ftape
driver under Linux. The ftape
driver interfaces to
QIC-40, QIC-80, QIC-3010 and QIC-3020 compatible drives only. The QIC-3010 and
QIC-3020 standards are also known as `Travan' (TR-2 and TR-3). These drives
connects via the floppy disk controller (FDC). It does not cover
SCSI or QIC-02 tape drives. DAT tape drives usually (always?) connect to a
SCSI controller.
This is but one of the Linux HOWTO documents. You can get an index of the
HOWTOs from
the Linux HOWTO index, while the real HOWTO's can be fetched (using ftp
) from
sunsite.unc.edu:pub/Linux/doc/HOWTO
(this is the ``official'' place)
or via the World Wide Web from
the Linux Documentation Project home page.
ftape
ftape
ftape
ftape
ftape
and floppies
ftape
ftape
tar
file on a tape
ftape
ftape
?
tar
?
ftape
DMA transfers gives ECC errors
insmod
says the kernel version is wrong
insmod
says that kernel 1.2.0 and 1.2.0 differ
ftape
says ``This tape has no 'Linux raw format'
''
tar
/mt
/cpio
/dd
binaries/sources/manpages?
tar
ftape
detects more bad sectors than DOS on QIC-3020 tapes
ftape
driverftape
crashes on me when I do `...' - is that a bug?