *$# NOTE: This controller can only be used with Solver 0 (Successive substitution) *$# *$# *$# *$# *$# *$# *$# *$# *$# PARAMETERS 2 ! 1 No. of oscillations ! 2 High limit cut-out 5.0000000000000000E+00 4.0000000000000000E+04 INPUTS 6 ! [unconnected] Upper input value ! Radiation:IT_H_0_0 ->Lower input value ! [unconnected] Monitoring value ! Lights:Output control function ->Input control function ! Light Thresholds:Toth_L_on ->Upper dead band ! Light Thresholds:Eoth_L_off ->Lower dead band CONST IT_H_0_0 CONST 200,1 TOTH_L_ON EOTH_L_OFF *** INITIAL INPUT VALUES 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 *------------------------------------------------------------------------------ * Model "Building" (Type 56) * UNIT 56 TYPE 56 *$UNIT_NAME Building *$MODEL .\Loads and Structures\Multi-Zone Building\Type56.tmf *$POSITION 760 586 *$LAYER Main # # *$# PARAMETERS 3 ! 1 Logical unit for building description file (.bui) ! 2 Star network calculation switch ! 3 Weighting factor for operative temperature 3.1000000000000000E+01 1.0000000000000000E+00 5.0000000000000000E-01 INPUTS 38 ! [unconnected] 1- TAMB ! Psychrometrics:Percent relative humidity -> 2- RELHUMAMB ! [unconnected] 3- TSKY ! [unconnected] 4- TSGRD ! Radiation:AZEN -> 5- AZEN ! Radiation:AAZM -> 6- AAZM ! Radiation:IT_N_180_90 -> 7- IT_N_180_90 ! Radiation:IT_S_0_90 -> 8- IT_S_0_90 ! Radiation:IT_E_270_90 -> 9- IT_E_270_90 ! Radiation:IT_W_90_90 -> 10- IT_W_90_90 ! Radiation:IT_H_0_0 -> 11- IT_H_0_0 ! Radiation:IB_N_180_90 -> 12- IB_N_180_90 ! Radiation:IB_S_0_90 -> 13- IB_S_0_90 ! Radiation:IB_E_270_90 -> 14- IB_E_270_90 ! Radiation:IB_W_90_90 -> 15- IB_W_90_90 ! Radiation:IB_H_0_0 -> 16- IB_H_0_0 ! Radiation:AI_N_180_90 -> 17- AI_N_180_90 ! Radiation:AI_S_0_90 -> 18- AI_S_0_90 ! Radiation:AI_E_270_90 -> 19- AI_E_270_90 ! Radiation:AI_W_90_90 -> 20- AI_W_90_90 ! Radiation:AI_H_0_0 -> 21- AI_H_0_0 ! [unconnected] 22- GRDREF ! [unconnected] 23- CNAT_1 ! [unconnected] 24- CNAT_2 ! [unconnected] 25- CNAT_3 ! [unconnected] 26- CNAT_4 ! [unconnected] 27- CNAT_5 ! [unconnected] 28- CNAT_6 ! [unconnected] 29- CNAT_7 ! [unconnected] 30- CNAT_8 ! [unconnected] 31- CNAT_9 ! [unconnected] 32- CNAT_10 ! [unconnected] 33- T_COOL_ON ! [unconnected] 34- MS_N_180_90 ! [unconnected] 35- MS_S_0_90 ! [unconnected] 36- MS_E_270_90 ! [unconnected] 37- MS_W_90_90 ! Shading+Light:BRIGHT -> 38- BRIGHT CONST 331,6 CONST CONST AZEN AAZM IT_N_180_90 IT_S_0_90 IT_E_270_90 IT_W_90_90 IT_H_0_0 IB_N_180_90 IB_S_0_90 IB_E_270_90 IB_W_90_90 IB_H_0_0 AI_N_180_90 AI_S_0_90 AI_E_270_90 AI_W_90_90 AI_H_0_0 CONST CONST CONST CONST CONST CONST CONST CONST CONST CONST CONST CONST CONST CONST CONST CONST BRIGHT *** INITIAL INPUT VALUES 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 2.0000000000000001E-01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 *** External files ASSIGN BuildingProject3.b17 31 *|? Building description file (*.bui) |1000 *------------------------------------------------------------------------------ * Model "Temperature" (Type 65) * UNIT 25 TYPE 65 *$UNIT_NAME Temperature *$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf *$POSITION 1068 596 *$LAYER Main # # PARAMETERS 12 ! 1 Nb. of left-axis variables ! 2 Nb. of right-axis variables ! 3 Left axis minimum ! 4 Left axis maximum ! 5 Right axis minimum ! 6 Right axis maximum ! 7 Number of plots per simulation ! 8 X-axis gridpoints ! 9 Shut off Online w/o removing ! 10 Logical unit for output file ! 11 Output file units ! 12 Output file delimiter 1.0000000000000000E+01 2.0000000000000000E+00 -1.0000000000000001E-01 1.2000000000000000E+00 -1.0000000000000001E-01 1.2000000000000000E+00 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 INPUTS 12 ! Building: 1- TAIR_ZONE_D3 ->Left axis variable-1 ! Building: 2- TAIR_ZONE_D4 ->Left axis variable-2 ! Building: 3- TAIR_ZONE_E4 ->Left axis variable-3 ! Building: 4- TAIR_ZONE_C3 ->Left axis variable-4 ! Building: 5- TAIR_ZONE_C4 ->Left axis variable-5 ! Building: 6- TAIR_ZONE_D5 ->Left axis variable-6 ! Building: 7- TAIR_ZONE_E5 ->Left axis variable-7 ! Building: 8- TAIR_ZONE_F4 ->Left axis variable-8 ! Building: 9- TAIR_ZONE_E3 ->Left axis variable-9 ! Building: 10- TAIR_ZONE_D2 ->Left axis variable-10 ! Building: 11- TAIR_FICTGROUND ->Right axis variable-1 ! Building: 12- TAIR_FICTROOF ->Right axis variable-2 56,1 56,2 56,3 56,4 56,5 56,6 56,7 56,8 56,9 56,10 56,11 56,12 *** INITIAL INPUT VALUES Zone_D3 Zone_D4 Zone_E4 Zone_ C3 Zone_C4 Zone_D5 Zone_E5 Zone_F4 Zone_ E3 Zone_D2 TAIR_FICTGROUND TAIR_FICTROOF LABELS 3 Temperatures [deg C] Temperatures [deg C] Temperatures *------------------------------------------------------------------------------ * Model "System_Printer" (Type 25) * UNIT 12 TYPE 25 *$UNIT_NAME System_Printer *$MODEL \Trnsys17\Studio\lib\System_Output\Type25a.tmf *$POSITION 1043 511 *$LAYER OutputSystem # PARAMETERS 10 ! 1 Printing interval ! 2 Start time ! 3 Stop time ! 4 Logical unit ! 5 Units printing mode ! 6 Relative or absolute start time ! 7 Overwrite or Append ! 8 Print header ! 9 Delimiter ! 10 Print labels 1.0000000000000000E+00 0.0000000000000000E+00 8.7600000000000000E+03 3.2000000000000000E+01 2.0000000000000000E+00 0.0000000000000000E+00 -1.0000000000000000E+00 -1.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 INPUTS 10 ! Building: 1- TAIR_ZONE_D3 ->Input to be printed-1 ! Building: 2- TAIR_ZONE_D4 ->Input to be printed-2 ! Building: 3- TAIR_ZONE_E4 ->Input to be printed-3 ! Building: 4- TAIR_ZONE_C3 ->Input to be printed-4 ! Building: 5- TAIR_ZONE_C4 ->Input to be printed-5 ! Building: 6- TAIR_ZONE_D5 ->Input to be printed-6 ! Building: 7- TAIR_ZONE_E5 ->Input to be printed-7 ! Building: 8- TAIR_ZONE_F4 ->Input to be printed-8 ! Building: 9- TAIR_ZONE_E3 ->Input to be printed-9 ! Building: 10- TAIR_ZONE_D2 ->Input to be printed-10 56,1 56,2 56,3 56,4 56,5 56,6 56,7 56,8 56,9 56,10 *** INITIAL INPUT VALUES D3 D4 E4 C3 C4 D5 E5 F4 E3 D2 *** External files ASSIGN Type25a.txt 32 *|? Which file should contain the printed results? You can use the deck filename by entering "***", e.g. "***.out", or "***.dat" |1000 *------------------------------------------------------------------------------ * Model "System_Printer-2" (Type 25) * UNIT 13 TYPE 25 *$UNIT_NAME System_Printer-2 *$MODEL \Trnsys17\Studio\lib\System_Output\Type25a.tmf *$POSITION 995 714 *$LAYER OutputSystem # PARAMETERS 10 ! 1 Printing interval ! 2 Start time ! 3 Stop time ! 4 Logical unit ! 5 Units printing mode ! 6 Relative or absolute start time ! 7 Overwrite or Append ! 8 Print header ! 9 Delimiter ! 10 Print labels 1.0000000000000000E+00 0.0000000000000000E+00 8.7600000000000000E+03 3.3000000000000000E+01 2.0000000000000000E+00 0.0000000000000000E+00 -1.0000000000000000E+00 -1.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 INPUTS 1 ! Building: 13- QGRAD_ZONE_D3 ->Input to be printed 56,13 *** INITIAL INPUT VALUES FICTGROUND *** External files ASSIGN Type25b.txt 33 *|? Which file should contain the printed results? You can use the deck filename by entering "***", e.g. "***.out", or "***.dat" |1000 *------------------------------------------------------------------------------ END TRANSIENT SIMULATION STARTING AT TIME = 0.0000000000000000E+00 STOPPING AT TIME = 8.7600000000000000E+03 TIMESTEP = 1 / 1 DIFFERENTIAL EQUATION ERROR TOLERANCE = 1.0000000000000002E-03 ALGEBRAIC CONVERGENCE TOLERANCE = 1.0000000000000002E-03 DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available TRNSYS Message 90 : TRNDll.dll is compiled in release mode. External DLLs will be loaded from the .\UserLib\ReleaseDLLs\ directory. Reported information : Not available *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : The following Types were loaded from TRNDll.dll: Type25, Type65, Type56, Type69, Type109, Type2, Type33 *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : "FileReader.dll" was found but did not contain any components from the input file. *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : "type127.dll" was found but did not contain any components from the input file. *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : "Type157_demo_release.dll" was found but did not contain any components from the input file. *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : "Type76Lib.dll" was found but did not contain any components from the input file. *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : "Type82Lib.dll" was found but did not contain any components from the input file. *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available Message : "Type858-diffeqn.dll" was found but did not contain any components from the input file. *** Notice at time : 0.000000 Generated by Unit : Not applicable or not available Generated by Type : Not applicable or not available TRNSYS Message 199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded) Reported information : 0 user DLLs were loaded after searching in "C:\Trnsys17\UserLib\ReleaseDLLs" *** Notice at time : 0.000000 Generated by Unit : 56 Generated by Type : 56 Message : Shading mask file *.shm for external windows does not exist. *** Notice at time : 0.000000 Generated by Unit : 56 Generated by Type : 56 Message : TRNFLOW multi zone air flow model integrated *** Notice at time : 0.000000 Generated by Unit : 56 Generated by Type : 56 Message : Active layers and internal window calculations integrated *** Notice at time : 0.000000 Generated by Unit : 56 Generated by Type : 56 Message : No internal humidity calculations are performed and no condensation warnings are printed. if any of the outputs ntype 9,10,11,26,29,40,41,47,48 or 49 is specified The humidity calculations, using an internal timestep, will be switched on and condensation checks are performed *** Notice at time : 0.000000 Generated by Unit : 56 Generated by Type : 56 Message : Star network calculation: every iteration step of TRNSYS *** The TRNSYS components will be called in the following order: Unit # 109 Type # 109 Unit # 331 Type # 33 Unit # 69 Type # 69 Unit # 200 Type # 2 Unit # 56 Type # 56 Unit # 25 Type # 65 Unit # 12 Type # 25 Unit # 13 Type # 25 ========================================================================================== TYPE109 TIME REPORT: (for debugging purpose) ------------------------------------------------------------------------------------------ time_report_unit: 6 time_filter: .8760E+07 [ms] ========================================================================================== Level0 Level1 Level2 Level3 Level4 Counter DTime[ms] TTime[ms] ========================================================================================== zwischenzeit 1 : 0.000000000000000E+000 zwischenzeit 2 : 0.000000000000000E+000 zwischenzeit 3 : 0.000000000000000E+000 zwischenzeit 4 : 0.000000000000000E+000 zwischenzeit 5 : 0.000000000000000E+000 zwischenzeit 6 : 0.000000000000000E+000 zwischenzeit 7 : 0.000000000000000E+000 zwischenzeit 8 : 0.000000000000000E+000 zwischenzeit 9 : 0.000000000000000E+000 zwischenzeit 10 : 0.000000000000000E+000 itest : 43799 Summe : 0.000000000000000E+000 *** Notice at time : 8760.000000 Generated by Unit : 56 Generated by Type : 56 Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 1 did not always sum up to unity. normalized values were used for these timesteps! *** Notice at time : 8760.000000 Generated by Unit : 56 Generated by Type : 56 Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 2 did not always sum up to unity. normalized values were used for these timesteps! *** Notice at time : 8760.000000 Generated by Unit : 56 Generated by Type : 56 Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 3 did not always sum up to unity. normalized values were used for these timesteps! *** Notice at time : 8760.000000 Generated by Unit : 56 Generated by Type : 56 Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 4 did not always sum up to unity. normalized values were used for these timesteps! *** Notice at time : 8760.000000 Generated by Unit : 56 Generated by Type : 56 Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 5 did not always sum up to unity. normalized values were used for these timesteps! *** Notice at time : 8760.000000 Generated by Unit : 56 Generated by Type : 56 Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 6 did not always sum up to unity. normalized values were used for these timesteps! *** Notice at time : 8760.000000 Generated by Unit : 56 Generated by Type : 56 Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 7 did not always sum up to unity. normalized values were used for these timesteps! *** Notice at time : 8760.000000 Generated by Unit : 56 Generated by Type : 56 Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 8 did not always sum up to unity. normalized values were used for these timesteps! *** Notice at time : 8760.000000 Generated by Unit : 56 Generated by Type : 56 Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 9 did not always sum up to unity. normalized values were used for these timesteps! *** Notice at time : 8760.000000 Generated by Unit : 56 Generated by Type : 56 Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 10 did not always sum up to unity. normalized values were used for these timesteps! ********************************************************************************************************* The Following UNIT Numbers, TYPE Numbers, and Logical Units Were Used in the Supplied TRNSYS Input File: 12 2 4 13 25 6 25 33 9 56 56 30 69 65 31 109 69 32 200 109 33 331 34 35 36 37 ********************************************************************************************************* Total TRNSYS Calculation Time: 19.4900 Seconds