| Christian H. Passow, M.S. '92 |
A
Study of Spray Forming Using Uniform Droplet Sprays |
| Honor J. Passow, M.S. '93 |
The
Effect of Imposed Vibrations On the Flow Rate of Highly-Concentrated, Shear-Thinning
Slurries |
| Godard Abel, M.S. '94 |
Characterization
of Droplet Flight Path and Mass Flux in Droplet-Based Manufacturing |
| Sucharita Sahu, M.S. '94 |
Thermal
State of Sn-Pb Droplets in the Droplet-Based Manufacturing Process |
| Paul J. Acquaviva, M.S. '95 |
Modeling of Deposit
Solidification in Droplet Based Manufacturing |
| Chen-An Chen, Ph.D. '96 |
Droplet Solidification
and its Effects on Deposit Microstructure in the Uniform Droplet Spray
Process |
| Pyongwon Yim, Ph.D. '96 |
The Role of Surface
Oxidation in the Break-Up of Laminar Liquid Metal Jets |
| Ho-Young Kim, M.S. '96 |
Microsensor
Development for the Study of Droplet Spreading |
| Wesley H. Williams, S.B. '96 |
Production of Uniform
Bronze Powders by the Uniform Droplet Spray Process |
| Jeanie Cherng, M.S. '97 |
Solidification
and Cooling Analysis of Aluminum Alloy Droplets with the Uniform Droplet
Spray Process |
| Jiun-Yu Lai, M.S. '97 |
A
Study of the Fabrication of Thin Lamination Stator Cores by the Uniform
Droplet Spray Process-Full
Thesis Available |
| Juan-Carlos Rocha Alvarez, M.S.
'97 |
Control of the UDS
Process for the Production of Solder Balls for BGA Electronics Packaging
|
| Sukyoung Chey, Ph.D. '00 |
A Study of Surface Porosity Formation in Deposits
Sprayed onto Flat Substrates by the Uniform Droplet Spray Process |
| Jennifer Shin, B.S. '98 |
Rapid Prototyping
Using the Uniform Droplet Spray Process |
| Ho-Young Kim, Ph.D. '99 |
Spreading
Behavior of Molten Metal Microdroplets-Full
Thesis Available |
| Tasos Karahalios, S.B. '99 |
Sensor
Investigation of Microdroplet Spreading Behavior-Full
Thesis Available |
| Paul Pao-Hua Chai, S.B. '99 |
Study
of the Temperature Microsensors for Possible Applications in the UDS Process-Full
Thesis Available |
Jason Barnwell, S.B. '00
Samuel Thurston Towell S.B. '00 |
Evaluation
of Existing Mass Distribution Model For Multi-Orifice Flows-Full
Thesis Available
Evaluation
of an Adaptive Control Algorithm for use in Uniform Droplet Spray in Droplet
Based Manufacturing
|