Publications

TELAMS publications are forthcoming. Below is a list of TELAC (Technology Laboraratory for Advanced Composites) reports since the offical inception in 1978 as well as those available reports from the time period predating that. Single copies of all reports, except those so indicated, are available through the laboratory at a nominal fee of 10¢ per page to cover reproduction, plus $5.00 for postage and handling. The number in parentheses after each report indicates the total number of pages. Please order the reports by report number by sending an e-mail to Mark Prendergast at markep@mit.edu

         

   
TOP OF PAGE
   
1   9   7   9

 

   

TELAC 79-17

Mar, J.W. and Lin, K.Y., "Characterization of Splitting Process in Graphite/Epoxy Composites", March, 1979. (currently not available)

Available in Journal of Composite Materials, Vol.13, October, 1979, pp. 278-287.

TELAC 79-16

Crawley , E.F., "The Natural Modes of Graphite/Epoxy Cantilever Plates and Shells", February, 1979. (30)

Revised version available in Journal of Composite Materials, July, 1979, pp. 195-205.

TELAC 79-15

Messac, Achille, "Graphite/Epoxy Laminates with Holes: Damage Initiation and Growth in Compression-Compression Fatigue", December, 1979. (currently not available)

TELAC 79-14

Lagace, Paul A., "The Application of Linear Elastic Fracture Mechanics to Continuous Fiber Advanced Composite Materials": A Literature Review", December, 1979. (currently not available)

TELAC 79-13

Host, Robert, "Stress and Strain Characteristics of [0/±10]s Graphite/ Epoxy Composites", December, 1979. (currently not available)

TELAC 79-12

Flanagan, Gerald V., "An Attempt at Experimental Confirmation of Composite Beam Transverse Shear Effect Analysis Methods", October, 1979. (currently not available)

TELAC 79-11

Chen, Chesley M., "Design Fabrication and Testing of Filamentary Composite Shafts", S.M. Thesis, September, 1979. (currently not available)

TELAC 79-10

Boyce, Duncan A., "Material Damping of Graphite/Epoxy Double Cantilever Beams", S.M. Thesis, September, 1979. (currently not available)

TELAC 79-09

Regelbrugge, Marc E., "Advanced Composite Manufacturing Study," September, 1979. (currently not available)

  TOP OF PAGE
   

TELAC 79-08

Lagace, Paul A., "Static Tensile Behavior of Cross-Plied Graphite/ Epoxy Laminates with Holes", S.M. Thesis, September, 1979. (358)

TELAC 79-07

Turner, Michael D., "Comparison of Static and Dynamic Test Methods for Determining the Stiffness Properties of Graphite/Epoxy Laminates", S.M. Thesis, June, 1979. (121)

TELAC 79-06

Tylko, John (currently not available)

TELAC 79-05

Garcia, Jose I., "Experimental Investigation of Splitting in Unidirectional Graphite/Epoxy Materials", May, 1979. (currently not available)

TELAC 79-04

Longabaugh, William J.R., "Fabrication and Testing of One and Two Layer Graphite/Epoxy Fabric Sandwich Beams and Coupons", May, 1979. (currently not available)

TELAC 79-03

Rogers, James C., and Wong, Michael, "Fabrication and Testing of Graphite/Epoxy Box Beams", February, 1979. (currently not available)

TELAC 79-02

Tipton, Kallirroe Z., "An Experimental Investigation of the Buckling of Graphite/Epoxy Wide Sandwich Columns," S.M. Thesis, June, 1979. (114)

TELAC 79-01

Graves , Michael J., "The Effects of Compression-Compression Fatigue on Balanced Graphite/Epoxy Laminates with Holes", S.M. Thesis, February, 1979. (currently not available)

TOP OF PAGE
   
1   9   7   8

 

   

TELAC 78-08

Regelbrugge, Marc E., and Tylko, John, "Fabrication and Testing of Composite Stiffened Panels," December, 1978. (currently not available)

TELAC 78-07

Rogers, James C., "The Behavior of Six-Ply Quasi-Isotropic Graphite/Epoxy Laminates", September, 1978. (currently not available)

TELAC 78-06

Wong, Michael, "Comparison of the Fracture Modes of [0n/±45]s Graphite/Epoxy Laminates", September, 1978. (currently not available)

TELAC 78-05

Flanagan, Gerald V., (currently not available)

TELAC 78-04

Fanucci, Jerome P., "Experimental Measurement of Young's Modulus and Poisson's Ratio of One and Two Ply Unidirectional Graphite/Epoxy Laminates Using Foam Core Sandwich Beams", June, 1978. (currently not available)

TELAC 78-03

Crawley , Edward F., "The Natural Mode Shapes and Frequencies of Graphite/Epoxy Cantilever Plates and Shells", S.M. Thesis, June, 1978. (currently not available)

TELAC 78-02

Dorsey, John, "Buckling of Sandwich Composite Columns", May, 1978. (currently not available)

TELAC 78-01

McFarland, Jenny L., "Fabrication of Holes in Graphite/Epoxy Fatigue Specimens", May, 1978. (currently not available)

TOP OF PAGE
   
1   9   7   7

 

   

TELAC 77-05

Mar, J.W. and Lin, K.Y., "Fracture Mechanics Correlation for Tensile Failure of Filamentary Composites with Holes", January, 1977. (currently not available)

Available in Journal of Aircraft, Vol. 14, 1977, pp. 703-704.

TELAC 77-04

Mar, James W., and Lin, Kuen Y., "Fracture of Boron/Aluminum Composites with Discontinuities", January, 1977. (currently not available)

Available in Journal of Composite Materials, Vol. 11, 1977, pp. 405-421.

TELAC 77-03

Maass, David P., "The Effects of Compression Fatigue on Failure Modes of Graphite/Epoxy Laminates", S.M. Thesis, September, 1977. (currently not available)

TELAC 77-02

Lagace, Paul A., "The Fracture of Holed Graphite/Epoxy Specimens", May, 1977. (currently not available)

TELAC 77-01

Lin, Kuen Y., "Fracture of Filamentary Composite Materials", Ph.D. Thesis, February, 1977. (currently not available)

TOP OF PAGE
   
1   9   7   6

 

   

TELAC 76-04

Mar, James W., "Research on the Exploitation of Advanced Composite Materials to Lightly Loaded Structures", Final Technical Report for NASA Grant NGR 22-009-781, November, 1976. (128)

TELAC 76-03

Lagace, Paul A., "Graphite/Epoxy Sandwich Beams: Their Construction for Testing", December, 1976. (currently not available)

TELAC 76-02

Flanigan, Christopher C. , "Effects of Core Material Properties on Core-Stabilized Graphite/Epoxy Laminates", S.M. Thesis, August, 1976. (currently not available)

TELAC 76-01

Hoon, Douglas M., "A Determination of the 0š Elastic Moduli and Compressive Allowable Strength for Two-Ply 0š-90š Graphite/Epoxy Laminates", S.M. Thesis, May, 1975. (currently not available)

TOP OF PAGE
   
1   9   7   5

 

   

TELAC 75-02

Shultz, Ken, "Tensile Tests of Graphite; Individual Fibers and Single and Double Ply Laminates", S.M. Thesis, May, 1975. (currently not available)

TELAC 75-01

Maass, David P., "Advanced Composite Landing Gear Leg", May, 1975. (currently not available)