Annual Report Homepage   Previous Next
SMA Logo & Rationale
Front Cover Design
Preamble
Vision & Mission
Committee Members & Directors
Programme Co-Chairs
Messages
Milestones
Programmes
Research
Particpation by Industry & NRIs
Job Placement
Admissions
Faculty & Staff
Students & Alumni
Events
 
     
  AMM&NS Programme  
     
  HPCES Programme  
     
  IMST Programme  
     
  MEBCS Programme  
     
  CS Programme  
     
     
Publications
     
 
To date, SMA Fellows have published 366 articles in 289 journals while 51 articles have been accepted for publication in 43 journals. Some articles are listed under more than one category.
 
     
 

AMM&NS Programme

 
     
  prev prev 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 next next  
     
  Other SMA Research Projects  
     
 

Growth and Characterization of Epitaxial Ferroelectric Thin Films Prepared by Pulsed Laser Deposition

Journal Publications

  1. Zhu T. J., Zhao X. B. & Lu L., “Kinetic Analysis of Phase Transformation in FeSi2 and Fe2Si5 Based Thermoelectric Alloys”, Philosophy Magazine B (2003), Vol. 83, pp. 2865-2873 (2003).

  2. Zhu T. J. & Lu L., “X-ray Diffraction and Photoelectron Spectroscopic Studies of (001)-Oriented Pb(Zr.52Ti.48)O3 Thin Films Prepared by Laser Ablation”, Journal of Applied Physics, Vol. 95(1), pp. 241-247 (2004).

  3. Zhu T. J. & Lu L., “Growth and Characterization of (001)-Oriented Pb(Zr0.52Ti0.48)O3/LaNiO3/LaAlO3 Heterostructures Prepared by Pulsed Laser Deposition”, Applied Physics A, Vol. 83, pp. 2865-2873 (2003).

  4. Zhu T. J. & Lu L., “Improvement of Pb(Zr0.52Ti0.48)O3 Thin Films with LaNiO3 as Bottom Electrodes”, Transactions Materials Research Society of Japan, Vol. 29, pp. 1377-1380 (2004).

  5. Zhu T. J. & Lu L., “Pulsed Laser Deposition and Characterization of (001)-Oriented Pb(Zr0.52Ti0.48)O3/LaNiO3 Heterostructures”, Transactions Materials Research Society of Japan, Vol. 29, pp. 1373-1376 (2004).

Conference Publications

  1. Zhu T. J., Zhao X. B. & Lu L., “Preparation and Thermoelectric Properties of Melt-Spun Fe2Si5 Based Alloys”, presented in The 2nd International Conference on Advanced Materials Processing 2002, Vols. 437-438 (2003), pp. 471-474, Singapore, 2-4 December 2002.

  2. Zhu T. J., Lu L. & Thompson C. V., “Orientation of MgO Thin Films Prepared by Pulsed Laser Deposition on Si(001)”, presented at The 2nd Singapore-MIT Alliance Annual Symposium, Singapore, 14-16 January 2003.

  3. Zhu T. J. & Lu L., “Pulsed Laser Deposition and Characterization of (001)- oriented Pb(Zr0.52Ti0.48)O3/LaNiO3 Heterostructures”, The 8th IUMRS International Conference on Advanced Materials, Yokohama, Japan, 8-13 October 2003.

Mechanical Behavior of Bulk Metallic Glasses

Journal Publications

  1. Ramamurty U., Lee M. L., Basu J. & Li Y., “Embrittlement of a Bulk Metallic Glass Due to Low-Temperature Annealing”, Scripta Materialia, Vol. 47, Issue 2, pp. 107-111 (2002).

  2. Zhang Y., Yao B., Tan H. & Li Y., “The Eutectic Point of Pr-rich Pr-Cu-Al Ternary Alloy”, Journal of Alloys and Compounds, Vol. 333, No. 1-2, pp. 113-117 (2002).

  3. Tan H., Zhang Y., Hu X. & Li Y., “Synthesis of Crystalline Phase Reinforced Bulk Metallic Glass Matrix Composite in La and Pd Based Alloys”, Ann. Chim. Sci. Mat., Vol. 27, No. 5, pp. 119-124 (2002).

  4. Tan H., Zhang Y. & Li Y., “Synthesis of La-based In-Situ Bulk Metallic Glass Matrix Composite”, Intermetallics, Vol. 10, pp. 1203-1205 (2002).

  5. Zhang Y., Li Y., et al, “Glass Forming Ability of Pr-(Cu, Ni)-Al Alloys in Eutectic System”, Journal of Materials Research, Vol. 18, No. 3, pp. 664-671 (2003).

  6. Tan H., Zhang Y., Feng Y. P. & Li Y., “Synthesis of a La-based Bulk Metallic Glass Matrix Composite”, Philosophical Magazine Letters, Vol. 84, No. 1, pp. 53-61 (2004). 7. Zhang Y., Wang W.H., et al, “Glass Forming Properties of Zr-based Bulk Metallic Alloys”, Journal of Non-Crystalline Solids, Vol. 315, pp. 206-210 (2003).

  7. Tan H., Zhang Y., Ma D., Feng Y. P. & Li Y., “Optimum Glass Formation at Off Eutectic Composition and its Relation to Skewed Eutectic Coupled Zone in the La Based La-Al-(Cu, Ni) Pseudo Ternary System”, Acta Materialia, Vol. 51, pp. 4551-4561 (2003).

Conference Publications

  1. Zhang Y., Tan H. & Li Y., “Bulk Glass Formation of 12 mm Rod in La-Cu-Ni-Al Alloys”, presented at The International Conference of RQ11, Oxford, UK, 25-30 August 2002.

  2. Tan H., Zhang Y. & Li Y., “La-Al-Cu-Ni Bulk Metallic Glass Composite”, Invited Talk at The International Conference of Bulk Metallic Glass II, Keelung, Taiwan, 22-30 March 2002.
 
     
  prev prev 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 next next  
     
Back to Top   Previous Next