The Rust Programming Language

Back in Chapter 10 in the “Validating References with Lifetimes” section, we learned how to annotate references with lifetime parameters to tell Rust how lifetimes of different references relate. We saw how every reference has a lifetime but, most of the time, Rust will let you elide lifetimes. Here we’ll look at three advanced features of lifetimes that we haven’t covered yet:

• Lifetime subtyping, a way to ensure that one lifetime outlives another lifetime
• Lifetime bounds, to specify a lifetime for a reference to a generic type
• Trait object lifetimes, how they’re inferred, and when they need to be specified

Lifetime subtyping is a way to specify that one lifetime should outlive another lifetime. To explore lifetime subtyping, imagine we want to write a parser. We’ll have a structure called Context that holds a reference to the string we’re parsing. We’ll write a parser that will parse this string and return success or failure. The parser will need to borrow the context to do the parsing. Implementing this would look like the code in Listing 19-12, except this code doesn’t have the required lifetime annotations so it won’t compile:

Filename: src/lib.rs

struct Context(&str);

struct Parser {
    context: &Context,
}

impl Parser {
    fn parse(&self) -> Result<(), &str> {
        Err(&self.context.0[1..])
    }
}

Listing 19-12: Defining a parser without lifetime annotations

Compiling the code results in errors saying that Rust expected lifetime parameters on the string slice in Context and the reference to a Context in Parser.

For simplicity’s sake, our parse function returns a Result<(), &str>. That is, it will do nothing on success, and on failure will return the part of the string slice that didn’t parse correctly. A real implementation would have more error information than that, and would actually return something when parsing succeeds, but we’ll leave those off because they aren’t relevant to the lifetimes part of this example.

To keep this code simple, we’re not going to actually write any parsing logic. It’s very likely that somewhere in parsing logic we’d handle invalid input by returning an error that references the part of the input that’s invalid, and this reference is what makes the code example interesting with regards to lifetimes. So we’re going to pretend that the logic of our parser is that the input is invalid after the first byte. Note that this code may panic if the first byte is not on a valid character boundary; again, we’re simplifying the example in order to concentrate on the lifetimes involved.

To get this code compiling, we need to fill in the lifetime parameters for the string slice in Context and the reference to the Context in Parser. The most straightforward way to do this is to use the same lifetime everywhere, as shown in Listing 19-13:

Filename: src/lib.rs

# #![allow(unused_variables)]
#fn main() {
struct Context<'a>(&'a str);

struct Parser<'a> {
    context: &'a Context<'a>,
}

impl<'a> Parser<'a> {
    fn parse(&self) -> Result<(), &str> {
        Err(&self.context.0[1..])
    }
}
#}

Listing 19-13: Annotating all references in Context and Parser with the same lifetime parameter

This compiles fine, and tells Rust that a Parser holds a reference to a Context with lifetime 'a, and that Context holds a string slice that also lives as long as the reference to the Context in Parser. Rust’s compiler error message said lifetime parameters were required for these references, and we have now added lifetime parameters.

Next, in Listing 19-14, let’s add a function that takes an instance of Context, uses a Parser to parse that context, and returns what parse returns. This won’t quite work:

Filename: src/lib.rs

fn parse_context(context: Context) -> Result<(), &str> {
    Parser { context: &context }.parse()
}

Listing 19-14: An attempt to add a parse_context function that takes a Context and uses a Parser

We get two quite verbose errors when we try to compile the code with the addition of the parse_context function:

error[E0597]: borrowed value does not live long enough
  --> src/lib.rs:14:5
   |
14 |     Parser { context: &context }.parse()
   |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ does not live long enough
15 | }
   | - temporary value only lives until here
   |
note: borrowed value must be valid for the anonymous lifetime #1 defined on the function body at 13:1...
  --> src/lib.rs:13:1
   |
13 | / fn parse_context(context: Context) -> Result<(), &str> {
14 | |     Parser { context: &context }.parse()
15 | | }
   | |_^

error[E0597]: `context` does not live long enough
  --> src/lib.rs:14:24
   |
14 |     Parser { context: &context }.parse()
   |                        ^^^^^^^ does not live long enough
15 | }
   | - borrowed value only lives until here
   |
note: borrowed value must be valid for the anonymous lifetime #1 defined on the function body at 13:1...
  --> src/lib.rs:13:1
   |
13 | / fn parse_context(context: Context) -> Result<(), &str> {
14 | |     Parser { context: &context }.parse()
15 | | }
   | |_^

These errors are saying that both the Parser instance that’s created and the context parameter live only from when the Parser is created until the end of the parse_context function, but they both need to live for the entire lifetime of the function.

In other words, Parser and context need to outlive the entire function and be valid before the function starts as well as after it ends in order for all the references in this code to always be valid. Both the Parser we’re creating and the context parameter go out of scope at the end of the function, though (because parse_context takes ownership of context).

To figure out why we’re getting these errors, let’s look at the definitions in Listing 19-13 again, specifically the references in the signature of the parse method:

    fn parse(&self) -> Result<(), &str> {

Remember the elision rules? If we annotate the lifetimes of the references rather than eliding, the signature would be:

    fn parse<'a>(&'a self) -> Result<(), &'a str> {

That is, the error part of the return value of parse has a lifetime that is tied to the lifetime of the Parser instance (that of &self in the parse method signature). That makes sense: the returned string slice references the string slice in the Context instance held by the Parser, and the definition of the Parser struct specifies that the lifetime of the reference to Context and the lifetime of the string slice that Context holds should be the same.

The problem is that the parse_context function returns the value returned from parse, so the lifetime of the return value of parse_context is tied to the lifetime of the Parser as well. But the Parser instance created in the parse_context function won’t live past the end of the function (it’s temporary), and context will go out of scope at the end of the function (parse_context takes ownership of it).

Rust thinks we’re trying to return a reference to a value that goes out of scope at the end of the function, because we annotated all the lifetimes with the same lifetime parameter. That told Rust the lifetime of the string slice that Context holds is the same as that of the lifetime of the reference to Context that Parser holds.

The parse_context function can’t see that within the parse function, the string slice returned will outlive both Context and Parser, and that the reference parse_context returns refers to the string slice, not to Context or Parser.

By knowing what the implementation of parse does, we know that the only reason the return value of parse is tied to the Parser is because it’s referencing the Parser’s Context, which is referencing the string slice, so it’s really the lifetime of the string slice that parse_context needs to care about. We need a way to tell Rust that the string slice in Context and the reference to the Context in Parser have different lifetimes and that the return value of parse_context is tied to the lifetime of the string slice in Context.

First we’ll try giving Parser and Context different lifetime parameters as shown in Listing 19-15. We’ll use 's and 'c as lifetime parameter names to be clear about which lifetime goes with the string slice in Context and which goes with the reference to Context in Parser. Note that this won’t completely fix the problem, but it’s a start and we’ll look at why this isn’t sufficient when we try to compile.

Filename: src/lib.rs

struct Context<'s>(&'s str);

struct Parser<'c, 's> {
    context: &'c Context<'s>,
}

impl<'c, 's> Parser<'c, 's> {
    fn parse(&self) -> Result<(), &'s str> {
        Err(&self.context.0[1..])
    }
}

fn parse_context(context: Context) -> Result<(), &str> {
    Parser { context: &context }.parse()
}

Listing 19-15: Specifying different lifetime parameters for the references to the string slice and to Context

We’ve annotated the lifetimes of the references in all the same places that we annotated them in Listing 19-13, but used different parameters depending on whether the reference goes with the string slice or with Context. We’ve also added an annotation to the string slice part of the return value of parse to indicate that it goes with the lifetime of the string slice in Context.

The following is the error we get now when we try to compile:

error[E0491]: in type `&'c Context<'s>`, reference has a longer lifetime than the data it references
 --> src/lib.rs:4:5
  |
4 |     context: &'c Context<'s>,
  |     ^^^^^^^^^^^^^^^^^^^^^^^^
  |
note: the pointer is valid for the lifetime 'c as defined on the struct at 3:1
 --> src/lib.rs:3:1
  |
3 | / struct Parser<'c, 's> {
4 | |     context: &'c Context<'s>,
5 | | }
  | |_^
note: but the referenced data is only valid for the lifetime 's as defined on the struct at 3:1
 --> src/lib.rs:3:1
  |
3 | / struct Parser<'c, 's> {
4 | |     context: &'c Context<'s>,
5 | | }
  | |_^

Rust doesn’t know of any relationship between 'c and 's. In order to be valid, the referenced data in Context with lifetime 's needs to be constrained, to guarantee that it lives longer than the reference with lifetime 'c. If 's is not longer than 'c, the reference to Context might not be valid.

Which gets us to the point of this section: the Rust feature lifetime subtyping is a way to specify that one lifetime parameter lives at least as long as another one. In the angle brackets where we declare lifetime parameters, we can declare a lifetime 'a as usual, and declare a lifetime 'b that lives at least as long as 'a by declaring 'b with the syntax 'b: 'a.

In our definition of Parser, in order to say that 's (the lifetime of the string slice) is guaranteed to live at least as long as 'c (the lifetime of the reference to Context), we change the lifetime declarations to look like this:

Filename: src/lib.rs

# #![allow(unused_variables)]
#fn main() {
# struct Context<'a>(&'a str);
#
struct Parser<'c, 's: 'c> {
    context: &'c Context<'s>,
}
#}

Now, the reference to Context in the Parser and the reference to the string slice in the Context have different lifetimes, and we’ve ensured that the lifetime of the string slice is longer than the reference to the Context.

That was a very long-winded example, but as we mentioned at the start of this chapter, these features are pretty niche. You won’t often need this syntax, but it can come up in situations like this one, where you need to refer to something you have a reference to.

In the “Trait Bounds” section of Chapter 10, we discussed using trait bounds on generic types. We can also add lifetime parameters as constraints on generic types, and these are called lifetime bounds. Lifetime bounds help Rust verify that references in generic types won’t outlive the data they’re referencing.

For an example, consider a type that is a wrapper over references. Recall the RefCell<T> type from the “RefCell<T> and the Interior Mutability Pattern” section of Chapter 15: its borrow and borrow_mut methods return the types Ref and RefMut, respectively. These types are wrappers over references that keep track of the borrowing rules at runtime. The definition of the Ref struct is shown in Listing 19-16, without lifetime bounds for now:

Filename: src/lib.rs

struct Ref<'a, T>(&'a T);

Listing 19-16: Defining a struct to wrap a reference to a generic type; without lifetime bounds to start

Without explicitly constraining the lifetime 'a in relation to the generic parameter T, Rust will error because it doesn’t know how long the generic type T will live:

error[E0309]: the parameter type `T` may not live long enough
 --> src/lib.rs:1:19
  |
1 | struct Ref<'a, T>(&'a T);
  |                   ^^^^^^
  |
  = help: consider adding an explicit lifetime bound `T: 'a`...
note: ...so that the reference type `&'a T` does not outlive the data it points at
 --> src/lib.rs:1:19
  |
1 | struct Ref<'a, T>(&'a T);
  |                   ^^^^^^

Because T can be any type, T could itself be a reference or a type that holds one or more references, each of which could have their own lifetimes. Rust can’t be sure T will live as long as 'a.

Fortunately, that error gave us helpful advice on how to specify the lifetime bound in this case:

consider adding an explicit lifetime bound `T: 'a` so that the reference type
`&'a T` does not outlive the data it points at

Listing 19-17 shows how to apply this advice by specifying the lifetime bound when we declare the generic type T.

# #![allow(unused_variables)]
#fn main() {
struct Ref<'a, T: 'a>(&'a T);
#}

Listing 19-17: Adding lifetime bounds on T to specify that any references in T live at least as long as 'a

This code now compiles because the T: 'a syntax specifies that T can be any type, but if it contains any references, the references must live at least as long as 'a.

We could solve this in a different way, shown in the definition of a StaticRef struct in Listing 19-18, by adding the 'static lifetime bound on T. This means if T contains any references, they must have the 'static lifetime:

# #![allow(unused_variables)]
#fn main() {
struct StaticRef<T: 'static>(&'static T);
#}

Listing 19-18: Adding a 'static lifetime bound to T to constrain T to types that have only 'static references or no references

Because 'static means the reference must live as long as the entire program, a type that contains no references meets the criteria of all references living as long as the entire program (because there are no references). For the borrow checker concerned about references living long enough, there’s no real distinction between a type that has no references and a type that has references that live forever; both of them are the same for the purpose of determining whether or not a reference has a shorter lifetime than what it refers to.

In Chapter 17 in the “Using Trait Objects that Allow for Values of Different Types” section, we discussed trait objects, consisting of a trait behind a reference, that allow us to use dynamic dispatch. We haven’t yet discussed what happens if the type implementing the trait in the trait object has a lifetime of its own. Consider Listing 19-19, where we have a trait Red and a struct Ball. Ball holds a reference (and thus has a lifetime parameter) and also implements trait Red. We want to use an instance of Ball as the trait object Box<Red>:

Filename: src/main.rs

trait Red { }

struct Ball<'a> {
    diameter: &'a i32,
}

impl<'a> Red for Ball<'a> { }

fn main() {
    let num = 5;

    let obj = Box::new(Ball { diameter: &num }) as Box<Red>;
}

Listing 19-19: Using a type that has a lifetime parameter with a trait object

This code compiles without any errors, even though we haven’t said anything explicit about the lifetimes involved in obj. This works because there are rules having to do with lifetimes and trait objects:

• The default lifetime of a trait object is 'static.
• With &'a Trait or &'a mut Trait, the default lifetime is 'a.
• With a single T: 'a clause, the default lifetime is 'a.
• With multiple T: 'a-like clauses, there is no default; we must be explicit.

When we must be explicit, we can add a lifetime bound on a trait object like Box<Red> with the syntax Box<Red + 'a> or Box<Red + 'static>, depending on what’s needed. Just as with the other bounds, this means that any implementor of the Red trait that has references inside must have the same lifetime specified in the trait object bounds as those references.

Next, let’s take a look at some other advanced features dealing with traits!