Next week's schedule:
- Tue: lecture. CIM workshop - required attendance
- Tue: 7pm Project kickoff: Grier Room 34-401 - pizza! Want to talk about your final project? The staff can help
you brainstorm.
- Thu: lecture
Week of October 5, 2015
- This week's to-do list:
- Tue: lecture, LPset #7 issued, upload by Fri 10/9 23:59
- Tue: finish Lab 3 and checkoff
- Thu: lecture
- Lab 4 is a long and difficult lab. Be sure to start early!
- Next week's schedule:
- Sun: lab closed
- Mon: Columbus Day - holiday (lab open 1-11:45pm)
- Tue: Monday class schedule
- Thu: lecture as usual; finish Lab 4 and checkoff
- Project kickoff - Tue 10/20 7PM Grier - pizza!
Week of September 28, 2015
- This week's to-do list:
- Upload your lab 2 (1a) (2) Verilog.
We'll be looking for proper use of comments and formatting to make your code easy to understand. Verilog
for labs 3,4,5 will be graded. Resubmission of Verilog for regrading allowed only for lab 3.
- Tue: lecture, LPSet #5 due
- Thu: lecture, LPset #6 due
- Lab 3 has been issued.
Checkoff Tue 10/6.
Week of September 21, 2015
- This week's to-do list:
- Tue: lecture, LPSet #3 due
- Thu: lecture, LPSet #4 due
- Thu: Lab 2 checkoff (you can check off as each section is completed)
- We will be giving demos in the 6.111 lab (38-600) on how
to use the labkit and information on lab2.
- Monday, 9/21, at 7pm and 8pm
Week of September 14, 2015
- This week's to-do list:
- Tue: lecture, LPSet #1 due
- Thu: lecture, LPSet #2 due
- Thu: Lab 1 checkoff completed.
As you complete each exercise(s) you may check off with any staff in the lab SMTWR.
When all sections are completed your grade will entered.
Staffed hours are posted on the website.
- We will be giving demos in the 6.111 lab (38-600) on how to use
the logic analyzer and labkit -- info you'll want to know for completing
the labs. Here's the demo schedule (each demo is offered multiple times):
- Oscilloscope and Logic Analyzer Intro:
- Monday, 9/14: 7pm and 8:00pm
- Labkit and Verilog Intro:
- Thusrday, 9/17: 7pm and 8pm
- Sun, 9/20: 7pm and 8pm
- Monday, 9/21: 7pm and 8pm
- Lab 2 has been posted. As you complete
each exercise check off with any staff in the lab.
- Please post your questions and comments on Piazza. We will try to respond quickly. If
you are not enrolled, click on the "Piazza" link to the left.
Week of September 7, 2015
- This week's to-do list:
- Thu: lecture
- Fill out information form in Thu lecture
- Get started on Lab #1 (see below)
- The first meeting of 6.111 will be at lecture on Thursday,
9/10 at 2:30p in 32-124.
Consult the Course calendar
for schedule of lectures and labs.
- Please take a moment to read the
Course info page which describes course
mechanics, labs, final project, key dates, grading and policies.
- We will be giving demos in the 6.111 lab (38-600) on how to use
the logic analyzer and FPGA labkit -- info you'll want to know for completing
the labs!
- Bring the Tool Kit Signout form
to John Sweeney (38-501) to check out a kit of parts, tools and test
equipment leads you'll need to work on the labs. The lockers are located
in Bldg 38 sixth floor hallway.
Here's the demo schedule (each demo is offered multiple times):
- Oscilloscope and Logic Analyzer Intro:
- Sun, 9/13, at 4pm and 5pm
- Monday, 9/14, at 7pm and 8pm
- FPGA Labkit Intro:
- Thursday, 9/17, at 7pm and 8pm
- Monday, 9/21, at 7pm and 8pm
Fall 2015 6.111 site
See the links on the left for more information.
Note the
information is tentative and will be finalized by start of class.