GATESWAP

Function

Swaps equivalent gates on a schematic.

Syntax

GATESWAP * *..;
GATESWAP gate_name gate_name..;

Using this command two gates may be swapped within a schematic. Both gates must be identical with the same number of pins and must be allocated the same Swaplevel in the device definition. They do not, however, need to be in the same device.

The name used in the GATESWAP command is the displayed name on the schematic (e.g. U1A for gate A in device U1).

If a device is not used anymore after the GATESWAP command, it is deleted automatically from the drawing.