|
Unigraphics
Solutions CAD Software Download for MIT Academic Use |
|
UGS v18 is available for general use on almost all the machines
in the Mechanical Engineering "MechEng" academic computing
domain (the exception being the computers in the Undergraduate Control
Systems Laboratory).
In addition,
under the terms of the departmental license, the software may be
downloaded from our server to individual PC's on the MIT campus.
A limited number of free training coupons are available for faculty
members. Please contact the MIT
PACE Coordinator if you are interested in training.
|
Restrictions
on use
|
The terms of
the license from Unigraphics Inc.specify that this software is
for educational/classroom use only. Unigraphics has asked
specifically that this code not be used for consulting and sponsored
research use. Separate licenses should be obtained from Unigraphics
for such use. You are welcome to download and use this software
if you agree to these restrictions.
|
Availability
|
This software
is "license served", allowing up to 100 concurrent users.
Downloading and installing the code on your PC is not sufficient
for general use - to use it you must be actively connected to the
internet via a valid MIT IP address of the form 18.*.*.*
When you start UGS it requests a license token from the server,
and when this is granted the program loads. Your machine will
regularly contact the server during operation for validation of
the license. Should you disconnect from the internet, the
program will fail. The software will run from machines on
campus, and remotely through MIT's Tether dialup connection.
It will not run remotely through an independent ISP, or through
cable TV connections such as Media One Road Runner, since this would
be off the MIT network.
|
Contents
|
The educational
package includes a large number of UG modules.
You may opt to load all or part of the package. This
version not supported under any other OS than Windows 2000.
|
Support
|
The Mechanical
Engineering Department does not guarantee that you will be able
to download or install this software on your computer, nor that
it will run on your system.
Do not contact UGS! As part of the license agreement we have
agreed that only one designated person will contact UGS. Therefore
you may not seek Technical Support directly.
Problems should be reported to me-computing@mit.edu.
|
Installation
(2000)
|
Instructions
are for installation directly from the Mechanical Engineering NT
server meche2.mit.edu at IP address 18.80.0.100 from the
shared folder "UGS_18". You may run the setup
program directly from the server using the step outlined below.
Alternatively, you may copy the UGS_18 Folder to a temporary space
on you computer and run the setup program locally.
|
|
|