Struct std::collections::HashMap1.0.0 [] [src]

pub struct HashMap<K, V, S = RandomState> { /* fields omitted */ }

A hash map implemented with linear probing and Robin Hood bucket stealing.

By default, HashMap uses a hashing algorithm selected to provide resistance against HashDoS attacks. The algorithm is randomly seeded, and a reasonable best-effort is made to generate this seed from a high quality, secure source of randomness provided by the host without blocking the program. Because of this, the randomness of the seed depends on the output quality of the system's random number generator when the seed is created. In particular, seeds generated when the system's entropy pool is abnormally low such as during system boot may be of a lower quality.

The default hashing algorithm is currently SipHash 1-3, though this is subject to change at any point in the future. While its performance is very competitive for medium sized keys, other hashing algorithms will outperform it for small keys such as integers as well as large keys such as long strings, though those algorithms will typically not protect against attacks such as HashDoS.

The hashing algorithm can be replaced on a per-HashMap basis using the default, with_hasher, and with_capacity_and_hasher methods. Many alternative algorithms are available on crates.io, such as the fnv crate.

It is required that the keys implement the Eq and Hash traits, although this can frequently be achieved by using #[derive(PartialEq, Eq, Hash)]. If you implement these yourself, it is important that the following property holds:

k1 == k2 -> hash(k1) == hash(k2)

In other words, if two keys are equal, their hashes must be equal.

It is a logic error for a key to be modified in such a way that the key's hash, as determined by the Hash trait, or its equality, as determined by the Eq trait, changes while it is in the map. This is normally only possible through Cell, RefCell, global state, I/O, or unsafe code.

Relevant papers/articles:

  1. Pedro Celis. "Robin Hood Hashing"
  2. Emmanuel Goossaert. "Robin Hood hashing"
  3. Emmanuel Goossaert. "Robin Hood hashing: backward shift deletion"

Examples

use std::collections::HashMap;

// type inference lets us omit an explicit type signature (which
// would be `HashMap<&str, &str>` in this example).
let mut book_reviews = HashMap::new();

// review some books.
book_reviews.insert("Adventures of Huckleberry Finn",    "My favorite book.");
book_reviews.insert("Grimms' Fairy Tales",               "Masterpiece.");
book_reviews.insert("Pride and Prejudice",               "Very enjoyable.");
book_reviews.insert("The Adventures of Sherlock Holmes", "Eye lyked it alot.");

// check for a specific one.
if !book_reviews.contains_key("Les Misérables") {
    println!("We've got {} reviews, but Les Misérables ain't one.",
             book_reviews.len());
}

// oops, this review has a lot of spelling mistakes, let's delete it.
book_reviews.remove("The Adventures of Sherlock Holmes");

// look up the values associated with some keys.
let to_find = ["Pride and Prejudice", "Alice's Adventure in Wonderland"];
for book in &to_find {
    match book_reviews.get(book) {
        Some(review) => println!("{}: {}", book, review),
        None => println!("{} is unreviewed.", book)
    }
}

// iterate over everything.
for (book, review) in &book_reviews {
    println!("{}: \"{}\"", book, review);
}Run

HashMap also implements an Entry API, which allows for more complex methods of getting, setting, updating and removing keys and their values:

use std::collections::HashMap;

// type inference lets us omit an explicit type signature (which
// would be `HashMap<&str, u8>` in this example).
let mut player_stats = HashMap::new();

fn random_stat_buff() -> u8 {
    // could actually return some random value here - let's just return
    // some fixed value for now
    42
}

// insert a key only if it doesn't already exist
player_stats.entry("health").or_insert(100);

// insert a key using a function that provides a new value only if it
// doesn't already exist
player_stats.entry("defence").or_insert_with(random_stat_buff);

// update a key, guarding against the key possibly not being set
let stat = player_stats.entry("attack").or_insert(100);
*stat += random_stat_buff();Run

The easiest way to use HashMap with a custom type as key is to derive Eq and Hash. We must also derive PartialEq.

use std::collections::HashMap;

#[derive(Hash, Eq, PartialEq, Debug)]
struct Viking {
    name: String,
    country: String,
}

impl Viking {
    /// Create a new Viking.
    fn new(name: &str, country: &str) -> Viking {
        Viking { name: name.to_string(), country: country.to_string() }
    }
}

// Use a HashMap to store the vikings' health points.
let mut vikings = HashMap::new();

vikings.insert(Viking::new("Einar", "Norway"), 25);
vikings.insert(Viking::new("Olaf", "Denmark"), 24);
vikings.insert(Viking::new("Harald", "Iceland"), 12);

// Use derived implementation to print the status of the vikings.
for (viking, health) in &vikings {
    println!("{:?} has {} hp", viking, health);
}Run

A HashMap with fixed list of elements can be initialized from an array:

use std::collections::HashMap;

fn main() {
    let timber_resources: HashMap<&str, i32> =
    [("Norway", 100),
     ("Denmark", 50),
     ("Iceland", 10)]
     .iter().cloned().collect();
    // use the values stored in map
}Run

Methods

impl<K: Hash + Eq, V> HashMap<K, V, RandomState>
[src]

[src]

Creates an empty HashMap.

The hash map is initially created with a capacity of 0, so it will not allocate until it is first inserted into.

Examples

use std::collections::HashMap;
let mut map: HashMap<&str, isize> = HashMap::new();Run

[src]

Creates an empty HashMap with the specified capacity.

The hash map will be able to hold at least capacity elements without reallocating. If capacity is 0, the hash map will not allocate.

Examples

use std::collections::HashMap;
let mut map: HashMap<&str, isize> = HashMap::with_capacity(10);Run

impl<K, V, S> HashMap<K, V, S> where
    K: Eq + Hash,
    S: BuildHasher
[src]

1.7.0
[src]

Creates an empty HashMap which will use the given hash builder to hash keys.

The created map has the default initial capacity.

Warning: hash_builder is normally randomly generated, and is designed to allow HashMaps to be resistant to attacks that cause many collisions and very poor performance. Setting it manually using this function can expose a DoS attack vector.

Examples

use std::collections::HashMap;
use std::collections::hash_map::RandomState;

let s = RandomState::new();
let mut map = HashMap::with_hasher(s);
map.insert(1, 2);Run

1.7.0
[src]

Creates an empty HashMap with the specified capacity, using hash_builder to hash the keys.

The hash map will be able to hold at least capacity elements without reallocating. If capacity is 0, the hash map will not allocate.

Warning: hash_builder is normally randomly generated, and is designed to allow HashMaps to be resistant to attacks that cause many collisions and very poor performance. Setting it manually using this function can expose a DoS attack vector.

Examples

use std::collections::HashMap;
use std::collections::hash_map::RandomState;

let s = RandomState::new();
let mut map = HashMap::with_capacity_and_hasher(10, s);
map.insert(1, 2);Run

Important traits for &'a mut I
1.9.0
[src]

Returns a reference to the map's BuildHasher.

Examples

use std::collections::HashMap;
use std::collections::hash_map::RandomState;

let hasher = RandomState::new();
let map: HashMap<isize, isize> = HashMap::with_hasher(hasher);
let hasher: &RandomState = map.hasher();Run

[src]

Returns the number of elements the map can hold without reallocating.

This number is a lower bound; the HashMap<K, V> might be able to hold more, but is guaranteed to be able to hold at least this many.

Examples

use std::collections::HashMap;
let map: HashMap<isize, isize> = HashMap::with_capacity(100);
assert!(map.capacity() >= 100);Run

[src]

Reserves capacity for at least additional more elements to be inserted in the HashMap. The collection may reserve more space to avoid frequent reallocations.

Panics

Panics if the new allocation size overflows usize.

Examples

use std::collections::HashMap;
let mut map: HashMap<&str, isize> = HashMap::new();
map.reserve(10);Run

[src]

Shrinks the capacity of the map as much as possible. It will drop down as much as possible while maintaining the internal rules and possibly leaving some space in accordance with the resize policy.

Examples

use std::collections::HashMap;

let mut map: HashMap<isize, isize> = HashMap::with_capacity(100);
map.insert(1, 2);
map.insert(3, 4);
assert!(map.capacity() >= 100);
map.shrink_to_fit();
assert!(map.capacity() >= 2);Run

Important traits for Keys<'a, K, V>
[src]

An iterator visiting all keys in arbitrary order. The iterator element type is &'a K.

Examples

use std::collections::HashMap;

let mut map = HashMap::new();
map.insert("a", 1);
map.insert("b", 2);
map.insert("c", 3);

for key in map.keys() {
    println!("{}", key);
}Run

Important traits for Values<'a, K, V>
[src]

An iterator visiting all values in arbitrary order. The iterator element type is &'a V.

Examples

use std::collections::HashMap;

let mut map = HashMap::new();
map.insert("a", 1);
map.insert("b", 2);
map.insert("c", 3);

for val in map.values() {
    println!("{}", val);
}Run

Important traits for ValuesMut<'a, K, V>
1.10.0
[src]

An iterator visiting all values mutably in arbitrary order. The iterator element type is &'a mut V.

Examples

use std::collections::HashMap;

let mut map = HashMap::new();

map.insert("a", 1);
map.insert("b", 2);
map.insert("c", 3);

for val in map.values_mut() {
    *val = *val + 10;
}

for val in map.values() {
    println!("{}", val);
}Run

Important traits for Iter<'a, K, V>
[src]

An iterator visiting all key-value pairs in arbitrary order. The iterator element type is (&'a K, &'a V).

Examples

use std::collections::HashMap;

let mut map = HashMap::new();
map.insert("a", 1);
map.insert("b", 2);
map.insert("c", 3);

for (key, val) in map.iter() {
    println!("key: {} val: {}", key, val);
}Run

Important traits for IterMut<'a, K, V>
[src]

An iterator visiting all key-value pairs in arbitrary order, with mutable references to the values. The iterator element type is (&'a K, &'a mut V).

Examples

use std::collections::HashMap;

let mut map = HashMap::new();
map.insert("a", 1);
map.insert("b", 2);
map.insert("c", 3);

// Update all values
for (_, val) in map.iter_mut() {
    *val *= 2;
}

for (key, val) in &map {
    println!("key: {} val: {}", key, val);
}Run

[src]

Gets the given key's corresponding entry in the map for in-place manipulation.

Examples

use std::collections::HashMap;

let mut letters = HashMap::new();

for ch in "a short treatise on fungi".chars() {
    let counter = letters.entry(ch).or_insert(0);
    *counter += 1;
}

assert_eq!(letters[&'s'], 2);
assert_eq!(letters[&'t'], 3);
assert_eq!(letters[&'u'], 1);
assert_eq!(letters.get(&'y'), None);Run

[src]

Returns the number of elements in the map.

Examples

use std::collections::HashMap;

let mut a = HashMap::new();
assert_eq!(a.len(), 0);
a.insert(1, "a");
assert_eq!(a.len(), 1);Run

[src]

Returns true if the map contains no elements.

Examples

use std::collections::HashMap;

let mut a = HashMap::new();
assert!(a.is_empty());
a.insert(1, "a");
assert!(!a.is_empty());Run

Important traits for Drain<'a, K, V>
1.6.0
[src]

Clears the map, returning all key-value pairs as an iterator. Keeps the allocated memory for reuse.

Examples

use std::collections::HashMap;

let mut a = HashMap::new();
a.insert(1, "a");
a.insert(2, "b");

for (k, v) in a.drain().take(1) {
    assert!(k == 1 || k == 2);
    assert!(v == "a" || v == "b");
}

assert!(a.is_empty());Run

[src]

Clears the map, removing all key-value pairs. Keeps the allocated memory for reuse.

Examples

use std::collections::HashMap;

let mut a = HashMap::new();
a.insert(1, "a");
a.clear();
assert!(a.is_empty());Run

[src]

Returns a reference to the value corresponding to the key.

The key may be any borrowed form of the map's key type, but Hash and Eq on the borrowed form must match those for the key type.

Examples

use std::collections::HashMap;

let mut map = HashMap::new();
map.insert(1, "a");
assert_eq!(map.get(&1), Some(&"a"));
assert_eq!(map.get(&2), None);Run

[src]

Returns true if the map contains a value for the specified key.

The key may be any borrowed form of the map's key type, but Hash and Eq on the borrowed form must match those for the key type.

Examples

use std::collections::HashMap;

let mut map = HashMap::new();
map.insert(1, "a");
assert_eq!(map.contains_key(&1), true);
assert_eq!(map.contains_key(&2), false);Run

[src]

Returns a mutable reference to the value corresponding to the key.

The key may be any borrowed form of the map's key type, but Hash and Eq on the borrowed form must match those for the key type.

Examples

use std::collections::HashMap;

let mut map = HashMap::new();
map.insert(1, "a");
if let Some(x) = map.get_mut(&1) {
    *x = "b";
}
assert_eq!(map[&1], "b");Run

[src]

Inserts a key-value pair into the map.

If the map did not have this key present, None is returned.

If the map did have this key present, the value is updated, and the old value is returned. The key is not updated, though; this matters for types that can be == without being identical. See the module-level documentation for more.

Examples

use std::collections::HashMap;

let mut map = HashMap::new();
assert_eq!(map.insert(37, "a"), None);
assert_eq!(map.is_empty(), false);

map.insert(37, "b");
assert_eq!(map.insert(37, "c"), Some("b"));
assert_eq!(map[&37], "c");Run

[src]

Removes a key from the map, returning the value at the key if the key was previously in the map.

The key may be any borrowed form of the map's key type, but Hash and Eq on the borrowed form must match those for the key type.

Examples

use std::collections::HashMap;

let mut map = HashMap::new();
map.insert(1, "a");
assert_eq!(map.remove(&1), Some("a"));
assert_eq!(map.remove(&1), None);Run

[src]

🔬 This is a nightly-only experimental API. (hash_map_remove_entry #46344)

Removes a key from the map, returning the stored key and value if the key was previously in the map.

The key may be any borrowed form of the map's key type, but Hash and Eq on the borrowed form must match those for the key type.

Examples

#![feature(hash_map_remove_entry)]
use std::collections::HashMap;

let mut map = HashMap::new();
map.insert(1, "a");
assert_eq!(map.remove_entry(&1), Some((1, "a")));
assert_eq!(map.remove(&1), None);Run

1.18.0
[src]

Retains only the elements specified by the predicate.

In other words, remove all pairs (k, v) such that f(&k,&mut v) returns false.

Examples

use std::collections::HashMap;

let mut map: HashMap<isize, isize> = (0..8).map(|x|(x, x*10)).collect();
map.retain(|&k, _| k % 2 == 0);
assert_eq!(map.len(), 4);Run

Trait Implementations

impl<K: Clone, V: Clone, S: Clone> Clone for HashMap<K, V, S>
[src]

[src]

Returns a copy of the value. Read more

[src]

Performs copy-assignment from source. Read more

impl<K, V, S> PartialEq for HashMap<K, V, S> where
    K: Eq + Hash,
    V: PartialEq,
    S: BuildHasher
[src]

[src]

This method tests for self and other values to be equal, and is used by ==. Read more

[src]

This method tests for !=.

impl<K, V, S> Eq for HashMap<K, V, S> where
    K: Eq + Hash,
    V: Eq,
    S: BuildHasher
[src]

impl<K, V, S> Debug for HashMap<K, V, S> where
    K: Eq + Hash + Debug,
    V: Debug,
    S: BuildHasher
[src]

[src]

Formats the value using the given formatter. Read more

impl<K, V, S> Default for HashMap<K, V, S> where
    K: Eq + Hash,
    S: BuildHasher + Default
[src]

[src]

Creates an empty HashMap<K, V, S>, with the Default value for the hasher.

impl<'a, K, Q: ?Sized, V, S> Index<&'a Q> for HashMap<K, V, S> where
    K: Eq + Hash + Borrow<Q>,
    Q: Eq + Hash,
    S: BuildHasher
[src]

The returned type after indexing.

Important traits for &'a mut I
[src]

Returns a reference to the value corresponding to the supplied key.

Panics

Panics if the key is not present in the HashMap.

impl<'a, K, V, S> IntoIterator for &'a HashMap<K, V, S> where
    K: Eq + Hash,
    S: BuildHasher
[src]

The type of the elements being iterated over.

Which kind of iterator are we turning this into?

Important traits for Iter<'a, K, V>
[src]

Creates an iterator from a value. Read more

impl<'a, K, V, S> IntoIterator for &'a mut HashMap<K, V, S> where
    K: Eq + Hash,
    S: BuildHasher
[src]

The type of the elements being iterated over.

Which kind of iterator are we turning this into?

Important traits for IterMut<'a, K, V>
[src]

Creates an iterator from a value. Read more

impl<K, V, S> IntoIterator for HashMap<K, V, S> where
    K: Eq + Hash,
    S: BuildHasher
[src]

The type of the elements being iterated over.

Which kind of iterator are we turning this into?

Important traits for IntoIter<K, V>
[src]

Creates a consuming iterator, that is, one that moves each key-value pair out of the map in arbitrary order. The map cannot be used after calling this.

Examples

use std::collections::HashMap;

let mut map = HashMap::new();
map.insert("a", 1);
map.insert("b", 2);
map.insert("c", 3);

// Not possible with .iter()
let vec: Vec<(&str, isize)> = map.into_iter().collect();Run

impl<K, V, S> FromIterator<(K, V)> for HashMap<K, V, S> where
    K: Eq + Hash,
    S: BuildHasher + Default
[src]

[src]

Creates a value from an iterator. Read more

impl<K, V, S> Extend<(K, V)> for HashMap<K, V, S> where
    K: Eq + Hash,
    S: BuildHasher
[src]

[src]

Extends a collection with the contents of an iterator. Read more

impl<'a, K, V, S> Extend<(&'a K, &'a V)> for HashMap<K, V, S> where
    K: Eq + Hash + Copy,
    V: Copy,
    S: BuildHasher
1.4.0
[src]

[src]

Extends a collection with the contents of an iterator. Read more