perlop


NAME

perlop - Perl operators and precedence


SYNOPSIS

Perl operators have the following associativity and precedence, listed from highest precedence to lowest. Note that all operators borrowed from C keep the same precedence relationship with each other, even where C's precedence is slightly screwy. (This makes learning Perl easier for C folks.) With very few exceptions, these all operate on scalar values only, not array values.

In the following sections, these operators are covered in precedence order.


DESCRIPTION

Terms and List Operators (Leftward)

Any TERM is of highest precedence of Perl. These includes variables, quote and quotelike operators, any expression in parentheses, and any function whose arguments are parenthesized. Actually, there aren't really functions in this sense, just list operators and unary operators behaving as functions because you put parentheses around the arguments. These are all documented in the perlfunc manpage .

If any list operator ( print() , etc.) or any unary operator ( chdir() , etc.) is followed by a left parenthesis as the next token, the operator and arguments within parentheses are taken to be of highest precedence, just like a normal function call.

In the absence of parentheses, the precedence of list operators such as print , sort , or chmod is either very high or very low depending on whether you look at the left side of operator or the right side of it. For example, in

@ary = (1, 3, sort 4, 2); print @ary; # prints 1324

the commas on the right of the sort are evaluated before the sort, but the commas on the left are evaluated after. In other words, list operators tend to gobble up all the arguments that follow them, and then act like a simple TERM with regard to the preceding expression. Note that you have to be careful with parens:

# These evaluate exit before doing the print: print($foo, exit); # Obviously not what you want. print $foo, exit; # Nor is this. # These do the print before evaluating exit: (print $foo), exit; # This is what you want. print($foo), exit; # Or this. print ($foo), exit; # Or even this.

Also note that

print ($foo & 255) + 1, "\n";

probably doesn't do what you expect at first glance. See Named Unary Operators for more discussion of this.

Also parsed as terms are the do {} and eval {} constructs, as well as subroutine and method calls, and the anonymous constructors [] and {}.

See also Quote and Quotelike Operators toward the end of this section, as well as O Operators''.

The Arrow Operator

Just as in C and C++, ``->'' is an infix dereference operator. If the right side is either a [...] or {...} subscript, then the left side must be either a hard or symbolic reference to an array or hash (or a location capable of holding a hard reference, if it's an lvalue (assignable)). See the perlref manpage .

Otherwise, the right side is a method name or a simple scalar variable containing the method name, and the left side must either be an object (a blessed reference) or a class name (that is, a package name). See the perlobj manpage .

Autoincrement and Autodecrement

``++'' and ``--'' work as in C. That is, if placed before a variable, they increment or decrement the variable before returning the value, and if placed after, increment or decrement the variable after returning the value.

The autoincrement operator has a little extra built-in magic to it. If you increment a variable that is numeric, or that has ever been used in a numeric context, you get a normal increment. If, however, the variable has only been used in string contexts since it was set, and has a value that is not null and matches the pattern /^[a-zA-Z]*[0-9]*$/, the increment is done as a string, preserving each character within its range, with carry:

print ++($foo = '99'); # prints '100' print ++($foo = 'a0'); # prints 'a1' print ++($foo = 'Az'); # prints 'Ba' print ++($foo = 'zz'); # prints 'aaa'

The autodecrement operator is not magical.

Exponentiation

Binary ``**'' is the exponentiation operator. Note that it binds even more tightly than unary minus, so -2**4 is -(2**4), not (-2)**4. (This is implemented using C's pow(3) function, which actually works on doubles internally.)

Symbolic Unary Operators

Unary ``!'' performs logical negation, i.e. ``not''. See also not for a lower precedence version of this.

Unary ``-'' performs arithmetic negation if the operand is numeric. If the operand is an identifier, a string consisting of a minus sign concatenated with the identifier is returned. Otherwise, if the string starts with a plus or minus, a string starting with the opposite sign is returned. One effect of these rules is that -bareword is equivalent to ``-bareword''.

Unary ``~'' performs bitwise negation, i.e. 1's complement.

Unary ``+'' has no effect whatsoever, even on strings. It is useful syntactically for separating a function name from a parenthesized expression that would otherwise be interpreted as the complete list of function arguments. (See examples above under List Operators.)

Unary ``\'' creates a reference to whatever follows it. See the perlref manpage . Do not confuse this behavior with the behavior of backslash within a string, although both forms do convey the notion of protecting the next thing from interpretation.

Binding Operators

Binary ``=~'' binds a scalar expression to a pattern match. Certain operations search or modify the string $_ by default. This operator makes that kind of operation work on some other string. The right argument is a search pattern, substitution, or translation. The left argument is what is supposed to be searched, substituted, or translated instead of the default $_ . The return value indicates the success of the operation. (If the right argument is an expression rather than a search pattern, substitution, or translation, it is interpreted as a search pattern at run time. This is less efficient than an explicit search, since the pattern must be compiled every time the expression is evaluated--unless you've used /o.)

Binary ``!~'' is just like ``=~'' except the return value is negated in the logical sense.

Multiplicative Operators

Binary ``*'' multiplies two numbers.

Binary ``/'' divides two numbers.

Binary ``%'' computes the modulus of the two numbers.

Binary ``x'' is the repetition operator. In a scalar context, it returns a string consisting of the left operand repeated the number of times specified by the right operand. In a list context, if the left operand is a list in parens, it repeats the list.

print '-' x 80; # print row of dashes print "\t" x ($tab/8), ' ' x ($tab%8); # tab over @ones = (1) x 80; # a list of 80 1's @ones = (5) x @ones; # set all elements to 5

Additive Operators

Binary ``+'' returns the sum of two numbers.

Binary ``-'' returns the difference of two numbers.

Binary ``.'' concatenates two strings.

Shift Operators

Binary ``<<'' returns the value of its left argument shifted left by the number of bits specified by the right argument. Arguments should be integers.

Binary ``>>'' returns the value of its left argument shifted right by the number of bits specified by the right argument. Arguments should be integers.

Named Unary Operators

The various named unary operators are treated as functions with one argument, with optional parentheses. These include the filetest operators, like -f, -M , etc. See the perlfunc manpage .

If any list operator ( print() , etc.) or any unary operator ( chdir() , etc.) is followed by a left parenthesis as the next token, the operator and arguments within parentheses are taken to be of highest precedence, just like a normal function call. Examples:

chdir $foo || die; # (chdir $foo) || die chdir($foo) || die; # (chdir $foo) || die chdir ($foo) || die; # (chdir $foo) || die chdir +($foo) || die; # (chdir $foo) || die

but, because * is higher precedence than ||:

chdir $foo * 20; # chdir ($foo * 20) chdir($foo) * 20; # (chdir $foo) * 20 chdir ($foo) * 20; # (chdir $foo) * 20 chdir +($foo) * 20; # chdir ($foo * 20) rand 10 * 20; # rand (10 * 20) rand(10) * 20; # (rand 10) * 20 rand (10) * 20; # (rand 10) * 20 rand +(10) * 20; # rand (10 * 20)

See also ``List Operators''.

Relational Operators

Binary ``<'' returns true if the left argument is numerically less than the right argument.

Binary ``>'' returns true if the left argument is numerically greater than the right argument.

Binary ``<='' returns true if the left argument is numerically less than or equal to the right argument.

Binary ``>='' returns true if the left argument is numerically greater than or equal to the right argument.

Binary ``lt'' returns true if the left argument is stringwise less than the right argument.

Binary ``gt'' returns true if the left argument is stringwise greater than the right argument.

Binary ``le'' returns true if the left argument is stringwise less than or equal to the right argument.

Binary ``ge'' returns true if the left argument is stringwise greater than or equal to the right argument.

Equality Operators

Binary ``=='' returns true if the left argument is numerically equal to the right argument.

Binary ``!='' returns true if the left argument is numerically not equal to the right argument.

Binary ``<=>'' returns -1, 0, or 1 depending on whether the left argument is numerically less than, equal to, or greater than the right argument.

Binary ``eq'' returns true if the left argument is stringwise equal to the right argument.

Binary ``ne'' returns true if the left argument is stringwise not equal to the right argument.

Binary ``cmp'' returns -1, 0, or 1 depending on whether the left argument is stringwise less than, equal to, or greater than the right argument.

Bitwise And

Binary ``&'' returns its operators ANDed together bit by bit.

Bitwise Or and Exclusive Or

Binary ``|'' returns its operators ORed together bit by bit.

Binary ``^'' returns its operators XORed together bit by bit.

C-style Logical And

Binary ``&&'' performs a short-circuit logical AND operation. That is, if the left operand is false, the right operand is not even evaluated. Scalar or list context propagates down to the right operand if it is evaluated.

C-style Logical Or

Binary ``||'' performs a short-circuit logical OR operation. That is, if the left operand is true, the right operand is not even evaluated. Scalar or list context propagates down to the right operand if it is evaluated.

The || and && operators differ from C's in that, rather than returning 0 or 1, they return the last value evaluated. Thus, a reasonably portable way to find out the home directory (assuming it's not ``0'') might be:

$home = $ENV{'HOME'} || $ENV{'LOGDIR'} || (getpwuid($<))[7] || die "You're homeless!\n";

As more readable alternatives to && and ||, Perl provides ``and'' and ``or'' operators (see below). The short-circuit behavior is identical. The precedence of ``and'' and ``or'' is much lower, however, so that you can safely use them after a list operator without the need for parentheses:

unlink "alpha", "beta", "gamma" or gripe(), next LINE;

With the C-style operators that would have been written like this:

unlink("alpha", "beta", "gamma") || (gripe(), next LINE);

Range Operator

Binary ``..'' is the range operator, which is really two different operators depending on the context. In a list context, it returns an array of values counting (by ones) from the left value to the right value. This is useful for writing for (1..10) loops and for doing slice operations on arrays. Be aware that under the current implementation, a temporary array is created, so you'll burn a lot of memory if you write something like this:

for (1 .. 1_000_000) { # code }

In a scalar context, ``..'' returns a boolean value. The operator is bistable, like a flip-flop, and emulates the line-range (comma) operator of sed, awk, and various editors. Each ``..'' operator maintains its own boolean state. It is false as long as its left operand is false. Once the left operand is true, the range operator stays true until the right operand is true, AFTER which the range operator becomes false again. (It doesn't become false till the next time the range operator is evaluated. It can test the right operand and become false on the same evaluation it became true (as in awk), but it still returns true once. If you don't want it to test the right operand till the next evaluation (as in sed), use three dots (``...'') instead of two.) The right operand is not evaluated while the operator is in the ``false'' state, and the left operand is not evaluated while the operator is in the ``true'' state. The precedence is a little lower than || and &&. The value returned is either the null string for false, or a sequence number (beginning with 1) for true. The sequence number is reset for each range encountered. The final sequence number in a range has the string ``E0'' appended to it, which doesn't affect its numeric value, but gives you something to search for if you want to exclude the endpoint. You can exclude the beginning point by waiting for the sequence number to be greater than 1. If either operand of scalar ``..'' is a numeric literal, that operand is implicitly compared to the $. variable, the current line number. Examples:

As a scalar operator:

if (101 .. 200) { print; } # print 2nd hundred lines next line if (1 .. /^$/); # skip header lines s/^/> / if (/^$/ .. eof()); # quote body

As a list operator:

for (101 .. 200) { print; } # print $_ 100 times @foo = @foo[$[ .. $#foo]; # an expensive no-op @foo = @foo[$#foo-4 .. $#foo]; # slice last 5 items

The range operator (in a list context) makes use of the magical autoincrement algorithm if the operaands are strings. You can say

@alphabet = ('A' .. 'Z');

to get all the letters of the alphabet, or

$hexdigit = (0 .. 9, 'a' .. 'f')[$num & 15];

to get a hexadecimal digit, or

@z2 = ('01' .. '31'); print $z2[$mday];

to get dates with leading zeros. If the final value specified is not in the sequence that the magical increment would produce, the sequence goes until the next value would be longer than the final value specified.

Conditional Operator

Ternary ``?:'' is the conditional operator, just as in C. It works much like an if-then-else. If the argument before the ? is true, the argument before the : is returned, otherwise the argument after the : is returned. For example:

printf "I have %d dog%s.\n", $n, ($n == 1) ? '' : "s";

Scalar or list context propagates downward into the 2nd or 3rd argument, whichever is selected.

$a = $ok ? $b : $c; # get a scalar @a = $ok ? @b : @c; # get an array $a = $ok ? @b : @c; # oops, that's just a count!

The operator may be assigned to if both the 2nd and 3rd arguments are legal lvalues (meaning that you can assign to them):

($a_or_b ? $a : $b) = $c;

This is not necessarily guaranteed to contribute to the readability of your program.

Assignment Operators

``='' is the ordinary assignment operator.

Assignment operators work as in C. That is,

$a += 2;

is equivalent to

$a = $a + 2;

although without duplicating any side effects that dereferencing the lvalue might trigger, such as from tie() . Other assignment operators work similarly. The following are recognized:

    **=    +=    *=    &=    <<=    &&=
           -=    /=    |=    >>=    ||=
           .=    %=    ^=
                 x=

Note that while these are grouped by family, they all have the precedence of assignment.

Unlike in C, the assignment operator produces a valid lvalue. Modifying an assignment is equivalent to doing the assignment and then modifying the variable that was assigned to. This is useful for modifying a copy of something, like this:

($tmp = $global) =~ tr [A-Z] [a-z];

Likewise,

($a += 2) *= 3;

is equivalent to

$a += 2; $a *= 3;

Comma Operator

Binary ``,'' is the comma operator. In a scalar context it evaluates its left argument, throws that value away, then evaluates its right argument and returns that value. This is just like C's comma operator.

In a list context, it's just the list argument separator, and inserts both its arguments into the list.

The => digraph is mostly just a synonym for the comma operator. It's useful for documenting arguments that come in pairs. As of release 5.001, it also forces any word to the left of it to be interpreted as a string.

List Operators (Rightward)

On the right side of a list operator, it has very low precedence, such that it controls all comma-separated expressions found there. The only operators with lower precedence are the logical operators ``and'', ``or'', and ``not'', which may be used to evaluate calls to list operators without the need for extra parentheses:

open HANDLE, "filename" or die "Can't open: $!\n";

See also discussion of list operators in List Operators (Leftward).

Logical Not

Unary ``not'' returns the logical negation of the expression to its right. It's the equivalent of ``!'' except for the very low precedence.

Logical And

Binary ``and'' returns the logical conjunction of the two surrounding expressions. It's equivalent to && except for the very low precedence. This means that it short-circuits: i.e. the right expression is evaluated only if the left expression is true.

Logical or and Exclusive Or

Binary ``or'' returns the logical disjunction of the two surrounding expressions. It's equivalent to || except for the very low precedence. This means that it short-circuits: i.e. the right expression is evaluated only if the left expression is false.

Binary ``xor'' returns the exclusive-OR of the two surrounding expressions. It cannot short circuit, of course.

C Operators Missing From Perl

Here is what C has that Perl doesn't:

unary &
Address-of operator. (But see the ``\'' operator for taking a reference.)

unary *
Dereference-address operator. (Perl's prefix dereferencing operators are typed: $, @, %, and &.)

(TYPE)
Type casting operator.

.

Quote and Quotelike Operators

While we usually think of quotes as literal values, in Perl they function as operators, providing various kinds of interpolating and pattern matching capabilities. Perl provides customary quote characters for these behaviors, but also provides a way for you to choose your quote character for any of them. In the following table, a {} represents any pair of delimiters you choose. Non-bracketing delimiters use the same character fore and aft, but the 4 sorts of brackets (round, angle, square, curly) will all nest.

Customary Generic Meaning Interpolates '' q{} Literal no "" qq{} Literal yes `` qx{} Command yes qw{} Word list no // m{} Pattern match yes s{}{} Substitution yes tr{}{} Translation no

For constructs that do interpolation, variables beginning with ``$'' or ``@'' are interpolated, as are the following sequences:

\t tab \n newline \r return \f form feed \b backspace \a alarm (bell) \e escape \033 octal char \x1b hex char \c[ control char \l lowercase next char \u uppercase next char \L lowercase till \E \U uppercase till \E \E end case modification \Q quote regexp metacharacters till \E

Patterns are subject to an additional level of interpretation as a regular expression. This is done as a second pass, after variables are interpolated, so that regular expressions may be incorporated into the pattern from the variables. If this is not what you want, use \Q to interpolate a variable literally.

Apart from the above, there are no multiple levels of interpolation. In particular, contrary to the expectations of shell programmers, backquotes do NOT interpolate within double quotes, nor do single quotes impede evaluation of variables when used within double quotes.

Regexp Quotelike Operators

Here are the quotelike operators that apply to pattern matching and related activities.

?PATTERN?
This is just like the /pattern/ search, except that it matches only once between calls to the reset() operator. This is a useful optimization when you only want to see the first occurrence of something in each file of a set of files, for instance. Only ?? patterns local to the current package are reset.

This usage is vaguely deprecated, and may be removed in some future version of Perl.

m/PATTERN/gimosx

/PATTERN/gimosx
Searches a string for a pattern match, and in a scalar context returns true (1) or false (''). If no string is specified via the =~ or !~ operator, the $_ string is searched. (The string specified with =~ need not be an lvalue--it may be the result of an expression evaluation, but remember the =~ binds rather tightly.) See also the perlre manpage .

Options are:

If ``/'' is the delimiter then the initial m is optional. With the m you can use any pair of non-alphanumeric, non-whitespace characters as delimiters. This is particularly useful for matching Unix path names that contain ``/'', to avoid LTS (leaning toothpick syndrome).

PATTERN may contain variables, which will be interpolated (and the pattern recompiled) every time the pattern search is evaluated. (Note that $) and $| might not be interpolated because they look like end-of-string tests.) If you want such a pattern to be compiled only once, add a /o after the trailing delimiter. This avoids expensive run-time recompilations, and is useful when the value you are interpolating won't change over the life of the script. However, mentioning /o constitutes a promise that you won't change the variables in the pattern. If you change them, Perl won't even notice.

If the PATTERN evaluates to a null string, the last successfully executed regular expression is used instead.

If used in a context that requires a list value, a pattern match returns a list consisting of the subexpressions matched by the parentheses in the pattern, i.e. ($1, $2, $3...). (Note that here $1 etc. are also set, and that this differs from Perl 4's behavior.) If the match fails, a null array is returned. If the match succeeds, but there were no parentheses, a list value of (1) is returned.

Examples:

open(TTY, '/dev/tty'); <TTY> =~ /^y/i && foo(); # do foo if desired if (/Version: *([0-9.]*)/) { $version = $1; } next if m#^/usr/spool/uucp#; # poor man's grep $arg = shift; while (<>) { print if /$arg/o; # compile only once } if (($F1, $F2, $Etc) = ($foo =~ /^(\S+)\s+(\S+)\s*(.*)/))

This last example splits $foo into the first two words and the remainder of the line, and assigns those three fields to $F1, $F2 and $Etc. The conditional is true if any variables were assigned, i.e. if the pattern matched.

The /g modifier specifies global pattern matching--that is, matching as many times as possible within the string. How it behaves depends on the context. In a list context, it returns a list of all the substrings matched by all the parentheses in the regular expression. If there are no parentheses, it returns a list of all the matched strings, as if there were parentheses around the whole pattern.

In a scalar context, m//g iterates through the string, returning TRUE each time it matches, and FALSE when it eventually runs out of matches. (In other words, it remembers where it left off last time and restarts the search at that point. You can actually find the current match position of a string using the pos() function--see the perlfunc manpage .) If you modify the string in any way, the match position is reset to the beginning. Examples:

# list context ($one,$five,$fifteen) = (`uptime` =~ /(\d+\.\d+)/g); # scalar context $/ = ""; $* = 1; # $* deprecated in Perl 5 while ($paragraph = <>) { while ($paragraph =~ /[a-z]['")]*[.!?]+['")]*\s/g) { $sentences++; } } print "$sentences\n";

q/STRING/

'STRING'
A single-quoted, literal string. Backslashes are ignored, unless followed by the delimiter or another backslash, in which case the delimiter or backslash is interpolated.

$foo = q!I said, "You said, 'She said it.'"!; $bar = q('This is it.');

qq/STRING/

``STRING''
A double-quoted, interpolated string.

$_ .= qq (*** The previous line contains the naughty word "$1".\n) if /(tcl|rexx|python)/; # :-)

qx/STRING/

`STRING`
A string which is interpolated and then executed as a system command. The collected standard output of the command is returned. In scalar context, it comes back as a single (potentially multi-line) string. In list context, returns a list of lines (however you've defined lines with $/ or $INPUT_RECORD_SEPARATOR ).

$today = qx{ date };

See I/O Operators for more discussion.

qw/STRING/
Returns a list of the words extracted out of STRING, using embedded whitespace as the word delimiters. It is exactly equivalent to

split(' ', q/STRING/);

Some frequently seen examples:

use POSIX qw( setlocale localeconv ) @EXPORT = qw( foo bar baz );

s/PATTERN/REPLACEMENT/egimosx
Searches a string for a pattern, and if found, replaces that pattern with the replacement text and returns the number of substitutions made. Otherwise it returns false (0).

If no string is specified via the =~ or !~ operator, the $_ variable is searched and modified. (The string specified with =~ must be a scalar variable, an array element, a hash element, or an assignment to one of those, i.e. an lvalue.)

If the delimiter chosen is single quote, no variable interpolation is done on either the PATTERN or the REPLACEMENT. Otherwise, if the PATTERN contains a $ that looks like a variable rather than an end-of-string test, the variable will be interpolated into the pattern at run-time. If you only want the pattern compiled once the first time the variable is interpolated, use the /o option. If the pattern evaluates to a null string, the last successfully executed regular expression is used instead. See the perlre manpage for further explanation on these.

Options are:

Any non-alphanumeric, non-whitespace delimiter may replace the slashes. If single quotes are used, no interpretation is done on the replacement string (the /e modifier overrides this, however). If backquotes are used, the replacement string is a command to execute whose output will be used as the actual replacement text. If the PATTERN is delimited by bracketing quotes, the REPLACEMENT has its own pair of quotes, which may or may not be bracketing quotes, e.g. s(foo)(bar) or s<foo>/bar/. A /e will cause the replacement portion to be interpreter as a full-fledged Perl expression and eval() ed right then and there. It is, however, syntax checked at compile-time.

Examples:

s/\bgreen\b/mauve/g; # don't change wintergreen $path =~ s|/usr/bin|/usr/local/bin|; s/Login: $foo/Login: $bar/; # run-time pattern ($foo = $bar) =~ s/this/that/; $count = ($paragraph =~ s/Mister\b/Mr./g); $_ = 'abc123xyz'; s/\d+/$&*2/e; # yields 'abc246xyz' s/\d+/sprintf("%5d",$&)/e; # yields 'abc 246xyz' s/\w/$& x 2/eg; # yields 'aabbcc 224466xxyyzz' s/%(.)/$percent{$1}/g; # change percent escapes; no /e s/%(.)/$percent{$1} || $&/ge; # expr now, so /e s/^=(\w+)/&pod($1)/ge; # use function call # /e's can even nest; this will expand # simple embedded variables in $_ s/(\$\w+)/$1/eeg; # Delete C comments. $program =~ s { /\* # Match the opening delimiter. .*? # Match a minimal number of characters. \*/ # Match the closing delimiter. } []gsx; s/^\s*(.*?)\s*$/$1/; # trim white space s/([^ ]*) *([^ ]*)/$2 $1/; # reverse 1st two fields

Note the use of $ instead of \ in the last example. Unlike sed, we only use the \<digit> form in the left hand side. Anywhere else it's $<digit>.

Occasionally, you can't just use a /g to get all the changes to occur. Here are two common cases:

# put commas in the right places in an integer 1 while s/(.*\d)(\d\d\d)/$1,$2/g; # perl4 1 while s/(\d)(\d\d\d)(?!\d)/$1,$2/g; # perl5 # expand tabs to 8-column spacing 1 while s/\t+/' ' x (length($&)*8 - length($`)%8)/e;

tr/SEARCHLIST/REPLACEMENTLIST/cds

y/SEARCHLIST/REPLACEMENTLIST/cds
Translates all occurrences of the characters found in the search list with the corresponding character in the replacement list. It returns the number of characters replaced or deleted. If no string is specified via the =~ or !~ operator, the $_ string is translated. (The string specified with =~ must be a scalar variable, an array element, or an assignment to one of those, i.e. an lvalue.) For sed devotees, y is provided as a synonym for tr. If the SEARCHLIST is delimited by bracketing quotes, the REPLACEMENTLIST has its own pair of quotes, which may or may not be bracketing quotes, e.g. tr[A-Z][a-z] or tr(+-*/)/ABCD/.

Options:

If the /c modifier is specified, the SEARCHLIST character set is complemented. If the /d modifier is specified, any characters specified by SEARCHLIST not found in REPLACEMENTLIST are deleted. (Note that this is slightly more flexible than the behavior of some tr programs, which delete anything they find in the SEARCHLIST, period.) If the /s modifier is specified, sequences of characters that were translated to the same character are squashed down to a single instance of the character.

If the /d modifier is used, the REPLACEMENTLIST is always interpreted exactly as specified. Otherwise, if the REPLACEMENTLIST is shorter than the SEARCHLIST, the final character is replicated till it is long enough. If the REPLACEMENTLIST is null, the SEARCHLIST is replicated. This latter is useful for counting characters in a class or for squashing character sequences in a class.

Examples:

$ARGV[1] =~ tr/A-Z/a-z/; # canonicalize to lower case $cnt = tr/*/*/; # count the stars in $_ $cnt = $sky =~ tr/*/*/; # count the stars in $sky $cnt = tr/0-9//; # count the digits in $_ tr/a-zA-Z//s; # bookkeeper -> bokeper ($HOST = $host) =~ tr/a-z/A-Z/; tr/a-zA-Z/ /cs; # change non-alphas to single space tr [\200-\377] [\000-\177]; # delete 8th bit

If multiple translations are given for a character, only the first one is used:

tr/AAA/XYZ/

will translate any A to X.

Note that because the translation table is built at compile time, neither the SEARCHLIST nor the REPLACEMENTLIST are subjected to double quote interpolation. That means that if you want to use variables, you must use an eval() :

eval "tr/$oldlist/$newlist/"; die $@ if $@; eval "tr/$oldlist/$newlist/, 1" or die $@;

.

I/O Operators

There are several I/O operators you should know about. A string is enclosed by backticks (grave accents) first undergoes variable substitution just like a double quoted string. It is then interpreted as a command, and the output of that command is the value of the pseudo-literal, like in a shell. In a scalar context, a single string consisting of all the output is returned. In a list context, a list of values is returned, one for each line of output. (You can set $/ to use a different line terminator.) The command is executed each time the pseudo-literal is evaluated. The status value of the command is returned in $? (see the perlvar manpage for the interpretation of $? ). Unlike in csh, no translation is done on the return data--newlines remain newlines. Unlike in any of the shells, single quotes do not hide variable names in the command from interpretation. To pass a $ through to the shell you need to hide it with a backslash. The generalized form of backticks is qx// . (Because backticks always undergo shell expansion as well, see the perlsec manpage for security concerns.)

Evaluating a filehandle in angle brackets yields the next line from that file (newline included, so it's never false until end of file, at which time an undefined value is returned). Ordinarily you must assign that value to a variable, but there is one situation where an automatic assignment happens. If and ONLY if the input symbol is the only thing inside the conditional of a while loop, the value is automatically assigned to the variable $_ . The assigned value is then tested to see if it is defined. (This may seem like an odd thing to you, but you'll use the construct in almost every Perl script you write.) Anyway, the following lines are equivalent to each other:

while (defined($_ = <STDIN>)) { print; } while (<STDIN>) { print; } for (;<STDIN>;) { print; } print while defined($_ = <STDIN>); print while <STDIN>;

The filehandles STDIN, STDOUT and STDERR are predefined. (The filehandles stdin, stdout and stderr will also work except in packages, where they would be interpreted as local identifiers rather than global.) Additional filehandles may be created with the open() function. See open for details on this.

If a <FILEHANDLE> is used in a context that is looking for a list, a list consisting of all the input lines is returned, one line per list element. It's easy to make a LARGE data space this way, so use with care.

The null filehandle <> is special and can be used to emulate the behavior of sed and awk. Input from <> comes either from standard input, or from each file listed on the command line. Here's how it works: the first time <> is evaluated, the @ARGV array is checked, and if it is null, $ARGV [0] is set to ``-'', which when opened gives you standard input. The @ARGV array is then processed as a list of filenames. The loop

while (<>) { ... # code for each line }

is equivalent to the following Perl-like pseudo code:

unshift(@ARGV, '-') if $#ARGV < $[; while ($ARGV = shift) { open(ARGV, $ARGV); while (<ARGV>) { ... # code for each line } }

except that it isn't so cumbersome to say, and will actually work. It really does shift array @ARGV and put the current filename into variable $ARGV . It also uses filehandle ARGV internally--<> is just a synonym for <ARGV>, which is magical. (The pseudo code above doesn't work because it treats <ARGV> as non-magical.)

You can modify @ARGV before the first <> as long as the array ends up containing the list of filenames you really want. Line numbers ( $. ) continue as if the input were one big happy file. (But see example under eof() for how to reset line numbers on each file.)

If you want to set @ARGV to your own list of files, go right ahead. If you want to pass switches into your script, you can use one of the Getopts modules or put a loop on the front like this:

while ($_ = $ARGV[0], /^-/) { shift; last if /^--$/; if (/^-D(.*)/) { $debug = $1 } if (/^-v/) { $verbose++ } ... # other switches } while (<>) { ... # code for each line }

The <> symbol will return FALSE only once. If you call it again after this it will assume you are processing another @ARGV list, and if you haven't set @ARGV , will input from STDIN.

If the string inside the angle brackets is a reference to a scalar variable (e.g. <$foo>), then that variable contains the name of the filehandle to input from, or a reference to the same. For example:

$fh = \*STDIN; $line = <$fh>;

If the string inside angle brackets is not a filehandle or a scalar variable containing a filehandle name or reference, then it is interpreted as a filename pattern to be globbed, and either a list of filenames or the next filename in the list is returned, depending on context. One level of $ interpretation is done first, but you can't say <$foo> because that's an indirect filehandle as explained in the previous paragraph. In older version of Perl, programmers would insert curly brackets to force interpretation as a filename glob: <${foo}>. These days, it's consdired cleaner to call the internal function directly as glob($foo) , which is probably the right way to have done it in the first place.) Example:

while (<*.c>) { chmod 0644, $_; }

is equivalent to

open(FOO, "echo *.c | tr -s ' \t\r\f' '\\012\\012\\012\\012'|"); while (<FOO>) { chop; chmod 0644, $_; }

In fact, it's currently implemented that way. (Which means it will not work on filenames with spaces in them unless you have csh(1) on your machine.) Of course, the shortest way to do the above is:

chmod 0644, <*.c>;

Because globbing invokes a shell, it's often faster to call readdir() yourself and just do your own grep() on the filenames. Furthermore, due to its current implementation of using a shell, the glob() routine may get "Arg list too long" errors (unless you've installed tcsh(1L) as /bin/csh).

A glob only evaluates its (embedded) argument when it is starting a new list. All values must be read before it will start over. In a list context this isn't important, because you automatically get them all anyway. In a scalar context, however, the operator returns the next value each time it is called, or a FALSE value if you've just run out. Again, FALSE is returned only once. So if you're expecting a single value from a glob, it is much better to say

($file) = <blurch*>;

than

$file = <blurch*>;

because the latter will alternate between returning a filename and returning FALSE.

It you're trying to do variable interpolation, it's definitely better to use the glob() function, because the older notation can cause people to become confused with the indirect filehandle notatin.

@files = glob("$dir/*.[ch]"); @files = glob($files[$i]);

Constant Folding

Like C, Perl does a certain amount of expression evaluation at compile time, whenever it determines that all of the arguments to an operator are static and have no side effects. In particular, string concatenation happens at compile time between literals that don't do variable substitution. Backslash interpretation also happens at compile time. You can say

'Now is the time for all' . "\n" . 'good men to come to.'

and this all reduces to one string internally. Likewise, if you say

foreach $file (@filenames) { if (-s $file > 5 + 100 * 2**16) { ... } }

the compiler will pre-compute the number that expression represents so that the interpreter won't have to.

Integer arithmetic

By default Perl assumes that it must do most of its arithmetic in floating point. But by saying

use integer;

you may tell the compiler that it's okay to use integer operations from here to the end of the enclosing BLOCK. An inner BLOCK may countermand this by saying

no integer;

which lasts until the end of that BLOCK.