Felice Frankel
Jan/14 | Tue | 11:00AM-03:00PM | 4-159, Bring your laptop! |
Enrollment: Limited: Advance sign-up required
Sign-up by 01/06
Limited to 20 participants
A discussion and hands-on SHORT course on the basics of photography, photoshop, illustrator and graphical design. We will take a preliminary look at how to use these tools to visually communicate your research.
Sponsor(s): Chemical Engineering, Materials Science and Engineering, Mechanical Engineering
Contact: Felice Frankel, 13-2066, 617-324-4043, felfra@mit.edu
Donald Galler, Research Engineer
Enrollment: Advance sign up. First come, first serve basis.
Sign-up by 01/01
Limited to 8 participants
Attendance: Participants must attend all sessions
Prereq: None
The seminar is an introduction to the basic operation of a scanning electron microscope. The basic operating principles will be covered and the attendees will be trained on the use of the microscope.
This is a modern scanning electron microscope with several advanced features: low pressure chamber, computer controlled positioning stage. The SEM is equipped with an energy dispersive spectroscopy system for elemental analysis. Attendees will also be familiarized with the operation and capabilities of the EDS system. Attendees are encouraged to bring samples for exploration.
Sponsor(s): Materials Science and Engineering
Contact: Donald Galler, 4-133, 617-253-4554, dgaller@mit.edu
Jan/13 | Mon | 09:00AM-05:00PM | SEM lab room 4-141, 1 hour lunch break |
Jan/15 | Wed | 09:00AM-05:00PM | SEM lab room 4-141, 1 hour lunch break |
NA
Donald Galler - Research Engineer
Tara Fadenrecht, Technical Instructor
Enrollment: Limited: Advance sign-up required
Sign-up by 01/06
Limited to 4 participants
Attendance: Participants must attend all sessions
Prereq: None
ENROLLMENT CLOSED - CLASS FULL
Enameling is the process of fusing powdered glass to copper, steel or silver resulting in a glossy, colorful finish. Students in this class will gain a clear understanding on how to work with glass on metal through the exploration of enameling techniques such asstenciling, sgraffito, cloisonné, and champlevé. We will work with both flat and formed pieces to create jewelry and sculptural objects. Previous metal work experience is beneficial, however the only prerequisite is fearlessness to experiment.
Sponsor(s): Materials Science and Engineering
Contact: Tara Fadenrecht, 4-003, tfade@mit.edu
Jan/06 | Mon | 03:00PM-05:30PM | 8-014 |
Jan/07 | Tue | 03:00PM-05:30PM | 8-014 |
Jan/13 | Mon | 03:00PM-05:30PM | 8-014 |
Jan/14 | Tue | 03:00PM-05:30PM | 8-014 |
Jan/20 | Mon | 03:00PM-05:30PM | 8-014 |
Jan/21 | Tue | 03:00PM-05:30PM | 8-014 |
Jan/27 | Mon | 03:00PM-05:30PM | 8-014 |
Jan/28 | Tue | 03:00PM-05:30PM | 8-014 |
Professor Linn W. Hobbs, MIT Professor
Jan/22 | Wed | 07:00PM-10:00PM | 6-104 Chipman Room |
Jan/23 | Thu | 07:00PM-10:00PM | 6-104 Chipman Room |
Jan/27 | Mon | 07:00PM-10:00PM | 6-104 Chipman Room |
Jan/29 | Wed | 07:00PM-10:00PM | 6-104 Chipman Room |
Jan/30 | Thu | 07:00PM-10:00PM | 6-104 Chipman Room |
Enrollment: Advance sign up required (See contact)
Limited to 60 participants
Attendance: Repeating event, particpants welcome at any session
Prereq: Participants must be age 21 or older on 1/22/14. ID required
Fee: $190.00
for wines, crackers and extensive tasting notes
Harvard cannot lay claim to all verities! This high quality introductory class in wine appreciation—long an IAP classic now in its 33rd year, with nearly 2500 enthusiastic alumnae/i—will acquaint participants with the truth about wines from around the world through comparative tastings of about 60 fine wines.
This is the last year that In Vino Veritas will be offered.
It is perennially and quickly oversubscribed, so immediate registration is advised. Payment of fee with registration.
Sponsor(s): Materials Science and Engineering
Contact: Gabrielle Joseph, 13-4062, 3-6970, gaj@mit.edu
Tara Fadenrecht, Technical Instructor
Enrollment: Limited: Advance sign-up required
Sign-up by 01/06
Limited to 4 participants
Attendance: Participants must attend all sessions
Prereq: None
ENROLLMENT CLOSED - CLASS FULL
In this introductory course, students will create wearable art such as pendants and bracelets. Through the jewelry design process, which includes sawing, piercing, forming, stone setting and finishing, students will become comfortable with both hand and power tools. Fabrication techniques including cold connections and soldering will be covered as well.
Sponsor(s): Materials Science and Engineering
Contact: Tara Fadenrecht, 4-003, tfade@mit.edu
Jan/08 | Wed | 03:00PM-05:30PM | 4-010 |
Jan/09 | Thu | 03:00PM-05:30PM | 4-010 |
Jan/15 | Wed | 03:00PM-05:30PM | 4-010 |
Jan/16 | Thu | 03:00PM-05:30PM | 4-010 |
Jan/22 | Wed | 03:00PM-05:30PM | 4-010 |
Jan/23 | Thu | 03:00PM-05:30PM | 4-010 |
Jan/29 | Wed | 03:00PM-05:30PM | 4-010 |
Jan/30 | Thu | 03:00PM-05:30PM | 4-010 |
Mike Tarkanian
Enrollment: Limited to participants with no prior blacksmithing experience.
Attendance: Participants must attend all sessions
Prereq: None
ENROLLMENT CLOSED- CLASS FULL
Students will learn basic blacksmithing techniques using traditional tools to hand-forge mild steel. Drawing a taper, forming a scroll, twisting, and finishing techniques will be incorporated into simple projects.
Sponsor(s): Materials Science and Engineering
Contact: Mike Tarkanian, 8-003, x3-5946, tarky@mit.edu
Jan/06 | Mon | 03:00PM-05:00PM | Room 4 - 003, All participants |
Jan/07 | Tue | 01:00PM-03:00PM | Room 4 - 003 |
Jan/08 | Wed | 03:00PM-05:00PM | Room 4 - 003 |
Jan/09 | Thu | 05:00PM-07:00PM | Room 4 - 003 |
ENROLLMENT CLOSED-CLASS FULL
Students must choose to be a part of group 1, 2 or 3. Mandatory introductory training with demonstration will be held for all participants from 3-5 PM on the first day of each session. At this meeting, students will be assigned to the 1-3, 3-5 or 5-7 PM sections for three consecutive afternoons.
Mike Tarkanian, James Hunter - Course 1
Jan/13 | Mon | 03:00PM-05:00PM | Room 4 - 003, All participants |
Jan/14 | Tue | 01:00PM-03:00PM | Room 4 - 003 |
Jan/15 | Wed | 03:00PM-05:00PM | Room 4 - 003 |
Jan/16 | Thu | 05:00PM-07:00PM | Room 4 - 003 |
ENROLLMENT CLOSED-CLASS FULL
Students must choose to be a part of group 1, 2 or 3. Mandatory introductory training with demonstration will be held for all participants from 3-5 PM on the first day of each session. At this meeting, students will be assigned to the 1-3, 3-5 or 5-7 PM sections for three consecutive afternoons.
Mike Tarkanian, Forrest Whitcher - ChemE Research Engineer
Jan/21 | Tue | 03:00PM-05:00PM | Room 4 - 003, All participants |
Jan/22 | Wed | 01:00PM-03:00PM | Room 4 - 003 |
Jan/23 | Thu | 03:00PM-05:00PM | Room 4 - 003 |
Jan/24 | Fri | 05:00PM-07:00PM | Room 4 - 003 |
ENROLLMENT CLOSED -CLASS FULL
Students must choose to be a part of group 1, 2 or 3. Mandatory introductory training with demonstration will be held for all participants from 3-5 PM on the first day of each session. At this meeting, students will be assigned to the 1-3, 3-5 or 5-7 PM sections for three consecutive afternoons.
Mike Tarkanian, Tara Fadenrecht - Intstructor
Mike Tarkanian
Enrollment: ENROLLMENT CLOSED: CLASS FULL
Attendance: Participants must attend all sessions
Prereq: None
Students in this class will learn the techniques necessary for investment casting metals. We’ll first make models of the items to be cast – either by sculpting wax into the desired shape, or by casting wax into a rubber mold of an existing object. We will then build ceramic shells around the models, burn out the wax, and cast molten bronze, brass or aluminum into the resulting mold.
Sponsor(s): Materials Science and Engineering
Contact: Mike Tarkanian, 8-003, x3-5946, tarky@mit.edu
Jan/06 | Mon | 10:00AM-12:00PM | 8 - 014 |
Jan/07 | Tue | 10:00AM-12:00PM | 8 - 014 |
Jan/08 | Wed | 10:00AM-12:00PM | 8 - 014 |
Jan/09 | Thu | 10:00AM-12:00PM | 8 - 014 |
Jan/10 | Fri | 10:00AM-12:00PM | 8 - 014 |
Applicants should email tarky@mit.edu, and state their group preference when signing up.
ENROLLMENT CLOSED: CLASS FULL
Mike Tarkanian
Jan/06 | Mon | 01:00PM-03:00PM | 8 - 014 |
Jan/07 | Tue | 01:00PM-03:00PM | 8 - 014 |
Jan/08 | Wed | 01:00PM-03:00PM | 8 - 014 |
Jan/09 | Thu | 01:00PM-03:00PM | 8 - 014 |
Jan/10 | Fri | 01:00PM-03:00PM | 8 - 014 |
Applicants should email tarky@mit.edu, and state their group preference when signing up.
ENROLLMENT CLOSED: CLASS FULL
Ike Feitler - Technical Instructor
Jan/21 | Tue | 10:00AM-12:00PM | 8 - 014 |
Jan/22 | Wed | 10:00AM-12:00PM | 8 - 014 |
Jan/23 | Thu | 10:00AM-12:00PM | 8 - 014 |
Jan/24 | Fri | 10:00AM-12:00PM | 8 - 014 |
Applicants should email tarky@mit.edu, and state their group preference when signing up.
ENROLLMENT CLOSED: CLASS FULL
Mike Tarkanian
Jan/21 | Tue | 01:00PM-03:00PM | 8 - 014 |
Jan/22 | Wed | 01:00PM-03:00PM | 8 - 014 |
Jan/23 | Thu | 01:00PM-03:00PM | 8 - 014 |
Jan/24 | Fri | 01:00PM-03:00PM | 8 - 014 |
Applicants should email tarky@mit.edu, and state their group preference when signing up.
ENROLLMENT CLOSED: CLASS FULL
Ike Feitler - Technical Instructor
Michael Tarkanian
Enrollment: ENROLLMENT CLOSED: CLASS FULL
Attendance: Participants must attend all sessions
Prereq: None
This course will cover the basics of welding metals with various techniques: oxyacetylene torches, stick welding (SMAW), MIG (GMAW) and TIG (GTAW) will be explored. The first four instructional sessions will review the procedures and techniques, safety concerns and equipment, and capabilities of each welding methods. Students can then use the final session as time to practice welding or to weld a small project under the supervision of the instructor.
Sponsor(s): Materials Science and Engineering
Contact: Mike Tarkanian, 8-003, x3-5946, tarky@mit.edu
Jan/13 | Mon | 10:00AM-12:00PM | 8 - 014 |
Jan/14 | Tue | 10:00AM-12:00PM | 8 - 014 |
Jan/15 | Wed | 10:00AM-12:00PM | 8 - 014 |
Jan/16 | Thu | 10:00AM-12:00PM | 8 - 014 |
Jan/17 | Fri | 10:00AM-12:00PM | 8 - 014 |
Applicants should email tarky@mit.edu, and state their group preference when signing up.
ENROLLMENT CLOSED: CLASS FULL
Michael Tarkanian
Jan/13 | Mon | 01:00PM-03:00PM | 8 - 014 |
Jan/14 | Tue | 01:00PM-03:00PM | 8 - 014 |
Jan/15 | Wed | 01:00PM-03:00PM | 8 - 014 |
Jan/16 | Thu | 01:00PM-03:00PM | 8 - 014 |
Jan/17 | Fri | 01:00PM-03:00PM | 8 - 014 |
Applicants should email tarky@mit.edu, and state their group preference when signing up.
ENROLLMENT CLOSED: CLASS FULL
Chris DiPerna - Technical Instructor
Jan/13 | Mon | 03:00PM-05:00PM | 8 - 014 |
Jan/14 | Tue | 03:00PM-05:00PM | 8 - 014 |
Jan/15 | Wed | 03:00PM-05:00PM | 8 - 014 |
Jan/16 | Thu | 03:00PM-05:00PM | 8 - 014 |
Jan/17 | Fri | 03:00PM-05:00PM | 8 - 014 |
Applicants should email tarky@mit.edu, and state their group preference when signing up.
ENROLLMENT CLOSED: CLASS FULL
Chris DiPerna - Technical Instructor
Jan/27 | Mon | 10:00AM-12:00PM | 8 - 014 |
Jan/28 | Tue | 10:00AM-12:00PM | 8 - 014 |
Jan/29 | Wed | 10:00AM-12:00PM | 8 - 014 |
Jan/30 | Thu | 10:00AM-12:00PM | 8 - 014 |
Jan/31 | Fri | 10:00AM-12:00PM | 8 - 014 |
Applicants should email tarky@mit.edu, and state their group preference when signing up.
ENROLLMENT CLOSED: CLASS FULL
Michael Tarkanian
Jan/27 | Mon | 01:00PM-03:00PM | 8 - 014 |
Jan/28 | Tue | 01:00PM-03:00PM | 8 - 014 |
Jan/29 | Wed | 01:00PM-03:00PM | 8 - 014 |
Jan/30 | Thu | 01:00PM-03:00PM | 8 - 014 |
Jan/31 | Fri | 01:00PM-03:00PM | 8 - 014 |
Applicants should email tarky@mit.edu, and state their group preference when signing up.
ENROLLMENT CLOSED: CLASS FULL
Chris DiPerna - Technical Instructor
Contact Information
COPYRIGHT 2014