The Rust Programming Language

The first collection type we’ll look at is Vec<T>, also known as a vector. Vectors allow us to store more than one value in a single data structure that puts all the values next to each other in memory. Vectors can only store values of the same type. They are useful in situations in which you have a list of items, such as the lines of text in a file or the prices of items in a shopping cart.

To create a new, empty vector, we can call the Vec::new function as shown in Listing 8-1:

# #![allow(unused_variables)]
#fn main() {
let v: Vec<i32> = Vec::new();
#}

Listing 8-1: Creating a new, empty vector to hold values of type i32

Note that we added a type annotation here. Because we aren’t inserting any values into this vector, Rust doesn’t know what kind of elements we intend to store. This is an important point. Vectors are implemented using generics; we’ll cover how to use generics with your own types in Chapter 10. For now, know that the Vec<T> type provided by the standard library can hold any type, and when a specific vector holds a specific type, the type is specified within angle brackets. In Listing 8-1, we’ve told Rust that the Vec<T> in v will hold elements of the i32 type.

In more realistic code, Rust can often infer the type of value we want to store once we insert values, so you rarely need to do this type annotation. It’s more common to create a Vec<T> that has initial values, and Rust provides the vec! macro for convenience. The macro will create a new vector that holds the values we give it. Listing 8-2 creates a new Vec<i32> that holds the values 1, 2, and 3:

# #![allow(unused_variables)]
#fn main() {
let v = vec![1, 2, 3];
#}

Listing 8-2: Creating a new vector containing values

Because we’ve given initial i32 values, Rust can infer that the type of v is Vec<i32>, and the type annotation isn’t necessary. Next, we’ll look at how to modify a vector.

To create a vector and then add elements to it, we can use the push method as shown in Listing 8-3:

# #![allow(unused_variables)]
#fn main() {
let mut v = Vec::new();

v.push(5);
v.push(6);
v.push(7);
v.push(8);
#}

Listing 8-3: Using the push method to add values to a vector

As with any variable, as discussed in Chapter 3, if we want to be able to change its value, we need to make it mutable using the mut keyword. The numbers we place inside are all of type i32, and Rust infers this from the data, so we don’t need the Vec<i32> annotation.

Like any other struct, a vector will be freed when it goes out of scope, as annotated in Listing 8-4:

# #![allow(unused_variables)]
#fn main() {
{
    let v = vec![1, 2, 3, 4];

    // do stuff with v

} // <- v goes out of scope and is freed here
#}

Listing 8-4: Showing where the vector and its elements are dropped

When the vector gets dropped, all of its contents will also be dropped, meaning those integers it holds will be cleaned up. This may seem like a straightforward point but can get a bit more complicated when we start to introduce references to the elements of the vector. Let’s tackle that next!

Now that you know how to create, update, and destroy vectors, knowing how to read their contents is a good next step. There are two ways to reference a value stored in a vector. In the examples, we’ve annotated the types of the values that are returned from these functions for extra clarity.

Listing 8-5 shows both methods of accessing a value in a vector either with indexing syntax or the get method:

# #![allow(unused_variables)]
#fn main() {
let v = vec![1, 2, 3, 4, 5];

let third: &i32 = &v[2];
let third: Option<&i32> = v.get(2);
#}

Listing 8-5: Using indexing syntax or the get method to access an item in a vector

Note two details here. First, we use the index value of 2 to get the third element: vectors are indexed by number, starting at zero. Second, the two different ways to get the third element are by using & and [], which gives us a reference, or by using the get method with the index passed as an argument, which gives us an Option<&T>.

The reason Rust has two ways to reference an element is so you can choose how the program behaves when you try to use an index value that the vector doesn’t have an element for. As an example, let’s see what a program will do if it has a vector that holds five elements and then tries to access an element at index 100, as shown in Listing 8-6:

# #![allow(unused_variables)]
#fn main() {
let v = vec![1, 2, 3, 4, 5];

let does_not_exist = &v[100];
let does_not_exist = v.get(100);
#}

Listing 8-6: Attempting to access the element at index 100 in a vector containing 5 elements

When you run this code, the first [] method will cause a panic! because it references a nonexistent element. This method is best used when you want your program to consider an attempt to access an element past the end of the vector to be a fatal error that crashes the program.

When the get method is passed an index that is outside the vector, it returns None without panicking. You would use this method if accessing an element beyond the range of the vector happens occasionally under normal circumstances. Your code will then have logic to handle having either Some(&element) or None, as discussed in Chapter 6. For example, the index could be coming from a person entering a number. If they accidentally enter a number that’s too large and the program gets a None value, you could tell the user how many items are in the current vector and give them another chance to enter a valid value. That would be more user-friendly than crashing the program due to a typo!

When the program has a valid reference, the borrow checker enforces the ownership and borrowing rules (covered in Chapter 4) to ensure this reference and any other references to the contents of the vector remain valid. Recall the rule that states we can’t have mutable and immutable references in the same scope. That rule applies in Listing 8-7 where we hold an immutable reference to the first element in a vector and try to add an element to the end, which won’t work:

let mut v = vec![1, 2, 3, 4, 5];

let first = &v[0];

v.push(6);

Listing 8-7: Attempting to add an element to a vector while holding a reference to an item

Compiling this code will result in this error:

error[E0502]: cannot borrow `v` as mutable because it is also borrowed as immutable
 -->
  |
4 |     let first = &v[0];
  |                  - immutable borrow occurs here
5 |
6 |     v.push(6);
  |     ^ mutable borrow occurs here
7 |
8 | }
  | - immutable borrow ends here

The code in Listing 8-7 might look like it should work: why should a reference to the first element care about what changes at the end of the vector? The reason behind this error is due to the way vectors work: adding a new element onto the end of the vector might require allocating new memory and copying the old elements to the new space if there isn’t enough room to put all the elements next to each other where the vector was. In that case, the reference to the first element would be pointing to deallocated memory. The borrowing rules prevent programs from ending up in that situation.

Note: For more on the implementation details of the Vec<T> type, see “The Rustonomicon” at https://doc.rust-lang.org/stable/nomicon/vec.html.

If we want to access each element in a vector in turn, we can iterate through all of the elements rather than use indexes to access one at a time. Listing 8-8 shows how to use a for loop to get immutable references to each element in a vector of i32 values and print them out:

# #![allow(unused_variables)]
#fn main() {
let v = vec![100, 32, 57];
for i in &v {
    println!("{}", i);
}
#}

Listing 8-8: Printing each element in a vector by iterating over the elements using a for loop

We can also iterate over mutable references to each element in a mutable vector in order to make changes to all the elements. The for loop in Listing 8-9 will add 50 to each element:

# #![allow(unused_variables)]
#fn main() {
let mut v = vec![100, 32, 57];
for i in &mut v {
    *i += 50;
}
#}

Listing 8-9: Iterating over mutable references to elements in a vector

To change the value that the mutable reference refers to, we have to use the dereference operator (*) to get to the value in i before we can use the += operator .

At the beginning of this chapter, we said that vectors can only store values that are the same type. This can be inconvenient; there are definitely use cases for needing to store a list of items of different types. Fortunately, the variants of an enum are defined under the same enum type, so when we need to store elements of a different type in a vector, we can define and use an enum!

For example, let’s say we want to get values from a row in a spreadsheet where some of the columns in the row contain integers, some floating-point numbers, and some strings. We can define an enum whose variants will hold the different value types, and then all the enum variants will be considered the same type: that of the enum. Then we can create a vector that holds that enum and so, ultimately, holds different types. We’ve demonstrated this in Listing 8-10:

# #![allow(unused_variables)]
#fn main() {
enum SpreadsheetCell {
    Int(i32),
    Float(f64),
    Text(String),
}

let row = vec![
    SpreadsheetCell::Int(3),
    SpreadsheetCell::Text(String::from("blue")),
    SpreadsheetCell::Float(10.12),
];
#}

Listing 8-10: Defining an enum to store values of different types in one vector

The reason Rust needs to know what types will be in the vector at compile time is so it knows exactly how much memory on the heap will be needed to store each element. A secondary advantage is that we can be explicit about what types are allowed in this vector. If Rust allowed a vector to hold any type, there would be a chance that one or more of the types would cause errors with the operations performed on the elements of the vector. Using an enum plus a match expression means that Rust will ensure at compile time that we always handle every possible case, as discussed in Chapter 6.

If you don’t know the exhaustive set of types the program will get at runtime to store in a vector when you’re writing a program, the enum technique won’t work. Instead, you can use a trait object, which we’ll cover in Chapter 17.

Now that we’ve discussed some of the most common ways to use vectors, be sure to review the API documentation for all the many useful methods defined on Vec<T> by the standard library. For example, in addition to push, a pop method removes and returns the last element. Let’s move on to the next collection type: String!