ASSEMBLY LISTING OF SEGMENT >special_ldd>install>MR12.0-1206>do_request_table_.alm ASSEMBLED ON: 11/05/86 1031.6 mst Wed OPTIONS USED: list ASSEMBLED BY: ALM Version 6.7 October 1986 ASSEMBLER CREATED: 10/08/86 1557.5 mst Wed  1 " ***********************************************************  2 " * *  3 " * Copyright, (C) Honeywell Information Systems Inc., 1982 *  4 " * *  5 " ***********************************************************  000000 6 name do_request_table_ 7  8 " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " 9 "  10 " Common request table for dial_out_.  11 "  12 " Written by C. Hornig, April 1982. 13 " Modified January 1983 by C. Hornig to remove rdn and rdf. 14 " Modified February 1983 by C. Hornig to add wait.  15 "  16 " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " 17  18 include ssu_request_macros 1-1 " BEGIN INCLUDE FILE ... ssu_request_macros.incl.alm  1-2 " Created: 5 May 1980 by W. Olin Sibert  1-3 " Modified: 25 July 1980 by G. Palter to add multics_request macro  1-4 " Modified: 1 December 1981 by G. Palter to remove user_flags  1-5 " Modified: 12 February 1982 by G. Palter for version 4 1-6 " Modified: 28 February 1982 by G. Palter to add dont_summarize and dont_list  1-7 " Modified: 2 August 1982 by Jay Pattin to add unknown_request  1-8 " Modified: 24 October 1984 by G. Palter to restore user flags and add the  1-9 " set_default_flags and set_default_multics_flags macros 1-10  1-11  1-12 " ALM macros used to define subsystem request tables  1-13  1-14  1-15 macro request_table_version  1 1-16 aci "srqt_4.0",8  2 1-17 &end  1-18  1-19  1-20 macro namelist 1 1-21 maclist off,save  2 1-22 vfd 36/&K  3 1-23 &R&( aci @&i@,32  4 1-24 &)  5 1-25 maclist restore  6 1-26 &end  1-27  1-28 " 1-29  1-30 " System defined per-request flags  1-31  400000 1-32 bool flags.allow_command,400000 " valid as a command  200000 1-33 bool flags.allow_af,200000 " valid as an active function  600000 1-34 bool flags.allow_both,600000 " valid as both  1-35  100000 1-36 bool flags.unimplemented,100000 " request is not yet implemented  040000 1-37 bool flags.multics_request,040000 " request is actually a Multics command  1-38  020000 1-39 bool flags.dont_summarize,020000 " summarize_requests won't list it  010000 1-40 bool flags.dont_list,010000 " list_requests won't show it without -all 1-41  004000 1-42 bool flags.unknown,004000 " request is explicitly made unknown 1-43  1-44  1-45 " Macros for setting per-request flags  1-46  1-47 macro set_flags_loop  1 1-48 maclist off,save  2 1-49 &(3 3 1-50 &=&i,default&[ set_flags_loop &1,(0),(&2)  4 1-51 &; set &1,&1+&i 5 1-52 &]&)  6 1-53 maclist restore  7 1-54 &end  1-55  1-56  1-57 macro set_flags  1 1-58 maclist off,save  2 1-59 set &1,0  3 1-60 &=&3,&[ set_flags_loop &1,(0),(&2)  4 1-61 &; set_flags_loop &1,(&2),(&3)  5 1-62 &]  6 1-63 maclist restore  7 1-64 &end  1-65  1-66 " 1-67  1-68 " set_default_flags {(system-flags)},{(user-flags)} 1-69  1-70 " Sets the default system and/or user flags to be used for requests:  1-71 " system-flags: defines the default general nature of requests;" the default  1-72 " default is flags.allow_command  1-73 " user-flags: defines the default setting for the subsystem specific flags  1-74 " associated with requests;" the default default is none (0)  1-75 " Note: If either system-flags or user-flags is ommitted, the default is not  1-76 " changed from its prior value. This action allows the use of multiple  1-77 " set_default_flags macros within a table to change system or user 1-78 " flags without affecting the other defaults  1-79  1-80 macro set_default_flags  1 1-81 maclist off,save  2 1-82 &^=&1,&[ set_flags .dft_sf,(flags.allow_command),(&1)  3 1-83 &]  4 1-84 &^=&2,&[ set_flags .dft_uf,(0),(&2) 5 1-85 &]  6 1-86 maclist restore  7 1-87 &end  1-88  1-89  1-90 " set_default_multics_flags {(system-flags)},{(user-flags)} 1-91  1-92 " Sets the default system and/or user flags to be used for Multics commands when used as requests:  1-93 " system-flags: defines the default general nature of Multics requests;" the  1-94 " default default is flags.allow_command+flags.allow_af  1-95 " user-flags: defines the default setting for the subsystem specific flags  1-96 " associated with Multics requests;" the default default is none (0)  1-97 " Note: If either system-flags or user-flags is ommitted, the default is not  1-98 " changed from its prior value. This action allows the use of multiple  1-99 " set_default_multics_flags macros within a table to change system or user 1-100 " flags without affecting the other defaults  1-101  1-102 macro set_default_multics_flags  1 1-103 maclist off,save  2 1-104 &^=&1,&[ set_flags .dft_mrsf,(flags.allow_command,flags.allow_af),(&1)  3 1-105 &]  4 1-106 &^=&2,&[ set_flags .dft_mruf,(0),(&2)  5 1-107 &]  6 1-108 maclist restore  7 1-109 &end  1-110  1-111 " 1-112  1-113 macro .multics_request_doc 1 1-114 null  2 1-115 &end  1-116  1-117  1-118 macro dft_multics_doc_lth  1 1-119 set .multics_doc_lth,0 2 1-120 &end  1-121  1-122  1-123 " set_default_multics_doc (string)  1-124  1-125 " Sets the default documentation to be used for Multics commands when used as requests: 1-126 " string: is the documentation string to be used for any subsequent requests defined by  1-127 " the multics_request_macro;" all occurences of "&1" in this string will be replaced by  1-128 " the actual name of the request;" Eg: 1-129 " set_default_multics_doc (Type '.. help &1' for more information.) 1-130  1-131 macro set_default_multics_doc  1 1-132 maclist off,save  2 1-133 macro .multics_request_doc 3 1-134 aci @&1@  4 1-135 &&end  5 1-136 macro dft_multics_doc_lth  6 1-137 macro .compute 7 1-138 set .multics_doc_lth,&&&&l1  8 1-139 &&&&end  9 1-140 .compute (&1)  10 1-141 &&end  11 1-142 maclist restore  12 1-143 &end  1-144  1-145 " 1-146  1-147 " begin_table tablename 1-148  1-149 " Defines a subsystem request table (multiple tables may exist in a single object segment): 1-150 " tablename: the name by which this table may be referenced externally;" references to the  1-151 " table should be of the form segname$tablename where segname is the name of this  1-152 " object segment  1-153  1-154 macro begin_table  1 1-155 segdef &1  2 1-156 maclist object,save  3 1-157 use tables 4 1-158 &1: request_table_version  5 1-159 aci @&1@,32  6 1-160 dup 6  7 1-161 vfd 36/0  8 1-162 dupend 9 1-163 vfd 36/&1.rc  10 1-164 maclist off  11 1-165 set .rc,0  12 1-166 set_default_flags (default),(default)  13 1-167 set_default_multics_flags (default),(default)  14 1-168 maclist restore  15 1-169 &end  1-170  1-171  1-172 " end_table tablename  1-173  1-174 " Indicates the end of a subsystem request table definition:  1-175 " tablename: the name of the table which has now been completely defined  1-176  1-177 macro end_table  1 1-178 maclist off,save  2 1-179 set &1.rc,.rc  3 1-180 maclist restore  4 1-181 &end  1-182  1-183 " 1-184  1-185 " request name,processor,({abbreviations}),{(documentation)},  1-186 " {(system-flags)},{(user-flags)} 1-187  1-188 " Defines a subsystem request:  1-189 " name: the primary name of this request  1-190 " processor: the name of the procedure which actually executes this request;" it must be  1-191 " of the form segname$entryname  1-192 " abbreviations: is the list of defined abbreviations for this request  1-193 " documentation: a short string used by the list_requests request to explain this request 1-194 " system-flags: defines the general nature of this request;" the default is  1-195 " flags.allow_command  1-196 " user-flags: allows a subsystem to provide subsystem-specific information  1-197 " with the request's definition;" the default is none (0)  1-198  1-199 macro request  1 1-200 maclist off,save  2 1-201 set .rc,.rc+1  3 1-202 maclist object 4 1-203 use tables 5 1-204 vfd 18/&U.call,18/&U.names 6 1-205 &=&4,&[ vfd 36/0  7 1-206 &; vfd 18/&U.info,18/&l4  8 1-207 maclist off  9 1-208 use info  10 1-209 &U.info: aci @&4@  11 1-210 &]  12 1-211 use tables 13 1-212 set_flags .sf,(.dft_sf),(&5)  14 1-213 set_flags .uf,(.dft_uf),(&6)  15 1-214 maclist object 16 1-215 vfd 18/.sf,18/.uf  17 1-216 maclist off  18 1-217 use calls  19 1-218 &U.call: epaq * 20 1-219 lprp4 7|stack_header.lot_ptr,*au  21 1-220 call6 &2  22 1-221 use names  23 1-222 &U.names: namelist &1&^=&3,&[,&3&]  24 1-223 maclist restore  25 1-224 &end  1-225  1-226 " 1-227  1-228 " unknown_request name,(abbreviations)  1-229  1-230 " Defines an unknown request: used to make the utilities not recognize a request even though  1-231 " it is defined in a later request table (such as ssu_request_tables_$standard_request):  1-232 " name: the primary name of the request to be marked as unknown  1-233 " abbreviations: is the list of defined abbreviations for this request  1-234  1-235 macro unknown_request  1 1-236 maclist off,save  2 1-237 set .rc,.rc+1  3 1-238 maclist object 4 1-239 use tables 5 1-240 vfd 18/&U.call,18/&U.names 6 1-241 vfd 36/0  7 1-242 vfd 18/flags.unknown,18/0  8 1-243 maclist off  9 1-244 use calls  10 1-245 &U.call: epaq * 11 1-246 lprp4 7|stack_header.lot_ptr,*au  12 1-247 call6 ssu_$unknown_request 13 1-248 use names  14 1-249 &U.names: namelist &1&^=&2,&[,&2&]  15 1-250 maclist restore  16 1-251 &end  1-252  1-253 " 1-254  1-255 " multics_request name,({abbreviations}),({documenation}),{procedure},  1-256 " {(system-flags)},{(user-flags)}  1-257  1-258 " Defines that a Multics command/AF may be used as a subsystem request: 1-259 " name: the primary name of this request (usually the name of the Multics command/AF) 1-260 " abbreviations: is the list of defined abbreviations for this request  1-261 " documentation: a short string used by the list_requests request to explain this request;  1-262 " if no documentation is provided, the documentation specified by a prior use of  1-263 " set_default_multics_doc is used  1-264 " procedure: the name of the Multics command/AF which is actually executed by this  1-265 " request;" it must be of the form segname$entryname;" if not given, the default is  1-266 " name$name  1-267 " system-flags: defines the general nature of this request;" the default is  1-268 " flags.allow_command+flags.allow_af  1-269 " user-flags: allows a subsystem to provide subsystem-specific information  1-270 " with the request's definition;" the default is none (0)  1-271  1-272 macro multics_request  1 1-273 maclist off,save  2 1-274 set .rc,.rc+1  3 1-275 maclist object 4 1-276 use tables 5 1-277 vfd 18/&U.call,18/&U.names 6 1-278 &=&3,&[ dft_multics_doc_lth &1,(&2),(&3),(&4),(&5),(&6) 7 1-279 vfd 18/&U.info,18/.multics_doc_lth 8 1-280 &; vfd 18/&U.info,18/&l3  9 1-281 &]  10 1-282 maclist off  11 1-283 use info  12 1-284 &U.info:  13 1-285 &=&3,&[ .multics_request_doc &1,(&2),(&3),(&4),(&5),(&6)  14 1-286 &; aci @&3@ 15 1-287 &]  16 1-288 use tables 17 1-289 maclist object 18 1-290 set_flags .sf,(.dft_mrsf),(&5) 19 1-291 set_flags .uf,(.dft_mruf),(&6) 20 1-292 maclist object 21 1-293 vfd 18/.sf+flags.multics_request,18/.uf  22 1-294 maclist off  23 1-295 use calls  24 1-296 &U.call: epaq * 25 1-297 lprp4 7|stack_header.lot_ptr,*au  26 1-298 &=&4,&[ call6 &1$&1 27 1-299 &; call6 &4 28 1-300 &]  29 1-301 use names  30 1-302 &U.names: namelist &1&^=&2,&[,&2&]  31 1-303 maclist restore  32 1-304 &end  1-305  1-306 " 1-307  1-308 " Required ALM statements to make this all work 1-309  1-310 use tables 1-311 use calls  1-312 use names  1-313 use info  1-314 join /text/tables,calls,names,info 1-315  1-316 include stack_header  2-1 " BEGIN INCLUDE FILE ... stack_header.incl.alm 3/72 Bill Silver  2-2 "  2-3 " modified 7/76 by M. Weaver for *system links and more system use of areas 2-4 " modified 3/77 by M. Weaver to add rnt_ptr  2-5 " modified 7/77 by S. Webber to add run_unit_depth and assign_linkage_ptr  2-6 " modified 6/83 by J. Ives to add trace_frames and in_trace.  2-7  2-8 " HISTORY COMMENTS: 2-9 " 1) change(86-06-24,DGHowe), approve(86-06-24,MCR7396),  2-10 " audit(86-08-05,Schroth), install(86-11-03,MR12.0-1206):  2-11 " added the heap_header_ptr definition  2-12 " 2) change(86-08-12,Kissel), approve(86-08-12,MCR7473),  2-13 " audit(86-10-10,Fawcett), install(86-11-03,MR12.0-1206):  2-14 " Modified to support control point management. These changes were 2-15 " actually made in February 1985 by G. Palter.  2-16 " 3) change(86-10-22,Fawcett), approve(86-10-22,MCR7473),  2-17 " audit(86-10-22,Farley), install(86-11-03,MR12.0-1206):  2-18 " Remove the old_lot pointer and replace it with cpm_data_ptr. Use the 18  2-19 " bit pad after cur_lot_size for the cpm_enabled. This was done to save 2-20 " some space int the stack header and change the cpd_ptr unal to  2-21 " cpm_data_ptr (ITS pair).  2-22 " END HISTORY COMMENTS 2-23  000004 2-24 equ stack_header.cpm_data_ptr,4 ptr to control point for this stack  000006 2-25 equ stack_header.combined_stat_ptr,6 ptr to separate static area  2-26  000010 2-27 equ stack_header.clr_ptr,8 ptr to area containing linkage sections  000012 2-28 equ stack_header.max_lot_size,10 number of words allowed in lot (DU)  000012 2-29 equ stack_header.main_proc_invoked,10 nonzero if main proc was invoked in run unit (DL)  000012 2-30 equ stack_header.run_unit_depth,10 number of active run units stacked (DL) 000013 2-31 equ stack_header.cur_lot_size,11 DU number of words (entries) in lot  000013 2-32 equ stack_header.cpm_enabled,11 DL non-zero if control point management is enabled  000014 2-33 equ stack_header.system_free_ptr,12 ptr to system storage area 000016 2-34 equ stack_header.user_free_ptr,14 ptr to user storage area  2-35  000020 2-36 equ stack_header.parent_ptr,16 ptr to parent stack or null  000022 2-37 equ stack_header.stack_begin_ptr,18 ptr to first stack frame  000024 2-38 equ stack_header.stack_end_ptr,20 ptr to next useable stack frame 000026 2-39 equ stack_header.lot_ptr,22 ptr to the lot for the current ring  2-40  000030 2-41 equ stack_header.signal_ptr,24 ptr to signal proc for current ring  000032 2-42 equ stack_header.bar_mode_sp,26 value of sp before entering bar mode  000034 2-43 equ stack_header.pl1_operators_ptr,28 ptr: pl1_operators_$operator_table  000036 2-44 equ stack_header.call_op_ptr,30 ptr to standard call operator 2-45  000040 2-46 equ stack_header.push_op_ptr,32 ptr to standard push operator 000042 2-47 equ stack_header.return_op_ptr,34 ptr to standard return operator 000044 2-48 equ stack_header.ret_no_pop_op_ptr,36 ptr: stand. return/ no pop operator  000046 2-49 equ stack_header.entry_op_ptr,38 ptr to standard entry operator  2-50  000050 2-51 equ stack_header.trans_op_tv_ptr,40 ptr to table of translator operator ptrs  000052 2-52 equ stack_header.isot_ptr,42 pointer to ISOT  000054 2-53 equ stack_header.sct_ptr,44 pointer to System Condition Table 000056 2-54 equ stack_header.unwinder_ptr,46 pointer to unwinder for current ring 2-55  000060 2-56 equ stack_header.sys_link_info_ptr,48 ptr to *system link name table  000062 2-57 equ stack_header.rnt_ptr,50 ptr to reference name table  000064 2-58 equ stack_header.ect_ptr,52 ptr to event channel table  000066 2-59 equ stack_header.assign_linkage_ptr,54 ptr to area for hcs_$assign_linkage calls  000070 2-60 equ stack_header.heap_header_ptr,56 ptr to heap header.  000072 2-61 equ stack_header.trace_frames,58 stack of trace_catch_ frames 000073 2-62 equ stach_header.trace_top_ptr,59 trace pointer  000074 2-63 equ stack_header.in_trace,60 trace antirecurse bit  000100 2-64 equ stack_header_end,64 length of stack header  2-65  2-66  2-67  2-68  000000 2-69 equ trace_frames.count,0 number of trace frames on stack  000001 2-70 equ trace_frames.top_ptr,1 packed pointer to top one  2-71  2-72 " The following constant is an offset within the pl1 operators table.  2-73 " It references a transfer vector table.  2-74  000551 2-75 bool tv_offset,551 2-76  2-77  2-78 " The following constants are offsets within this transfer vector table.  2-79  001170 2-80 equ call_offset,tv_offset+271  001171 2-81 equ push_offset,tv_offset+272  001172 2-82 equ return_offset,tv_offset+273  001173 2-83 equ return_no_pop_offset,tv_offset+274 001174 2-84 equ entry_offset,tv_offset+275 2-85  2-86  2-87 " END INCLUDE FILE stack_header.incl.alm  2-317  2-318 " END INCLUDE FILE ... ssu_request_macros.incl.alm  19  20 begin_table do_request_table_  000000 segdef do_request_table_  000000 aa 163 162 161 164 000001 aa 137 064 056 060 000002 aa 144 157 137 162 000003 aa 145 161 165 145 000004 aa 163 164 137 164 000005 aa 141 142 154 145 000006 aa 137 040 040 040 000007 aa 040 040 040 040 000010 aa 040 040 040 040 000011 aa 040 040 040 040 000006 000012 aa 000000 000000 000013 aa 000000 000000 000014 aa 000000 000000 000015 aa 000000 000000 000016 aa 000000 000000 000017 aa 000000 000000 000020 aa 000000 000014 21  22  23 request escape,  24 do_requests_$escape_request,  25 (esc),  26 (Change the escape character.),  27 flags.allow_command  000021 00 000065 000131 000022 0a 000435 000034 000023 aa 400000 000000 28  29 request file_output,  30 do_requests_$file_output_request, 31 (fo), 32 (Start copying output to a file.),  33 flags.allow_command  000024 00 000070 000152 000025 0a 000444 000037 000026 aa 400000 000000 34  35 request interrupt, 36 do_requests_$interrupt_request,  37 (int,break,brk,ip),  38 (Send an interrupt signal.),  39 flags.allow_command  000027 00 000073 000173 000030 0a 000454 000031 000031 aa 400000 000000 40  41 request modes, 42 do_requests_$modes_request,  43 (),  44 (Set dial_out modes.),  45 flags.allow_both  000032 00 000076 000244 000033 0a 000463 000023 000034 aa 600000 000000 46  47 request quit,  48 do_requests_$quit_request,  49 (q),  50 (Leave subsystem.),  51 flags.allow_command  000035 00 000101 000255 000036 0a 000470 000020 000037 aa 400000 000000 52  53 request revert_output, 54 do_requests_$revert_output_request,  55 (ro), 56 (Finish copying output to a file.),  57 flags.allow_command  000040 00 000104 000276 000041 0a 000474 000040 000042 aa 400000 000000 58  59 request send,  60 do_requests_$send_request,  61 (),  62 (Send arguments as if typed.),  63 flags.allow_command  000043 00 000107 000317 000044 0a 000504 000033 000045 aa 400000 000000 64  65 request send_file, 66 do_requests_$send_file_request,  67 (sf), 68 (Send file as if typed.), 69 flags.allow_command  000046 00 000112 000330 000047 0a 000513 000026 000050 aa 400000 000000 70  71 request switch_name,  72 do_requests_$switch_name_request, 73 (),  74 (Return name of I/O switch.), 75 flags.allow_both  000051 00 000115 000351 000052 0a 000521 000032 000053 aa 600000 000000 76  77 request wait,  78 do_requests_$wait_request,  79 (),  80 (Wait for data from foreign system.), 81 flags.allow_both  000054 00 000120 000362 000055 0a 000530 000042 000056 aa 600000 000000 82  83 " Tailor the standard table a bit.  84  85 unknown_request (ready_off,rdf)  000057 00 000123 000373 000060 aa 000000 000000 000061 aa 004000 000000 86 unknown_request (ready_on,rdn) 000062 00 000126 000414 000063 aa 000000 000000 000064 aa 004000 000000 87  88 end_table do_request_table_  89  90 end  NO LITERALS  NAME DEFINITIONS FOR ENTRY POINTS AND SEGDEFS 000542 5a 000003 000000 000543 5a 000032 600000 000544 aa 000000 000000 000545 55 000013 000002 000546 5a 000002 400003 000547 55 000006 000013 000550 aa 021 144 157 137 000551 aa 162 145 161 165 000552 aa 145 163 164 137 000553 aa 164 141 142 154 000554 aa 145 137 000 000 000555 55 000023 000003 000556 0a 000000 400000 000557 55 000016 000003 000560 aa 021 144 157 137 do_request_table_  000561 aa 162 145 161 165 000562 aa 145 163 164 137 000563 aa 164 141 142 154 000564 aa 145 137 000 000 000565 55 000002 000013 000566 6a 000000 400002 000567 55 000026 000003 000570 aa 014 163 171 155 symbol_table  000571 aa 142 157 154 137 000572 aa 164 141 142 154 000573 aa 145 000 000 000 DEFINITIONS HASH TABLE  000574 aa 000000 000015 000575 aa 000000 000000 000576 aa 000000 000000 000577 aa 000000 000000 000600 aa 000000 000000 000601 aa 000000 000000 000602 aa 000000 000000 000603 5a 000023 000000 000604 aa 000000 000000 000605 aa 000000 000000 000606 aa 000000 000000 000607 5a 000013 000000 000610 aa 000000 000000 000611 aa 000000 000000 EXTERNAL NAMES  000612 aa 017 165 156 153 unknown_request 000613 aa 156 157 167 156 000614 aa 137 162 145 161 000615 aa 165 145 163 164 000616 aa 004 163 163 165 ssu_  000617 aa 137 000 000 000 000620 aa 014 167 141 151 wait_request  000621 aa 164 137 162 145 000622 aa 161 165 145 163 000623 aa 164 000 000 000 000624 aa 023 163 167 151 switch_name_request 000625 aa 164 143 150 137 000626 aa 156 141 155 145 000627 aa 137 162 145 161 000630 aa 165 145 163 164 000631 aa 021 163 145 156 send_file_request  000632 aa 144 137 146 151 000633 aa 154 145 137 162 000634 aa 145 161 165 145 000635 aa 163 164 000 000 000636 aa 014 163 145 156 send_request  000637 aa 144 137 162 145 000640 aa 161 165 145 163 000641 aa 164 000 000 000 000642 aa 025 162 145 166 revert_output_request  000643 aa 145 162 164 137 000644 aa 157 165 164 160 000645 aa 165 164 137 162 000646 aa 145 161 165 145 000647 aa 163 164 000 000 000650 aa 014 161 165 151 quit_request  000651 aa 164 137 162 145 000652 aa 161 165 145 163 000653 aa 164 000 000 000 000654 aa 015 155 157 144 modes_request  000655 aa 145 163 137 162 000656 aa 145 161 165 145 000657 aa 163 164 000 000 000660 aa 021 151 156 164 interrupt_request  000661 aa 145 162 162 165 000662 aa 160 164 137 162 000663 aa 145 161 165 145 000664 aa 163 164 000 000 000665 aa 023 146 151 154 file_output_request 000666 aa 145 137 157 165 000667 aa 164 160 165 164 000670 aa 137 162 145 161 000671 aa 165 145 163 164 000672 aa 016 145 163 143 escape_request  000673 aa 141 160 145 137 000674 aa 162 145 161 165 000675 aa 145 163 164 000 000676 aa 014 144 157 137 do_requests_  000677 aa 162 145 161 165 000700 aa 145 163 164 163 000701 aa 137 000 000 000 NO TRAP POINTER WORDS  TYPE PAIR BLOCKS  000702 aa 000004 000000 000703 55 000054 000050 000704 aa 000004 000000 000705 55 000134 000056 000706 aa 000004 000000 000707 55 000134 000062 000710 aa 000004 000000 000711 55 000134 000067 000712 aa 000004 000000 000713 55 000134 000074 000714 aa 000004 000000 000715 55 000134 000100 000716 aa 000004 000000 000717 55 000134 000106 000720 aa 000004 000000 000721 55 000134 000112 000722 aa 000004 000000 000723 55 000134 000116 000724 aa 000004 000000 000725 55 000134 000123 000726 aa 000004 000000 000727 55 000134 000130 000730 aa 000001 000000 000731 aa 000000 000000 INTERNAL EXPRESSION WORDS 000732 5a 000140 000000 000733 5a 000142 000000 000734 5a 000144 000000 000735 5a 000146 000000 000736 5a 000150 000000 000737 5a 000152 000000 000740 5a 000154 000000 000741 5a 000156 000000 000742 5a 000160 000000 000743 5a 000162 000000 000744 5a 000164 000000 000745 aa 000000 000000 LINKAGE INFORMATION 000000 aa 000000 000000 000001 0a 000542 000000 000002 aa 000000 000000 000003 aa 000000 000000 000004 aa 000000 000000 000005 aa 000000 000000 000006 22 000010 000036 000007 a2 000000 000000 000010 9a 777770 0000 46 do_requests_|escape_request 000011 5a 000202 0000 00 000012 9a 777766 0000 46 do_requests_|file_output_request  000013 5a 000201 0000 00 000014 9a 777764 0000 46 do_requests_|interrupt_request  000015 5a 000200 0000 00 000016 9a 777762 0000 46 do_requests_|modes_request  000017 5a 000177 0000 00 000020 9a 777760 0000 46 do_requests_|quit_request  000021 5a 000176 0000 00 000022 9a 777756 0000 46 do_requests_|revert_output_request  000023 5a 000175 0000 00 000024 9a 777754 0000 46 do_requests_|send_request  000025 5a 000174 0000 00 000026 9a 777752 0000 46 do_requests_|send_file_request  000027 5a 000173 0000 00 000030 9a 777750 0000 46 do_requests_|switch_name_request  000031 5a 000172 0000 00 000032 9a 777746 0000 46 do_requests_|wait_request  000033 5a 000171 0000 00 000034 9a 777744 0000 46 ssu_|unknown_request  000035 5a 000170 0000 00 SYMBOL INFORMATION SYMBOL TABLE HEADER  000000 aa 000000 000001 000001 aa 163171 155142 000002 aa 164162 145145 000003 aa 000000 000004 000004 aa 000000 114732 000005 aa 732732 062314 000006 aa 000000 114775 000007 aa 661523 076170 000010 aa 141154 155040 000011 aa 040040 040040 000012 aa 000024 000040 000013 aa 000034 000040 000014 aa 000044 000100 000015 aa 000002 000002 000016 aa 000064 000000 000017 aa 000000 000224 000020 aa 000000 000150 000021 aa 000000 000205 000022 aa 000214 000150 000023 aa 000064 000000 000024 aa 101114 115040 000025 aa 126145 162163 000026 aa 151157 156040 000027 aa 040066 056067 000030 aa 040040 117143 000031 aa 164157 142145 000032 aa 162040 061071 000033 aa 070066 040040 000034 aa 107112 157150 000035 aa 156163 157156 000036 aa 056123 171163 000037 aa 115141 151156 000040 aa 164056 141040 000041 aa 040040 040040 000042 aa 040040 040040 000043 aa 040040 040040 000044 aa 154151 163164 000045 aa 040040 040040 000046 aa 040040 040040 000047 aa 040040 040040 000050 aa 040040 040040 000051 aa 040040 040040 000052 aa 040040 040040 000053 aa 040040 040040 000054 aa 040040 040040 000055 aa 040040 040040 000056 aa 040040 040040 000057 aa 040040 040040 000060 aa 040040 040040 000061 aa 040040 040040 000062 aa 040040 040040 000063 aa 040040 040040 000064 aa 000000 000001 000065 aa 000000 000003 000066 aa 000102 000066 000067 aa 147740 446201 000070 aa 000000 114774 000071 aa 460770 400000 000072 aa 000120 000050 000073 aa 133055 020064 000074 aa 000000 113310 000075 aa 612334 200000 000076 aa 000132 000066 000077 aa 147714 750316 000100 aa 000000 114774 000101 aa 453561 000000 000102 aa 076163 160145 >special_ldd>install>MR12.0-1206>do_request_table_.alm  000103 aa 143151 141154 000104 aa 137154 144144 000105 aa 076151 156163 000106 aa 164141 154154 000107 aa 076115 122061 000110 aa 062056 060055 000111 aa 061062 060066 000112 aa 076144 157137 000113 aa 162145 161165 000114 aa 145163 164137 000115 aa 164141 142154 000116 aa 145137 056141 000117 aa 154155 040040 000120 aa 076154 144144 >ldd>include>ssu_request_macros.incl.alm  000121 aa 076151 156143 000122 aa 154165 144145 000123 aa 076163 163165 000124 aa 137162 145161 000125 aa 165145 163164 000126 aa 137155 141143 000127 aa 162157 163056 000130 aa 151156 143154 000131 aa 056141 154155 000132 aa 076163 160145 >special_ldd>install>MR12.0-1206>stack_header.incl.alm  000133 aa 143151 141154 000134 aa 137154 144144 000135 aa 076151 156163 000136 aa 164141 154154 000137 aa 076115 122061 000140 aa 062056 060055 000141 aa 061062 060066 000142 aa 076163 164141 000143 aa 143153 137150 000144 aa 145141 144145 000145 aa 162056 151156 000146 aa 143154 056141 000147 aa 154155 040040 MULTICS ASSEMBLY CROSS REFERENCE LISTING Value Symbol Source file Line number  65 .._00000.call do_request_table_: 27.  435 .._00000.info do_request_table_: 27.  131 .._00000.names do_request_table_: 27.  70 .._00001.call do_request_table_: 33.  444 .._00001.info do_request_table_: 33.  152 .._00001.names do_request_table_: 33.  73 .._00002.call do_request_table_: 39.  454 .._00002.info do_request_table_: 39.  173 .._00002.names do_request_table_: 39.  76 .._00003.call do_request_table_: 45.  463 .._00003.info do_request_table_: 45.  244 .._00003.names do_request_table_: 45.  101 .._00004.call do_request_table_: 51.  470 .._00004.info do_request_table_: 51.  255 .._00004.names do_request_table_: 51.  104 .._00005.call do_request_table_: 57.  474 .._00005.info do_request_table_: 57.  276 .._00005.names do_request_table_: 57.  107 .._00006.call do_request_table_: 63.  504 .._00006.info do_request_table_: 63.  317 .._00006.names do_request_table_: 63.  112 .._00007.call do_request_table_: 69.  513 .._00007.info do_request_table_: 69.  330 .._00007.names do_request_table_: 69.  115 .._00010.call do_request_table_: 75.  521 .._00010.info do_request_table_: 75.  351 .._00010.names do_request_table_: 75.  120 .._00011.call do_request_table_: 81.  530 .._00011.info do_request_table_: 81.  362 .._00011.names do_request_table_: 81.  123 .._00012.call do_request_table_: 85.  373 .._00012.names do_request_table_: 85.  126 .._00013.call do_request_table_: 86.  414 .._00013.names do_request_table_: 86.  600000 .dft_mrsf do_request_table_: 20.  0 .dft_mruf do_request_table_: 20.  400000 .dft_sf do_request_table_: 20.  0 .dft_uf do_request_table_: 20, 27, 33, 39, 45, 51, 57, 63, 69, 75, 81.  151172 .rc do_request_table_: 20, 27, 33, 39, 45, 51, 57, 63, 69, 75, 81,  85, 86, 88.  600000 .sf do_request_table_: 27, 33, 39, 45, 51, 57, 63, 69, 75, 81. 0 .uf do_request_table_: 27, 33, 39, 45, 51, 57, 63, 69, 75, 81. 65 calls do_request_table_: 27, 33, 39, 45, 51, 57, 63, 69, 75, 81, 85,  86,  ssu_request_macros: 311, 314.  1170 call_offset stack_header: 80.  do_requests_ do_request_table_: 27, 33, 39, 45, 51, 57, 63, 69, 75, 81. 0 do_request_table_ do_request_table_: 20.  14 do_request_table_.rc do_request_table_: 20, 88. 1174 entry_offset stack_header: 84.  escape_request do_request_table_: 27.  file_output_request do_request_table_: 33.  200000 flags.allow_af do_request_table_: 20,  ssu_request_macros: 33. 600000 flags.allow_both do_request_table_: 45, 75, 81,  ssu_request_macros: 34. 400000 flags.allow_command do_request_table_: 20, 27, 33, 39, 51, 57, 63, 69, ssu_request_macros: 32. 10000 flags.dont_list ssu_request_macros: 40. 20000 flags.dont_summarize ssu_request_macros: 39. 40000 flags.multics_request ssu_request_macros: 37. 100000 flags.unimplemented ssu_request_macros: 36. 4000 flags.unknown do_request_table_: 85, 86, ssu_request_macros: 42. 435 info do_request_table_: 27, 33, 39, 45, 51, 57, 63, 69, 75, 81, ssu_request_macros: 313, 314.  interrupt_request do_request_table_: 39.  modes_request do_request_table_: 45.  131 names do_request_table_: 27, 33, 39, 45, 51, 57, 63, 69, 75, 81, 85,  86,  ssu_request_macros: 312, 314.  1171 push_offset stack_header: 81.  quit_request do_request_table_: 51.  1173 return_no_pop_offset stack_header: 83.  1172 return_offset stack_header: 82.  revert_output_request do_request_table_: 57.  send_file_request do_request_table_: 69.  send_request do_request_table_: 63.  ssu_ do_request_table_: 85, 86. 73 stach_header.trace_top_ptr stack_header: 62. 66 stack_header.assign_linkage_ptr stack_header: 59.  32 stack_header.bar_mode_sp stack_header: 42. 36 stack_header.call_op_ptr stack_header: 44. 10 stack_header.clr_ptr stack_header: 27.  6 stack_header.combined_stat_ptr stack_header: 25.  4 stack_header.cpm_data_ptr stack_header: 24. 13 stack_header.cpm_enabled stack_header: 32. 13 stack_header.cur_lot_size stack_header: 31. 64 stack_header.ect_ptr stack_header: 58.  46 stack_header.entry_op_ptr stack_header: 49. 70 stack_header.heap_header_ptr stack_header: 60. 74 stack_header.in_trace stack_header: 63.  52 stack_header.isot_ptr stack_header: 52.  26 stack_header.lot_ptr do_request_table_: 27, 33, 39, 45, 51, 57, 63, 69, 75, 81, 85,  86,  stack_header: 39.  12 stack_header.main_proc_invoked stack_header: 29.  12 stack_header.max_lot_size stack_header: 28. 20 stack_header.parent_ptr stack_header: 36.  34 stack_header.pl1_operators_ptr stack_header: 43.  40 stack_header.push_op_ptr stack_header: 46. 42 stack_header.return_op_ptr stack_header: 47. 44 stack_header.ret_no_pop_op_ptr stack_header: 48.  62 stack_header.rnt_ptr stack_header: 57.  12 stack_header.run_unit_depth stack_header: 30. 54 stack_header.sct_ptr stack_header: 53.  30 stack_header.signal_ptr stack_header: 41.  22 stack_header.stack_begin_ptr stack_header: 37. 24 stack_header.stack_end_ptr stack_header: 38. 14 stack_header.system_free_ptr stack_header: 33. 60 stack_header.sys_link_info_ptr stack_header: 56.  72 stack_header.trace_frames stack_header: 61. 50 stack_header.trans_op_tv_ptr stack_header: 51. 56 stack_header.unwinder_ptr stack_header: 54. 16 stack_header.user_free_ptr stack_header: 34. 100 stack_header_end stack_header: 64.  switch_name_request do_request_table_: 75.  0 tables do_request_table_: 20, 27, 33, 39, 45, 51, 57, 63, 69, 75, 81,  85, 86, ssu_request_macros: 310, 314.  0 trace_frames.count stack_header: 69.  1 trace_frames.top_ptr stack_header: 70.  551 tv_offset stack_header: 75, 80, 81, 82, 83, 84. unknown_request do_request_table_: 85, 86. wait_request do_request_table_: 81.  NO FATAL ERRORS  ----------------------------------------------------------- Historical Background This edition of the Multics software materials and documentation is provided and donated to Massachusetts Institute of Technology by Group BULL including BULL HN Information Systems Inc. as a contribution to computer science knowledge. This donation is made also to give evidence of the common contributions of Massachusetts Institute of Technology, Bell Laboratories, General Electric, Honeywell Information Systems Inc., Honeywell BULL Inc., Groupe BULL and BULL HN Information Systems Inc. to the development of this operating system. Multics development was initiated by Massachusetts Institute of Technology Project MAC (1963-1970), renamed the MIT Laboratory for Computer Science and Artificial Intelligence in the mid 1970s, under the leadership of Professor Fernando Jose Corbato. Users consider that Multics provided the best software architecture for managing computer hardware properly and for executing programs. Many subsequent operating systems incorporated Multics principles. Multics was distributed in 1975 to 2000 by Group Bull in Europe , and in the U.S. by Bull HN Information Systems Inc., as successor in interest by change in name only to Honeywell Bull Inc. and Honeywell Information Systems Inc. . ----------------------------------------------------------- Permission to use, copy, modify, and distribute these programs and their documentation for any purpose and without fee is hereby granted,provided that the below copyright notice and historical background appear in all copies and that both the copyright notice and historical background and this permission notice appear in supporting documentation, and that the names of MIT, HIS, BULL or BULL HN not be used in advertising or publicity pertaining to distribution of the programs without specific prior written permission. Copyright 1972 by Massachusetts Institute of Technology and Honeywell Information Systems Inc. Copyright 2006 by BULL HN Information Systems Inc. Copyright 2006 by Bull SAS All Rights Reserved