| survfit.coxph {survival} | R Documentation |
Computes the predicted survivor function for a Cox proportional hazards model.
## S3 method for class 'coxph'
survfit(formula, newdata,
se.fit=TRUE, conf.int=.95,
individual=FALSE,
type,vartype,
conf.type=c("log","log-log","plain","none"), censor=TRUE, id,
start.time,
na.action=na.pass, ...)
formula |
A |
newdata |
a data frame with the same variable names as those that appear
in the The curve(s) produced will be representative of a cohort whose
covariates correspond to the values in |
individual |
This argument has been superseded by the |
conf.int |
the level for a two-sided confidence interval on the survival curve(s). Default is 0.95. |
se.fit |
a logical value indicating whether standard errors should be
computed. Default is |
type,vartype |
a character string specifying the type of survival curve.
Possible values are |
conf.type |
One of |
censor |
if FALSE time points at which there are no events (only censoring) are not included in the result. |
id |
optional variable name of subject identifiers. If this is
present, then each group of rows with the same subject id represents
the covariate path through time of a single subject, and the result
will contain one curve per subject. If the |
start.time |
optional starting time, a single numeric value.
If present the returned curve contains survival after
|
na.action |
the na.action to be used on the newdata argument |
... |
for future methods |
Serious thought has been given to removing the default value for
newdata, which is to use a single "pseudo" subject with
covariate values equal to the means of the data set, since
the resulting curve(s) almost never make sense.
It remains due to an unwarranted attachment to the option shown by
some users and by other packages. Two particularly egregious examples
are factor variables and interactions. Suppose one were studying
interspecies transmission of a virus, and the data set has a factor
variable with levels ("pig", "chicken") and about equal numbers of
observations for each. The “mean” covariate level will be 1/2 –
is this a flying pig? As to interactions assume data with sex coded as 0/1,
ages ranging from 50 to 80, and a model with age*sex. The “mean”
value for the age:sex interaction term will be about 30, a value
that does not occur in the data.
Users are strongly advised to use the newdata argument.
When the original model contains time-dependent covariates, then the
path of that covariate through time needs to be specified in order to
obtain a predicted curve. This requires newdata to contain
multiple lines for each hypothetical subject which gives the covariate
values, time interval, and strata for each line (a subject can change
strata), along with an id variable
which demarks which rows belong to each subject.
The time interval must have the same (start, stop, status)
variables as the original model: although the status variable is not
used and thus can be set to a dummy value of 0 or 1, it is necessary for
the variables to be recognized as a Surv object.
Last, although predictions with a time-dependent covariate path can be
useful, it is very easy to create a prediction that is senseless. Users
are encouraged to seek out a text that discusses the issue in detail.
When a model contains strata but no time-dependent covariates the user of this routine has a choice. If newdata argument does not contain strata variables then the returned object will be a matrix of survival curves with one row for each strata in the model and one column for each row in newdata. (This is the historical behavior of the routine.) If newdata does contain strata variables, then the result will contain one curve per row of newdata, based on the indicated stratum of the original model. In the rare case of a model with strata by covariate interactions the strata variable must be included in newdata, the routine does not allow it to be omitted (predictions become too confusing). (Note that the model Surv(time, status) ~ age*strata(sex) expands internally to strata(sex) + age:sex; the sex variable is needed for the second term of the model.)
When all the coefficients are zero, the Kalbfleisch-Prentice estimator reduces to the Kaplan-Meier, the Aalen estimate to the exponential of Nelson's cumulative hazard estimate, and the Efron estimate to the Fleming-Harrington estimate of survival. The variances of the curves from a Cox model are larger than these non-parametric estimates, however, due to the variance of the coefficients.
See survfit for more details about the counts (number of
events, number at risk, etc.)
The censor argument was fixed at FALSE in earlier versions of the code and not made available to the user. The default argument is sensible in most instances — and causes the familiar + sign to appear on plots — it is not sensible for time dependent covariates since it may lead to a large number of spurious marks.
an object of class "survfit".
See survfit.object for
details. Methods defined for survfit objects are
print, plot,
lines, and points.
If the following pair of lines is used inside of another function then
the model=TRUE argument must be added to the coxph call:
fit <- coxph(...); survfit(fit).
This is a consequence of the non-standard evaluation process used by the
model.frame function when a formula is involved.
Fleming, T. H. and Harrington, D. P. (1984). Nonparametric estimation of the survival distribution in censored data. Comm. in Statistics 13, 2469-86.
Kalbfleisch, J. D. and Prentice, R. L. (1980). The Statistical Analysis of Failure Time Data. New York:Wiley.
Link, C. L. (1984). Confidence intervals for the survival function using Cox's proportional hazards model with covariates. Biometrics 40, 601-610.
Therneau T and Grambsch P (2000), Modeling Survival Data: Extending the Cox Model, Springer-Verlag.
Tsiatis, A. (1981). A large sample study of the estimate for the integrated hazard function in Cox's regression model for survival data. Annals of Statistics 9, 93-108.
print.survfit,
plot.survfit,
lines.survfit,
coxph,
Surv,
strata.
#fit a Kaplan-Meier and plot it
fit <- survfit(Surv(time, status) ~ x, data = aml)
plot(fit, lty = 2:3)
legend(100, .8, c("Maintained", "Nonmaintained"), lty = 2:3)
#fit a Cox proportional hazards model and plot the
#predicted survival for a 60 year old
fit <- coxph(Surv(futime, fustat) ~ age, data = ovarian)
plot(survfit(fit, newdata=data.frame(age=60)),
xscale=365.25, xlab = "Years", ylab="Survival")
# Here is the data set from Turnbull
# There are no interval censored subjects, only left-censored (status=3),
# right-censored (status 0) and observed events (status 1)
#
# Time
# 1 2 3 4
# Type of observation
# death 12 6 2 3
# losses 3 2 0 3
# late entry 2 4 2 5
#
tdata <- data.frame(time =c(1,1,1,2,2,2,3,3,3,4,4,4),
status=rep(c(1,0,2),4),
n =c(12,3,2,6,2,4,2,0,2,3,3,5))
fit <- survfit(Surv(time, time, status, type='interval') ~1,
data=tdata, weight=n)
#
# Time to progression/death for patients with monoclonal gammopathy
# Competing risk curves (cumulative incidence)
fit1 <- survfit(Surv(stop, event=='progression') ~1, data=mgus1,
subset=(start==0))
fit2 <- survfit(Surv(stop, status) ~1, data=mgus1,
subset=(start==0), etype=event) #competing risks
# CI curves are always plotted from 0 upwards, rather than 1 down
plot(fit2, fun='event', xscale=365.25, xmax=7300, mark.time=FALSE,
col=2:3, xlab="Years post diagnosis of MGUS")
lines(fit1, fun='event', xscale=365.25, xmax=7300, mark.time=FALSE,
conf.int=FALSE)
text(10, .4, "Competing Risk: death", col=3)
text(16, .15,"Competing Risk: progression", col=2)
text(15, .30,"KM:prog")