Vision and Mission
Members
Programme Co-Chair
Messages
Milestones
Programmes
Research
Participation
Job Placements
Admissions
Faculty and Staffs
Students
New Initiatives
Events

 
Conference Publication
Yuan M. L., Xie M. & Yin X. M., “Robust Cooperative Strategy for Contour Matching using Epipolar Geometry”, Asian Conference on Computer Vision, Melbourne, Australia, 23-25 January 2002.

Conference Publications

  1. Yan Y., Chan-Park B. E. M., Chew P. C. & Yue C. Y., “Surface Characterization of Epoxy Films Modified by Surface Graft Copolymerization with Various Nitrogen-Containing Monomers”, International Conference on Materials for Advanced Technologies, pp. 410 Singapore, 7-12 December 2003.

  2. Yeo L. P., Lam Y. C., Chan-Park B. E. M., Joshi S. C. & Hardt D. E., “Demolding of High Aspect Ratio Polymeric Micro-Patterning”, The 2nd International Conference on Technological Advances of Thin Films and Surface Coatings & The 1st International Conference on Nanotechnology, Singapore, 13-17 July 2004.

Modeling for Particle Migration in Concentrated Suspension Flow

Journal Publications

  1. 1. Chen X., Lam Y. C., Tan K. W., Jan M., Tam K. C. & Yu S. C. M., “Experimental Measurements and Simulation of Particle Migration in a Pressure-Driven Tube Flow: Applications to Flow In Runners”, Journal of Injection Molding Technology, Vol. 6, No. 1, pp. 45-57.

  2. Chen X., Lam Y.C., Tan K.W., Ma J., Tam K.C. & Yu S.C.M., “Shear-Induced Particle Migration in a Pressure Driven Tube Flow”, Key Engineering Materials, Vol. 227, pp. 183-188 (2002).

  3. Chen X., Lam Y. C., Tan K. W., Tam K. C., & Yu S. C. M., “Shear-Induced Particle Migration Modeling in a Connected Suspension Flow”, Modeling and Simulation in Materials Science and Engineering, Vol. 11, pp. 503-522 (2003).

  4. Lam Y. C., Chen X., Tam K. C. & Yu S. C. M., “Simulation of Particle Migration of Powder-Resin System in Injection Molding”, ASME Transaction Journal of Manufacturing Science and Engineering, Vol. 125 (3), pp. 538-547 (2003).

  5. Tan K. W., Chen X., Lam Y. C., Ma J. & Tam K. C., “Experimental Investigation of Shear-Induced Particle Migration in Steady-State Isothermic Extrusion”, Journal of the Society of Rheology, Vol. 31 (3), pp.165-173 (2003).

  6. Tan K. W., Lam Y. C., Chen X., Ma J. & Tam K. C., “Shear-Induced Particle Migration in Suspension in a Capillary Pressurized Driven Circular Tube Flow”, Materials Science Forum, Vol. 437-4, pp. 341-344 (2003).

  7. Lam Y. C., Chen X., Tam K. C. & Yu S. C. M., “Numerical Investigation on Particle Migration in Poiseuille Flow of Composite System”, Composite Science and Technology (accepted).

Conference Publications

  1. 1. Chen X., Tan K. W., Lam Y. C., Ma J. & Tam K. C., “Shear-Induced Particle Migration in Suspension in a Capillary Pressurized Driven Circular Tube Flow”, The 2nd International Conference on Advanced Materials Processing, Singapore, 2-4 December 2002.

  2. Chen X., Lam Y. C., Tan K. W. & Chai J. C., “Transverse Particle Migration of Highly Filled Polymer Fluid Flow in a Pipe”, Singapore-MIT Alliance Annual Symposium, Singapore, 16-17January 2003.

  3. Chen X., Lam Y. C., Tan K. W., Chai J. C., & Yu S. C. M., “Non-Isothermal Analysis on Particle Migration of Concentrated Suspension in Poiseuille Flow”, The 6th ASME-JSME on Thermal Engineering Joint Conference, USA, 16-20 March 2003.

  4. Chen X., Lam Y. C., Tan K. W. & Wang Z. Y., “Determination of Phenomenological Constants of Shear-Induced Particle Migration Model”, 2nd International Conference on Materials for Advanced Technologies, Singapore, 7-12 December 2003.

  5. Chen X. & Lam Y. C., “An Analytical Soluton on Convective and Diffusive Transport of Analyte in Laminar Flow of Microfluidic Slit”, Singapore-MIT Alliance Annual Symposium, 16-17 January 2003.

Plant Location

Journal Publication
Bhatnagar R., Jayaram J. & Yue C. P., “Relative Importance of Plant Location Factors: A Cross National Comparison between Singapore and Malaysia”, Journal of Business Logistics, Vol. 24, No. 1, pp. 147-170.

Rapid Prototying and its Application in 3D Micro-Fabrication

Journal Publications

  1. 1. Tang Y. X., Fuh J. Y. H., Lu L., Wong Y. S., Loh H. T. & Gupta M., “Formation of Electrical Discharge Machining Electrode via Laser Cladding”, Rapid Phototyping Journal, Vol. 8, No. 5, pp. 315-319 (2002).

  2. Fuh J. Y. H., Lu L., Zhu H. H., Wong Y. S., Loh H. T., Tang Y. X. & Wang X. H., “Advanced High-Temperature Laser Manufacturing Systems”, Materials Technology and Advanced Performance Materials, Vol. 17, No. 4, pp. 211- 214 (2002).

  3. Tang Y. X., Lu L., Fuh J. Y. H., Loh H. T., Wong Y. S. & Ng C. H., “Laser Reactive Formation of Ti/TiN in Situ Composite”, Materials Science Forum, Vol. 437-438, pp. 301-304 (2003).

  4. Tang Y. X., Fuh J. Y. H., Loh H. T., Wong Y. S. & Lu L., “Direct Laser Sintering of a Silica Sand”, Materials & Design, Vol. 24, Issue 8, pp. 623-629 (2003).

  5. Tang Y. X., Loh H. T., Wong Y. S., Fuh J. Y. H., Lu L. & Wang X. H., “Direct Laser Sintering of a Copper-Based Alloy for Creating Three-Dimensional Metal Parts”, Journal of Materials Processing Technology, Vol. 140, Issue 1, pp. 368-372 (2003).

Conference Publications
  1. Tang Y. X., Loh H. T., Fuh Y. H. J., Wong Y. S. & Lee S. H., “Segmentation of Dimensionally-Large Rapid Prototyping Objects”, Proceedings of The 3rd Singapore-MIT Alliance Annual Symposium, Singapore, 17-18 January 2003.

  2. Tang Y. X., Fuh Y. H. J., Loh H. T., Wong Y. S. & Ng C. H., “Laser Reactive Formation of Ti/TiN In-situ Composite”, The 2nd International Conference on Advanced Materials Processing, Singapore, 2-4 December 2002.

  3. Tang Y. X., Loh H. T., Fuh J. Y. H., Wong Y. S., Lu L., Ning Y. & Wang X. H., “Accuracy Analysis and Improvement for Direct Laser Sintering”, Singapore-MIT Alliance Annual Symposium, Singapore, 19-20 January 2004.

Robotics and Vision

Book
Xie M., 2003, “Fundamentals of Robotics”, World Scientific, 726 pages.

Journal Publication
Yin X. M. & Xie M., “Estimation of the Fundamental Matrix from Uncalibrated Stereo Hand Images for 3D Hand Gesture Recognition”, Pattern Recognition, Vol. 36, pp. 567-584 (2003).

Conference Publications

  1. Kandhasamy J. S. & Xie M., “Image-Guided Planning and Control of Flying Vehicle”, 7th International Conference on Control, Automation, Robotics and Vision, Singapore, 2002.

  2. Yuan M. & Xie M., “An Incremental Representation of Conceptual Symbols
    using RCE Neural Networks”, IEEE International Conference on Development and Learning, pp. 102-107, USA, 2002.

  3. Xie M., “A Developmental Principle for Robotic Hand-Eye Coordination Skill”, IEEE International Conference on Development and Learning, pp. 108-113, USA, 2002.

Self-Organized Formation of Micro and Nano-Structures via Focused Ion Beam Technology

Journal Publications

  1. Fu Y., Ngoi K. A. B. & Shen Z., “A Novel Harmless Trimming for Micro- Device with Defects and Particles in Arbitrary Geometry by Fine Milling of Focused Ion Beam”, Microelectronics Journal, Vol. 35 (2), pp. 111-115 (2004).

  2. . Fu Y. & Ngoi K. A. B., “Self-Organized Formation of a Blaze Grating Like Structure on Si(100) Induced by Focused Ion Beam Scanning”, Optics Express, Vol. 12, No. 2, pp. 227-233 (2004).

Conference Publication
Fu Y., Ngoi K. A. B., Zhou W., Xie D. & Lim B. H., “Investigation of Surface Features on BK7 Glass via Focused Ion Beam Bombardment”, International Conference on Precision Engineering 2004, Singapore, 2 March 2004.

Smart Actuator and Micro/Nano Manipulation

Conference Publications

  1. Lim C. K. & Chen I. M., “Systematic Design and Prototyping of a Disc- Typed Traveling Wave Ultrasonic Motor”, IEEE/ASME Advanced Intelligent Mechatronics, Kobe, Japan, 2003.

  2. Pham H. H. & Chen I. M., “Optimal Design for Workspace and Manipulability of Flexure Parallel Mechanism”, 11th World Congress in Mechanism and Machine Science, Tianjin, China, 2003.

Smart and Mechatronics Products

Conference Publication
Yuan M. L. & Xie M., “An Incremental Representation of Conceptual Symbols using RCE Neural Networks”, IEEE International Conference on Development and Learning, MIT, 12-15 June 2002.

Unmanned Factory

Conference Publication
Yuan M. L., Xie M. & Yin X. M., “Robust Cooperative Strategy for Contour Matching using Epipolar Geometry”, Asian Conference on Computer Vision, Melbourne, Australia, 23-25 January 2002.

 
 
  
< back   next