Plot the Results

Start up the gwave program and load the first sinusoidal steady state result by running:

  gwave example.out.SSS.1.asc

Drag the two waveforms onto the two waveform panels and change the x-axis to a log scale. Figure 5 shows the output.

Figure 5: Simulation Results - Sinusoidal Steady State

Start up the gwave program and load the transient result by running:

  gwave example.out.TRAN.1.asc

Drag the output waveform onto the waveform panel. Figure 6 shows the output.

Figure 6: Simulation Results - Transient