
EZTwin 95 Instruciton - How to install manually using 64K memory windows
========================================================================



Please follow this installation procedure.  You will need to do it manually
because we still did not have an installation diskette for this latest
version.  

Sorry for the inconvenience.

1. If your computer is running at 800x600 resolution, then change into 640x480.
You might be asked to reboot the computer.   Will support 800x600 later.

2. Please make sure to have the following two lines in your config.sys
file.
DEVICE = C:\WINDOWS\himem.sys
DEVICE = C:\WINDOWS\emm386.exe NOEMS X=D000-DFFF

And double check whether any other application occupied the above area.

If you want to use 32K windows, then please refer the at the end of this readme.

3. Open system.ini file (under c:\windows\) with Notepad and copy the
following into [boot] section.  Default is for EZ2TV.

;<=EZShow EZTwin video setting.=>
display.drv=eztwin40.drv
ezaudience=ezvga40.drv
ezpresenter=framebuf.drv

eztwinmode=3
ezfast_graphics=0

;EZPresenter=300, EZ2VGA=320, EZ2TV=320
;ezio_addressbase=0xf300
ezio_addressbase=0xf320

ezscreen_address=0xd000
ezfontcache=0
ezdpi=96
ezcursor=0

;EZPresenter=0. EZ2VGA=1, EZ2TV=1
;ezcardtype=0
ezcardtype=1

;For odd pcmcia controller like Dell
;ezcontrollerbase=0xFCFC
ezcontrollerbase=0x3E0



4. Goto Start->Setup->Control Panel and double click on Display icon.  Then
select 'Setting' from the top menu.  Select 'Change Display Type' then you will
see the popup menu showing the below example.
  ===========
Adaptor
Trident Super VGA - This is within a Box and can be different depending upon
each mfr.

Mfr.                Trident Micro systems
version          4.0
current file     framebuf.drv,*vdd,*vflatd
  ===========

Check the curent file to see what is yours.  Mostly framebuf.drv then just
go to next step 5.

If different, then copy the first part (framebuf.drv part) and replace the
second line of the above pt.2 like the below example. (Let's say your
current file name is ABCDE.drv) Then should be read as follow

ezpresenter=ABCDE.drv 
    instead of 
ezpresenter=framebuf.drv

5. Find display.drv=pnpdrvr.drv and type ; at the front then it will show
like below.
;display.drv=pnpdrvr.drv

NOTE:  display.drv=eztwin40.drv should be active always.  If you find any 
other display.drv=xxx, then please rem out by putting ; at he beginning of line.

6. Copy eztwin40.drv and ezvga40.drv from the floppy and paste into
c:windows/system/ directory.

7. Plug the card into PCMCIA slot

8. Reboot
------------------------



32k Memory windows
====================

In order to use 32K instead of 64k, you need to make a change on 3 different lines as below, and replace ezvga40.drv with ezvga40.drv dated 6/4/98 (143,528 bytes).  If you need it, please email to us.

1. In config.sys

DEVICE = C:\WINDOWS\emm386.exe NOEMS X=D000-D7FF

or x=D800-Dfff or x=E000-E7ff or x=E800-Efff


2. In System.ini

ezscreen_address=0xd000

or 0xd800 or 0xe000 or 0xe800

The above two lines should be match each other.  


For exmaple, if you select d800-dfff, then these figure sould be used in Config.sys and System.ini as below:

DEVICE = C:\WINDOWS\emm386.exe NOEMS X=D800-DFFF

ezscreen_address=0xd800



3. In system.ini

ezfast_graphics=2

NOTE:  For 64K windows, ezfast_graphics=0

==================================

<Trouble Shooting>

1.  Please NOTE that Win 95 will replace the below line in system.ini file (C:\Windows)
display=eztwin40.drv  ---->>  display.drv=pnpdrvr.drv
It happens only when the computer is reboot.  When you finish and start in normal 
way, this changes wold not happen.


If NOt works properly, then goto c:\Windows\system.ini (using Notepad) to find 
the below line :
dispaly=pnpdrvr.drv

Correct it to:
dispaly=eztwin40.drv

And then reboot the computer.

2.  When you are using ez2tv, please make sure to install ez2tvsetup.exe application on your computer.

After installation finished, run it then you'll find one icon on the system tray.  Click it to bring GUI menu on windows.


============================

For any trouble or quesitons, please prepare Serial# of the card and your Computer 
Brand and Model name and the nature of problem.  

Email to: support@ezshow.com


EZShow Systems Inc	*********************************
7688 Aubrey St.		Display Screen & PowerPoint on TV
Burnaby V5A 1K7         *********************************
Canada                         
                               EZ2TV for H/PC
<http://www.ezshow.com>        EZ2TV for Newton

Tel:1-640-299-2033      *********************************
Fax:1-640-299-5118      Display Screen & PowerPoint on TV
*********************************************************    





