com.dalsemi.onewire.container
Class OneWireContainer

java.lang.Object
  |
  +--com.dalsemi.onewire.container.OneWireContainer

Direct Known Subclasses:

OneWireContainer01, OneWireContainer02, OneWireContainer04, OneWireContainer05, OneWireContainer06, OneWireContainer08, OneWireContainer09, OneWireContainer0A, OneWireContainer0B, OneWireContainer0C, OneWireContainer0F, OneWireContainer10, OneWireContainer12, OneWireContainer13, OneWireContainer14, OneWireContainer16, OneWireContainer18, OneWireContainer1A, OneWireContainer1D, OneWireContainer1F, OneWireContainer20, OneWireContainer21, OneWireContainer22, OneWireContainer23, OneWireContainer24, OneWireContainer26, OneWireContainer27, OneWireContainer28, OneWireContainer2C, OneWireContainer30, OneWireContainer33

public class OneWireContainer

extends Object

A OneWireContainer encapsulates the DSPortAdapter, the 1-Wire® network address, and methods to manipulate a specific 1-Wire device. A 1-Wire device may be in the form of a stainless steel armored can, called an iButton®, or in standard IC plastic packaging.

General 1-Wire device container class with basic communication functions. This class should only be used if a device specific class is not available or known. Most OneWireContainer classes will extend this basic class.

1-Wire devices with memory can be accessed through the objects that are returned from the getMemoryBanks method. See the usage example below.

Usage

Example 1

Enumerate memory banks retrieved from the OneWireContainer instance 'owd' and cast to the highest interface. See the interface descriptions MemoryBank, PagedMemoryBank, and OTPMemoryBank for specific examples.

 
  MemoryBank      mb;
  PagedMemoryBank pg_mb;
  OTPMemoryBank   otp_mb;

  for(Enumeration bank_enum = owd.getMemoryBanks();
                      bank_enum.hasMoreElements(); )
  {
     // get the next memory bank, cast to MemoryBank
     mb = (MemoryBank)bank_enum.nextElement();

     // check if has paged services
     if (mb instanceof PagedMemoryBank)
         pg_mb = (PagedMemoryBank)mb;

     // check if has One-Time-Programable services
     if (mb instanceof OTPMemoryBank)
         otp_mb = (OTPMemoryBank)mb;
  }
  

Version:

0.00, 28 Aug 2000

See Also:

MemoryBank, PagedMemoryBank, OTPMemoryBank

Constructor Summary

OneWireContainer()
Create an empty container.

OneWireContainer(DSPortAdapter sourceAdapter, byte[] newAddress)
Create a container with a provided adapter object and the address of the iButton or 1-Wire device.

OneWireContainer(DSPortAdapter sourceAdapter, long newAddress)
Create a container with a provided adapter object and the address of the iButton or 1-Wire device.

OneWireContainer(DSPortAdapter sourceAdapter, String newAddress)
Create a container with a provided adapter object and the address of the iButton or 1-Wire device.

Method Summary

void	doSpeed() Go to the specified speed for this container.
DSPortAdapter	getAdapter() Retrieves the port adapter object used to create this container.
byte[]	getAddress() Gets the 1-Wire Network address of this device as an array of bytes.
long	getAddressAsLong() Gets this device's 1-Wire Network address as a long.
String	getAddressAsString() Gets this device's 1-Wire Network address as a String.
String	getAlternateNames() Retrieves the alternate Dallas Semiconductor part numbers or names.
String	getDescription() Retrieves a short description of the function of the 1-Wire device type.
int	getMaxSpeed() Returns the maximum speed this iButton or 1-Wire device can communicate at.
Enumeration	getMemoryBanks() Returns an Enumeration of MemoryBank.
String	getName() Retrieves the Dallas Semiconductor part number of the 1-Wire device as a String.
boolean	isAlarming() Verifies that the iButton or 1-Wire device is present on the 1-Wire Network and in an alarm state.
boolean	isPresent() Verifies that the iButton or 1-Wire device is present on the 1-Wire Network.
void	setSpeed(int newSpeed, boolean fallBack) Sets the maximum speed for this container.
void	setupContainer(DSPortAdapter sourceAdapter, byte[] newAddress) Provides this container with the adapter object used to access this device and the address of the iButton or 1-Wire device.
void	setupContainer(DSPortAdapter sourceAdapter, long newAddress) Provides this container with the adapter object used to access this device and the address of the iButton or 1-Wire device.
void	setupContainer(DSPortAdapter sourceAdapter, String newAddress) Provides this container with the adapter object used to access this device and the address of the iButton or 1-Wire device.

Methods inherited from class java.lang.Object

equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

OneWireContainer

public OneWireContainer()

Create an empty container. Must call setupContainer before using this new container.

This is one of the methods to construct a container. The others are through creating a OneWireContainer with parameters.

See Also:

OneWireContainer(DSPortAdapter,byte[]), OneWireContainer(DSPortAdapter,long), OneWireContainer(DSPortAdapter,String), setupContainer(DSPortAdapter,byte[]), setupContainer(DSPortAdapter,long), setupContainer(DSPortAdapter,String)

OneWireContainer

public OneWireContainer(DSPortAdapter sourceAdapter,
                        byte[] newAddress)

Create a container with a provided adapter object and the address of the iButton or 1-Wire device.

This is one of the methods to construct a container. The other is through creating a OneWireContainer with NO parameters.

Parameters:

sourceAdapter - adapter object required to communicate with this iButton.

newAddress - address of this 1-Wire device

See Also:

OneWireContainer(), Address

OneWireContainer

public OneWireContainer(DSPortAdapter sourceAdapter,
                        long newAddress)

Create a container with a provided adapter object and the address of the iButton or 1-Wire device.

This is one of the methods to construct a container. The other is through creating a OneWireContainer with NO parameters.

Parameters:

sourceAdapter - adapter object required to communicate with this iButton.

newAddress - address of this 1-Wire device

See Also:

OneWireContainer(), Address

OneWireContainer

public OneWireContainer(DSPortAdapter sourceAdapter,
                        String newAddress)

Create a container with a provided adapter object and the address of the iButton or 1-Wire device.

This is one of the methods to construct a container. The other is through creating a OneWireContainer with NO parameters.

Parameters:

sourceAdapter - adapter object required to communicate with this iButton.

newAddress - address of this 1-Wire device

See Also:

OneWireContainer(), Address

Method Detail

setupContainer

public void setupContainer(DSPortAdapter sourceAdapter,
                           byte[] newAddress)

Provides this container with the adapter object used to access this device and the address of the iButton or 1-Wire device.

Parameters:

sourceAdapter - adapter object required to communicate with this iButton

newAddress - address of this 1-Wire device

See Also:

Address

setupContainer

public void setupContainer(DSPortAdapter sourceAdapter,
                           long newAddress)

Provides this container with the adapter object used to access this device and the address of the iButton or 1-Wire device.

Parameters:

sourceAdapter - adapter object required to communicate with this iButton

newAddress - address of this 1-Wire device

See Also:

Address

setupContainer

public void setupContainer(DSPortAdapter sourceAdapter,
                           String newAddress)

Provides this container with the adapter object used to access this device and the address of the iButton or 1-Wire device.

Parameters:

sourceAdapter - adapter object required to communicate with this iButton

newAddress - address of this 1-Wire device

See Also:

Address

getAdapter

public DSPortAdapter getAdapter()

Retrieves the port adapter object used to create this container.

Returns:

port adapter instance

getName

public String getName()

Retrieves the Dallas Semiconductor part number of the 1-Wire device as a String. For example 'Crypto iButton' or 'DS1992'.

Returns:

1-Wire device name

getAlternateNames

public String getAlternateNames()

Retrieves the alternate Dallas Semiconductor part numbers or names. A 'family' of 1-Wire Network devices may have more than one part number depending on packaging. There can also be nicknames such as 'Crypto iButton'.

Returns:

1-Wire device alternate names

getDescription

public String getDescription()

Retrieves a short description of the function of the 1-Wire device type.

Returns:

device functional description

setSpeed

public void setSpeed(int newSpeed,
                     boolean fallBack)

Sets the maximum speed for this container. Note this may be slower then the devices maximum speed. This method can be used by an application to restrict the communication rate due 1-Wire line conditions.

Parameters:

newSpeed -

• 0 (SPEED_REGULAR) set to normal communciation speed
• 1 (SPEED_FLEX) set to flexible communciation speed used for long lines
• 2 (SPEED_OVERDRIVE) set to normal communciation speed to overdrive
• 3 (SPEED_HYPERDRIVE) set to normal communciation speed to hyperdrive
• >3 future speeds

fallBack - boolean indicating it is OK to fall back to a slower speed if true

getMaxSpeed

public int getMaxSpeed()

Returns the maximum speed this iButton or 1-Wire device can communicate at. Override this method if derived iButton type can go faster then SPEED_REGULAR(0).

Returns:

maximum speed

See Also:

DSPortAdapter.setSpeed(int)

getAddress

public byte[] getAddress()

Gets the 1-Wire Network address of this device as an array of bytes.

Returns:

1-Wire address

See Also:

Address

getAddressAsString

public String getAddressAsString()

Gets this device's 1-Wire Network address as a String.

Returns:

1-Wire address

See Also:

Address

getAddressAsLong

public long getAddressAsLong()

Gets this device's 1-Wire Network address as a long.

Returns:

1-Wire address

See Also:

Address

getMemoryBanks

public Enumeration getMemoryBanks()

Returns an Enumeration of MemoryBank. Default is no memory banks.

Returns:

enumeration of memory banks to read and write memory on this iButton or 1-Wire device

See Also:

MemoryBank

isPresent

public boolean isPresent()
                  throws OneWireIOException,
                         OneWireException

Verifies that the iButton or 1-Wire device is present on the 1-Wire Network.

Returns:

true if device present on the 1-Wire Network

Throws:

OneWireIOException - on a 1-Wire communication error such as a read back verification fails.

OneWireException - if adapter is not open

isAlarming

public boolean isAlarming()
                   throws OneWireIOException,
                          OneWireException

Verifies that the iButton or 1-Wire device is present on the 1-Wire Network and in an alarm state. This does not apply to all device types.

Returns:

true if device present and in alarm condition

Throws:

OneWireIOException - on a 1-Wire communication error such as a read back verification fails.

OneWireException - if adapter is not open

doSpeed

public void doSpeed()
             throws OneWireIOException,
                    OneWireException

Go to the specified speed for this container. This method uses the containers selected speed (method setSpeed(speed, fallback)) and will optionally fall back to a slower speed if communciation failed. Only call this method once to get the device into the desired speed as long as the device is still responding.

Throws:

OneWireIOException - WHEN selected speed fails and fallback is false

OneWireException - WHEN hypterdrive is selected speed

See Also:

setSpeed(int,boolean)