Publications

(NOTE: to be updated)

TELAMS publications are forthcoming. Below is a list of TELAC (Technology Laboraratory for Advanced Composites) reports since the offical inception in 1978 as well as those available reports from the time period predating that. Single copies of all reports, except those so indicated, are available through the laboratory at a nominal fee of 10¢ per page to cover reproduction, plus $5.00 for postage and handling. The number in parentheses after each report indicates the total number of pages. Please order the reports by report number by sending an e-mail to Mark Prendergast at markep@mit.edu
     

2002
   
 
2   0   0   2

 
   
TELAC 02-02 Gouldstone, Christopher, "Adhesive Joining of Curved Metal and Composite Structures" S. M. Thesis, June 2002 (94)

TELAC 02-01 Shim, Dong Jin, "Role of Delamination and Interlaminar Fatigue In The Failure of Laminates With Ply Dropoffs" (488)
 
2   0   0   1

 
   
TELAC 01-15 Kessler, Seth S., Spearing, S. Mark, Atalla, , Mauro J., Cesnik, Carlos E.S. and Soutis, Constantinos, "Structural Health Monitoring in Composite Materials Using Frequency Response Methods" (11)
TELAC 01-14 Dugundji, John, "The Cantilever Boundary Condition, Deflection, and Stresses of Sandwich Beams" 2001 (39)
TELAC 01-13 Kessler, Seth S., Spearing, S. Mark, and Soutis, Constantinos, "Structural Health Monitoring In Composite Materials Using Lamb Wave Methods - Part 2 " (currently not available)
TELAC 01-12 Kessler, Seth S., Spearing, S. Mark, and Soutis, Constantinos, "Structural Health Monitoring In Composite Materials Using Lamb Wave Methods", presented at 16th meeting of the American Society of Composites, Blacksburg, VA., Sept. 2001 (13)
TELAC 01-11 Huppe, Barbara and Spearing, S.M., "High Reliability Joining of Metal and Composite Components" 2001, presented at 16th meeting of the American Society for Composites, Blacksburg, VA, Sept. 2001 (12)

TELAC 01-10 Burianek, Dennis A., and Spearing, S. Mark, "Modeling Face Sheet Crack Growing in Titanium Graphite Hybrid Laminates" presented at the 16th meeting of the American Society for Composites, Blacksburg, VA, September 2001 (currently not available)

  TOP OF PAGE
   
TELAC 01-09 Burianek, Dennis A., and Spearing, S. Mark "Interacting Damage Modes in Tiktanium-Graphite Hybrid Laminates" presented at ICCM-13, Beijing, China, June 2001 (9)
TELAC 01-08 Lee, Pong Kwong, "CFD/CSD Grid Interfacing of Three-Dimensional Surfaces by Inverse Isoparametric Mapping" S.M. Thesis, June 2001 (308)
TELAC 01-07 Huppe, Barbara "High Reliability Adhesive Joining of Metal and Composite Components", June 2001 (118)
TELAC 01-06 Kessler, Seth S., Spearing, S. Mark, Atalla, Mauro J. and Cesnik, Carlos E. S., "Damage Detection in Composite Materials Using Frequency Response Methods" (19)

TELAC 01-05
 Burianek, D. A. and Spearing, S. Mark, "Fatigue Damage in Titanioum-Graphite Hybrid Laminates" (currently not available)

TELAC 01-04 Burianek, D. A., "Mechanics of Fatigue Damage in Titanium-Graphite Hybrid Laminates", June 2001 (219)
TELAC 01-03 Burianek, D. A., and Spearing, S. M., "Modeling of Facesheet Crack Growth In Titanium-Graphite Hybrid Laminates Part II: Experimental Results" (29)

TELAC 01-02 Burianek, D. A., Giannakopoulos, A. E., and Spearing, S. M. "Modeling of Facesheet Crack Growth In Titanium-Graphite Hybrid Laminates, Part I", 2001 (54)
TELAC 01-01 Lee, Pong Kwong, and Cesnik, Carlos E. S., "CFD/CSD Grid Interfacing of Three-Dimensional Surfaces by Inverse Isoparametric Mapping", July 24, 2001 (66)
  TOP OF PAGE
   
 
2   0   0   0

   
TELAC 00-15 Spearing, S. M., and Lagace, P. A. "Encyclopaedia of Materials Science and Engineering Technology" (Elsevier), Section 3.7.26, "Designing with Composites" (15)
TELAC 00-14 Kessler, Seth. S., Spearing, S. Mark, Kirkos, G. A. "A Design of a High-G Unmanned Aerial Vehicle Structure" 2000 World Aviation Conference, San Diego, CA, Oct. 10-12, 2000 (currently not available)
TELAC 00-13 Burianek and Spearing S. Mark, "Damage Modeling in Titanium-Graphite Hybrid Laminates" Proceeding, American Society of Composites, College Station, TX, September 2000 (currently not available)
TELAC 00-12 Kessler, Seth S., and Spearing S. Mark, "Design, Analysis and Testing of a High-g Composite Fuselage Structure", Proceeding, American Society of Composites, College Station, TX, September 2000 (8)
TELAC 00-11 Guendel, R. E. and Cesnik, C. E. S., "Unsteady Aerodynamic Response of a High Aspect Ratio Wings Subjected to Large Bending Deformations" July 2000 (currently not available)
TELAC 00-10 Guendel, R. E. and Cesnik, C. E. S., "Aerodynamic Impulse Response of Panel Method", July 2000 (currently not available)
  TOP OF PAGE
   
TELAC 00-09 Dugundji, J. and Cesnik, C. E. S., "A Simple Physical Look at Stiffness Coefficients for Beams", July 2000 (currently not available)
TELAC 00-08

Cesnik, C. E. S., and Ortega-Morales, M., "Active Aeroelastic Tailoring of High Aspect Ration Composite Wings", June 2000 (currently not available)
TELAC 00-07 Cesnik, C. E. S. and Ortega-Morales, M., "Active Beam Cross-Sectional Modeling", May 2000 (currently not available)

TELAC 00-06 Sanders, Catherine L, Spearing, S.Mark, and Shaw, Michael C. "Piezo-Induced Fatigue of Solder joints", June 2000 (currently not available)
TELAC 00-05 Shim, Dong-Jin and Lagace, Paul A. "An Analytical Methiod for Interlaminar Stress Analysis due to Global Effects of Play Dropoffs" (8)

TELAC 00-04 Burianek, Dennis A., and Spearing, S. Mark "Delamination Growth From Facesheet Seams in Cross-Ply Titanium-Graphite Hybrid Laminates" (17)

TELAC 00-03 Toribio, M. G., and Spearing, S. Mark "Compressive Response of Notched Glass-Fiber Epoxy/Honeycomb Sandwich Panels (45)
TELAC 00-02 Saeger, Kevin J., Lagace, Paul A. and Shim, Dong-Jim "Interlaminar Stresses Due to In-Plane Gradient Stress Fields" (25)
TELAC 00-01 Sanders, Catherine L, Spearing, S.Mark, and Shaw, Michael C. "Piezo-Induced Fatigue of Solder joints", March, 2000 (37)
  TOP OF PAGE