git-diff-tree(1) Manual Page

Generate patch (see [generate_patch_text_with_p]).

Suppress all output from the diff machinery. Useful for commands like git show that show the patch by default to squelch their output, or to cancel the effect of options like --patch, --stat earlier on the command line in an alias.

Generate diffs with <n> lines of context instead of the usual three. Implies --patch.

Output to a specific file instead of stdout.

Specify the character used to indicate new, old or context lines in the generated patch. Normally they are +, - and ' ' respectively.

Generate the diff in raw format. This is the default.

Synonym for -p --raw.

Enable the heuristic that shifts diff hunk boundaries to make patches easier to read. This is the default.

Disable the indent heuristic.

Spend extra time to make sure the smallest possible diff is produced.

Generate a diff using the "patience diff" algorithm.

Generate a diff using the "histogram diff" algorithm.

Generate a diff using the "anchored diff" algorithm.

Choose a diff algorithm. The variants are as follows:

Generate a diffstat. By default, as much space as necessary will be used for the filename part, and the rest for the graph part. Maximum width defaults to terminal width, or 80 columns if not connected to a terminal, and can be overridden by <width>. The width of the filename part can be limited by giving another width <name-width> after a comma or by setting diff.statNameWidth=<width>. The width of the graph part can be limited by using --stat-graph-width=<width> or by setting diff.statGraphWidth=<width>. Using --stat or --stat-graph-width affects all commands generating a stat graph, while setting diff.statNameWidth or diff.statGraphWidth does not affect git format-patch. By giving a third parameter <count>, you can limit the output to the first <count> lines, followed by ... if there are more.

Output a condensed summary of extended header information such as file creations or deletions ("new" or "gone", optionally "+l" if it’s a symlink) and mode changes ("+x" or "-x" for adding or removing executable bit respectively) in diffstat. The information is put between the filename part and the graph part. Implies --stat.

Similar to --stat, but shows number of added and deleted lines in decimal notation and pathname without abbreviation, to make it more machine friendly. For binary files, outputs two - instead of saying 0 0.

Output only the last line of the --stat format containing total number of modified files, as well as number of added and deleted lines.

Output the distribution of relative amount of changes for each sub-directory. The behavior of --dirstat can be customized by passing it a comma separated list of parameters. The defaults are controlled by the diff.dirstat configuration variable (see git-config(1)). The following parameters are available:

Synonym for --dirstat=cumulative

Synonym for --dirstat=files,<param1>,<param2>…

Output a condensed summary of extended header information such as creations, renames and mode changes.

Synonym for -p --stat.

When --raw, --numstat, --name-only or --name-status has been given, do not munge pathnames and use NULs as output field terminators.

Show only the name of each changed file in the post-image tree. The file names are often encoded in UTF-8. For more information see the discussion about encoding in the git-log(1) manual page.

Show only the name(s) and status of each changed file. See the description of the --diff-filter option on what the status letters mean. Just like --name-only the file names are often encoded in UTF-8.

Specify how differences in submodules are shown. When specifying --submodule=short the short format is used. This format just shows the names of the commits at the beginning and end of the range. When --submodule or --submodule=log is specified, the log format is used. This format lists the commits in the range like git-submodule(1) summary does. When --submodule=diff is specified, the diff format is used. This format shows an inline diff of the changes in the submodule contents between the commit range. Defaults to diff.submodule or the short format if the config option is unset.

Show colored diff. --color (i.e. without =<when>) is the same as --color=always. <when> can be one of always, never, or auto.

Turn off colored diff. It is the same as --color=never.

Moved lines of code are colored differently. The <mode> defaults to no if the option is not given and to zebra if the option with no mode is given. The mode must be one of:

Turn off move detection. This can be used to override configuration settings. It is the same as --color-moved=no.

This configures how whitespace is ignored when performing the move detection for --color-moved. These modes can be given as a comma separated list:

Do not ignore whitespace when performing move detection. This can be used to override configuration settings. It is the same as --color-moved-ws=no.

Show a word diff, using the <mode> to delimit changed words. By default, words are delimited by whitespace; see --word-diff-regex below. The <mode> defaults to plain, and must be one of:

Use <regex> to decide what a word is, instead of considering runs of non-whitespace to be a word. Also implies --word-diff unless it was already enabled.

Equivalent to --word-diff=color plus (if a regex was specified) --word-diff-regex=<regex>.

Turn off rename detection, even when the configuration file gives the default to do so.

Whether to use empty blobs as rename source.

Warn if changes introduce conflict markers or whitespace errors. What are considered whitespace errors is controlled by core.whitespace configuration. By default, trailing whitespaces (including lines that consist solely of whitespaces) and a space character that is immediately followed by a tab character inside the initial indent of the line are considered whitespace errors. Exits with non-zero status if problems are found. Not compatible with --exit-code.

Highlight whitespace errors in the context, old or new lines of the diff. Multiple values are separated by comma, none resets previous values, default reset the list to new and all is a shorthand for old,new,context. When this option is not given, and the configuration variable diff.wsErrorHighlight is not set, only whitespace errors in new lines are highlighted. The whitespace errors are colored with color.diff.whitespace.

Instead of the first handful of characters, show the full pre- and post-image blob object names on the "index" line when generating patch format output.

In addition to --full-index, output a binary diff that can be applied with git-apply. Implies --patch.

Instead of showing the full 40-byte hexadecimal object name in diff-raw format output and diff-tree header lines, show the shortest prefix that is at least <n> hexdigits long that uniquely refers the object. In diff-patch output format, --full-index takes higher precedence, i.e. if --full-index is specified, full blob names will be shown regardless of --abbrev. Non default number of digits can be specified with --abbrev=<n>.

Break complete rewrite changes into pairs of delete and create. This serves two purposes:

Detect renames. If n is specified, it is a threshold on the similarity index (i.e. amount of addition/deletions compared to the file’s size). For example, -M90% means Git should consider a delete/add pair to be a rename if more than 90% of the file hasn’t changed. Without a % sign, the number is to be read as a fraction, with a decimal point before it. I.e., -M5 becomes 0.5, and is thus the same as -M50%. Similarly, -M05 is the same as -M5%. To limit detection to exact renames, use -M100%. The default similarity index is 50%.

Detect copies as well as renames. See also --find-copies-harder. If n is specified, it has the same meaning as for -M<n>.

For performance reasons, by default, -C option finds copies only if the original file of the copy was modified in the same changeset. This flag makes the command inspect unmodified files as candidates for the source of copy. This is a very expensive operation for large projects, so use it with caution. Giving more than one -C option has the same effect.

Omit the preimage for deletes, i.e. print only the header but not the diff between the preimage and /dev/null. The resulting patch is not meant to be applied with patch or git apply; this is solely for people who want to just concentrate on reviewing the text after the change. In addition, the output obviously lacks enough information to apply such a patch in reverse, even manually, hence the name of the option.

The -M and -C options involve some preliminary steps that can detect subsets of renames/copies cheaply, followed by an exhaustive fallback portion that compares all remaining unpaired destinations to all relevant sources. (For renames, only remaining unpaired sources are relevant; for copies, all original sources are relevant.) For N sources and destinations, this exhaustive check is O(N^2). This option prevents the exhaustive portion of rename/copy detection from running if the number of source/destination files involved exceeds the specified number. Defaults to diff.renameLimit. Note that a value of 0 is treated as unlimited.

Select only files that are Added (A), Copied (C), Deleted (D), Modified (M), Renamed (R), have their type (i.e. regular file, symlink, submodule, …) changed (T), are Unmerged (U), are Unknown (X), or have had their pairing Broken (B). Any combination of the filter characters (including none) can be used. When * (All-or-none) is added to the combination, all paths are selected if there is any file that matches other criteria in the comparison; if there is no file that matches other criteria, nothing is selected.

Look for differences that change the number of occurrences of the specified string (i.e. addition/deletion) in a file. Intended for the scripter’s use.

Look for differences whose patch text contains added/removed lines that match <regex>.

+    return frotz(nitfol, two->ptr, 1, 0);
...
-    hit = frotz(nitfol, mf2.ptr, 1, 0);

Look for differences that change the number of occurrences of the specified object. Similar to -S, just the argument is different in that it doesn’t search for a specific string but for a specific object id.

When -S or -G finds a change, show all the changes in that changeset, not just the files that contain the change in <string>.

Treat the <string> given to -S as an extended POSIX regular expression to match.

Control the order in which files appear in the output. This overrides the diff.orderFile configuration variable (see git-config(1)). To cancel diff.orderFile, use -O/dev/null.

Discard the files before the named <file> from the output (i.e. skip to), or move them to the end of the output (i.e. rotate to). These options were invented primarily for the use of the git difftool command, and may not be very useful otherwise.

Swap two inputs; that is, show differences from index or on-disk file to tree contents.

When run from a subdirectory of the project, it can be told to exclude changes outside the directory and show pathnames relative to it with this option. When you are not in a subdirectory (e.g. in a bare repository), you can name which subdirectory to make the output relative to by giving a <path> as an argument. --no-relative can be used to countermand both diff.relative config option and previous --relative.

Treat all files as text.

Ignore carriage-return at the end of line when doing a comparison.

Ignore changes in whitespace at EOL.

Ignore changes in amount of whitespace. This ignores whitespace at line end, and considers all other sequences of one or more whitespace characters to be equivalent.

Ignore whitespace when comparing lines. This ignores differences even if one line has whitespace where the other line has none.

Ignore changes whose lines are all blank.

Ignore changes whose all lines match <regex>. This option may be specified more than once.

Show the context between diff hunks, up to the specified number of lines, thereby fusing hunks that are close to each other. Defaults to diff.interHunkContext or 0 if the config option is unset.

Show whole function as context lines for each change. The function names are determined in the same way as git diff works out patch hunk headers (see Defining a custom hunk-header in gitattributes(5)).

Make the program exit with codes similar to diff(1). That is, it exits with 1 if there were differences and 0 means no differences.

Disable all output of the program. Implies --exit-code. Disables execution of external diff helpers whose exit code is not trusted, i.e. their respective configuration option diff.trustExitCode or diff.<driver>.trustExitCode or environment variable GIT_EXTERNAL_DIFF_TRUST_EXIT_CODE is false.

Allow an external diff helper to be executed. If you set an external diff driver with gitattributes(5), you need to use this option with git-log(1) and friends.

Disallow external diff drivers.

Allow (or disallow) external text conversion filters to be run when comparing binary files. See gitattributes(5) for details. Because textconv filters are typically a one-way conversion, the resulting diff is suitable for human consumption, but cannot be applied. For this reason, textconv filters are enabled by default only for git-diff(1) and git-log(1), but not for git-format-patch(1) or diff plumbing commands.

Ignore changes to submodules in the diff generation. <when> can be either "none", "untracked", "dirty" or "all", which is the default. Using "none" will consider the submodule modified when it either contains untracked or modified files or its HEAD differs from the commit recorded in the superproject and can be used to override any settings of the ignore option in git-config(1) or gitmodules(5). When "untracked" is used submodules are not considered dirty when they only contain untracked content (but they are still scanned for modified content). Using "dirty" ignores all changes to the work tree of submodules, only changes to the commits stored in the superproject are shown (this was the behavior until 1.7.0). Using "all" hides all changes to submodules.

Show the given source prefix instead of "a/".

Show the given destination prefix instead of "b/".

Do not show any source or destination prefix.

Use the default source and destination prefixes ("a/" and "b/"). This overrides configuration variables such as diff.noprefix, diff.srcPrefix, diff.dstPrefix, and diff.mnemonicPrefix (see git-config(1)).

Prepend an additional prefix to every line of output.

By default entries added by "git add -N" appear as an existing empty file in "git diff" and a new file in "git diff --cached". This option makes the entry appear as a new file in "git diff" and non-existent in "git diff --cached". This option could be reverted with --ita-visible-in-index. Both options are experimental and could be removed in future.

The id of a tree object.

If provided, the results are limited to a subset of files matching one of the provided pathspecs.

Recurse into sub-trees.

Show tree entry itself as well as subtrees. Implies -r.

When --root is specified the initial commit will be shown as a big creation event. This is equivalent to a diff against the NULL tree.

Instead of comparing the <tree-ish>s directly, use the merge base between the two <tree-ish>s as the "before" side. There must be two <tree-ish>s given and they must both be commits.

When --stdin is specified, the command does not take <tree-ish> arguments from the command line. Instead, it reads lines containing either two <tree>, one <commit>, or a list of <commit> from its standard input. (Use a single space as separator.)

By default, git diff-tree --stdin does not show differences for merge commits. With this flag, it shows differences to that commit from all of its parents. See also -c.

By default, git diff-tree --stdin shows differences, either in machine-readable form (without -p) or in patch form (with -p). This output can be suppressed. It is only useful with the -v flag.

This flag causes git diff-tree --stdin to also show the commit message before the differences.

Pretty-print the contents of the commit logs in a given format, where <format> can be one of oneline, short, medium, full, fuller, reference, email, raw, format:<string> and tformat:<string>. When <format> is none of the above, and has %placeholder in it, it acts as if --pretty=tformat:<format> were given.

Instead of showing the full 40-byte hexadecimal commit object name, show a prefix that names the object uniquely. "--abbrev=<n>" (which also modifies diff output, if it is displayed) option can be used to specify the minimum length of the prefix.

Show the full 40-byte hexadecimal commit object name. This negates --abbrev-commit, either explicit or implied by other options such as "--oneline". It also overrides the log.abbrevCommit variable.

This is a shorthand for "--pretty=oneline --abbrev-commit" used together.

Commit objects record the character encoding used for the log message in their encoding header; this option can be used to tell the command to re-code the commit log message in the encoding preferred by the user. For non plumbing commands this defaults to UTF-8. Note that if an object claims to be encoded in X and we are outputting in X, we will output the object verbatim; this means that invalid sequences in the original commit may be copied to the output. Likewise, if iconv(3) fails to convert the commit, we will quietly output the original object verbatim.

Perform a tab expansion (replace each tab with enough spaces to fill to the next display column that is a multiple of <n>) in the log message before showing it in the output. --expand-tabs is a short-hand for --expand-tabs=8, and --no-expand-tabs is a short-hand for --expand-tabs=0, which disables tab expansion.

Show the notes (see git-notes(1)) that annotate the commit, when showing the commit log message. This is the default for git log, git show and git whatchanged commands when there is no --pretty, --format, or --oneline option given on the command line.

Do not show notes. This negates the above --notes option, by resetting the list of notes refs from which notes are shown. Options are parsed in the order given on the command line, so e.g. "--notes --notes=foo --no-notes --notes=bar" will only show notes from "refs/notes/bar".

Show the default notes unless options for displaying specific notes are given.

These options are deprecated. Use the above --notes/--no-notes options instead.

Check the validity of a signed commit object by passing the signature to gpg --verify and show the output.

git diff-tree outputs a line with the commit ID when applicable. This flag suppresses the commit ID output.

This flag changes the way a merge commit is displayed (which means it is useful only when the command is given one <tree-ish>, or --stdin). It shows the differences from each of the parents to the merge result simultaneously instead of showing pairwise diff between a parent and the result one at a time (which is what the -m option does). Furthermore, it lists only files which were modified from all parents.

This flag changes the way a merge commit patch is displayed, in a similar way to the -c option. It implies the -c and -p options and further compresses the patch output by omitting uninteresting hunks whose contents in the parents have only two variants and the merge result picks one of them without modification. When all hunks are uninteresting, the commit itself and the commit log message are not shown, just like in any other "empty diff" case.

This flag causes combined diffs (used for merge commits) to list the name of the file from all parents. It thus only has effect when -c or --cc are specified, and is likely only useful if filename changes are detected (i.e. when either rename or copy detection have been requested).

Show the commit itself and the commit log message even if the diff itself is empty.

compares the <tree-ish> and the files on the filesystem.

compares the <tree-ish> and the index.

compares the trees named by the two arguments.

compares the index and the files on the filesystem.