Struct std::num::Wrapping

pub struct Wrapping<T>(pub T);

Provides intentionally-wrapped arithmetic on T.

Operations like + on u32 values is intended to never overflow, and in some debug configurations overflow is detected and results in a panic. While most arithmetic falls into this category, some code explicitly expects and relies upon modular arithmetic (e.g., hashing).

Wrapping arithmetic can be achieved either through methods like wrapping_add, or through the Wrapping<T> type, which says that all standard arithmetic operations on the underlying value are intended to have wrapping semantics.

Examples

use std::num::Wrapping;

let zero = Wrapping(0u32);
let one = Wrapping(1u32);

assert_eq!(std::u32::MAX, (zero - one).0);

Trait Implementations

impl<T> Binary for Wrapping<T> where
    T: Binary, 

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl<'a> Sub<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: Wrapping<i64>
) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: Wrapping<u16>
) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: Wrapping<u128>
) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i8>) -> <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: Wrapping<u64>
) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

Performs the - operation.

impl Sub<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

Performs the - operation.

impl Sub<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: Wrapping<u32>
) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

Performs the - operation.

impl Sub<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the - operation.

impl Sub<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the - operation.

impl Sub<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: Wrapping<usize>
) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: Wrapping<i16>
) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

Performs the - operation.

impl Sub<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the - operation.

impl Sub<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

Performs the - operation.

impl Sub<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u8>) -> <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: Wrapping<i32>
) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: Wrapping<i128>
) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

Performs the - operation.

impl Sub<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the - operation.

impl<'a> Sub<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: Wrapping<isize>
) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

Performs the - operation.

impl Sub<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

Performs the - operation.

impl Sub<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the - operation.

impl Sub<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

The resulting type after applying the - operator.

fn sub(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

Performs the - operation.

impl<T> Debug for Wrapping<T> where
    T: Debug, 

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Shr<usize> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i64>

Performs the >> operation.

impl Shr<usize> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i8>

Performs the >> operation.

impl Shr<usize> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u8>

Performs the >> operation.

impl Shr<usize> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i16>

Performs the >> operation.

impl Shr<usize> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u64>

Performs the >> operation.

impl Shr<usize> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<isize>

Performs the >> operation.

impl Shr<usize> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<usize>

Performs the >> operation.

impl Shr<usize> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i32>

Performs the >> operation.

impl Shr<usize> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u32>

Performs the >> operation.

impl Shr<usize> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u16>

Performs the >> operation.

impl<'a, 'b> BitXor<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the ^ operation.

impl BitXor<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the ^ operation.

impl BitXor<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the ^ operation.

impl BitXor<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the ^ operation.

impl BitXor<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<i128>
) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<isize>
) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<u16>
) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<usize>
) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the ^ operation.

impl BitXor<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the ^ operation.

impl BitXor<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<u64>
) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<i64>
) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<i8>
) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<i32>
) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<i16>
) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<u8>
) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<u128>
) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(
    self,
    other: Wrapping<u32>
) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

Performs the ^ operation.

impl<'a> Not for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u64> as Not>::Output

Performs the unary ! operation.

impl Not for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u32>

Performs the unary ! operation.

impl Not for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i16>

Performs the unary ! operation.

impl Not for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u8>

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i32> as Not>::Output

Performs the unary ! operation.

impl Not for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u128>

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i8> as Not>::Output

Performs the unary ! operation.

impl Not for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i8>

Performs the unary ! operation.

impl Not for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u64>

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i128> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u32> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u8> as Not>::Output

Performs the unary ! operation.

impl Not for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<usize>

Performs the unary ! operation.

impl Not for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i128>

Performs the unary ! operation.

impl Not for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<isize>

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<usize> as Not>::Output

Performs the unary ! operation.

impl Not for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u16>

Performs the unary ! operation.

impl Not for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i32>

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u128> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i64> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<isize> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u16> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i16> as Not>::Output

Performs the unary ! operation.

impl Not for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i64>

Performs the unary ! operation.

impl Rem<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: Wrapping<u32>
) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

Performs the % operation.

impl Rem<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: Wrapping<u64>
) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

Performs the % operation.

impl Rem<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the % operation.

impl<'a> Rem<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i8>) -> <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

Performs the % operation.

impl Rem<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the % operation.

impl Rem<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the % operation.

impl Rem<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the % operation.

impl Rem<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the % operation.

impl<'a> Rem<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: Wrapping<u16>
) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: Wrapping<i128>
) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: Wrapping<usize>
) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: Wrapping<u128>
) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

Performs the % operation.

impl Rem<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u8>) -> <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: Wrapping<isize>
) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

Performs the % operation.

impl Rem<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the % operation.

impl Rem<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: Wrapping<i32>
) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

Performs the % operation.

impl Rem<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the % operation.

impl Rem<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: Wrapping<i64>
) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: Wrapping<i16>
) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

The resulting type after applying the % operator.

fn rem(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

Performs the % operation.

impl<T> UpperHex for Wrapping<T> where
    T: UpperHex, 

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl<'a> Product<&'a Wrapping<i128>> for Wrapping<i128>

fn product<I>(iter: I) -> Wrapping<i128> where
    I: Iterator<Item = &'a Wrapping<i128>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i32>> for Wrapping<i32>

fn product<I>(iter: I) -> Wrapping<i32> where
    I: Iterator<Item = &'a Wrapping<i32>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i8>> for Wrapping<i8>

fn product<I>(iter: I) -> Wrapping<i8> where
    I: Iterator<Item = &'a Wrapping<i8>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u64>> for Wrapping<u64>

fn product<I>(iter: I) -> Wrapping<u64> where
    I: Iterator<Item = &'a Wrapping<u64>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u8>> for Wrapping<u8>

fn product<I>(iter: I) -> Wrapping<u8> where
    I: Iterator<Item = &'a Wrapping<u8>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<i32>> for Wrapping<i32>

fn product<I>(iter: I) -> Wrapping<i32> where
    I: Iterator<Item = Wrapping<i32>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u128>> for Wrapping<u128>

fn product<I>(iter: I) -> Wrapping<u128> where
    I: Iterator<Item = &'a Wrapping<u128>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<i64>> for Wrapping<i64>

fn product<I>(iter: I) -> Wrapping<i64> where
    I: Iterator<Item = Wrapping<i64>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<u32>> for Wrapping<u32>

fn product<I>(iter: I) -> Wrapping<u32> where
    I: Iterator<Item = Wrapping<u32>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<i8>> for Wrapping<i8>

fn product<I>(iter: I) -> Wrapping<i8> where
    I: Iterator<Item = Wrapping<i8>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i16>> for Wrapping<i16>

fn product<I>(iter: I) -> Wrapping<i16> where
    I: Iterator<Item = &'a Wrapping<i16>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<u16>> for Wrapping<u16>

fn product<I>(iter: I) -> Wrapping<u16> where
    I: Iterator<Item = Wrapping<u16>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<i128>> for Wrapping<i128>

fn product<I>(iter: I) -> Wrapping<i128> where
    I: Iterator<Item = Wrapping<i128>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<u8>> for Wrapping<u8>

fn product<I>(iter: I) -> Wrapping<u8> where
    I: Iterator<Item = Wrapping<u8>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<i16>> for Wrapping<i16>

fn product<I>(iter: I) -> Wrapping<i16> where
    I: Iterator<Item = Wrapping<i16>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i64>> for Wrapping<i64>

fn product<I>(iter: I) -> Wrapping<i64> where
    I: Iterator<Item = &'a Wrapping<i64>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<usize>> for Wrapping<usize>

fn product<I>(iter: I) -> Wrapping<usize> where
    I: Iterator<Item = Wrapping<usize>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<isize>> for Wrapping<isize>

fn product<I>(iter: I) -> Wrapping<isize> where
    I: Iterator<Item = Wrapping<isize>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<usize>> for Wrapping<usize>

fn product<I>(iter: I) -> Wrapping<usize> where
    I: Iterator<Item = &'a Wrapping<usize>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<u64>> for Wrapping<u64>

fn product<I>(iter: I) -> Wrapping<u64> where
    I: Iterator<Item = Wrapping<u64>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<isize>> for Wrapping<isize>

fn product<I>(iter: I) -> Wrapping<isize> where
    I: Iterator<Item = &'a Wrapping<isize>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u16>> for Wrapping<u16>

fn product<I>(iter: I) -> Wrapping<u16> where
    I: Iterator<Item = &'a Wrapping<u16>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u32>> for Wrapping<u32>

fn product<I>(iter: I) -> Wrapping<u32> where
    I: Iterator<Item = &'a Wrapping<u32>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<u128>> for Wrapping<u128>

fn product<I>(iter: I) -> Wrapping<u128> where
    I: Iterator<Item = Wrapping<u128>>, 

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a, 'b> Mul<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: Wrapping<i32>
) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

Performs the * operation.

impl Mul<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: Wrapping<u32>
) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

Performs the * operation.

impl Mul<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the * operation.

impl<'a> Mul<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: Wrapping<u128>
) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

Performs the * operation.

impl Mul<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the * operation.

impl<'a> Mul<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: Wrapping<usize>
) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u8>) -> <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: Wrapping<i64>
) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

Performs the * operation.

impl Mul<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the * operation.

impl<'a> Mul<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: Wrapping<i16>
) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

Performs the * operation.

impl Mul<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the * operation.

impl Mul<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

Performs the * operation.

impl Mul<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i8>) -> <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: Wrapping<isize>
) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

Performs the * operation.

impl Mul<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the * operation.

impl<'a> Mul<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: Wrapping<u64>
) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

Performs the * operation.

impl Mul<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the * operation.

impl Mul<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the * operation.

impl Mul<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the * operation.

impl<'a> Mul<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: Wrapping<i128>
) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: Wrapping<u16>
) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

Performs the * operation.

impl Mul<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

The resulting type after applying the * operator.

fn mul(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

Performs the * operation.

impl<T> Octal for Wrapping<T> where
    T: Octal, 

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Shl<usize> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<usize>

Performs the << operation.

impl Shl<usize> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u16>

Performs the << operation.

impl Shl<usize> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i16>

Performs the << operation.

impl Shl<usize> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u8>

Performs the << operation.

impl Shl<usize> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<isize>

Performs the << operation.

impl Shl<usize> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u32>

Performs the << operation.

impl Shl<usize> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i32>

Performs the << operation.

impl Shl<usize> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i8>

Performs the << operation.

impl Shl<usize> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u64>

Performs the << operation.

impl Shl<usize> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i64>

Performs the << operation.

impl<'a> BitAnd<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<u128>
) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the & operation.

impl<'a> BitAnd<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<u16>
) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<i8>
) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<usize>
) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the & operation.

impl BitAnd<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the & operation.

impl BitAnd<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<i64>
) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the & operation.

impl BitAnd<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<i32>
) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<i128>
) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<u32>
) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<isize>
) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<i16>
) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<u8>
) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: Wrapping<u64>
) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

The resulting type after applying the & operator.

fn bitand(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

Performs the & operation.

impl<T> Hash for Wrapping<T> where
    T: Hash, 

fn hash<__HT>(&self, __arg_0: &mut __HT) where
    __HT: Hasher, 

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl<T> Default for Wrapping<T> where
    T: Default, 

fn default() -> Wrapping<T>

Returns the "default value" for a type.

impl<T> Clone for Wrapping<T> where
    T: Clone, 

fn clone(&self) -> Wrapping<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> PartialOrd<Wrapping<T>> for Wrapping<T> where
    T: PartialOrd<T>, 

fn partial_cmp(&self, __arg_0: &Wrapping<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, __arg_0: &Wrapping<T>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, __arg_0: &Wrapping<T>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, __arg_0: &Wrapping<T>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, __arg_0: &Wrapping<T>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T> Ord for Wrapping<T> where
    T: Ord, 

fn cmp(&self, __arg_0: &Wrapping<T>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

impl ShlAssign<usize> for Wrapping<i16>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u8>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u64>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i32>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u32>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i64>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i16>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i64>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<isize>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i8>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u64>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u8>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i32>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<usize>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<isize>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<usize>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u16>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i8>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u16>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u32>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl<'a> Div<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Div<Wrapping<i32>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: Wrapping<i32>
) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Div<Wrapping<i128>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Div<Wrapping<u64>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Div<Wrapping<usize>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: Wrapping<usize>
) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as Div<Wrapping<u128>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output

Performs the / operation.

impl Div<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the / operation.

impl<'a> Div<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Div<Wrapping<u8>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as Div<Wrapping<u8>>>::Output

Performs the / operation.

impl Div<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the / operation.

impl<'a> Div<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Div<Wrapping<i32>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Div<Wrapping<isize>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: Wrapping<isize>
) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Div<Wrapping<usize>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output

Performs the / operation.

impl Div<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the / operation.

impl<'a> Div<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Div<Wrapping<i16>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as Div<Wrapping<u32>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Div<Wrapping<u8>>>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u8>) -> <Wrapping<u8> as Div<Wrapping<u8>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as Div<Wrapping<i8>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as Div<Wrapping<i8>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Div<Wrapping<i128>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: Wrapping<i128>
) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Div<Wrapping<i64>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: Wrapping<i64>
) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as Div<Wrapping<isize>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output

Performs the / operation.

impl Div<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as Div<Wrapping<i64>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Div<Wrapping<u64>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: Wrapping<u64>
) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Div<Wrapping<u16>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Div<Wrapping<i16>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: Wrapping<i16>
) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as Div<Wrapping<u64>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output

Performs the / operation.

impl Div<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the / operation.

impl Div<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as Div<Wrapping<usize>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output

Performs the / operation.

impl Div<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the / operation.

impl<'a> Div<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Div<Wrapping<isize>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as Div<Wrapping<u8>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as Div<Wrapping<u8>>>::Output

Performs the / operation.

impl Div<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as Div<Wrapping<i32>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Div<Wrapping<u128>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Div<Wrapping<i64>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output

Performs the / operation.

impl Div<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the / operation.

impl<'a> Div<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Div<Wrapping<u32>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Div<Wrapping<u32>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: Wrapping<u32>
) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Div<Wrapping<i8>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as Div<Wrapping<i8>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as Div<Wrapping<i16>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Div<Wrapping<u128>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: Wrapping<u128>
) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Div<Wrapping<u16>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: Wrapping<u16>
) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as Div<Wrapping<i128>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output

Performs the / operation.

impl Div<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the / operation.

impl<'a> Div<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Div<Wrapping<i8>>>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i8>) -> <Wrapping<i8> as Div<Wrapping<i8>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as Div<Wrapping<u16>>>::Output

The resulting type after applying the / operator.

fn div(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output

Performs the / operation.

impl Div<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the / operation.

impl Div<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the / operation.

impl<'a> BitXorAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn bitxor_assign(&mut self, other: &'a Wrapping<u64>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<u16>> for Wrapping<u16>

fn bitxor_assign(&mut self, other: Wrapping<u16>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<i128>> for Wrapping<i128>

fn bitxor_assign(&mut self, other: Wrapping<i128>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<u8>> for Wrapping<u8>

fn bitxor_assign(&mut self, other: Wrapping<u8>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn bitxor_assign(&mut self, other: &'a Wrapping<i64>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<usize>> for Wrapping<usize>

fn bitxor_assign(&mut self, other: Wrapping<usize>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn bitxor_assign(&mut self, other: &'a Wrapping<u128>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn bitxor_assign(&mut self, other: &'a Wrapping<isize>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn bitxor_assign(&mut self, other: &'a Wrapping<u16>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn bitxor_assign(&mut self, other: &'a Wrapping<u8>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn bitxor_assign(&mut self, other: &'a Wrapping<i16>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<i64>> for Wrapping<i64>

fn bitxor_assign(&mut self, other: Wrapping<i64>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn bitxor_assign(&mut self, other: &'a Wrapping<i8>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<i32>> for Wrapping<i32>

fn bitxor_assign(&mut self, other: Wrapping<i32>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn bitxor_assign(&mut self, other: &'a Wrapping<i32>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn bitxor_assign(&mut self, other: &'a Wrapping<i128>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<u32>> for Wrapping<u32>

fn bitxor_assign(&mut self, other: Wrapping<u32>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn bitxor_assign(&mut self, other: &'a Wrapping<usize>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<u128>> for Wrapping<u128>

fn bitxor_assign(&mut self, other: Wrapping<u128>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<u64>> for Wrapping<u64>

fn bitxor_assign(&mut self, other: Wrapping<u64>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<i16>> for Wrapping<i16>

fn bitxor_assign(&mut self, other: Wrapping<i16>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn bitxor_assign(&mut self, other: &'a Wrapping<u32>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<isize>> for Wrapping<isize>

fn bitxor_assign(&mut self, other: Wrapping<isize>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<i8>> for Wrapping<i8>

fn bitxor_assign(&mut self, other: Wrapping<i8>)

Performs the ^= operation.

impl Sum<Wrapping<u16>> for Wrapping<u16>

fn sum<I>(iter: I) -> Wrapping<u16> where
    I: Iterator<Item = Wrapping<u16>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<usize>> for Wrapping<usize>

fn sum<I>(iter: I) -> Wrapping<usize> where
    I: Iterator<Item = &'a Wrapping<usize>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<i32>> for Wrapping<i32>

fn sum<I>(iter: I) -> Wrapping<i32> where
    I: Iterator<Item = Wrapping<i32>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<u32>> for Wrapping<u32>

fn sum<I>(iter: I) -> Wrapping<u32> where
    I: Iterator<Item = Wrapping<u32>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<i64>> for Wrapping<i64>

fn sum<I>(iter: I) -> Wrapping<i64> where
    I: Iterator<Item = Wrapping<i64>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<i8>> for Wrapping<i8>

fn sum<I>(iter: I) -> Wrapping<i8> where
    I: Iterator<Item = Wrapping<i8>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<isize>> for Wrapping<isize>

fn sum<I>(iter: I) -> Wrapping<isize> where
    I: Iterator<Item = &'a Wrapping<isize>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<i16>> for Wrapping<i16>

fn sum<I>(iter: I) -> Wrapping<i16> where
    I: Iterator<Item = Wrapping<i16>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<u8>> for Wrapping<u8>

fn sum<I>(iter: I) -> Wrapping<u8> where
    I: Iterator<Item = Wrapping<u8>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<u32>> for Wrapping<u32>

fn sum<I>(iter: I) -> Wrapping<u32> where
    I: Iterator<Item = &'a Wrapping<u32>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<u8>> for Wrapping<u8>

fn sum<I>(iter: I) -> Wrapping<u8> where
    I: Iterator<Item = &'a Wrapping<u8>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<u64>> for Wrapping<u64>

fn sum<I>(iter: I) -> Wrapping<u64> where
    I: Iterator<Item = &'a Wrapping<u64>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<isize>> for Wrapping<isize>

fn sum<I>(iter: I) -> Wrapping<isize> where
    I: Iterator<Item = Wrapping<isize>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<u128>> for Wrapping<u128>

fn sum<I>(iter: I) -> Wrapping<u128> where
    I: Iterator<Item = Wrapping<u128>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<usize>> for Wrapping<usize>

fn sum<I>(iter: I) -> Wrapping<usize> where
    I: Iterator<Item = Wrapping<usize>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<i128>> for Wrapping<i128>

fn sum<I>(iter: I) -> Wrapping<i128> where
    I: Iterator<Item = Wrapping<i128>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<i64>> for Wrapping<i64>

fn sum<I>(iter: I) -> Wrapping<i64> where
    I: Iterator<Item = &'a Wrapping<i64>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<i16>> for Wrapping<i16>

fn sum<I>(iter: I) -> Wrapping<i16> where
    I: Iterator<Item = &'a Wrapping<i16>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<i128>> for Wrapping<i128>

fn sum<I>(iter: I) -> Wrapping<i128> where
    I: Iterator<Item = &'a Wrapping<i128>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<u64>> for Wrapping<u64>

fn sum<I>(iter: I) -> Wrapping<u64> where
    I: Iterator<Item = Wrapping<u64>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<i32>> for Wrapping<i32>

fn sum<I>(iter: I) -> Wrapping<i32> where
    I: Iterator<Item = &'a Wrapping<i32>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<u128>> for Wrapping<u128>

fn sum<I>(iter: I) -> Wrapping<u128> where
    I: Iterator<Item = &'a Wrapping<u128>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<i8>> for Wrapping<i8>

fn sum<I>(iter: I) -> Wrapping<i8> where
    I: Iterator<Item = &'a Wrapping<i8>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<u16>> for Wrapping<u16>

fn sum<I>(iter: I) -> Wrapping<u16> where
    I: Iterator<Item = &'a Wrapping<u16>>, 

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl BitOrAssign<Wrapping<i16>> for Wrapping<i16>

fn bitor_assign(&mut self, other: Wrapping<i16>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn bitor_assign(&mut self, other: &'a Wrapping<isize>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn bitor_assign(&mut self, other: &'a Wrapping<i8>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn bitor_assign(&mut self, other: &'a Wrapping<i16>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn bitor_assign(&mut self, other: &'a Wrapping<u64>)

Performs the |= operation.

impl BitOrAssign<Wrapping<usize>> for Wrapping<usize>

fn bitor_assign(&mut self, other: Wrapping<usize>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn bitor_assign(&mut self, other: &'a Wrapping<u128>)

Performs the |= operation.

impl BitOrAssign<Wrapping<u8>> for Wrapping<u8>

fn bitor_assign(&mut self, other: Wrapping<u8>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn bitor_assign(&mut self, other: &'a Wrapping<i64>)

Performs the |= operation.

impl BitOrAssign<Wrapping<isize>> for Wrapping<isize>

fn bitor_assign(&mut self, other: Wrapping<isize>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn bitor_assign(&mut self, other: &'a Wrapping<u8>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn bitor_assign(&mut self, other: &'a Wrapping<u16>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn bitor_assign(&mut self, other: &'a Wrapping<u32>)

Performs the |= operation.

impl BitOrAssign<Wrapping<u64>> for Wrapping<u64>

fn bitor_assign(&mut self, other: Wrapping<u64>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn bitor_assign(&mut self, other: &'a Wrapping<i32>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn bitor_assign(&mut self, other: &'a Wrapping<i128>)

Performs the |= operation.

impl BitOrAssign<Wrapping<i8>> for Wrapping<i8>

fn bitor_assign(&mut self, other: Wrapping<i8>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn bitor_assign(&mut self, other: &'a Wrapping<usize>)

Performs the |= operation.

impl BitOrAssign<Wrapping<u16>> for Wrapping<u16>

fn bitor_assign(&mut self, other: Wrapping<u16>)

Performs the |= operation.

impl BitOrAssign<Wrapping<i128>> for Wrapping<i128>

fn bitor_assign(&mut self, other: Wrapping<i128>)

Performs the |= operation.

impl BitOrAssign<Wrapping<i64>> for Wrapping<i64>

fn bitor_assign(&mut self, other: Wrapping<i64>)

Performs the |= operation.

impl BitOrAssign<Wrapping<i32>> for Wrapping<i32>

fn bitor_assign(&mut self, other: Wrapping<i32>)

Performs the |= operation.

impl BitOrAssign<Wrapping<u128>> for Wrapping<u128>

fn bitor_assign(&mut self, other: Wrapping<u128>)

Performs the |= operation.

impl BitOrAssign<Wrapping<u32>> for Wrapping<u32>

fn bitor_assign(&mut self, other: Wrapping<u32>)

Performs the |= operation.

impl<T> LowerHex for Wrapping<T> where
    T: LowerHex, 

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl BitAndAssign<Wrapping<i32>> for Wrapping<i32>

fn bitand_assign(&mut self, other: Wrapping<i32>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn bitand_assign(&mut self, other: &'a Wrapping<i128>)

Performs the &= operation.

impl BitAndAssign<Wrapping<i8>> for Wrapping<i8>

fn bitand_assign(&mut self, other: Wrapping<i8>)

Performs the &= operation.

impl BitAndAssign<Wrapping<u8>> for Wrapping<u8>

fn bitand_assign(&mut self, other: Wrapping<u8>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn bitand_assign(&mut self, other: &'a Wrapping<u64>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn bitand_assign(&mut self, other: &'a Wrapping<isize>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn bitand_assign(&mut self, other: &'a Wrapping<usize>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn bitand_assign(&mut self, other: &'a Wrapping<u128>)

Performs the &= operation.

impl BitAndAssign<Wrapping<i16>> for Wrapping<i16>

fn bitand_assign(&mut self, other: Wrapping<i16>)

Performs the &= operation.

impl BitAndAssign<Wrapping<usize>> for Wrapping<usize>

fn bitand_assign(&mut self, other: Wrapping<usize>)

Performs the &= operation.

impl BitAndAssign<Wrapping<i128>> for Wrapping<i128>

fn bitand_assign(&mut self, other: Wrapping<i128>)

Performs the &= operation.

impl BitAndAssign<Wrapping<u64>> for Wrapping<u64>

fn bitand_assign(&mut self, other: Wrapping<u64>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn bitand_assign(&mut self, other: &'a Wrapping<i64>)

Performs the &= operation.

impl BitAndAssign<Wrapping<u128>> for Wrapping<u128>

fn bitand_assign(&mut self, other: Wrapping<u128>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn bitand_assign(&mut self, other: &'a Wrapping<i32>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn bitand_assign(&mut self, other: &'a Wrapping<u8>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn bitand_assign(&mut self, other: &'a Wrapping<u32>)

Performs the &= operation.

impl BitAndAssign<Wrapping<i64>> for Wrapping<i64>

fn bitand_assign(&mut self, other: Wrapping<i64>)

Performs the &= operation.

impl BitAndAssign<Wrapping<u32>> for Wrapping<u32>

fn bitand_assign(&mut self, other: Wrapping<u32>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn bitand_assign(&mut self, other: &'a Wrapping<i8>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn bitand_assign(&mut self, other: &'a Wrapping<i16>)

Performs the &= operation.

impl BitAndAssign<Wrapping<u16>> for Wrapping<u16>

fn bitand_assign(&mut self, other: Wrapping<u16>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn bitand_assign(&mut self, other: &'a Wrapping<u16>)

Performs the &= operation.

impl BitAndAssign<Wrapping<isize>> for Wrapping<isize>

fn bitand_assign(&mut self, other: Wrapping<isize>)

Performs the &= operation.

impl<T> Display for Wrapping<T> where
    T: Display, 

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Eq for Wrapping<T> where
    T: Eq, 

impl<T> PartialEq<Wrapping<T>> for Wrapping<T> where
    T: PartialEq<T>, 

fn eq(&self, __arg_0: &Wrapping<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, __arg_0: &Wrapping<T>) -> bool

This method tests for !=.

impl Add<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the + operation.

impl<'a> Add<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Add<Wrapping<u16>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: Wrapping<u16>
) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as Add<Wrapping<u16>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Add<Wrapping<i16>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as Add<Wrapping<i64>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as Add<Wrapping<i16>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Add<Wrapping<u16>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output

Performs the + operation.

impl Add<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the + operation.

impl<'a> Add<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Add<Wrapping<u8>>>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u8>) -> <Wrapping<u8> as Add<Wrapping<u8>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Add<Wrapping<i128>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Add<Wrapping<i8>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as Add<Wrapping<i8>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as Add<Wrapping<u64>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as Add<Wrapping<u8>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as Add<Wrapping<u8>>>::Output

Performs the + operation.

impl Add<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the + operation.

impl<'a> Add<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Add<Wrapping<i32>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Add<Wrapping<isize>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Add<Wrapping<i128>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: Wrapping<i128>
) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as Add<Wrapping<usize>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output

Performs the + operation.

impl Add<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the + operation.

impl<'a> Add<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Add<Wrapping<u64>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: Wrapping<u64>
) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Add<Wrapping<i64>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as Add<Wrapping<i128>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output

Performs the + operation.

impl Add<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the + operation.

impl<'a> Add<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Add<Wrapping<i16>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: Wrapping<i16>
) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output

Performs the + operation.

impl Add<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the + operation.

impl Add<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the + operation.

impl<'a> Add<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Add<Wrapping<i64>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: Wrapping<i64>
) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Add<Wrapping<u128>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: Wrapping<u128>
) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Add<Wrapping<i32>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: Wrapping<i32>
) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Add<Wrapping<usize>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as Add<Wrapping<isize>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output

Performs the + operation.

impl Add<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the + operation.

impl<'a> Add<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Add<Wrapping<u64>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output

Performs the + operation.

impl Add<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the + operation.

impl<'a> Add<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Add<Wrapping<usize>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: Wrapping<usize>
) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Add<Wrapping<u128>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as Add<Wrapping<u128>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output

Performs the + operation.

impl Add<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as Add<Wrapping<u32>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output

Performs the + operation.

impl Add<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as Add<Wrapping<i32>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Add<Wrapping<u32>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: Wrapping<u32>
) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Add<Wrapping<u32>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as Add<Wrapping<i8>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as Add<Wrapping<i8>>>::Output

Performs the + operation.

impl Add<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the + operation.

impl<'a> Add<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Add<Wrapping<u8>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as Add<Wrapping<u8>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Add<Wrapping<i8>>>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i8>) -> <Wrapping<i8> as Add<Wrapping<i8>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Add<Wrapping<isize>>>::Output

The resulting type after applying the + operator.

fn add(
    self,
    other: Wrapping<isize>
) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output

Performs the + operation.

impl<'a> BitOr<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

Performs the | operation.

impl BitOr<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

Performs the | operation.

impl BitOr<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

Performs the | operation.

impl BitOr<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

Performs the | operation.

impl BitOr<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the | operation.

impl<'a> BitOr<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<u64>
) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<i8>
) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

Performs the | operation.

impl BitOr<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the | operation.

impl BitOr<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<u16>
) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

Performs the | operation.

impl BitOr<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the | operation.

impl BitOr<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the | operation.

impl BitOr<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<usize>
) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

Performs the | operation.

impl BitOr<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<i16>
) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<u8>
) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<isize>
) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<usize>
) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

Performs the | operation.

impl BitOr<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the | operation.

impl<'a> BitOr<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<i128>
) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<u128>
) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<u128>
) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<u8>
) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<i32>
) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

Performs the | operation.

impl BitOr<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<i32>
) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<u32>
) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<i8>
) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<i64>
) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<i64>
) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<i16>
) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<i128>
) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<isize>
) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<u16>
) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: Wrapping<u32>
) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

The resulting type after applying the | operator.

fn bitor(
    self,
    other: &'a Wrapping<u64>
) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

Performs the | operation.

impl<T> Copy for Wrapping<T> where
    T: Copy, 

impl<'a> RemAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn rem_assign(&mut self, other: &'a Wrapping<u32>)

Performs the %= operation.

impl RemAssign<Wrapping<i32>> for Wrapping<i32>

fn rem_assign(&mut self, other: Wrapping<i32>)

Performs the %= operation.

impl RemAssign<Wrapping<i16>> for Wrapping<i16>

fn rem_assign(&mut self, other: Wrapping<i16>)

Performs the %= operation.

impl RemAssign<Wrapping<usize>> for Wrapping<usize>

fn rem_assign(&mut self, other: Wrapping<usize>)

Performs the %= operation.

impl RemAssign<Wrapping<u8>> for Wrapping<u8>

fn rem_assign(&mut self, other: Wrapping<u8>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn rem_assign(&mut self, other: &'a Wrapping<isize>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn rem_assign(&mut self, other: &'a Wrapping<i64>)

Performs the %= operation.

impl RemAssign<Wrapping<u16>> for Wrapping<u16>

fn rem_assign(&mut self, other: Wrapping<u16>)

Performs the %= operation.

impl RemAssign<Wrapping<u64>> for Wrapping<u64>

fn rem_assign(&mut self, other: Wrapping<u64>)

Performs the %= operation.

impl RemAssign<Wrapping<i8>> for Wrapping<i8>

fn rem_assign(&mut self, other: Wrapping<i8>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn rem_assign(&mut self, other: &'a Wrapping<i128>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn rem_assign(&mut self, other: &'a Wrapping<usize>)

Performs the %= operation.

impl RemAssign<Wrapping<i128>> for Wrapping<i128>

fn rem_assign(&mut self, other: Wrapping<i128>)

Performs the %= operation.

impl RemAssign<Wrapping<u128>> for Wrapping<u128>

fn rem_assign(&mut self, other: Wrapping<u128>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn rem_assign(&mut self, other: &'a Wrapping<u64>)

Performs the %= operation.

impl RemAssign<Wrapping<i64>> for Wrapping<i64>

fn rem_assign(&mut self, other: Wrapping<i64>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn rem_assign(&mut self, other: &'a Wrapping<u8>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn rem_assign(&mut self, other: &'a Wrapping<i16>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn rem_assign(&mut self, other: &'a Wrapping<i8>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn rem_assign(&mut self, other: &'a Wrapping<u128>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn rem_assign(&mut self, other: &'a Wrapping<i32>)

Performs the %= operation.

impl RemAssign<Wrapping<isize>> for Wrapping<isize>

fn rem_assign(&mut self, other: Wrapping<isize>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn rem_assign(&mut self, other: &'a Wrapping<u16>)

Performs the %= operation.

impl RemAssign<Wrapping<u32>> for Wrapping<u32>

fn rem_assign(&mut self, other: Wrapping<u32>)

Performs the %= operation.

impl DivAssign<Wrapping<i16>> for Wrapping<i16>

fn div_assign(&mut self, other: Wrapping<i16>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn div_assign(&mut self, other: &'a Wrapping<usize>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn div_assign(&mut self, other: &'a Wrapping<u8>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn div_assign(&mut self, other: &'a Wrapping<isize>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn div_assign(&mut self, other: &'a Wrapping<u128>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn div_assign(&mut self, other: &'a Wrapping<i16>)

Performs the /= operation.

impl DivAssign<Wrapping<i64>> for Wrapping<i64>

fn div_assign(&mut self, other: Wrapping<i64>)

Performs the /= operation.

impl DivAssign<Wrapping<i8>> for Wrapping<i8>

fn div_assign(&mut self, other: Wrapping<i8>)

Performs the /= operation.

impl DivAssign<Wrapping<u16>> for Wrapping<u16>

fn div_assign(&mut self, other: Wrapping<u16>)

Performs the /= operation.

impl DivAssign<Wrapping<u8>> for Wrapping<u8>

fn div_assign(&mut self, other: Wrapping<u8>)

Performs the /= operation.

impl DivAssign<Wrapping<u128>> for Wrapping<u128>

fn div_assign(&mut self, other: Wrapping<u128>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn div_assign(&mut self, other: &'a Wrapping<u64>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn div_assign(&mut self, other: &'a Wrapping<i64>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn div_assign(&mut self, other: &'a Wrapping<i8>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn div_assign(&mut self, other: &'a Wrapping<u32>)

Performs the /= operation.

impl DivAssign<Wrapping<i128>> for Wrapping<i128>

fn div_assign(&mut self, other: Wrapping<i128>)

Performs the /= operation.

impl DivAssign<Wrapping<usize>> for Wrapping<usize>

fn div_assign(&mut self, other: Wrapping<usize>)

Performs the /= operation.

impl DivAssign<Wrapping<i32>> for Wrapping<i32>

fn div_assign(&mut self, other: Wrapping<i32>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn div_assign(&mut self, other: &'a Wrapping<u16>)

Performs the /= operation.

impl DivAssign<Wrapping<u64>> for Wrapping<u64>

fn div_assign(&mut self, other: Wrapping<u64>)

Performs the /= operation.

impl DivAssign<Wrapping<u32>> for Wrapping<u32>

fn div_assign(&mut self, other: Wrapping<u32>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn div_assign(&mut self, other: &'a Wrapping<i128>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn div_assign(&mut self, other: &'a Wrapping<i32>)

Performs the /= operation.

impl DivAssign<Wrapping<isize>> for Wrapping<isize>

fn div_assign(&mut self, other: Wrapping<isize>)

Performs the /= operation.

impl<'a> MulAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn mul_assign(&mut self, other: &'a Wrapping<u8>)

Performs the *= operation.

impl MulAssign<Wrapping<u128>> for Wrapping<u128>

fn mul_assign(&mut self, other: Wrapping<u128>)

Performs the *= operation.

impl MulAssign<Wrapping<u8>> for Wrapping<u8>

fn mul_assign(&mut self, other: Wrapping<u8>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn mul_assign(&mut self, other: &'a Wrapping<usize>)

Performs the *= operation.

impl MulAssign<Wrapping<u16>> for Wrapping<u16>

fn mul_assign(&mut self, other: Wrapping<u16>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn mul_assign(&mut self, other: &'a Wrapping<isize>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn mul_assign(&mut self, other: &'a Wrapping<i64>)

Performs the *= operation.

impl MulAssign<Wrapping<i16>> for Wrapping<i16>

fn mul_assign(&mut self, other: Wrapping<i16>)

Performs the *= operation.

impl MulAssign<Wrapping<isize>> for Wrapping<isize>

fn mul_assign(&mut self, other: Wrapping<isize>)

Performs the *= operation.

impl MulAssign<Wrapping<i32>> for Wrapping<i32>

fn mul_assign(&mut self, other: Wrapping<i32>)

Performs the *= operation.

impl MulAssign<Wrapping<u32>> for Wrapping<u32>

fn mul_assign(&mut self, other: Wrapping<u32>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn mul_assign(&mut self, other: &'a Wrapping<u16>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn mul_assign(&mut self, other: &'a Wrapping<u128>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn mul_assign(&mut self, other: &'a Wrapping<i32>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn mul_assign(&mut self, other: &'a Wrapping<i8>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn mul_assign(&mut self, other: &'a Wrapping<i16>)

Performs the *= operation.

impl MulAssign<Wrapping<i128>> for Wrapping<i128>

fn mul_assign(&mut self, other: Wrapping<i128>)

Performs the *= operation.

impl MulAssign<Wrapping<usize>> for Wrapping<usize>

fn mul_assign(&mut self, other: Wrapping<usize>)

Performs the *= operation.

impl MulAssign<Wrapping<i8>> for Wrapping<i8>

fn mul_assign(&mut self, other: Wrapping<i8>)

Performs the *= operation.

impl MulAssign<Wrapping<u64>> for Wrapping<u64>

fn mul_assign(&mut self, other: Wrapping<u64>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn mul_assign(&mut self, other: &'a Wrapping<i128>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn mul_assign(&mut self, other: &'a Wrapping<u64>)

Performs the *= operation.

impl MulAssign<Wrapping<i64>> for Wrapping<i64>

fn mul_assign(&mut self, other: Wrapping<i64>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn mul_assign(&mut self, other: &'a Wrapping<u32>)

Performs the *= operation.

impl SubAssign<Wrapping<i16>> for Wrapping<i16>

fn sub_assign(&mut self, other: Wrapping<i16>)

Performs the -= operation.

impl SubAssign<Wrapping<isize>> for Wrapping<isize>

fn sub_assign(&mut self, other: Wrapping<isize>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn sub_assign(&mut self, other: &'a Wrapping<i128>)

Performs the -= operation.

impl SubAssign<Wrapping<u16>> for Wrapping<u16>

fn sub_assign(&mut self, other: Wrapping<u16>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn sub_assign(&mut self, other: &'a Wrapping<u32>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn sub_assign(&mut self, other: &'a Wrapping<isize>)

Performs the -= operation.

impl SubAssign<Wrapping<i32>> for Wrapping<i32>

fn sub_assign(&mut self, other: Wrapping<i32>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn sub_assign(&mut self, other: &'a Wrapping<usize>)

Performs the -= operation.

impl SubAssign<Wrapping<u128>> for Wrapping<u128>

fn sub_assign(&mut self, other: Wrapping<u128>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn sub_assign(&mut self, other: &'a Wrapping<i64>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn sub_assign(&mut self, other: &'a Wrapping<u16>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn sub_assign(&mut self, other: &'a Wrapping<i8>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn sub_assign(&mut self, other: &'a Wrapping<u128>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn sub_assign(&mut self, other: &'a Wrapping<u64>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn sub_assign(&mut self, other: &'a Wrapping<i16>)

Performs the -= operation.

impl SubAssign<Wrapping<i8>> for Wrapping<i8>

fn sub_assign(&mut self, other: Wrapping<i8>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn sub_assign(&mut self, other: &'a Wrapping<u8>)

Performs the -= operation.

impl SubAssign<Wrapping<u32>> for Wrapping<u32>

fn sub_assign(&mut self, other: Wrapping<u32>)

Performs the -= operation.

impl SubAssign<Wrapping<u64>> for Wrapping<u64>

fn sub_assign(&mut self, other: Wrapping<u64>)

Performs the -= operation.

impl SubAssign<Wrapping<u8>> for Wrapping<u8>

fn sub_assign(&mut self, other: Wrapping<u8>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn sub_assign(&mut self, other: &'a Wrapping<i32>)

Performs the -= operation.

impl SubAssign<Wrapping<i64>> for Wrapping<i64>

fn sub_assign(&mut self, other: Wrapping<i64>)

Performs the -= operation.

impl SubAssign<Wrapping<usize>> for Wrapping<usize>

fn sub_assign(&mut self, other: Wrapping<usize>)

Performs the -= operation.

impl SubAssign<Wrapping<i128>> for Wrapping<i128>

fn sub_assign(&mut self, other: Wrapping<i128>)

Performs the -= operation.

impl AddAssign<Wrapping<u8>> for Wrapping<u8>

fn add_assign(&mut self, other: Wrapping<u8>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn add_assign(&mut self, other: &'a Wrapping<u8>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn add_assign(&mut self, other: &'a Wrapping<usize>)

Performs the += operation.

impl AddAssign<Wrapping<i128>> for Wrapping<i128>

fn add_assign(&mut self, other: Wrapping<i128>)

Performs the += operation.

impl AddAssign<Wrapping<i32>> for Wrapping<i32>

fn add_assign(&mut self, other: Wrapping<i32>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn add_assign(&mut self, other: &'a Wrapping<u64>)

Performs the += operation.

impl AddAssign<Wrapping<i64>> for Wrapping<i64>

fn add_assign(&mut self, other: Wrapping<i64>)

Performs the += operation.

impl AddAssign<Wrapping<isize>> for Wrapping<isize>

fn add_assign(&mut self, other: Wrapping<isize>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn add_assign(&mut self, other: &'a Wrapping<i32>)

Performs the += operation.

impl AddAssign<Wrapping<u64>> for Wrapping<u64>

fn add_assign(&mut self, other: Wrapping<u64>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn add_assign(&mut self, other: &'a Wrapping<i8>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn add_assign(&mut self, other: &'a Wrapping<u128>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn add_assign(&mut self, other: &'a Wrapping<u16>)

Performs the += operation.

impl AddAssign<Wrapping<u128>> for Wrapping<u128>

fn add_assign(&mut self, other: Wrapping<u128>)

Performs the += operation.

impl AddAssign<Wrapping<u16>> for Wrapping<u16>

fn add_assign(&mut self, other: Wrapping<u16>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn add_assign(&mut self, other: &'a Wrapping<isize>)

Performs the += operation.

impl AddAssign<Wrapping<usize>> for Wrapping<usize>

fn add_assign(&mut self, other: Wrapping<usize>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn add_assign(&mut self, other: &'a Wrapping<i64>)

Performs the += operation.

impl AddAssign<Wrapping<i16>> for Wrapping<i16>

fn add_assign(&mut self, other: Wrapping<i16>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn add_assign(&mut self, other: &'a Wrapping<i128>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn add_assign(&mut self, other: &'a Wrapping<i16>)

Performs the += operation.

impl AddAssign<Wrapping<i8>> for Wrapping<i8>

fn add_assign(&mut self, other: Wrapping<i8>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn add_assign(&mut self, other: &'a Wrapping<u32>)

Performs the += operation.

impl AddAssign<Wrapping<u32>> for Wrapping<u32>

fn add_assign(&mut self, other: Wrapping<u32>)

Performs the += operation.

impl<'a> Neg for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i64> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i8> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i64>

Performs the unary - operation.

impl Neg for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<isize>

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u32> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u128> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u8> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i128> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<isize> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u8>

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<usize> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<usize>

Performs the unary - operation.

impl Neg for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u128>

Performs the unary - operation.

impl Neg for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i8>

Performs the unary - operation.

impl Neg for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i16>

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u16> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i16> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i32> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u64> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u32>

Performs the unary - operation.

impl Neg for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i32>

Performs the unary - operation.

impl Neg for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u16>

Performs the unary - operation.

impl Neg for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u64>

Performs the unary - operation.

impl Neg for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i128>

Performs the unary - operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<usize>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u8>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i64>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i32>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i16>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u16>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i32>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<usize>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<isize>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u32>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u32>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u64>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i8>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i64>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i8>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u8>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u64>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u16>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i16>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<isize>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.