HPCES programme
Vision and Mission
Members
Programme Co-Chair
Messages
Milestones
Programmes
Research
Participation
Job Placements
Admissions
Faculty and Staffs
Students
New Initiatives
Events

 
 

Tan H., Zhang Y. & Li Y., “Synthesis of La-based In-Situ Bulk Metallic Glass Matrix Composite”, Intermetallics, Vol. 10, pp. 1203-1205 (2002).

Zhang Y., Li Y., et al, “Glass Forming Ability of Pr-(Cu, Ni)-Al Alloys in Eutectic System”, Journal of Materials esearch, Vol. 18, No. 3, pp. 664-671 (2003).

Tan H., Zhang Y., Feng Y.P. & Li Y., “Synthesis of a La-based Bulk Metallic Glass Matrix Composite”, Philosophical Magazine Letters, Vol. 84, No. 1, pp. 53-61 (2004).

Zhang Y., Wang W.H., et al, “Glass Forming Properties of Zr-based Bulk Metallic Alloys”, Journal of Non-Crystalline Solids, Vol. 315, pp. 206-10 (2003).

Tan H., Zhang Y., Ma D., Feng Y.P. & Li Y., “Optimum Glass Formation at Off Eutectic Composition and its Relation to Skewed Eutectic Coupled Zone in the La Based La-Al-(Cu, Ni) Pseudo ernary System”, Acta Materialia, Vol. 51, pp. 4551-4561 (2003).

Conference Publications

  1. Zhang Y., Tan H. & Li Y., “Bulk Glass Formation of 12 mm Rod in La-Cu-Ni-Al Alloys”, presented at The International Conference of RQ11, Oxford, UK, 25-30 August 2002.

  2. Tan H., Zhang Y. & Li Y., “La-Al-Cu-Ni Bulk Metallic Glass Composite”, Invited Talk at The International Conference of Bulk Metallic Glass II, Keelung, Taiwan, 22-30 March 2002.

Microelectronics Interconnection

Conference Publication
Zhang G. G. & Wong C. C., “Review of Direct Metal Bonding for Microelectronic Interconnections”, The 4th Singapore-MIT Alliance Annual Symposium, Singapore, 19-20 January 2004.


Nanostructured Alloys

Conference Publication
Lu L. & Lai M. O., “Formation of Nanostructured Magnesium Alloy via Mechanical Alloying”, The International High Performance Powder-Metallurgy Components, Invited Paper, Pub. United Engineering Foundation, Inc., Coimbra, Portugal, 28 April-3 May 2002.


Nanotechnology

Conference Publications

  1. Lei Y., Thong J. T. L., Yeong K. S., Teo L. W., Chim W. K. & Choi W. K., “ Highly Ordered Free-Standing Carbon Nanotube Arrays on Silicon”, presented at Carbon 2002, Tsinghua University, Beijing, China, 15-20 September 2002.

  2. Lei Y., Teo L. W., Yeong K. S., See Y. H., Chim W. K., Choi W. K., & Thong J. T. L., “Fabrication of Highly Ordered Nanoparticle Arrays using Thin Porous Alumina Masks”, The 3rd Singapore-MIT Alliance Annual Symposium, Singapore, 17-18 January 2003.

Scanning Probe Microscopy

Journal Publications

  1. Chim W. K., Wong K. M., Teo Y. L., Lei Y. & Yeow Y. T., “Dopant Extraction from Scanning Capacitance Microscopy Measurements of p-n Junctions using Combined Inverse Modeling and Forward Simulation”, Applied Physics Letters, Vol. 80, No. 25, pp. 4837-4839 (2002).

  2. Oon C. H., Thong J. T. L., Lei Y. & Chim W. K., “High-Resolution Atomic Force Microscope Nanotip Grown by Self-Field Emission”, Applied Physics Letters, Vol. 81, No. 16, pp. 3037-3039 (2002).

  3. W.K. Chim, K.M. Wong, Y.T. Yeow, Y.D. Hong, Y. Lei, L.W. Teo and W.K. Choi, “Monitoring Oxide Quality using the Spread of the DC/DV Peak in Scanning Capacitance Microscopy Measurements”, IEEE Electron Device Letters, Vol. 24, No. 10, pp. 667-670 (2003).

TiNi Shape Memory Alloy Thin Films for MEMS Applications

Journal Publications

  1. Fu Y. Q. & Du H. J., “Magnetron Sputtered TiNiCu Shape Memory Alloy Thin Film for MEMS Applications”, Materials and Process Integration for MEMS, pp. 71-87 (2002).

  2. Fu Y. Q., Du H. J. & Zhang S., “TiNi SMA Thin Films: Relationship Among Processing, Stress Evolution and Transformation Properties”, Surface and Coatings Technology, Vol. 167, No. 2-3, pp. 120-128 (2003).

  3. Fu Y. Q. & Du H. J., “Effects of Film Composition and Annealing on Residual Stress Evolution for Shape Memory TiNi Film”, Materials Science and Engineering A, Vol. 342, Issues 1-2, pp. 237-245 (2002).

4.


5.


6.


7.


8.


9.


10.


    Fu Y. Q., Du H. J & Zhang S., “Application of TiNi Layer on TiNi Film to Improve Its Surface Properties”, Surface and Coatings Technology, Vol. 167, No. 2-3, pp. 129-136 (2003).

    Fu Y. Q., Du H. J. & Sun C. Q., “Interfacial Structure, Residual Stress and Adhesion of Diamond Coating on Titanium”, Thin Solid Films, Vol. 424, No. 1, pp. 107-114 (2003).

    Fu Y. Q., Du H. J., Gao S. & Yi S., “Mechanical Properties of TiNi Shape Memory Alloy Thin Films”, Materials Science Forum, Vol. 437, No. 4, pp. 37-40 (2003).

    Fu Y. Q., Du H. J., Huang W. & Hu M., “TiNi Film Based Shape Memory Alloy and Actuators”, International Journal of Computational Engineering Science (IJCES), Vol. 4, pp. 221-225 (2003).

    Fu Y. Q., Du H. J. & Zhang S., “Interfacial Structure and Adhesion of TiNi Films on Si/SiO2 Substrate”, Thin Solid Films, 444 (2003) 85.

    Fu Y. Q. & Du H. J., “Magnetron Sputtered TiNiPt10 Shape Memory Alloy Thin Films”, Journal of Materials Science Letters, Vol. 22, pp. 531-533 (2003).

    Du H. J. & Fu Y. Q., “Deposition and Characterization of TiNiCuX Shape Memory Alloy Thin Films”, Surface and Coatings Technology, Vol. 176, pp. 182-187 (2004).

Conference Publications

  1. Fu Y. Q. & Du H. J., “Stress Generation and Recovery During Matensite Transformation for TiNi Films”, International Conference on Martensite Transformations 02, Helsinki, Finland, 9-14 June 2002.

  2. Fu Y. Q. & Du H. J., “Magnetron Sputtered TiNiCu Shape Memory Alloy Thin Films with Different Cu Contents”, SPIE’s International Symposium on Smart Materials, Smart Materials II, SPIE, Nano- and Micro Smart Systems, pp. 219-225, Melbourne, Australia, 16-18 December 2002.

  3. Fu Y. Q. & Du H. J., “Fabrication of Micromachined TiNi-Based Microgripper with Compliant Structure”, Proceedings of the SPIE - The International Society for Optical Engineering, Vol. 5116, pp. 38-47, Smart Sensors,
    Actuators, and MEMS, Maspalomas, Gran Canaria, Spain, SPIE-Int. Soc. Opt. Eng, USA, 19-21 May 2003.

  4. Fu Y. Q., Du H. J. & Zhang S., “Some Considerations on TiNi films for MEMS Applications”, The 8th IUMRS International Conference on Advanced Materials (IUMRS-ICAM 2003), Yokohama, Japan, 8-13 October 2003.

  5. Chen J., Fu Y. Q., Du H. J. & Zhang S., “TiNi1-xCux Shape Memory Alloy Thin Films for Biopsy Application”, Proceedings of International Conference on Precision Engineering (ICoPE2003/04), pp. 579-586, Singapore, 2-5 March 2004.



Collaborative Research Projects with SMA-MIT Fellows

A Posteriori Error and Output Bounds for PDEs using Approximate Hybrid Flux

Conference Publication
Ali S., Damodaran M. & Patera A. T., “Regularization and Reduced Order Modeling for the Parametric Estimation of Systems Governed by Elliptic Partial Differential Equations”, presented at The 1st Singapore-MIT Alliance Annual Symposium, Singapore, 16-17 January 2001.

Biomolecular Suspension Flow in Microchannel using Dissipative Particle Dynamics Method

Conference Publications

  1. Chen S., Phan-Thien N., Fan X. & Khoo B. C., “Simulation of a Polymer Drop in a Shear Flow Field with DPD”, Proceedings of NanoTech 2003, Vol. 1, pp. 246-249, San Francisco, USA, 23-27 February 2003.

  2. Chen S., Phan-Thien N., Fan X. & Khoo B. C., “Simulating The Continuous Flow Separation Element for DNA Extraction using DPD”, Proceedings of IASTED International Conference on Biomedical Engineering, Austria, 25- 27 June 2003.

  3. Fan X., Phan-Thien N., Ng T. Y., Chen S. & Wu X., “DNA Molecular Suspension Flow in Microchannels”, Proceedings with MIT Conference on Simulation of Fluid and Solid Mechanics, USA, July 2003.

  4. Fan X, Phan-Thien N., Ng T. Y., Chen S. & Wu X., “Simulation Flow of DNA Suspension using DPD”, Physics of Fluids (accepted).

  5. Chen S., Phan-Thien N., Fan X. & Khoo B. C., “DPD Simulation of Polymer Drops in a Periodic Shear Flow”, Journal of Non-Newtonian Fluid Mechanics (accepted).

 
  
< back   next > 
  

4.


5.


6.


7.


8.