The following editor commands can be used to customize the way EAGLE works. They can be given either directly from an editor window's command line, or in the eagle.scr file.
User Interface
Command menu | MENU command..; |
Assign keys | ASSIGN function_key command..; |
Snap function | SET SNAP_LENGTH number; |
SET SNAP_BENDED ON | OFF; | |
SET SELECT_FACTOR value; | |
Content of menus | SET USED_LAYERS name | number; |
SET WIDTH_MENU value..; | |
SET DIAMETER_MENU value..; | |
SET DRILL_MENU value..; | |
SET SMD_MENU value..; | |
SET SIZE_MENU value..; | |
Wire bend | SET WIRE_BEND bend_nr; |
Beep on/off | SET BEEP ON | OFF; |
Screen Display
Color for grid lines | SET COLOR_GRID color; |
Color for layer | SET COLOR_LAYER layer color; |
Fill style for layer | SET FILL_LAYER layer fill; |
Grid parameter | SET GRID_REDRAW ON | OFF; |
SET MIN_GRID_SIZE pixels; | |
Min. text size displayed | SET MIN_TEXT_SIZE size; |
Display of net lines | SET NET_WIRE_WIDTH width; |
Display of pads | SET DISPLAY_MODE REAL | NODRILL; |
SET PAD_NAMES ON | OFF; | |
Display of bus lines | SET BUS_WIRE_WIDTH width; |
DRC fill style | SET DRC_FILL fill_name; |
Polygon processing | SET POLYGON_RATSNEST ON | OFF; |
Vector font | SET VECTOR_FONT ON | OFF; |
Mode Parameters
Package check | SET CHECK_CONNECTS ON | OFF; |
Grid parameters | GRID options; |
Replace mode | SET REPLACE_SAME NAMES | COORDS; |
UNDO Buffer | SET UNDO_LOG ON | OFF; |
Wire Optimizing | SET OPTIMIZING ON | OFF; |
Net wire termination | SET AUTO_END_NET ON | OFF; |
Automatic junctions | SET AUTO_JUNCTION ON | OFF; |
Presettings
Pad shape | CHANGE SHAPE shape; |
Wire width | CHANGE WIDTH value; |
Pad/via diameter | CHANGE DIAMETER diameter; |
Pad/via/hole drill diam. | CHANGE DRILL value; |
Smd size | CHANGE SMD width height; |
Text height | CHANGE SIZE value; |
Text line width | CHANGE RATIO ratio; |
Text font | CHANGE FONT font; |
Polygon parameter | CHANGE THERMALS ON | OFF; |
Polygon parameter | CHANGE ORPHANS ON | OFF; |
Polygon parameter | CHANGE ISOLATE distance; |
Polygon parameter | CHANGE POUR SOLID | HATCH; |
Polygon parameter | CHANGE RANK value; |
Polygon parameter | CHANGE SPACING distance; |
Index | Copyright © 2005 CadSoft Computer GmbH |